Lots of great info. Just went to ebay and bought 2 4l80e direct drums. Scored 2 th400 cores the other day that both have parking brake tail housings. Curious to see what's inside. Thanks for the great content as usual.
Thanks for these videos Shawn. Could you do a video on a soick TH400 rebuild? There are so many 800-1,000hp build videos out there with aftermarket valve bodies, and other parts, etc... But not a lot for the average street driven TH400 with less than 500ish hp.
Is a th400 direct drum with sprag the exact same as 80e. Does the outer race set closer to the drum in an 80e. I ordered an 80e drum but the .795 outer race does not set closer, thusly the race retainer does not fit properly. Your opinion would be appreciated. Thanks for all the videos.
can I upgrade my 1994 $l80 direct drum to a 97 and up drum? also have you installed a 4L80 in place of a 400? Im tring to see what all Ill have to modify ( its ain a 4x4. Thanks Subscribed
Is the only reason for 97 and up drum is because it comes with 34 element sprag ? Can you use an older drum and buy the 34 element sprag? Ive found a few on ebay and it doesnt list the year it came out of only the picture. Or is there a way to tell by picture if its 97 and up? Going to be my first build and been watching your videos for a while !
i have a 400 and the direct drum does not have any check balls in the drum nor the piston , will that cause issues in a turbo / transbrake application ?
![เปิดใจ “ต้นหอม ศกุนตลา” หลังโดนพาดพิงธุรกิจที่เคยทำ และผลกระทบทำถูกปลดฟ้าผ่า! | แฉ 24 ต.ค.67 [2/3]](http://i.ytimg.com/vi/vCi5OIqlxaE/mqdefault.jpg)
You’ve probably forgot more about th400s than I’ll ever know. I love these videos.
Bud it has been cooking down here in NC as well. Close to 100 back to back to back. Awesome video thanks.
Great Video. Thanks. Question how do I remove and replace the inner center seal on the 4l80e forward drum? Thanks David
Lots of great info. Just went to ebay and bought 2 4l80e direct drums. Scored 2 th400 cores the other day that both have parking brake tail housings. Curious to see what's inside. Thanks for the great content as usual.
Another informative video,thanks as always for sharing your knowledge bud..
New viewer, well done!
Thanks for these videos Shawn. Could you do a video on a soick TH400 rebuild? There are so many 800-1,000hp build videos out there with aftermarket valve bodies, and other parts, etc... But not a lot for the average street driven TH400 with less than 500ish hp.
Great idea, it’s on the list! Thanks!
@@mountainsgarage thank you Shawn.
I'd like that also. Thanks for the video Shawn. Subscribed
Ross
Chester, Maine
Great video!
Great information
Good information!!!
I'm headed up your way this weekend. Visiting family that lives on the Lake.
Awesome
Tennessee is so humid right now. It’s terrible.
Is a th400 direct drum with sprag the exact same as 80e. Does the outer race set closer to the drum in an 80e. I ordered an 80e drum but the .795 outer race does not set closer, thusly the race retainer does not fit properly. Your opinion would be appreciated. Thanks for all the videos.
can I upgrade my 1994 $l80 direct drum to a 97 and up drum? also have you installed a 4L80 in place of a 400? Im tring to see what all Ill have to modify ( its ain a 4x4. Thanks Subscribed
Is the only reason for 97 and up drum is because it comes with 34 element sprag ? Can you use an older drum and buy the 34 element sprag? Ive found a few on ebay and it doesnt list the year it came out of only the picture. Or is there a way to tell by picture if its 97 and up? Going to be my first build and been watching your videos for a while !
I'm curious on why you didn't cut the piston down.
Just explaining different ways to get the desired result.
I usually cut the piston because I have more thick than thin steels!
Would it be an issue to use the stock 400 outer sprag race with the 4l80 drum? I put it together and it seems like it has some end play.
Have you tried using the molded piston in the forward drum?
You can use a 4L80E molded direct piston in a TH400 forward drum.
Would a 4L80 fit a 83 Chevy K20
It can and has been done .
I have a manual valvebody on the 4L80 so there no electronic. I'm just wondering about the torque converter
i have a 400 and the direct drum does not have any check balls in the drum nor the piston , will that cause issues in a turbo / transbrake application ?
Should have one or the other, I never tried it without.
any part number i could use.im in Canada. i also work for GM .dealership
Good source for a drum if you want one? Or do you sell drums?
Where are u located at
Maine, you?
@@mountainsgarage I’m in Pennsylvania do u ship transmission
@@shawnthomas6782 I try to stay local to avoid that. Not impossible though.
I have a 2000 Silverado 2wd I’m looking for a great th400 is a ls 6.0 with lots of nitrous
Would it be an issue to use the stock 400 outer sprag race with the 4l80 drum? I put it together and it seems like it has some end play.