Chasing a no start when hot issue on the 2012 kx450 I just got. Valves are in spec, fuel pump leaks and has a huge glob of weld stick on the bottom. New pump and clean my injector I hope does the trick.
@@triple.pistons Headgasket is leaking, it's still broken lol. I have lots of other bikes I've been riding and working on this season, no love to the kx yet.
@@danjim7056 you think leaking head gasket is the problem with hot start issue? I replaced my stator, starter relay, starter motor spent a fortune, turns out it was just the spark plugs 😂. What other bikes have you got man?
@@triple.pistons seeing how the plug Is new and the headgasket is leaking causing low compression I absolutely say its the headgasket. Its a bitch to start cold as well. it's a long list. Xl100, yz426, wr426, yz85, cr80, kx450, yxz1000r, yfz450, trx70, atc70, atc185, atc200x, atc200x, couple China pitbikes, ozark250, and a spree lol. I think that's it.
I don't know if my injectors were just unique.... I was cleaning the injectors on my 2007 Suzuki boulevard c50... but these do not form a good seal around the injector. It kept popping off. I had to duct tape the injectors on to the plastic piece to get it to stay... and it also doesn't form a good seal around the injector cleaner bottle.... It leaked a whole bunch onto my garage floor
Old wives tale! And yes I have much experience with battery maintenance! I KNOW THAT BECAUSE I SELL THEM TOO! HAVE A BATTERY IN MY TRUCK THAT IS 10 YRS. OLD. THE KEY IS FLOAT CHARGING!
@@darylrudick There is no potential between the ground and the plastic case of the battery, therefore by definition it is "floating"...At least that's the physics they teach in college where I attended and became an Engineer....but, if you say so....It works for me..
@@raymondpontremoli4500 U don’t know what he’s talking about ( float charging ) & I don’t have time to explain it to a big shot Engineer like yourself.What caloge did u say u attended anyway ¿
Thanks for info on cleaning kit!!!!!! Got one on order!!!!!! God Bless safe ridin rubber down
Please make the video on how to remove the injectors.
PULL them out of the hole
it can be a different process per bike
Funny video... "How to clean fuel injectors" he decided to turn the camera off when cleaning the injectors so it doesn't show it lmao!
Put A and B together pal
@@willcountypowersports6338 shit video PAL
Great but you never showed it working so not super helpful I'd like to know that it work for you before wasting ten bucks
It’s 10 bucks pal and it works.
Umm. The actual cleaning? Great plug for the kit, but where is the Billy Mayes demonstration?
Thanks, simple and easy 👍
Did it work?
Always does.
You didn't show the cleaning process and if that particular injector cleaner actually cleaned the injector allowing more fuel to flow.
Chasing a no start when hot issue on the 2012 kx450 I just got. Valves are in spec, fuel pump leaks and has a huge glob of weld stick on the bottom. New pump and clean my injector I hope does the trick.
It should!
Replacing your spark plugs will fix this issue!
@@triple.pistons Headgasket is leaking, it's still broken lol. I have lots of other bikes I've been riding and working on this season, no love to the kx yet.
@@danjim7056 you think leaking head gasket is the problem with hot start issue? I replaced my stator, starter relay, starter motor spent a fortune, turns out it was just the spark plugs 😂. What other bikes have you got man?
@@triple.pistons seeing how the plug Is new and the headgasket is leaking causing low compression I absolutely say its the headgasket. Its a bitch to start cold as well. it's a long list. Xl100, yz426, wr426, yz85, cr80, kx450, yxz1000r, yfz450, trx70, atc70, atc185, atc200x, atc200x, couple China pitbikes, ozark250, and a spree lol. I think that's it.
Great so we didn’t see if it worked or not , I thought that was the point of the video .🤔
I don't know if my injectors were just unique.... I was cleaning the injectors on my 2007 Suzuki boulevard c50... but these do not form a good seal around the injector. It kept popping off. I had to duct tape the injectors on to the plastic piece to get it to stay... and it also doesn't form a good seal around the injector cleaner bottle.... It leaked a whole bunch onto my garage floor
How many injectors does the c50t boulevard have.i have an 07
@@txmade4271 me too & about to attempt to clean them,I'm assuming there's 2 but I guess there could be 4..If you find out please let me know.
@@TakeNoShitgang444 what's up brother..my mechanic. Said the c50t only has 2 injectors.
@@txmade4271 Thank you very much..I appreciate it & long live Texas!
@@TakeNoShitgang444 yes sir.where you from
Cool man who did u buy it from?
b13leal eBay
This could have been a 2 minute video.
All that n cut short lol
eBay
One thing,. You should never put a battery on concrete. It kills your battery
No it doesn't....Old wives tail....
The battery doesn't know its sitting on concrete anyway.
Its a wives tale!!
Old wives tale! And yes I have much experience with battery maintenance! I KNOW THAT BECAUSE I SELL THEM TOO! HAVE A BATTERY IN MY TRUCK THAT IS 10 YRS. OLD. THE KEY IS FLOAT CHARGING!
@@darylrudick There is no potential between the ground and the plastic case of the battery, therefore by definition it is "floating"...At least that's the physics they teach in college where I attended and became an Engineer....but, if you say so....It works for me..
@@raymondpontremoli4500 U don’t know what he’s talking about ( float charging ) & I don’t have time to explain it to a big shot Engineer like yourself.What caloge did u say u attended anyway ¿
👍🏽🙏🏽
55 subscribe for your channel
Are you drunk?
Hey thanks for your comment. Loser