Acer Nitro 5 2021 AN515-57 Screen/Display Replacement
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2025
- In this video im showing you have to replace the display on a Acer Nitro 5 2021 model number AN515-57
================================================
================================================
Tools that i use frequently that are Ali-express Affiliate linked
CPB Heat pad: s.click.aliexp...
This is the Blue Pad i always have on my videos usually set at 60 Oc
I use this to soften adhesive on mobile devices.
B7000 Frame Adhesvie: s.click.aliexp...
my go to glue for almost everything now days!
Thin Metal Pry Tool: s.click.aliexp...
Used to open ipad and remove glued back covers on phones
Heat Resistant Tape: s.click.aliexpr...
When using the heat gun near sensitive parts, its best to cover them
With this to protect them
Double Sided Black Tape: s.click.aliexpr...
The usual tape i use on most repairs, on screens
Red Clear Tape: s.click.aliexpr...
For things that need more Stick!,usually on tablet digitizers
Phone Repair Tool Kit: s.click.aliexpr...
A Similar tool kit to mine, that i use for those random screws that you dont normally see
Hakko FX 951 Clone Station: s.click.aliexp...
My Soldering Station i use, so far it has been good
Quick 861DW Hot Air Station: s.click.aliexp...
This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase
Power Z USB Amp Tester: s.click.aliexp...
Advanced readouts of power draw on devices
Basic USB Amp Tester: s.click.aliexp...
A Simple Amp tester to see if your charger is actually putting out power
Black Tweezers Set: s.click.aliexp...
The Black Tweezers i use in my videos
Large Metal Pry Tool: s.click.aliexpr...
This is the same as the metal pry tool i use, different brand printed on it
Pry Tool: s.click.aliexpr...
A New Version of the pry tools
Basic Digital Microscope: s.click.aliexp...
This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed
Orico 120w 10 Port Charging Station: s.click.aliexpr...
The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job
One page i go to when I'm curious what new repair tools are out is:
Wozniak Store: s.click.aliexpr...
Legend, Thank you so much! Instead of paying soo much for the service, i repaired my own laptop screen and saved soo much money
Great job !
Just wanted to tell you thank you for this tutorial. Just replaced one for this same model. It’s up and running.
Glad it helped
Bro, I just want to say you are a goat I bought the screen, not knowing how to replace it search how to replace it your video is the first one that popped up and you saved my life bro thank you
Glad I could help, good job with your repair!
Thank you so much
Never thought it was going to spend nearly $200 getting fixed at Best buy
Glad I could help
Thank you replacing one of my friend's son's laptop and was wondering how it was stuck lol Thank you sir!!!!
Cheers, good job replacing the screen!
Worked perfect, thank you.
Excellent
Thanks for the video, I wanted a screen replacement and I was asked for the numbers of pin on it , dumb me counted the pins with my screw driver without removing the battery so I guess it has short circuited please what can I do, it is not charging nor powering on .
Thanks
Currently replacing mine. There was a pull tab on the top corners for the tape, the same as the bottom.
cheers, good spot
Can you do a vid about how to change that screen cable pls
No sorry
Can you tell the hinges of these laptop how it is nice… i have the same laptop and little be worried about it… a very little sound produce some time when i close my laptop ….. is this a damaged or due to the plastic built?
Scusami buonasera potrei sostituire il Display del mio Acer NITRO 5 AN517-51 - 17,3 pollici con un Display Touchscreen?
Please help me sir I need a new screen but I can't afford to by the exact model it is an515-57-536Q will any screen work or am I out of luck? 😔
Hi i just watch this video
I just want to ask is it posible to posible to replace my monitor with other type of monitor like i have acer nitro 515-52 and i want to get the screen of 515-57 which is higher refresh rate i dont know if its compatible?
is this the rtx 3050, I5-1140H variant?
Thanks mate, hope i don't screw this up
Good luck
@@rickstechrepairs mine is AN515-55, only AN515-51 available at the moment can i use this instead?
My computer was turning on but then stopped after I changed it. Do you know why by any chance?
there is also pull tabs at the top corners too, it didnt snap, you just missed the top ones 😅
Where you get this screen from? It is 144hz? And how much if you can tell me. Thanks great work!
purchased from aliexpress
What's the price of the display acer nitro 5 u put on the vedio and why u changed because of physical damage or itself get flickered??
replaced due to physical damage
Hello Ricks Tech Repairs! I have the AN515-55-50J3 version of Acer Nitro 5 and the LCD is flickering. I have the B156HAN13.0 120Hz eDP1.4 but the shop sent me N156HRA-EA1 144Hz eDp1.3. Will it work? Both has 40 pins. The main difference is the Hz and the eDP. I don't need the higher Hz to be honest. I just want to replace the screen.
I think you should be OK
@@rickstechrepairs Thank you very much!👍
Fo you have the info for the higher refresh rate?
How many pins does the screen have for when you plug in the other one is it 30 or 40 pins?
i cant remember sorry
shoul i take the battery out first or will the computer being turned off be fine?
did u take the battery out or no
Hello, I have a laptop like this and a couple of months ago dead pixels appeared on the screen, since it has a warranty it went to an authorized service center for repair, when I got the laptop back I noticed that it was not placed correctly and was noticeably bent to one side. I am wondering if it is possible to properly adjust the screen as it was when I bought it or will it never be able to be installed properly again? Should I send the laptop in for service again? Thank you in advance !
@rickstechrepairs
Is there any way to just remove the entire display so that you can just connect it to a monitor?
did it work?
@@JetsFuture I can't seem to get it off. And forcing it only seems to have made the screen darkening problem I have worse.
@@PouchMaster what I did was disconnect the actual screen, keep the top half cover since the wifi attennas are connected and keep it closed. Works like a mini pc
and my second question i buy this laptop first then i see screen bleeding and exchange laptop but change laptop but my second laptop again show screen bleeding what to do again exchange because my laptop warranty is available.
I'm not sure what you mean
But if you have a new laptop with a screen issue, get in contact with your seller for warranty
Hello, do you have the reference for the double sided tape?
nar but pretty much any double sided tape would be fine
Question do you have to get the exact screen size of your model or no because my model is an515-58-5046
Dont have the modelon hand
I just replaced my screen but it won’t turn on. I don’t know what to do it keeps flashing the charge light and display but won’t turn on or run
was the laptop completely shut off when you swapped the screen ?
try and disconnect the battery and run using the power pack and see what happens there
@@rickstechrepairs Okay i just did that and it doesn’t work and it was off before installing the screen
How much does it cost?
Do you need to add double sided tape again
Can't hurt
Can you order the same model number screen and it will still work??
it should yes
Hey there! I replaced my lcd and it worked fine until we restarted it
It wont turn on, got any fixes?
not sure sorry, does hdmi video out still work?
@@rickstechrepairs
Some more problems:
Charging light just functioned today
But the other one lights up then goes dark
Whole laptop won't turn on still
My laptop came with a 60hz panel. Can i upgrade it with 144 hz ?
if it's a nitro 5 I would say yes
Is it same to AN515-58 screen? My screen is broken
yah, should be close
Hlw sir please reply my laptop screen move downward while using it then I open display while power is on and even video adopter plastic glue not sticking so I put that plastic on right position and use another tape but doesn't pull out video adopter and then my laptop not booting up does that mean my motherboard is damage????
try and run the laptop with the screen disconnected and the HDMI Cable connected to a screen/tv and see if you get a picture there
@@rickstechrepairs no sir doesn't show any sign of boot up
I meant do you know where to get the tape what kind
Got it online but a hardware store should have something that would be fine
so do i detatch the battery too
if you can, yes would be worth doing
Yeah, mine dont have little pull tabs.
that makes it much more of a challenge
what a change oled display and what cost in change oled
I don't know if OLED panels are purchasable
please tell what to do?
Check out the video
What is the cost of the screen? For nitro 5 full hd, 144hz
depends where you buy it from
I got mine from eBay
Same I want to know the cost I live in india
@@MohdSaif-qf6io did you get dead pixels as well suddenly???
@@brandonp8634 my half display is gone but it's working in 60hz but if I put in 144hz the display is not working
my laptop acer nitro 5 an515-57
?? If it's a screen replacement , then the video has all the info
My screen not working it the acer won’t turn on
Try and connect it to a screen via HDMI and see if you get any video there
@@rickstechrepairs it wasn’t charging
@@rickstechrepairs the charger light didn’t come in
Same issue here, were you able to fix it?
@@rickstechrepairs hey bud, i have the same issue, my laptop seems to have completely bricked, i didn't remove the battery during screen replacement. I did shut down my laptop though. Let me know if you have any idea why.
Can u link the screen link?
purchased from a local seller
@@rickstechrepairs roughly how much for the screen?