How to Ink Transfer to Wood-Fast and Easy!

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 257

  • @Mark-h6k1w
    @Mark-h6k1w ปีที่แล้ว +15

    Thank you! The method you suggested worked great in helping to create a fun Christmas present! I used glue stick to paste curled up freezer paper(with the waxy side up of course) flat onto a piece of printer paper before sending it through the inkjet printer. This made it not only much easier to print but also to handle after printing (paper stayed attached after printing -- no need to separate). Also beforehand it also helps to pre-print the design onto the regular sheet of printer paper that you are going to attach your freezer paper onto (and then you know exactly where to gluestick the freezer paper onto so that it completely covers up the design). In other words you no longer need to precisely cut a 8.5 x 11 piece of wax paper to feed through your printer. You use only the rough size needed to gluestick the wax paper over the design area on your printer paper and then of course send it back through your inkjet printer so it prints on the shiny side of the freezer paper) and follow the method suggested in the video to transfer it to wood. Hope that helps somebody.

  • @ralphtrites3724
    @ralphtrites3724 ปีที่แล้ว +6

    Excellent demonstration. Burnishing is the art term and the back of a large spoon works well for this, too. I need to find some glossy paper! Thanks for inviting your daughter to join in.

  • @woodandwheelz
    @woodandwheelz ปีที่แล้ว +28

    I've been doing this for years and I wanted to share that, yes, you can use this method on a piece of wood that has been painted. I've done it over chalk paint and flat white. It does have to be a flat paint. And, if you dilute white matte (flat) paint with some water, it acts like chalk paint. And it's a whole lot cheaper.

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +3

      Great tips! Thanks!

    • @HeatherValentineMsFoodie
      @HeatherValentineMsFoodie 8 หลายเดือนก่อน +1

      That would be a paint wash ❤

    • @woodandwheelz
      @woodandwheelz 8 หลายเดือนก่อน +1

      @@HeatherValentineMsFoodie Yes, of course it would. I was trying to be very specific in the use of Flat or Matte (however it's labeled) paint and the process, rather than just saying paint wash. Not everyone is an expert on the process. Many people come here to learn. Thank you and God bless.

    • @Captain_Clark_CDoryAdventures
      @Captain_Clark_CDoryAdventures 8 หลายเดือนก่อน +2

      Hi there. I just wanted to thank you personally. Not only have you known about this method for years, but you still decided to confirm it works once a video was made by someone else on YT. We would all like to thank you for your expertise. We all come here to learn and for that, you are just the best at what you do and for giving back to the community. Also your choice of words whilst describing what a paint wash is was second to none. Thanks for your insight. May God bless you always and I can't wait to try this! Best day ever. ❤

    • @sirha87tech
      @sirha87tech 6 หลายเดือนก่อน

      I'm definitely gonna try this and post the results. Thanks

  • @franciscorodriguez9714
    @franciscorodriguez9714 ปีที่แล้ว +8

    You're a lifesaver!! I took on a crafts project that was beyond my actual artistic skill. But with this, I can get it done and probably better than I thought. Thank you.

  • @tomstuart2652
    @tomstuart2652 ปีที่แล้ว +6

    WoW! So quick and your explanation was so clear. Particularly about using spray. I would usually use a wipe-on matte polyurethane but now I know to buy a spray can. This is perfect timing for Christmas gifts and decorations. Thank you.

  • @jamesdeblois878
    @jamesdeblois878 10 หลายเดือนก่อน +1

    That was great can not believe how easy. This will make my wood projects so much better . Thanks for making this video !!!!

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน

      Thanks for watching! So glad it was helpful :)

  • @lawrencejohnson3259
    @lawrencejohnson3259 9 หลายเดือนก่อน +1

    Wow! Pretty neat. I can’t wait to try this! Thank you for posting this.

  • @dutch1589
    @dutch1589 ปีที่แล้ว +2

    This is great, I am a graphics professional and business owner that has all the equipment to do this commercially but it's really cool to see how others, without the advantages I have, can make this work anyways. So much fun to watch.

  • @anthonym.pacelli1960
    @anthonym.pacelli1960 9 หลายเดือนก่อน +1

    To quote Mr Spock "Fascinating ". Really neat trick, thanks 👍

  • @MontysHall
    @MontysHall 9 หลายเดือนก่อน

    Can you send me a little more about what type of label paper, and how the correct orientation for HP printers. The link in your description takes me to a 2-in-1 sheets for postal labels. I really want to add personalized notes onto small projects I am building for friends and neighbors.

  • @Devil-Made
    @Devil-Made 4 หลายเดือนก่อน +1

    This is a game changer for me. Thank you!

  • @rickbrown24
    @rickbrown24 8 หลายเดือนก่อน +2

    Wow! That’s pretty cool! Thanks!!!!

  • @tomrudd530
    @tomrudd530 2 ปีที่แล้ว +3

    Ive done this a few times with freezer paper, put the ink on the slick side just like youve done it and yes it will smear if touched

  • @huniprazsamari765
    @huniprazsamari765 10 หลายเดือนก่อน +2

    Nice Idea.Thx for sharing.

  • @Mark_Provan
    @Mark_Provan ปีที่แล้ว +3

    Great video. I normally use water slides or vinyl but i will be giving this a try 🙂

  • @ScootyJP
    @ScootyJP 8 วันที่ผ่านมา

    Such a simple and cool idea. Do you know if it will fully absorb in and be food safe? Thinking of putting it on a charcuterie board before applying a food-safe oil finish.

    • @WendellWoodworks
      @WendellWoodworks  5 วันที่ผ่านมา

      I would think so! Especially with the oil over it :)

  • @Cotton2Ennis
    @Cotton2Ennis 11 หลายเดือนก่อน

    So cool, I work with wood and saw this and said to myself I need to know this, thanks for posting.

  • @NelsonRodriguez-y4x
    @NelsonRodriguez-y4x ปีที่แล้ว +1

    WOW this is impressive! This is exactly what I was looking for my project. And so easy! Thank you very much for sharing!

  • @leedsbutler3567
    @leedsbutler3567 10 หลายเดือนก่อน

    Wow! Thank you! W as thinking to spend thousands on a laser engraver, but I think this will work for my needs! Thank you!!!

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน

      Thanks for watching! It’s definitely worth a try! 😊. Best of luck!

  • @MisterDivineAdVenture
    @MisterDivineAdVenture 10 หลายเดือนก่อน

    WOW I can't believe it!! - just like that! That's pretty amazing!!

  • @westonfutures
    @westonfutures ปีที่แล้ว

    I would love to see a video on the one project I saw.
    “The mountains are calling us”.
    Looks amazing. Thanks in advance

  • @staceyengstrom2012
    @staceyengstrom2012 23 วันที่ผ่านมา

    so the must have is a ink jet printer...like a specific brand you suggest?

    • @WendellWoodworks
      @WendellWoodworks  17 วันที่ผ่านมา

      I’ve used canon and HP and like them both :)

  • @garyreneker6226
    @garyreneker6226 11 หลายเดือนก่อน

    Thanks for the info. A hundred projects just came to my mind. Oh, by the way, your daughter is adorable.

    • @WendellWoodworks
      @WendellWoodworks  11 หลายเดือนก่อน

      Thanks, Gary! Happy creating!

  • @dinaaamin
    @dinaaamin หลายเดือนก่อน

    Hi thanks for the tutorial! How long do you leave it on the wood? do I need to leave it overnight or just a bit of pressure and it should be done?

    • @WendellWoodworks
      @WendellWoodworks  หลายเดือนก่อน

      Thanks for watching! It’s pretty instantaneous this way with pressure :)

  • @Parcsyde
    @Parcsyde 11 หลายเดือนก่อน

    Awesome Job! I'll be sure to try this with my Laser Crafting work, thanks for sharing!

  • @markhexamer
    @markhexamer 10 หลายเดือนก่อน

    Hello, from what I watched you used nothing on the wood before you applied the transfer? You used an inkjet and the wax paper from the label paper?

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน +1

      That’s all I used! :)

    • @markhexamer
      @markhexamer 10 หลายเดือนก่อน

      @@WendellWoodworks I've watched a few videos with everyone using different chemicals..I guess it's all about the wax ..thank you

  • @tanyasanders1687
    @tanyasanders1687 ปีที่แล้ว +1

    Does this have to be done fresh off the printer? Or can some time pass before transferring?

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      Hmm, I haven’t tried to wait any lengthy time, but I’m guessing it would need to be fairly fresh. I’m not sure the ink would stay overnight. I imagine it would work within an hour though? You’ll have to let me know! ;)

  • @SeekingHisWill77
    @SeekingHisWill77 ปีที่แล้ว

    This is awesome and your daughter is adorable!

  • @jean-michelargentin5465
    @jean-michelargentin5465 7 หลายเดือนก่อน

    That was very informative.Im working on a project that requires for me to put a logo on the back of bench wood.
    Dose it dry permanently after you done?

    • @WendellWoodworks
      @WendellWoodworks  7 หลายเดือนก่อน

      Yup. As long as you seal it! :)

  • @michaelthea27
    @michaelthea27 2 หลายเดือนก่อน

    What kind of paper is it?

  • @jorreacts8902
    @jorreacts8902 5 หลายเดือนก่อน

    If i was to put a design on would it stay if i spray varnish over it or would it still come off?

  • @TyRedmon-pp8kx
    @TyRedmon-pp8kx 7 หลายเดือนก่อน

    If it were to get wet would it smear after the project is finished?

    • @WendellWoodworks
      @WendellWoodworks  7 หลายเดือนก่อน

      I’ve never had it smear and don’t think it ever would with a top coat :)

  • @Baltihunter
    @Baltihunter 8 หลายเดือนก่อน

    Wow. I’m impressed 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿🇬🇧

  • @jennsnaps
    @jennsnaps ปีที่แล้ว

    quick question - if i wanted to do this on wood that i needed to finish with food safe butcher block oil would the image smudge? Or if I waited a couple days after transferring would the ink be completely dry so I could buff in/out oil over it? Thank you!

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      Hi, Jenn! I actually don’t have a problem with the ink smearing after it dries. In a few instances I used a sharpie to fill in some gaps and that DOES smear so don’t do what I did 😉.

    • @jennsnaps
      @jennsnaps ปีที่แล้ว

      ohemgee - this is sooo amazing. You've changed my life with this tip. I tried it last night on a logo I made in canva for a custom board and it's absolutely perfect. I went through burn stamps and burn stencils (which both felt flat) and this was exactly what I needed. Fully customizable designs that won't cost me mega money - I am beyond stoked. Thank you so much for sharing your knowledge and your process! @@WendellWoodworks

  • @MrBritrider
    @MrBritrider 11 หลายเดือนก่อน

    So let me get this straight, the paper you print on is the backing paper of a sheet of self stick labels right?

    • @WendellWoodworks
      @WendellWoodworks  11 หลายเดือนก่อน

      Yes 🙂

    • @MontysHall
      @MontysHall 9 หลายเดือนก่อน

      So, you remove the label paper first and then run the backing sheet through the printer.

  • @Tanacarroll
    @Tanacarroll 10 หลายเดือนก่อน

    Your little daughter is beautiful! ❤😊

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน

      Thanks you! She’s grown so much since then! Still a beauty 😊

  • @HeatherValentineMsFoodie
    @HeatherValentineMsFoodie 8 หลายเดือนก่อน

    Any kind of untreated wood?? What did you use? ❤❤❤❤ THANK YOU

    • @WendellWoodworks
      @WendellWoodworks  8 หลายเดือนก่อน

      I used pine! It’ll show up best on lighter, smooth wood :)

  • @mitzi81758
    @mitzi81758 2 ปีที่แล้ว

    CAN YOU PLEASE SHARE ON HOW TO PRINT A PHOTO TO THE SIZE OF A 2" X2" CIRCLE?
    I am so new to this and I have been trying to find a program I've even went to pick art and or Cana
    And I just don't understand it. Yes I'm a grandmother and I am technology stunned! Very challenged lol!
    I've been wanting to get photos and reduce them down to a 2" circle so I can put it on slices of wood for ornaments on a tree for my all my grain kids. I don't know anybody who knows how to do this and I've been searching and researching for 2 or 3 years now yes can you believe it insane! You made this tutorial looks so easy and it's wonderful thank you for sharing and if you can help me I'd appreciate it so so very much! You have a wonderful Christmas!

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +1

      Hi, Mitzi! I’m not very techy, but I might suggest cutting the photo into a circle after it’s printed. It might be easier for you to trace and cut the size you want :). Best of luck!

    • @mitzi81758
      @mitzi81758 ปีที่แล้ว

      @@WendellWoodworks
      Thank you so much for responding...

  • @Freight_Train
    @Freight_Train ปีที่แล้ว

    Can you suggest a brand of labels that would work? I've tried 3 different ones and they all have perforated backings that don't stay as one sheet so I can't put it through the printer by itself.

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      This was the last kind I bought :) amzn.to/3GuZpRy

  • @janeypumphrey9266
    @janeypumphrey9266 2 ปีที่แล้ว +1

    What if you put this treatment to use on a charcuterie board? Do you think putting butcher board conditioner on it would be enough? Do you think it would be toxic and not be about to eat off of once transferred? Love the idea!

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      Hi, Janey! I’ve never tried, but I’d assume it to be safe as long as there was safe finish over top it :)

  • @knothead5
    @knothead5 ปีที่แล้ว

    I noticed the label sheet was by Avery. Do you have a stock number for it? I have a Staples store nearby. Thanks for the video! I think one could do a black outline and fill in with some type of paint as watercolors. Experiment to see what works best.

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      That’s a good idea! I don’t remember! This is from
      a few years back and I always seem to buy different kids. Any kind should work though! It’s just easiest with the big labels and with no perforation :).

  • @joesshop3622
    @joesshop3622 10 หลายเดือนก่อน

    Now I need to test the laser printer and see if it works. The heat melts powder as its produced but perhaps some burnishing will do nicely to transfer it.

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน

      Laser printers works differently, so you may need a different method there. Using mod podge works well with laser printers!

  • @zeejimi4044
    @zeejimi4044 10 หลายเดือนก่อน

    Wouldn‘t this method also be of interest for transferring scroll saw patterns onto wood before cutting, and thus avoiding the taping- and glueing steps that are otherwise involved ??? 🤔

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน

      That’d be great for paper sized patterns! Near impossible to pull off with multi-page patterns

  • @debbiebruce6592
    @debbiebruce6592 ปีที่แล้ว +1

    Hi. I really enjoyed this video and was excited to try it. I also had a backing sheet from shipping labels so I printed on that. My crazy printer fed the paper in super crooked but fortunately it didn't jam. The image came out way too light. I then tried it on glossy photo paper and put the setting on high quality print. The image printed great so I immediately tried to transfer it to wood. Nothing happened. The only thing I can think of is maybe I printed the image on the wrong side of the photo paper?

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +3

      Hi, Debbie! Sorry it’s been causing you trouble! Even if the ink looks light, it may still absorb into the wood well. Hmmm yes, make sure it’s printing on the glossy side! If the ink goes into the paper, it won’t go into the wood. When you print it on the glossy side, the ink won’t absorb into the paper and will be ready for wood :). Hope that helps! Good luck!

  • @carolnieves-delgado8822
    @carolnieves-delgado8822 8 หลายเดือนก่อน

    What paper the glossy paper that the sticker was on? Im confused

    • @WendellWoodworks
      @WendellWoodworks  8 หลายเดือนก่อน

      I used label sheets. Print on the glossy side after taking the labels off. I put my link the video description.

  • @giovannimicchia2400
    @giovannimicchia2400 9 หลายเดือนก่อน

    Salve ,ma sulla carta per etichette devi stampare dalla parte lucida? Perché ho provato ma l inchiostro non aderisce con inkjet,come hai fatto?

  • @staceygeise9650
    @staceygeise9650 10 หลายเดือนก่อน

    Can you tell me the font on the Gather sign behind you?

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน

      Oh goodness that was from years ago, but I would guess “playlist” on Canva :)

  • @ashokmoghe8035
    @ashokmoghe8035 ปีที่แล้ว

    Great tutorial and I will try this. Does it have to be an inkjet printer? I have a laser printer - will it work? Thanks in advance.

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      This is with an inkjet! If you have a laser printer, I would suggest looking up the mod-podge method for ink transfer :).

  • @basmedia5885
    @basmedia5885 9 หลายเดือนก่อน

    Awesome trick! Thanks!!

  • @jessicaharris9265
    @jessicaharris9265 ปีที่แล้ว

    Hello! have you tried this on wood rounds or a welcome sign that can be like for a serving tray or decoration? just trying to figure out the settings for the Canva and the printer. Thanks

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +1

      I have! I haven’t used this method since getting my Cricut, but made several serving trays this way prior to that. Worked well!

    • @jessicaharris9265
      @jessicaharris9265 ปีที่แล้ว

      @@WendellWoodworks thanks so much for your response! one more question, do you mind sharing which Cricut you have? 😊

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +1

      @@jessicaharris9265 I have the original Cricut Maker! 🙂

  • @dfrozendog3849
    @dfrozendog3849 11 หลายเดือนก่อน

    Wow, thank you. I am going to try this right away.

  • @jeaniemalone5304
    @jeaniemalone5304 ปีที่แล้ว

    Thank you for this!!! I cannot afford a cricut or the expensive supplies but want to make some things for my family. This is a much better option.☺️

  • @MartinHolmes-w8x
    @MartinHolmes-w8x 6 หลายเดือนก่อน

    Hi there. Great idea really helped me.

  • @Warrioroffaith11
    @Warrioroffaith11 3 หลายเดือนก่อน

    Could this be used on plastic to?

    • @WendellWoodworks
      @WendellWoodworks  3 หลายเดือนก่อน

      @@Warrioroffaith11 no, I don’t believe so. Wood is a porous material that absorbs the ink.

  • @larauka3984
    @larauka3984 ปีที่แล้ว +1

    can you tell me how to do this?

  • @carolnieves-delgado8822
    @carolnieves-delgado8822 8 หลายเดือนก่อน

    What paper did you use😢

  • @jeffwilliams8031
    @jeffwilliams8031 10 หลายเดือนก่อน

    can you use the website you printed the unicorn from to make your on designs or do you have to use the pictures they have on that site?

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน

      Canva! Yes, it’s great for making your own designs :)

  • @wgplayingthrough7520
    @wgplayingthrough7520 ปีที่แล้ว

    Great video! Thank you! I have a question...Can I make the transfer using ink jet printer?

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +1

      Yes! This actually only works with inkjet. If you have a laser printer, you can look up how to ink transfer with mod Podge :).

    • @wgplayingthrough7520
      @wgplayingthrough7520 ปีที่แล้ว

      @@WendellWoodworks Thank you so much!

  • @stacystarnes2147
    @stacystarnes2147 11 หลายเดือนก่อน

    How did you get the image to print reversed?

    • @WendellWoodworks
      @WendellWoodworks  11 หลายเดือนก่อน

      Hi! It depends what program you’re using. There’s an option on paint to flip the image horizontal. You can also use canva.com to flip images. Best of luck!

  • @John-uz3ho
    @John-uz3ho ปีที่แล้ว

    Your assistant is adorable ...

  • @NCCaliGirl23
    @NCCaliGirl23 11 หลายเดือนก่อน

    If you put on a cutting board, what should you seal it with?

    • @WendellWoodworks
      @WendellWoodworks  11 หลายเดือนก่อน

      Hi! I’d recommend Walrus Oil :)

  • @jeangrandy8672
    @jeangrandy8672 ปีที่แล้ว

    What is the paint program you said we can use? I can’t find it, thanks

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +1

      Hi, Jean! Paint automatically comes on all Microsoft/Windows. If you have a Mac, you’ll have something a little different called Paintbrush I think? Goodluck!

    • @jeangrandy8672
      @jeangrandy8672 ปีที่แล้ว

      @@WendellWoodworks Thank you so much!

    • @jeangrandy8672
      @jeangrandy8672 ปีที่แล้ว

      @@WendellWoodworks can you type words into this program or just pictures? I’m on it right now and it won’t let me type anything! Thank you

  • @JohnMildenberger-d4d
    @JohnMildenberger-d4d 10 หลายเดือนก่อน

    Inkjet or laser? Does it work with both?

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน

      Inkjet! Sorry I didn’t specify. If you have a laser printer, it’s best to use mod podge. You can search the mod podge method to learn how :).

  • @3588only
    @3588only ปีที่แล้ว

    Wow, that is cool how easy a kid that age can do it too, nice and thanks.

  • @pauloconnor6331
    @pauloconnor6331 ปีที่แล้ว +1

    Thanks for sharing a great tip!

  • @Littlesharky-h2s
    @Littlesharky-h2s ปีที่แล้ว

    Sorry I just saw this. Love your daughter’s way of pressing it down (with her balled fist)🤣😂. Will this work the same way with black and white photos? Thanks

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      Thanks for watching! If you have an actual photograph no, but yes if you print it with an inkjet :)

  • @KellyPKramer
    @KellyPKramer ปีที่แล้ว

    Looks good.
    Do you finish the wood first so the ink doesn't bleed into the wood?

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +1

      Hi, Kelly! Thanks for watching! No, I just give it a sanding beforehand and I actually haven’t really had a problem with bleed. The smoother the surface the better though. Some finishes will bleed the ink after the fact though if you brush it on, so I like to use a spray finish afterward :)

  • @kimberlypanek-bf9si
    @kimberlypanek-bf9si ปีที่แล้ว

    Hi! Im sorry this is a late comment but I tried this method and the ink comes out so light… any thoughts? The wood is untreated and I’m using an HP inkjet. Thanks!

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      Hi, Kimberly! Sorry it didn’t work well for you. It might be the type of wood you’re using? I’m guessing it might not work as well on hard wood that’s not as porous? I heard once that lightly dampening the wood helps too, and making sure that all the ink gets rubbed off the transfer paper. I actually haven’t done this for quite awhile so I haven’t acquired any new tips! Hope you have better luck!

  • @jaybrunn1175
    @jaybrunn1175 2 ปีที่แล้ว +1

    Great tutorial, and your helper was very entertaining! 🤗

  • @richmondscribe
    @richmondscribe ปีที่แล้ว

    Just in time for Christmas!!! Thanks!

  • @PrincessSicada
    @PrincessSicada ปีที่แล้ว

    Thank you!!! Do you have just save me so much time and money because I do not have to go back to the crafting store as I thought I did. Thank you❤

  • @vell0cet517
    @vell0cet517 ปีที่แล้ว +2

    The unicorn was an excellent choice...

  • @melissabrant748
    @melissabrant748 2 ปีที่แล้ว

    Can you use wax paper for the image transfer?

    • @WendellWoodworks
      @WendellWoodworks  2 ปีที่แล้ว

      Hmm quite possibly! Try it out and let me know! :)

  • @John-lg9sb
    @John-lg9sb 2 ปีที่แล้ว

    Great video. I am using this technique for my wood burning. Thanks

    • @WendellWoodworks
      @WendellWoodworks  2 ปีที่แล้ว

      That’s a great idea! Thanks for watching!

    • @jeanjacobson8911
      @jeanjacobson8911 ปีที่แล้ว

      Do you mind if ask how applying to our woodburning projects?

  • @jcarlin596
    @jcarlin596 10 หลายเดือนก่อน

    What a great idea. Thanks

    • @WendellWoodworks
      @WendellWoodworks  10 หลายเดือนก่อน

      Thanks, Jim! Appreciate the watch.

  • @cammanderclone1
    @cammanderclone1 2 ปีที่แล้ว

    Will you still be able to apply this on wood that has a wood stain on it already ?

    • @WendellWoodworks
      @WendellWoodworks  2 ปีที่แล้ว

      That’s a good question! I’ve always applied stain afterward, but I would think that as long as it wasn’t sealed, it would still take :).

  • @johnaustin1825
    @johnaustin1825 ปีที่แล้ว

    Can I transfer onto COLOURED WOOD? Eg BLACK

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      I think the wood would need to be free of any varnish or paint to work

  • @georginaledlie7444
    @georginaledlie7444 10 หลายเดือนก่อน

    Wow. This is amazing. Thank you so much.

  • @allisterpenson8386
    @allisterpenson8386 ปีที่แล้ว

    Hi this looks amazing can I ask what kind of printer did you use please 🙏

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      I’m not sure what I used in this video, but I have an HP now

  • @jenniferdavis2708
    @jenniferdavis2708 ปีที่แล้ว

    So can I transfer to canvas instead of wood the same way?

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +2

      Hmm I’ve never tried, but am not sure it would soak into canvas the same way it does wood.

  • @WonkyPapa
    @WonkyPapa 8 หลายเดือนก่อน

    Very cool. Thank you.

  • @darcis1916
    @darcis1916 ปีที่แล้ว

    When I try this I get vertical lines on my glossy side where the feeder wheels hit. Any suggestions?

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      Bummer! Sounds like your printer needs cleaned…you’ll have to look up how to do that for your specific printer!

    • @darcis1916
      @darcis1916 ปีที่แล้ว

      I have to keep it as letter and best print. If I try to do glossy setting I get the lines. But letter setting is fine. 🤷

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      @@darcis1916 good to know. Glad you figured it out!

  • @yusufbatumlu2321
    @yusufbatumlu2321 2 ปีที่แล้ว

    Hi,,
    its great video
    what is transfer paper brand

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      Sorry for the delay response. I don’t remember what brand I used here, but I was using label sheets…any should work :)

  • @westonfutures
    @westonfutures ปีที่แล้ว

    What type of paper is that?
    Can I get it on Amazon??

  • @timlist4173
    @timlist4173 ปีที่แล้ว

    What a wonderful tip. Thanks.

  • @juanmarendon2016
    @juanmarendon2016 ปีที่แล้ว +1

    Thanks for sharing. Really helpful.

  • @emilypettey8775
    @emilypettey8775 2 ปีที่แล้ว

    Does this work if you lightly stain the wood first?

    • @WendellWoodworks
      @WendellWoodworks  2 ปีที่แล้ว

      I think it would as long as it wasn’t a polyurethane or gel stain. I always stain afterward and haven’t had any trouble with smearing-again, as long as it’s not a gel stain or poly :).

  • @hopebernadaz5213
    @hopebernadaz5213 3 ปีที่แล้ว +1

    Thank you so much! This is very helpful ❤️❤️❤️

  • @nelsontheodore3464
    @nelsontheodore3464 8 หลายเดือนก่อน

    Amazing! Thank you.

  • @libborr
    @libborr ปีที่แล้ว +1

    But i can't put the sticky paper to my printer. It always stuck inside

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      Hmm it shouldn’t be sticky, just glossy. Maybe it’s a printer setting? Good luck!

    • @libborr
      @libborr ปีที่แล้ว

      @@WendellWoodworks I'm confused now because i don't know which side should i insert the paper into the printer

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว +1

      @@libborr Are you using label paper? If so, take the sticker off. Then you’ll want the ink to go on the glossy surface underneath the labels.

    • @libborr
      @libborr ปีที่แล้ว

      @@WendellWoodworks Ah ok, thanks a lot 🙏

    • @jeanjacobson8911
      @jeanjacobson8911 ปีที่แล้ว

      I'm seeing this 2 yrs later. Good share thank you

  • @Linda-hd9zx
    @Linda-hd9zx ปีที่แล้ว +1

    I love this. Thank you for the great video.

  • @jerodjerod
    @jerodjerod 11 หลายเดือนก่อน

    Thanks for the video! Great tips!

  • @supersmartguy
    @supersmartguy 2 ปีที่แล้ว

    Does this work if you have a laser printer?

    • @WendellWoodworks
      @WendellWoodworks  2 ปีที่แล้ว +1

      Hi, Luan! I’ve never tried, but I would think so…You can also look up how to use the mod podge method. I know that works with laser printers too :). Thanks for watching!

    • @johnyules9293
      @johnyules9293 ปีที่แล้ว

      I’d suggest using a clothes iron on the back of the paper to remelt the toner onto the wood. Experiment with different temperature settings, but no steam. You may be able to use ordinary printer paper for the transfer, since you actually want the toner to form the best possible image. (In a laser printer, you’re not shooting ink droplets onto paper. Instead, very tiny toner particles are deposited on the paper, and then “ironed” in place.) I’m sure there are videos available that describe this method; there may even be special transfer materials available. Electronics hobbyists have been ironing laser-printed images onto blank printed circuit boards for years. The toner forms a protective resist in areas where the copper must remain when the board is placed in a bath that etches away the unprotected areas of copper.

  • @dianeratcliffe1363
    @dianeratcliffe1363 6 หลายเดือนก่อน

    Is that a laser or inject printer please

  • @gezilingovlogs3700
    @gezilingovlogs3700 2 ปีที่แล้ว

    Hi! What printer are you using and would you recommend it?

    • @WendellWoodworks
      @WendellWoodworks  2 ปีที่แล้ว +2

      Hi! I’m no printer expert, but I have an HP and a cannon. The HP might be a bit sharper quality, but the ink is amazingly cheap on my Cannon which I really appreciate. It just depends what you need it for I’d guess :). Thanks for watching!

  • @georgewettig1860
    @georgewettig1860 4 หลายเดือนก่อน

    very creative!

  • @wendellfishing
    @wendellfishing 3 ปีที่แล้ว +5

    Love this. Easy and fun tutorial.

  • @johnaustin1825
    @johnaustin1825 ปีที่แล้ว +1

    Thanks

  • @andreagarofolo9431
    @andreagarofolo9431 ปีที่แล้ว

    Will laser paper work

    • @WendellWoodworks
      @WendellWoodworks  ปีที่แล้ว

      Hmm I’ve never tried! If it’s glossy enough? It can’t absorb the ink. You’ll have to let me know :).

  • @arturosegundo100
    @arturosegundo100 2 ปีที่แล้ว

    Great video where can i find the label sheets

    • @WendellWoodworks
      @WendellWoodworks  2 ปีที่แล้ว +1

      Thanks for watching! You can find label sheets at Walmart, any print stores, or on Amazon :).

    • @arturosegundo100
      @arturosegundo100 2 ปีที่แล้ว

      @@WendellWoodworks thanks