Hi, i want to know. Does old laptop with 60hz monitor can be replaced with another monitor with more hz (ex.120hz)? Of course with the same size and pin number connector.
It should not lay on it's own! You need to put display with the gap or 3-5mm over the bezel. Otherwise your screen will be too low and the bezel will be over your display on the bottom.
AY, if yall have a newer iteration of the nitro 5 , when you are unplugging the screen, look for a sort of latch that keeps it from unplugging. I used a very small hook to pop it up before unplugging.
there are 2 screws for the top so wouldn't it be better, if only using 2 pieces of tape, to place the taps at the bottom where nothing but the trim hold the display in place...or does it really matter?
Where to get red adhesive double sided tape ? - amzn.to/2P4loIa Where to get LCD screen replacement LM156LF2F 03 ? From Amazon: - amzn.to/39gyDfK - amzn.to/3w3rhpz - amzn.to/3db6WWH - amzn.to/3tQdtNg From Ebay: - ebay.to/31kqimG - ebay.to/3rqzDUJ - ebay.to/3rrU2sn - ebay.to/3svODlt Tools Kit Screwdrivers: - amzn.to/3kriJ65 Or - amzn.to/2PBo38L
After replacing my screen which is the same model as my laptop, my laptop won’t turn on and it’s charging and everything, I also did change the screen to old one again, same thing. Any help?
Plugin external screen to laptop see if it shows anything. Replacing a screen should not damage your laptop. Unless you are changing it while it was on?
I have a huge problem!! I was replacing the screen following exact the same steps. After change the screen I tried to turn it on and is not working!!! Not power on the laptop at all!
Wirklich sehr sehr gut erklärt in dem Video. Mein Display funktioniert nun nach dem Wechsel wieder einwandfrei.
Really helpful video. Thank you. I’m wondering why you didn’t put tape on the bottom of the screen as well?
I did not for mine
Good video fixed my conundrum of the tape
You are welcome
Can you pleasse do a video on edp cable replacement specifically the nitro 5 that originally runs a 30 pin 60hz to a 40 pin 144hz screen? If possible?
Will it help screen bleed if I loosen screws a little bit the screen bleed is on the bottom or is it just plastic bazzel holding
Hi, i want to know. Does old laptop with 60hz monitor can be replaced with another monitor with more hz (ex.120hz)? Of course with the same size and pin number connector.
Can't upgrade to 120hz. Has to be the same as original refresh rate.
good and clear video
Thank you
Are all the links you provided all have 40 pin connectors for each the screens cause that’s what I have
My link is the LCD screen model for my laptop. Please match yours before purchase
Where are the links?
good work mann...
You are welcome. Glad the video helped.
It should not lay on it's own! You need to put display with the gap or 3-5mm over the bezel. Otherwise your screen will be too low and the bezel will be over your display on the bottom.
AY, if yall have a newer iteration of the nitro 5 , when you are unplugging the screen, look for a sort of latch that keeps it from unplugging. I used a very small hook to pop it up before unplugging.
there are 2 screws for the top so wouldn't it be better, if only using 2 pieces of tape, to place the taps at the bottom where nothing but the trim hold the display in place...or does it really matter?
The two screws on top are for the hinge to hold top plastic cover. They do not hold the lcd screen
What happen if you don't turn off while changing Display will this damage motherboard ???
do i need to wear anti static wristband/bracelet? i dont have one what if i dont is there going to be issue?
also what if i bought a standard screen with only 1366x768 resolution is it going to work?
Where can I find the links to the tools and screen he mentioned In his video?
Where to get red adhesive double sided tape ?
- amzn.to/2P4loIa
Where to get LCD screen replacement LM156LF2F 03 ?
From Amazon:
- amzn.to/39gyDfK
- amzn.to/3w3rhpz
- amzn.to/3db6WWH
- amzn.to/3tQdtNg
From Ebay:
- ebay.to/31kqimG
- ebay.to/3rqzDUJ
- ebay.to/3rrU2sn
- ebay.to/3svODlt
Tools Kit Screwdrivers:
- amzn.to/3kriJ65
Or
- amzn.to/2PBo38L
@@UbergeeksBiz no the little screwdriver
Have the serial of 17" screen please?
After replacing my screen which is the same model as my laptop, my laptop won’t turn on and it’s charging and everything, I also did change the screen to old one again, same thing.
Any help?
Try disconnect the battery and do a direct adapter to power the laptop
@@UbergeeksBiz did it, and now my laptop is dead, no light doesn’t even charging 🥲
@@mskhot Yikes. Changing the screen should not have effect on the motherboard
Bro, you should try whit a external screen
Plugin external screen to laptop see if it shows anything. Replacing a screen should not damage your laptop. Unless you are changing it while it was on?
I have a huge problem!! I was replacing the screen following exact the same steps. After change the screen I tried to turn it on and is not working!!! Not power on the laptop at all!
Is it 30 pin or 40
40pin
@@UbergeeksBiz thanks
Laptop won’t turn on after I replaced the screen.