This video makes it so much clearer. I was scratching my head at the printed instructions. Seeing a visual of the install makes it less daunting. Thanks for this. Can't wait to get this installed on my Taco.
This is the Best of the Best; they have so many add-ons and accessories; you can't top that! I have just ordered mine for a 2007 F150 8foot bed when nobody else had anything similar or available! GREAT JOB GENTLEMEN!
Just installed mine today with the aid of this video. Very informative and easy to follow. The only complaint I have is the audio is difficult to hear. Otherwise outstanding!
Great, informative video. Got my soft topper and installed it in under 45 minutes, super easy. It’s made of great, sturdy material, I was very impressed. I love my soft topper!
Just got my topper and had the same issue with the rail snaps not aligning. After wrestling with it for an hour in the sun and even with my wife’s help, we couldn’t get the last two driver and passenger side snaps to line up. I was worried about breaking something with all the downward pressure I had to apply. So, I decided to do some QC of my own. I measured center-to-center on the rail snaps and compared them to the topper snaps. Sure enough, they didn’t match up. The snaps were misaligned by about 1/2 in give or take. This seems to be an assembly issue on their part. To fix it, I unscrewed the front two driver and passenger side snaps, re-drilled the holes with a 1/8 inch drill bit to align with the topper, screwed the snaps back on the rail, and voilà-problem solved. Hope this helps!
Good job I only saw one mistake the open end of the hook for the safety strap to the back of the truck the sharp part the open-end should be towards the inside of the truck that way if it gets super windy like where I live the hook cant rip The canvas
Should hear me swearing like a sailor here, trying to get the rear snaps to reach! If I ever get this thing snapped on, I am never ever going to want to unsnap it to roll up the sides safari style. Any tips? I am solo. I know another set of hands would be great.
Jesus I just went through this literally minutes ago. I got all but one snapped...the rear right corner. It is EXTREMELY tight. The hair dryer idea is good but I've had it for a couple weeks now so I would think it would be stretched and somewhat loosened up by now.
I just got all of mine snapped in, also very tight. For those reading in the future - tighten the 4 pull straps, multiple times and very tight. When you do that, it’ll be much better.
@@duffweldThanks so much for the hairdryer tip. I put the top on today in 45 degree temp and the hairdryer is what did the trick. All of a sudden the fabric started stretching and I was able to get the snaps fastened!
It's been below 60 F and I cannot stretch the topper to fit. So I bought a space heater and put it inside the truck bed and threw a blanket over the Softtopper. The heat softens the topper such that I can stretch it and have all but 2 snaps together. The remaining snaps are the front on the driver's side and the back one on the passenger's side. I am fairly sure I will be able to get those last two tomorrow.
Apply some heat with a hair dryer to loosen up the canvas or let it sit in the sun and it will eventually stretch. Also, I lowered the pin in the bracket to the lowest point and it helped a lot. Hope this helps.
@ Softopper. Any chance to get a front window with an opening for cabs with a sliding rear window? Have a 2019 Nissan Frontier Pro 4X, and seriously looking at this top.
Your instructions that come with the softopper are different from the video!!! Your video says align the rails flush with the inside wall of the truck bed while the paper instructions say to align it with the front side. The picture clearly shows the thing being aligned to the outside? Which is it???
Not to be a trouble, but I noticed the same thing, I also noticed a bit of water got in the first day I set it up, due to the fact that it's too far back. I additionally noticed that it's not 1/2" from the inside bed closer to the cab. I will have to adjust my next day off, the good thing is, it can be adjusted!
Any avalanche owner who didn't have side rails to start off? Can you explain where the track lays on the Avalanche as we have those side compartments that flip up?
Does anyone forego the clamps and just drill a few holes through the rail and bolt it to the bed rail? I never cared for those kinds of clamps, they make me nervous?
old comment, but I just got mine. A tailgate can be stolen in 10 seconds with no tools. Put a hose clamp around one of the mounts and it's now a 2 minute 1 tool job. To take just the topper, you'd have to unsnap the snaps and pull the pins at the pivot. Zero tools. To steal the rails they'd need a wrench for the clamps. So I think if you secured the pins and the clamps (maybe replace the hex bolts with something more obscure) you could slow someone down and reduce risk.
Hi Pierre! We do offer all of our tops with clear windows. However, we don't offer any of our truck tops with side windows. The vinyl that is used for the windows can be vulnerable in the cold, and those side panels are sewn into the top and not easily replaced. The front and the rear windows for trucks are easily removed and inexpensive to replace. Our SUV tops do come with side windows, and that is only because those vehicles have the Softopper over the passenger compartment as well. Please let me know if you have any other questions.
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 13](http://i.ytimg.com/vi/NlY2uzrALY8/mqdefault.jpg)
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
![[TH] 2024 PMSL SEA Finals D3 | Fall | รู้ผลทีมแชมป์ พร้อมตั๋วสู่ PMGC](http://i.ytimg.com/vi/7NxsN0Ch6vk/mqdefault.jpg)
This video makes it so much clearer. I was scratching my head at the printed instructions. Seeing a visual of the install makes it less daunting. Thanks for this. Can't wait to get this installed on my Taco.
I like how the truck transforms into a 2nd gen. Great informative vid
This is the Best of the Best; they have so many add-ons and accessories; you can't top that! I have just ordered mine for a 2007 F150 8foot bed when nobody else had anything similar or available! GREAT JOB GENTLEMEN!
Just installed mine today with the aid of this video. Very informative and easy to follow. The only complaint I have is the audio is difficult to hear. Otherwise outstanding!
Great, informative video. Got my soft topper and installed it in under 45 minutes, super easy. It’s made of great, sturdy material, I was very impressed. I love my soft topper!
I bought a Softopper for my ram truck and after watching your you tube video the install was a breeze
I was able to install mine without referring to the included instructions thanks to this video. Very informative, thanks!
The instruction document isn't as intuitive, IMO.... this video makes it much better.
They make it look easy
Just got my topper and had the same issue with the rail snaps not aligning. After wrestling with it for an hour in the sun and even with my wife’s help, we couldn’t get the last two driver and passenger side snaps to line up. I was worried about breaking something with all the downward pressure I had to apply.
So, I decided to do some QC of my own. I measured center-to-center on the rail snaps and compared them to the topper snaps. Sure enough, they didn’t match up. The snaps were misaligned by about 1/2 in give or take. This seems to be an assembly issue on their part.
To fix it, I unscrewed the front two driver and passenger side snaps, re-drilled the holes with a 1/8 inch drill bit to align with the topper, screwed the snaps back on the rail, and voilà-problem solved.
Hope this helps!
Good job I only saw one mistake the open end of the hook for the safety strap to the back of the truck the sharp part the open-end should be towards the inside of the truck that way if it gets super windy like where I live the hook cant rip The canvas
Can you give the time stamp of this?
Can't wait to get mine!!
Yeah except when you receive the topper the color markings are out of whack and it’s stupid confusing.
This is fantastic! Thanks
Thanks for sharing, hoping to purchase one of these for my truck. Liked and subscribed
Should hear me swearing like a sailor here, trying to get the rear snaps to reach! If I ever get this thing snapped on, I am never ever going to want to unsnap it to roll up the sides safari style. Any tips? I am solo. I know another set of hands would be great.
Hair dryer to warm it up
Jesus I just went through this literally minutes ago. I got all but one snapped...the rear right corner. It is EXTREMELY tight. The hair dryer idea is good but I've had it for a couple weeks now so I would think it would be stretched and somewhat loosened up by now.
I just got all of mine snapped in, also very tight. For those reading in the future - tighten the 4 pull straps, multiple times and very tight. When you do that, it’ll be much better.
@@duffweldThanks so much for the hairdryer tip. I put the top on today in 45 degree temp and the hairdryer is what did the trick. All of a sudden the fabric started stretching and I was able to get the snaps fastened!
It's been below 60 F and I cannot stretch the topper to fit. So I bought a space heater and put it inside the truck bed and threw a blanket over the Softtopper. The heat softens the topper such that I can stretch it and have all but 2 snaps together. The remaining snaps are the front on the driver's side and the back one on the passenger's side. I am fairly sure I will be able to get those last two tomorrow.
If I’m removing this whole system from one truck to another is it just a matter of undoing the bed rail clamps and moving it over to another vehicle?
So the forward end closest to the back of the cab is actually secured inside the bed? Does this not encourage rain to come in at that location?
I ordered one for my Nissan Frontier pro-4x today. Curious about the tailgate attachment with the weird little wing thing Nissan has.
How about an installation vid for the gen 3 K5 blazer?
This is cool!
I like the video. But unfortunately the snaps on the bars don't fit in the holes. So frustrating
Apply some heat with a hair dryer to loosen up the canvas or let it sit in the sun and it will eventually stretch. Also, I lowered the pin in the bracket to the lowest point and it helped a lot. Hope this helps.
Are able to open the front window a zipper or something
@ Softopper. Any chance to get a front window with an opening for cabs with a sliding rear window? Have a 2019 Nissan Frontier Pro 4X, and seriously looking at this top.
i think they sell that on their website
Yes. It’s called the dog window on their website. I’m thinking of buying one for my Softopper…anyone have one? Likes/dislikes?
Why is getting it to snap in the hardest fucking thing ever
How is the fit with a tailgate pad? can I take the rear bar out and keep the window unrolled?
Your instructions that come with the softopper are different from the video!!! Your video says align the rails flush with the inside wall of the truck bed while the paper instructions say to align it with the front side. The picture clearly shows the thing being aligned to the outside? Which is it???
Not to be a trouble, but I noticed the same thing, I also noticed a bit of water got in the first day I set it up, due to the fact that it's too far back. I additionally noticed that it's not 1/2" from the inside bed closer to the cab. I will have to adjust my next day off, the good thing is, it can be adjusted!
Any avalanche owner who didn't have side rails to start off? Can you explain where the track lays on the Avalanche as we have those side compartments that flip up?
Great! Can it withstand a car wash?
Does anyone forego the clamps and just drill a few holes through the rail and bolt it to the bed rail? I never cared for those kinds of clamps, they make me nervous?
Nothing wrong with that I suppose. Just make sure everything is lined up before drilling
I cant get my buttons to align
Can you add side windows?
Is there any way to protect it from being stolen?
its not worth stealing
old comment, but I just got mine. A tailgate can be stolen in 10 seconds with no tools. Put a hose clamp around one of the mounts and it's now a 2 minute 1 tool job.
To take just the topper, you'd have to unsnap the snaps and pull the pins at the pivot. Zero tools. To steal the rails they'd need a wrench for the clamps. So I think if you secured the pins and the clamps (maybe replace the hex bolts with something more obscure) you could slow someone down and reduce risk.
Move to a more rural area away from the city 👏🏻
There needs to be a 1st gen Honda Ridgeline specific video , because it's totally different and the provided instructions aren't very good .
Is there a video for the 2nd gen Blazer and Jimmy?
Install is the same as on the truck, but with a few extra steps for header bar and door surrounds. We do have the install instructions on our website.
Do you have a video for a Chevy avalanche specifically
I just inquired myself. I don't know where the track suppose to sit...
Excellent video (and the chick is cute, too).
Dickhead
Bofum.
Do you have one with clear sides or clear windows?
Hi Pierre! We do offer all of our tops with clear windows. However, we don't offer any of our truck tops with side windows. The vinyl that is used for the windows can be vulnerable in the cold, and those side panels are sewn into the top and not easily replaced. The front and the rear windows for trucks are easily removed and inexpensive to replace. Our SUV tops do come with side windows, and that is only because those vehicles have the Softopper over the passenger compartment as well. Please let me know if you have any other questions.
No way the chick with the bob is snapping mine on. Been at it for 6 hours…might go buy a hard top and buck this in the trash
Did you ever get yours to snap?
I saw online repeatedly to heat the fabric in the sun for a few hours. I didn't do it either. I was losing it for a while.
What the hell is a TAC74 model?
Please what is it?
Some model of Toyota Tacoma.
So basically, don’t put anything in here that you wouldn’t leave in an open truck bed. Got it.
Picture is fake....my softopper is almost 3 inches lower than roofline.🤓
Bestop is a better design.
That last snap though, my lord. Turned out awesome though.
Snap the 4 corners first. Easy. Then snap the others 👍