How to get MORE FOAM from your Foam Cannon | Car Detailing Tips and Tricks | Pressure Washing
ฝัง
- เผยแพร่เมื่อ 9 มิ.ย. 2020
- I get asked all the time how i get so much foam out of my foam cannon. Alot of people complain about it being too watery especially when they are using a lower Gallons Per Minut ELECTRIC pressure washer. Most foam cannons are rated for high GPM units, but this one little trick will make even the cheapest pressure washer and foam cannon spray thick foam!
See the items I use and join the mailing list at: www.DTLRsupply.com
✅ 1.1 mm orifice for foam cannon
amzn.to/3wJGhJL
Links to Products used:
RYOBI 1900 PSI 1.2 GPM Cold Water Wheeled Electric Pressure Washer
Model# RY1419MTVNM
www.homedepot.com/p/RYOBI-190...
RYOBI 1,800 psi 1.2 GPM Wheeled Electric Pressure Washer
Model# RY1418MT
www.homedepot.com/p/RYOBI-1-8...
My Pressure Washer Gun of Choice:
amzn.to/39OfXBw
ProPulse 50' pressure Washer hose
amzn.to/38HtE5c
Foam Cannon:
amzn.to/2TwVAGJ
My Favorite Soap:
amzn.to/2Rsobfu
1.1 mm orifice for foam cannon
amzn.to/3v1k752
Quick Connects for Pressure Washer
amzn.to/2SFKPhX
Pressure Gauge for Pressure Washer
amzn.to/3bTyrCS
**These are affiliate links to the products. We make a small commission on anything purchased from our links.
#cardetailing #Foam #FoamCannon
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. (IMJOSHV) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not (IMJOSHV) or any business affiliated to (IMJOSHV). - ยานยนต์และพาหนะ
I use hot water when I mix my soap in the canon. Not boiling, just hot from the kitchen sink. It really helps make thicker foam that stays on longer.
I wonder why that works. The water coming from the hose is pretty cold.
@@koreywilliams4570 It’s using soap/water from the cannon. So it kinda mixes I’m guessing?
Soap is half oil. Hot water increases viscosity of oil
lowers viscosity* Basic physics, the hotter a fluid, the lower its viscosity will get.@@Mrkevi123
@@Mrkevi123 hot water would lower the viscosity. Think about warming up butter, butter is also oil but when you heat it up it liquifies and has movement. Higher viscosity means it has less ability to move/flow, just wanted to throw that out there for everyone. I'm not sure that's the reason why it creates more foam, just my two cents
I have watched so many detailing videos for the past 2 years because I love detailing and I have never ever seen a video like this that explains and shows how to get all that extra foam without having to buy a $100 gun. You gained a new SUBSCRIBER man great job 💪🏼💪🏼💪🏼💪🏼💪🏼
Frrrrrr
Agree with you. Been trying to do this with much more expensive guns to no avail, but nice easy simple!
Very helpful. Thanks for taking the time to make this. Haven’t tried it yet but I changed out the orifice first before even trying the cannon!
The one thing every foam cannon reviewer on TH-cam has been leaving out! This was so helpful bro, I appreciate it.
HOLY CRAP, just followed the 2 big tips ... the brass fitting and water to soap ratio and LIFE CHANGING just WOW, it took me longer to set up everything than it did to do a wash and granted no detailing but i'm washing a Tundra CrewMax with a Smart Cap, THANK YOU !!!!
Thanks for the great tip! This is a game changer for me. I have the same cheap foam cannon and chemical guys soap. Usually the foam runs off so fast, I’m rushing with my detail brush. Just ordered the orifice and can’t wait to change it out.
I never new about changing out orifice dimensions and quick connects, uberflex hose, snub nose stubby pressure washer gun. I always used the stock crap in the box, i totally trick myy pressure washer tfff out now, appreciated my dude, salute
You are the only person who has ever talked about this. There might be others out there I personally have never seen a video like this before yours. I have seen people who complained about the foam coming out. They try to make adjustments and even changing their soap. After seeing many of those types of videos I wasn't sure if I would have the same result so I just decided to pass on it. After seeing this I'm most definitely going to buy one.
Thanks for the useful information. I always make sure to leave a big old thumbs up when I watch your videos. And I have already been a subscriber just never saw this video.
Look forward to watching more of your videos.
Thank you so much! This combined with the hot water trick from the comments gave me extremely thick foam! Now to make the supply last longer....
Nice tip.. I lost count how many of your videos I’ve watched in the past 8 days or so. Tons of great info
i know this is a late post but, just been trying to watch a lot of videos since you explain a lot of important things. ill be investing in a Ryobi PW and because of this, its making me more and more excited to get a PW of my own since my main method of washing was rinseless/hoseless washes so thank you for all that you do!
Thank you, Josh. This tutorial improved my car detailing.
I finally got shaving cream foam from a very cheap Amazon foam canon. I changed the orifice, got good foam and my regular power wash (Costco Spyder - 2000 psi, 1.2gpm). I added a short gun and that is it. The result is amazing. I wish I could upload videos here.
Just subscribed. I am a non-professional detailed of my own cars. It’s refreshing to see someone use equipment that doesn’t cost hundreds or thousands of dollars to get excellent results. Thank you!!!
Thanks for the sub!
Awesome video. Everything else suggests getting a better cannon, or adding a ton more soap to the reservoir (wasting products and $$). I didn't realize it could be this simple of a solution. Thanks a million!
2 years later and this video solved my problem! Thank you.
Excellent video and I'll have to try this once I get up and running with my setup. Thanks.
I’ve always wondered how to create that much foam in car washing but with this video, everything is clear now. Thanks for the info man.
I purchased the foam Canon pro and the 1.1 tip after watching this video. A 1.25 AND 1.1 tips was included with the foam Canon pro. I did not need to purchase the tip separately. Heads up for others.
Great video, very helpful.
and from the girls in the back.... I never thought I'd be interested in something like this, but you have taught me SO much! My husband passed away, and it's just so nice to learn this kind of thing so that I can do things without calling 1 800-handyman! You gained a female subscriber that can't wait for your next how-to- video! Thank you!
brilliant as always Josh! Thank you!
Just found you in suggested and subscribed. There's a lot of obscure things no one talks about so it's good to see you doing so. Good luck on your growth!
Thanks so much!!! Really appreciate it
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use th-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
😱 What a tip!!!! You’re doing awesome 👏🏼 I’ll try it
Thank you. This is what I was looking for. Easy fix. Thanks again.
Bought the Amazon one, surprised how well it worked w/my Chem Guys soap. Just ordered the replacement orifice, great tip - very good video!!!
I would be careful with Chem Guys soaps because while their descriptions say it doesn't strip wax, reading the comments will give you the exact opposite impression.
Great video. Thanks. Very informative and easy to follow.
dude... DUDE.... thank you! This is precisely the kind of info I scour TH-cam to find. It's the tips like these that make all the difference.
Glad it helped! Thanks for watching
this actually works and one of your other video on same issue is also very informative and helpful. Love and support from India
Awesome tip. Thanks man! Worked great for my $30 Suds Lab foam cannon.
Great video Josh, thanks.
I went and bought a set of the smaller bore 'orifice'. Great! I went to get the ptfe tape that came with my cannon only to find that there was one in the small seal bag that it came in. No biggie, just a note to the wise, check your own supply before you buy...lol
Thanks for the video. Answered my questions.
Thanks so much, been trying to solve this problem!
Pure gold!!! Mine is always runny will be getting a 1.1mm orifice
Thank you man, appreciate the advice and education. Keep up the good work 👍
Great job, easy to follow. Thanks
Thank you. The channel is steadily growing. Congratulations!!! 🍻
Yes! Thank you! Slowly but surely!
@@imjoshv said that the seller vvvvvv
Great simple video, thanks!
New subscriber. Starting my mobile car wash business and I’m learning from your videos. Thank you!
Bravo Zulu…this was so helpful man!
Thank you man!!
Amazing, thanks for the link up and how-to 👍🏻👍🏻
Any time!
Super helpful vid. I had no idea where that orafice went. Thx.
Josh, you’re my detailing Hero! Honest and Helpful!
Thank you can’t wait to try this out 💜
Few people are in this world who are capable and are ready to share solutions with others for free. You are one of them
Thank you for your time and efforts. Love you
Thanks so much Syed! Appreciate it!!
That's really clever, great to the point advice
10 out of 10
Cool Beans ! You did a great job explaining the whole process.
Thanks 👍
Appreciate all of your videos. I learned a lot very fast. I bought the Costco Greenworks pressure washer for $149 and love it. Thanks.
Awesome happy to hear!!
Sweet knowledge bro. Thank you 🙏
Crazy how i just figured this out and ordered the 1.1 orifices and then boom this video! great advice bro thanks for sharing
Awesome glad it helped!!
Subbed and T-up. Best tip ever. To be able to reduce the water coming in makes so much difference. Thanks for sharing bro.
Awesome tip thanks Josh
Great tip, I use the Karcher foam kit which is good, there is a more foam dispersion when top up with warm water but not as much as you demonstrate in your video, thanks for sharing.
You're freaking brilliant man!!!
Very detailed explanation 10/10
Thanks for the vid. You now have another newbie subscriber.
Ordered new jets from the link, definitely makes more foam!
You're a legend for this lol. I have the same cannon and I hated the watery foam!
Phenomenal stuff . I just ordered all of the items in the description.
Awesome!
Just ordered mine also. Thanks bro. U da real MVP!!
Also u got urself a new subscriber n put a 👍. Lol. Thanks again.
Great tip that really helps. Thanks.
Fantastic tip thank you!
Thanks a lot homie for all your priceless videos and info for us car enthusiasts!
My pleasure!!
Fantastic thank you for your time,great video
Thank you so much for your detailed step by step and information. Cheers to your channel.
Glad it was helpful!
Thank you for your video and your guiding in your video. I have just started my business following your video and links. Awesome video!!
Fantastic!
Thank you for this tip. Going to Amazon to order.
Just got this whole setup even the electric pressure washer from the depot wish me luck...I'm hyped up can't wait till the weekend to try it out
Awesome!!
This is a great tip, thank you from the other side of the pond.
Thx for a great video! I find my foamgun not making not thick enough foam so this is a great tip! had no idea there were an interchangeable nozzle inside, awesome!
Your video are great very detailed I’m going to try that on my worx
Many thanks for posting this vid! Just ordered the 1.1 orifice off amazon
Anytime!!
Many thanks. simply explained
Thank you. Going to try it
As always great video! The amount of detail you go into is incredible. And always a visual aid. I wish the teachers in the school system were as good as you!
Wow thanks so much!
Thanks, that was a good and clear demo, I might even use it to spray my Christmas tree next Xmas!😎
Glad it was helpful!
Thank you for this video!
Thank you for the video bro...very helpful
thank you! this is big help!
great tips!
I never knew what I was missing with the larger office! Just ordered the 1.1 and can't wait to test it out!
I know it's been 2 years but have you got any feedback?
Thanks bro. I just ordered off of your links ,I can't wait to use it
Awesome thank you!
You earned a sub with that one thanks bro Great vid
Thank you so much for this video all the way form South Africa 🌍
Super helpful video. Thanks!
Glad it was helpful!
Sir thank you very much for such a great video.
Legend is you. No one else. Thanks brother. Peace out \m/
Great tip I changed my foam cannon and it helped
awesome!
See that's what I'm looking for‼️
Great tip. The budget foam cannons do a great job with just a little modification.
You bet! You don’t always have to spend a bunch of money to get good results
Subscribed!
Great and useful content. Generous with your experience. Thank you!
Thanks!!
Great video. Thanks for the helpful info
Glad it was helpful!
Nice!! Big difference...thanks !!
You bet!
Great video. Helped with cleaning my pool cage.
👍👍
Thanks and great video
Thanks for that trick! I’ll save so much soap now lol
Any time!
You deserve a like you explain every detail I like that 👍
Thanks!!
I got the ryobi 40 volt hp whisper series 1500 psi 1.2 gpm I’m impressed with the pressure washer for being battery power with boost mode on it foams really good as well have lots
Of
Batteries so runtime is no issue
Good stuff!
Great video. Very useful!
Glad it was helpful!