I thought using a foam canon was all you need to do to wash a car. Spray the foam, rinse it off, and you are done. Thank you for the education. Subbed.
Yesterday I used that ceramic detail spray on my new car. Wow! It’s incredible. I liked the results so much I used it on our 2015 Honda Odyssey and…wow! It’s like the ultimate detailer’s secret!
Thank you for all your videos...it helped me choose the proper pressure washer hose, gun and orifice for my electric pressure washer. Keep up the great work!
The blower he is using is a Toro Ultra, Model 51619. There are 2 models, both are 260MPH, one is 340 CFM for $70, the other 405 CFM for $99. Harbor Freight has an identical blower, Portland 62337, 375 CFM for $47.
The battery operated shop blowers are nice too. They have a rubber nozzle and you can run them in a stubby config. I have the Dewalt one, Milwaukee has one as well. I’m sure there are others.
Great video. As a side, if your contacting the car it's best to not go from the top to the bottom & vice versa with the same towel, etc. Clean horizontally, not vertically. Vehicles are almost always dirtier on the bottom than the hood, roof, etc. Don't want any potential micro scratching brought up. Clean water buckets are a must.
Was cool to watch this knowing it was a 3 year old video. I have no idea why, but I’m all of the sudden very interested in getting the best foam I can. LoL. Love this content Josh. Really good channel.
What soaps do you recommend for ceramic coated vehicles? Rite now I am using Car Pro reset but that is some expensive soap to be using weekly. Also what drying aid would you use . Do you still use TC ?
Good information about a basic maintenance wash using good washing techniques. I especially liked the comment on the window cleaning. Clean microfibers and water........ That's brilliant for a maintenance wash and probably all that is needed. The only time you would need a dedicated window cleaner would probably be if you had some gunk or oily substances on the window. Many times the wipers will pick up gunk and spread it across the windows over time using them in the rain. You'd probably need an actual window cleaner to get rid of that gunk build up. I like Angelwax Vision. That stuff cut's through just about anything. Finishes streak free too. Good stuff.
Love your content. Question: What pressure are you running? As well as, what size tip and orifice size for sprayer? Thank you so much for all your great information on your videos.
Josh I'm happy to see you rinsing off the car first before any touching 👌🏽💥💯......I've seen some detailer start foam and start washing 🤔 not good ......keep the good work up Josh!!!! Great product from technician's choice 💥 my favorite go to spray wax 😮 same way I clean windows 😎 no chemicals
I definitely don't rinse first. You're blasting grit into the paint at 1,000+ psi which is not what I want to do. I want any of that stuff to be encapsulated by the time I rinse. I do rinse after the initial foam and then foam again for the contact wash. Two different products.
Great video Have you ever considered skipping the pre-rinsing process and going straight into foaming? I’m a detailer here in the South Bay and I’ll double foam cars. The first foam cannon has a little bit of APC on it. That helps breakdown the dirt then I rinse the car. The second time I from the car I go into my contact Wash but at that point the car is very clean
I’m considering what way I can provide a 30 minute wash, not skipping on wheels and final phase of polish like in the video. I’m thinking say Gsf with some Gs pre wash, 2 min or so then rince. While car is wet go over with Gsf in the bucket and mitt. The point is do we need a second foam part at all? The prewash will get rid of most grime and also lubricate for the hand wash to take place. Why sud the car again
I absolutely love the content. You’re my favorite TH-cam detailer. I’ve learned a lot from you and I appreciate it. I am curious, how do you tackle stuck on bugs and tar specks if foam and contact washing doesn’t get rid of them? Do you move to clay or is there a better way to get it off?
Well I’ve been doing my car wrong. I always Contact washed first then foam cannon! Then I saw a video on TikTok Simone m someone foam cannon first then contact wash the same way you did! Had me question myself and of course look up a video! Thanks!!
The only time you’d do it is when there is contamination on the panel and a chemical decontamination would not lift it. Mechanical decontamination (clay bar/glove) will always require polishing after if not compounding.
Feel your paint after you wash it with a general car wash soap no wax. If it feels rough you need to clay bar your paint. Take a clay bar and spray wax and Spray a small section of the vehicle paint with the spray wax and then take the clay bar and work in small sections. Kneed the clay frequently and then with your hand feel the paint it will start to feel super smooth. Take a clean micro fiber and gently wipe up the area you just worked. Keep this process up until you have made your way around the entire vehicle. Now your vehicle is ready for wax prep or ceramic prep.
What’s your view on cleaning perforated leather seats? I’ve seen a few videos on yt, but since your channel is my go-to channel, would appreciate to hear your method
@imjoshv, for bronze wheels what would you suggest? Also any recommendations oh how to ceramic a 2024 Mustang and detail tips? Trying to learn how to take great care of my car to include the interior, also im a big fan of your videos. Great work.
How do you know when the micro-towel is ready to be tossed ??? Just love the way the spray foam gives the car a beard. Nice work fella. Last thing, HOSE WATER OR DISTILLED WATER FOR GLASS ?? ATTENTION TO DETAIL OF THE LITTLE THINGS MAKE THE BIG THINGS HAPPEN FELLA.
great video! What do you charge for a car wash like the one in your video? Some videos I see you use an air blower to dry and others you're selling a twist loop? How do you make this decision? thanks!
Can you use that ceramic sealant after ever car wash..I wash my car once a week maybe twice..just need something after I air dry exterior but at trehe same time don't wanna over coat the car.. any recommendation
@IMJOSHV you’ve mentioned in previous videos, unless I’m mistaken, that you can dilute the si02 spray. What ratio do you use or am I mistaken and you use it at full strength?
I learned early in your videos and about my goto detail cermanic spray.Tech 582 is the shit.It can do many things well.I now recommend buying it in the largest size.Its that good.Also cant stress enuff atleast for me,get the better quality MF towels(whatever brand).No tags no edges,spend the money and just dont settle for the cheapest you can find.I prefer Adams towels but that just me.GJ Josh. I try support your channel when i can.Im sure this is out of your hands,shipping from CA to NC almost doubles my cost. Great video even if your a weekend warrior,i learned alot as usual.Thanks -- The combo of this channel and Pan are terrific.Honest opinions -how to and more.Ive learned to spend my money much efficently.Thanks
Great videos! Thank you... with the ceramic detail spray does it matter if the paint isn't ceramic when using a ceramic detail spray? Should one use a different detail spray? Or is the Technicians Choice TEC582 Ceramic Detail Spray good for all vehicles? Thanks again!
I love the videos. Why do I see so many detailers rinse the foam wash off then go into the 2 bucket method? Seems like a waste since you have the lubricating foam on the car already and you can't replicate that with a bucket. Thanks again!
While I think this run-through is great for people wanting a fast workflow, I think it's worth noting that this style of wash will only work with a very well maintained vehicle that is washed frequently and likely has full protection coatings across the vehicle. Not saying it won't work for uncoated vehicles, but that certainly speeds things up drastically
To rinse the car after you apply the Adams mega foam, would you ever go to a 25° spray nozzle or is that too strong? My Sunjoe pressure washer says I should only use the 40° but it seems to not be strong enough to rinse off the foam unless I go really slow with it. Thanks for your channel. I just bought a Ford bronco and due to the soft top, I wash it myself. Your videos have been very helpful.
You can use the 25/40 nozzle is our go to, it’s all about the pressure 1200-1500 psi you’ll be fine. We like 25 nozzle for wheel and rockers panels. We use a MTM spray gun SGS28 Swivel version.
I'll check out that Technicians Choice. Have you tried Wizards Mist-N-Shine? Also really good stuff. One tip I never see mentioned is regarding product storage. Most people's garages are unconditioned. The hot summers and freezing winters have ruined some of my products, so I now keep them inside the house at room temperature.
Josh, not sure you will ever see this as I know your video here is at least 2 years old. I would like to get your thoughts on not rinsing a vehicle first, instead foaming first, then rinse, then foam, wash with micro fiber, etc. I've heard a couple of folks talk about doing it this way because they feel with the rinsing first, the water left on the car actually dilutes the foam soap thus decreasing its effectiveness. I guess the thinking is the water is actually creating a barrier between the soap and the vehicle. I've always been a rinse first then soap person, but I'm not so sure that is the best way. Soaping first and not rinsing first, so your aren't leaving water on the car before soaping kinda makes sense. What do you think? Thanks, great videos, really appreciate them.
Hi yeah I’ve heard that argument as well and it depends on the situation for me. If I’m do a pre soak with a higher ph soap I’ll do it before rinsing the car so it has the most impact. Otherwise I typically will rinse them foam then contact wash. When I started 19 years ago we didn’t have foam cannons so it was rinse them bucket wash. So I’ve added in the foam as a way to add more of the soap lunrication and the added benefit of it starting to help break things down so I don’t have to agitate as much. But as a mobile detailer I only carry so much water with me, so foam, then rinse, then foam, contact wash, and rinse uses a lot of water for me and makes it hard to contain my run off
I had a question man so now that I bought a foam cannon do I still need to use a shampoo and rinse bucket to my steps or can I just use the foam with the rinse bucket ? Thank you man love your videos
Thx so much! One question what pressure is your pressure washer? I only have a 3200psi version and think it is too high so I use a bigger nozzle to reduce the force of the jet.
How do you feel about PPF? Im getting a 2024 Mustang Dark Horse, and am seriously considering ceramic coating and PPF. I would appreciate your input on this subject. Thank you.
I have started using a microfiber sponge for the inside of the wheel, imo it’s a lot easier than the straight stick but some cars rotors are so big there’s no wheel clearance
Thanks for sharing your process. I personally have found spraying a claylube dilution level of ONR after the rinse, but before the foam/wash adds a good deal more glide to the wash mitts and cleans effectively. It also seems to help reduce soap residue drying as fast in hot days.
@@Blaze_556 I wouldn't say spot free, but it helps. It definitely improves the feel of the mitt during the wash. I also use an once in my Rinse bucket to help the dirt release easier.
Hey Josh, is there a time of day that you prefer to start due to the sun? I would imagine you have to work fast in the afternoon. How do you work around having to polish in the sun?
Do you use the same ~300 gsm microfiber towels for your contact wash? Or something a little more plush? Done a few maintenance washes with a mitt and really like the idea of switching over to microfiber towels to skip the rinse.
Great video. What’s your process for cleaning up micro fiber after getting loaded up with contaminants? Specific detergent, additive, dryer settings, etc.
What I use is a degenerate specially designed for ( most detailing websites have it ) washing micro fiber towels on cold water only. Dryer low heat, approximately 60 minutes …
Love your videos, wish I found them sooner! What is the fiberglass tank in the corner to the left of the garage door as you're looking out from the inside? Is that a compressed air receiver tank?
Hi, I’m a new subscriber to your channel. I am learning a lot from your videos that I want to incorporate into taking care of my new truck and my travel trailer. I have products already for my trailer but I’m wondering, can you apply the ceramic spray to vehicles that have a regular clear coat or is there a better product for that? Also, I read that the ceramic spray can also be used in conjunction with a ceramic polish . Would you apply the polish first before using the spray or vise versa? Thank you for the time and information you put into your videos. Very helpful especially for people that never really did this for themselves… Using automated car washes.
Just cut up grout sponge, one without the abrasive side, from Home Depot and toss it after. It's way cheaper and very effective for tire gels like Sonax and so on. One sponge cut up neatly with a sharp razor blade or utility knife will get you like 10 to 15 applicators.
On a hot sunny day does the thick foam dry before you can get to it? If that's the case should I rinse and reapply soap just one side and then the other? Or is foam thick enough not to dry?
Im buying my first pressure washer soon but wanted to know why you dont rinse off the foam after atep 3. Wont it cause scratches if you wipe it after the foam lifts the dirt from the paint? Is a rinse needed?
Do you wash and re-use the wash cloths or is there concern of transferring contaminates? Also, does that ceramic based quick detailer make the cloths less absorbent for the next use or are they good after washing? Thanks!
Thanks, good for a rookie like me who is tired of paying for car washes. The foam cannon you list is not in stock. Can you recommend another reasonable one?
How do I know if my car has a ceramic sealant? I'd like to use the SIO2 sealant or something appropriate for my car after my maintenance wash. I drive a 2017 Infinity Q50. Would it be appropriate for me to use the sealant you mention in this video? Thanks!
I was always told not to rinse before foaming. Pre-rinsing supposedly dilutes the foam, not allowing it to do what it is supposed to do. Can you please clarify any truth to that? Also, why do you do your wheels and tires before the car? I was always told to do the opposite.
Thanks Josh for your helpful videos i learn good information from you. I watch a lot of other sites too but I’m going to ask you this because I feel you’ll give me a straight up answer. I always been miffed at how long detailers let soap almost dry up on the vehicle while giving a demonstration video. When I use my foam cannon in the way you did and a lot of other do also (as the wash soap) I find that before I’m even done with half the car that the foam is drying up on the other half and that’s with a heavy Application of soap even in shade. Does this happen to you too. Thanks very much.
Hey Josh I’m a new subscriber from New York I was wondering on any tips and products for matt factory paint I have a f150 black widow with factory Matt paint from acs (Georgia) any advice will be appreciated thank you God bless
Hi it seems that you are using the same soap in the bucket and the foam gun,,,if so do we have to rinse the car after the foam canon or you leave it on and wash the car ? Thanks for your great videos Hello from Europe
Never thought about using a leaf blower. Very smart
I thought using a foam canon was all you need to do to wash a car. Spray the foam, rinse it off, and you are done. Thank you for the education. Subbed.
You’re kidding. Right?
@@sentino68dude it can work like that if you have great chemicals. You can get 90+% of your dirt off with that
Yesterday I used that ceramic detail spray on my new car. Wow! It’s incredible. I liked the results so much I used it on our 2015 Honda Odyssey and…wow! It’s like the ultimate detailer’s secret!
That stuff is fantastic!!
Thank you for all your videos...it helped me choose the proper pressure washer hose, gun and orifice for my electric pressure washer. Keep up the great work!
Same here thanks OG
The blower he is using is a Toro Ultra, Model 51619. There are 2 models, both are 260MPH, one is 340 CFM for $70, the other 405 CFM for $99. Harbor Freight has an identical blower, Portland 62337, 375 CFM for $47.
The battery operated shop blowers are nice too. They have a rubber nozzle and you can run them in a stubby config. I have the Dewalt one, Milwaukee has one as well. I’m sure there are others.
I got an Active pressure and the Uber flex thanks to you, Josh.
Great video. As a side, if your contacting the car it's best to not go from the top to the bottom & vice versa with the same towel, etc. Clean horizontally, not vertically. Vehicles are almost always dirtier on the bottom than the hood, roof, etc. Don't want any potential micro scratching brought up. Clean water buckets are a must.
Excellent video and tips. The best that I’ve seen so far.
Just Water !!! Water cleans 💯 Luv it brother no need for to much chemicals
I used to be a valet. After 4,000 rpm’s the vanquish sounds like nothing else. It’s one of the best sounding cars ever!
Was cool to watch this knowing it was a 3 year old video. I have no idea why, but I’m all of the sudden very interested in getting the best foam I can. LoL.
Love this content Josh. Really good channel.
I recommend sprayaway ammonia free glass cleaner you can get it at Walmart that’s why I use for my car at home and it’s works amazing
What soaps do you recommend for ceramic coated vehicles? Rite now I am using Car Pro reset but that is some expensive soap to be using weekly. Also what drying aid would you use . Do you still use TC ?
Adam's megafoam or use a ph neutral soap.
I wash my car with the two bucket method. After seeing how you wash the car using towel, I will try this on my car. Thank you.
Good information about a basic maintenance wash using good washing techniques. I especially liked the comment on the window cleaning. Clean microfibers and water........ That's brilliant for a maintenance wash and probably all that is needed. The only time you would need a dedicated window cleaner would probably be if you had some gunk or oily substances on the window. Many times the wipers will pick up gunk and spread it across the windows over time using them in the rain. You'd probably need an actual window cleaner to get rid of that gunk build up. I like Angelwax Vision. That stuff cut's through just about anything. Finishes streak free too. Good stuff.
Love your content. Question: What pressure are you running? As well as, what size tip and orifice size for sprayer? Thank you so much for all your great information on your videos.
Josh I'm happy to see you rinsing off the car first before any touching 👌🏽💥💯......I've seen some detailer start foam and start washing 🤔 not good ......keep the good work up Josh!!!! Great product from technician's choice 💥 my favorite go to spray wax 😮 same way I clean windows 😎 no chemicals
Thanks 👍
I definitely don't rinse first. You're blasting grit into the paint at 1,000+ psi which is not what I want to do. I want any of that stuff to be encapsulated by the time I rinse. I do rinse after the initial foam and then foam again for the contact wash. Two different products.
Great video
Have you ever considered skipping the pre-rinsing process and going straight into foaming?
I’m a detailer here in the South Bay and I’ll double foam cars. The first foam cannon has a little bit of APC on it. That helps breakdown the dirt then I rinse the car. The second time I from the car I go into my contact Wash but at that point the car is very clean
absolutely. instead of apc i usually use a pre wash like auto foam from bilt hamber. foam, rinse, foam with a ph neutral soap and contact wash.
I’m considering what way I can provide a 30 minute wash, not skipping on wheels and final phase of polish like in the video.
I’m thinking say Gsf with some Gs pre wash, 2 min or so then rince. While car is wet go over with Gsf in the bucket and mitt. The point is do we need a second foam part at all? The prewash will get rid of most grime and also lubricate for the hand wash to take place. Why sud the car again
@@elmirbrdar1045just foam,rinse,then contact wash..dont overthink
I absolutely love the content. You’re my favorite TH-cam detailer. I’ve learned a lot from you and I appreciate it. I am curious, how do you tackle stuck on bugs and tar specks if foam and contact washing doesn’t get rid of them? Do you move to clay or is there a better way to get it off?
Just in time for dinner and a clip! Thanks for the great content homie! 🙏🏼
Well I’ve been doing my car wrong. I always Contact washed first then foam cannon! Then I saw a video on TikTok Simone m someone foam cannon first then contact wash the same way you did! Had me question myself and of course look up a video! Thanks!!
I use Seal n Shine on the windows to keep them beading water when it rains.
Great video, as always. I have pretty much bought every product you recommended. Thank you again.
I would love to see a video on the clay bar process on how to do it and when this should be done?
The only time you’d do it is when there is contamination on the panel and a chemical decontamination would not lift it. Mechanical decontamination (clay bar/glove) will always require polishing after if not compounding.
Feel your paint after you wash it with a general car wash soap no wax. If it feels rough you need to clay bar your paint. Take a clay bar and spray wax and Spray a small section of the vehicle paint with the spray wax and then take the clay bar and work in small sections. Kneed the clay frequently and then with your hand feel the paint it will start to feel super smooth. Take a clean micro fiber and gently wipe up the area you just worked. Keep this process up until you have made your way around the entire vehicle. Now your vehicle is ready for wax prep or ceramic prep.
Awesome video Josh. Can I still use the ceramic spray if the vehicle I washed has some swirl marks on it? Will it make anything worse?
tech ceramic spray works wonders. Even after a wash with swirls. Adds that layer of protection for weeks to months. Using a Ph balance car soap
What’s your view on cleaning perforated leather seats? I’ve seen a few videos on yt, but since your channel is my go-to channel, would appreciate to hear your method
Ko
@imjoshv, for bronze wheels what would you suggest? Also any recommendations oh how to ceramic a 2024 Mustang and detail tips? Trying to learn how to take great care of my car to include the interior, also im a big fan of your videos. Great work.
Great vid josh once again, how would youndo the process for a bigger vehicle, like an SUV ? Any videos or one in the making ?
Outstanding videos Josh! I have learned a lot and always look forward to washing my vehicles and try out something new I have learned.
Awesome tutorial mate - thanks from Melbourne 🇦🇺
👍👍👍 thanks!!
Norwex rags are hands down the best thing for windows. Norwex rag and a bucket of water. That's it!
I like the one bucket method. I way over bought towels. I have like 25 extra towels like the ones you use.
How do you know when the micro-towel is ready to be tossed ??? Just love the way the spray foam gives the car a beard. Nice work fella.
Last thing, HOSE WATER OR DISTILLED WATER FOR GLASS ??
ATTENTION TO DETAIL OF THE LITTLE THINGS MAKE THE BIG THINGS HAPPEN FELLA.
Great video and guidance. Car looks awesome !!
great video! What do you charge for a car wash like the one in your video? Some videos I see you use an air blower to dry and others you're selling a twist loop? How do you make this decision? thanks!
Can you use that ceramic sealant after ever car wash..I wash my car once a week maybe twice..just need something after I air dry exterior but at trehe same time don't wanna over coat the car.. any recommendation
Hey, buddy, love your videos quick question period so on the ceramic detail. Can I use that on a vehicle that already has a traffic coating? Maybe?😊
Thanks for the great vid. Can you do a step by step on a SUV and maybe one on leather seats? Thanks again
@IMJOSHV you’ve mentioned in previous videos, unless I’m mistaken, that you can dilute the si02 spray. What ratio do you use or am I mistaken and you use it at full strength?
Have you permanently switched from Mr. Pink to Adams?
I learned early in your videos and about my goto detail cermanic spray.Tech 582 is the shit.It can do many things well.I now recommend buying it in the largest size.Its that good.Also cant stress enuff atleast for me,get the better quality MF towels(whatever brand).No tags no edges,spend the money and just dont settle for the cheapest you can find.I prefer Adams towels but that just me.GJ Josh. I try support your channel when i can.Im sure this is out of your hands,shipping from CA to NC almost doubles my cost. Great video even if your a weekend warrior,i learned alot as usual.Thanks -- The combo of this channel and Pan are terrific.Honest opinions -how to and more.Ive learned to spend my money much efficently.Thanks
Statues will be erected in your name. Streets should be named after you. Seriously, thank you, brother. Such dedication to your craft.
Do you wash your microfiber towels and reuse? Of so how?
Wash them, Just like you would your clothes when they’re dirty
@@dragonzdoser2071and wash them separately by purpose. you don’t want cross contamination or such
Wash in warm water with nothing else
@@aguccislide6132not going to put one towel in the washing machine at a time dude 😂😂. That’s a WASTE of electricity!!
@@CeeWorld69 yeah well obviously you’d just hand wash at that point. i’m talking about those with packs of towels
Great videos! Thank you... with the ceramic detail spray does it matter if the paint isn't ceramic when using a ceramic detail spray? Should one use a different detail spray? Or is the Technicians Choice TEC582 Ceramic Detail Spray good for all vehicles? Thanks again!
I love the videos. Why do I see so many detailers rinse the foam wash off then go into the 2 bucket method? Seems like a waste since you have the lubricating foam on the car already and you can't replicate that with a bucket. Thanks again!
While I think this run-through is great for people wanting a fast workflow, I think it's worth noting that this style of wash will only work with a very well maintained vehicle that is washed frequently and likely has full protection coatings across the vehicle. Not saying it won't work for uncoated vehicles, but that certainly speeds things up drastically
Do you have a recommended microfiber for the contact wash? Trying to decide between 350 and 500 GSM edgeless from The Rag Company
Thanks for the simple steps. I will try this. Can you do a video cleaning a vehicle with a matte finish please 🙏
Good stuff. Do u ever use clay in your preparation before waxing
To rinse the car after you apply the Adams mega foam, would you ever go to a 25° spray nozzle or is that too strong? My Sunjoe pressure washer says I should only use the 40° but it seems to not be strong enough to rinse off the foam unless I go really slow with it. Thanks for your channel. I just bought a Ford bronco and due to the soft top, I wash it myself. Your videos have been very helpful.
You can use the 25/40 nozzle is our go to, it’s all about the pressure 1200-1500 psi you’ll be fine. We like 25 nozzle for wheel and rockers panels. We use a MTM spray gun SGS28 Swivel version.
Another great video. What degree tip do you use on your pressure washer? Also, what leaf blower are you using?
Great advice!
Stay safe and blessed
Kevin
I'll check out that Technicians Choice. Have you tried Wizards Mist-N-Shine? Also really good stuff. One tip I never see mentioned is regarding product storage. Most people's garages are unconditioned. The hot summers and freezing winters have ruined some of my products, so I now keep them inside the house at room temperature.
Josh, not sure you will ever see this as I know your video here is at least 2 years old. I would like to get your thoughts on not rinsing a vehicle first, instead foaming first, then rinse, then foam, wash with micro fiber, etc. I've heard a couple of folks talk about doing it this way because they feel with the rinsing first, the water left on the car actually dilutes the foam soap thus decreasing its effectiveness. I guess the thinking is the water is actually creating a barrier between the soap and the vehicle. I've always been a rinse first then soap person, but I'm not so sure that is the best way. Soaping first and not rinsing first, so your aren't leaving water on the car before soaping kinda makes sense. What do you think? Thanks, great videos, really appreciate them.
Hi yeah I’ve heard that argument as well and it depends on the situation for me. If I’m do a pre soak with a higher ph soap I’ll do it before rinsing the car so it has the most impact. Otherwise I typically will rinse them foam then contact wash. When I started 19 years ago we didn’t have foam cannons so it was rinse them bucket wash. So I’ve added in the foam as a way to add more of the soap lunrication and the added benefit of it starting to help break things down so I don’t have to agitate as much. But as a mobile detailer I only carry so much water with me, so foam, then rinse, then foam, contact wash, and rinse uses a lot of water for me and makes it hard to contain my run off
I had a question man so now that I bought a foam cannon do I still need to use a shampoo and rinse bucket to my steps or can I just use the foam with the rinse bucket ? Thank you man love your videos
Thx so much! One question what pressure is your pressure washer? I only have a 3200psi version and think it is too high so I use a bigger nozzle to reduce the force of the jet.
How do you feel about PPF? Im getting a 2024 Mustang Dark Horse, and am seriously considering ceramic coating and PPF. I would appreciate your input on this subject. Thank you.
So is rinsing first necessary? Or can I go straight to foaming and then contact wash then rinsing 🤔
I have started using a microfiber sponge for the inside of the wheel, imo it’s a lot easier than the straight stick but some cars rotors are so big there’s no wheel clearance
Thanks for sharing your process. I personally have found spraying a claylube dilution level of ONR after the rinse, but before the foam/wash adds a good deal more glide to the wash mitts and cleans effectively. It also seems to help reduce soap residue drying as fast in hot days.
So the onr acts as a spot free rinse of sorts?
@@Blaze_556 I wouldn't say spot free, but it helps. It definitely improves the feel of the mitt during the wash. I also use an once in my Rinse bucket to help the dirt release easier.
Do you leave the foam canon foam,soap, on the car when doing the contact wash?
Hey Josh, is there a time of day that you prefer to start due to the sun? I would imagine you have to work fast in the afternoon. How do you work around having to polish in the sun?
Do you use the same ~300 gsm microfiber towels for your contact wash? Or something a little more plush? Done a few maintenance washes with a mitt and really like the idea of switching over to microfiber towels to skip the rinse.
We should play a drinking game that revolves around how many times Josh says "perfect". All kidding aside, great video!
Or "guys".
Great video. What’s your process for cleaning up micro fiber after getting loaded up with contaminants? Specific detergent, additive, dryer settings, etc.
What I use is a degenerate specially designed for ( most detailing websites have it ) washing micro fiber towels on cold water only. Dryer low heat, approximately 60 minutes …
Look for a product called “rags to riches”
Good tips I use a fragrance free detergent and never use fabric softener.
Do you dilute the detail spray and if so, how much. 9:00
Love your videos, wish I found them sooner! What is the fiberglass tank in the corner to the left of the garage door as you're looking out from the inside? Is that a compressed air receiver tank?
hi, do you usually use same kind of liquid for both prewash and regular wash when using the foam cannon?
thanks for your video helps a lot just wondering if you can tell us how to clean cream leather for the car thanks again
Hi, I’m a new subscriber to your channel. I am learning a lot from your videos that I want to incorporate into taking care of my new truck and my travel trailer. I have products already for my trailer but I’m wondering, can you apply the ceramic spray to vehicles that have a regular clear coat or is there a better product for that? Also, I read that the ceramic spray can also be used in conjunction with a ceramic polish . Would you apply the polish first before using the spray or vise versa? Thank you for the time and information you put into your videos. Very helpful especially for people that never really did this for themselves… Using automated car washes.
What type of pad did you use to put on the tire dressing at the end of the video?
Just cut up grout sponge, one without the abrasive side, from Home Depot and toss it after. It's way cheaper and very effective for tire gels like Sonax and so on. One sponge cut up neatly with a sharp razor blade or utility knife will get you like 10 to 15 applicators.
@@kurts3779been using the same grout sponge for a year now. Still holding up very well
Which is the better product Adams Mega foam or Chemical Guys honeydew snow foam?
Can you make a video on the ceramic finishing spray.
How you apply it.
Thanks again.
On a hot sunny day does the thick foam dry before you can get to it? If that's the case should I rinse and reapply soap just one side and then the other? Or is foam thick enough not to dry?
Im buying my first pressure washer soon but wanted to know why you dont rinse off the foam after atep 3. Wont it cause scratches if you wipe it after the foam lifts the dirt from the paint? Is a rinse needed?
Josh, what microfiber towels do you use for contact wash?
Do you wash and re-use the wash cloths or is there concern of transferring contaminates? Also, does that ceramic based quick detailer make the cloths less absorbent for the next use or are they good after washing? Thanks!
Can you use technicians choice weekly?
Thanks, good for a rookie like me who is tired of paying for car washes. The foam cannon you list is not in stock. Can you recommend another reasonable one?
I just tried out this one and was really impressed for the price! www.amazon.com/dp/B0CH9QWJHY/?tag=detailgreen-20
When you are doing all the rinsing with the pressure washer what tip do you have on it? Is the full psi tip too much pressure for a car?
Do one for interior process
Hey hello was wondering what’s your thoughts on the Bauer 2000
Thanks for your very informative videos. How long it's take you and how much we can ask for something like that to a client?
Josh , you have to up your game and get a pro dryer. Great detail job.
I have haha. I actually did a review on it
“Perfect”!
Josh, I do not see the link for this special window product.. "water" you called it?
Can the ceramic detail spray only be used with ceramic coated vehicles?
How do I know if my car has a ceramic sealant? I'd like to use the SIO2 sealant or something appropriate for my car after my maintenance wash. I drive a 2017 Infinity Q50. Would it be appropriate for me to use the sealant you mention in this video? Thanks!
Do you wax? and if so which wax do you prefer? and if your going to wax would u still finish the dry with the ceramic spray?
Always quality videos
I was always told not to rinse before foaming. Pre-rinsing supposedly dilutes the foam, not allowing it to do what it is supposed to do. Can you please clarify any truth to that?
Also, why do you do your wheels and tires before the car? I was always told to do the opposite.
Thanks Josh for your helpful videos i learn good information from you. I watch a lot of other sites too but I’m going to ask you this because I feel you’ll give me a straight up answer. I always been miffed at how long detailers let soap almost dry up on the vehicle while giving a demonstration video. When I use my foam cannon in the way you did and a lot of other do also (as the wash soap) I find that before I’m even done with half the car that the foam is drying up on the other half and that’s with a heavy Application of soap even in shade. Does this happen to you too. Thanks very much.
Hey Josh I’m a new subscriber from New York I was wondering on any tips and products for matt factory paint I have a f150 black widow with factory Matt paint from acs (Georgia) any advice will be appreciated thank you God bless
Great video! One item jumped out at me while you were wiping/washing the lower section and moving up using the same rags, thought that was a no-no?
It looks like he flipped the rag over to a clean side
Hi it seems that you are using the same soap in the bucket and the foam gun,,,if so do we have to rinse the car after the foam canon or you leave it on and wash the car ? Thanks for your great videos Hello from Europe
Same question , ,
Do you not need to rinse after foaming the car? I’ve always thought snow foam, rinse, then contact wash, rinse?
So is it safe to use the Chemical guys mister pink foam so on a ceramic coated vehicle
Enjoyed your video, could you list your product links...
What did you use to shine the tires
You must have good quality water. In Indiana that window method would have white hard water spots all over it.