Hello, ive been binging Your videos. May I ask what to write in gmdss logbook in any case of urgent/distress messages being received other than weekly/daily/monthly tests. Thank you
Sir thank u for this explanation and informative video. Can u make a video about how to use PI and how to check our position on the radar while using PI lines in constrained waters. Thank u and have a safe voyage.
Hello dear Pawan Haryana, I am wondering how do you act in high range tide present ports and also in case tidal window is required for passage about manual safety contour process. Secondly, do you investigate the chart reliability and sources during that manual safety contour drawings ? Thank you for your post and sharing informations, Best regards
Hello. Tnank you for video. It could be very cool to make video for transit Suez. Practical approach. Also Malacca strait, prohibited anchorage in the East etc.. Thanks for the channel!
Bro if you could make a video which covers rules, regulations and general stuff for vessels intending to transit Suez or Panama canal. Basically, when to give ETA notices and mandatory lights etc. Thanks! ✌️
Hello Sir from a long time we didn't get your video...can u prepare few videos on below topics 1. How to order medicine & Narcotics , their quantity by Ships medical guide 2. From where I will find ECA ,PSSA area & procedure of their marking 3.Explaination of Publication Passage planning guide for Malacca Straits 4. How to order e-book, how to install, how to use online & offline , how to check their new edition & update & order new edition 5. Explanation & demonstration of passage planning sheet by one example 6.& most important topics Noon report, EOSP , COSP report with full explanation with example...Thank u Sir... awaiting for your quick support
Sir if a hydraulic system has 3 feed pumps and 6 powerpacks, how many feed pumps are needed to be on? One is kept always on and then one needs to be started and the third one can be kept closed even when the ship is discharging using all powerpacks? Thank you!
Bro it depends how many cargo pumps u are running if all power pack are running then u can try starting cargo pump as soon as u start more than 4 pump it the system pressure will fall and hence u would need feed pump to help in pressurise the line now it is ship specific
@Atlantian How do you delete plotted positions on FURUNO FMD 3200... ECDIS Chart is full of plotted position while we came in port, now at departure time these positions are causing problem... Please let me know... Tried finding but cannot delete past positions... Do you have any idea?
Brother i like your content, so i suscribe y channel, but i want ask about hw to make local time during ploting wear manual ploting by ecdis transas 4000 thnks i wait yaour answe
If i am approaching buoyed channel in same scenario is it fine to make danger contour line touching buoys as if stating vsl not to go out of buoyed channel
![[ENGSUB] UNPRODUCTIVE DAY ใช้ชีวิต (เปื่อยๆ) ด้วยกัน 1 วัน! | OUROAD CLOSEFRiEND SS2 EP.9](http://i.ytimg.com/vi/pyYKZ3kra9w/mqdefault.jpg)
![30 ชั่วโมงคนเดียว บนรถไฟชั้น 3 โซเวียต [Around The World Ep. 2]](http://i.ytimg.com/vi/MlE9boAVqDA/mqdefault.jpg)
Hello, ive been binging Your videos. May I ask what to write in gmdss logbook in any case of urgent/distress messages being received other than weekly/daily/monthly tests. Thank you
Sir thank u for this explanation and informative video. Can u make a video about how to use PI and how to check our position on the radar while using PI lines in constrained waters. Thank u and have a safe voyage.
Hello dear Pawan Haryana,
I am wondering how do you act in high range tide present ports and also in case tidal window is required for passage about manual safety contour process.
Secondly, do you investigate the chart reliability and sources during that manual safety contour drawings ?
Thank you for your post and sharing informations,
Best regards
Practical and useful content bro!
🏅
Hello. Tnank you for video. It could be very cool to make video for transit Suez. Practical approach. Also Malacca strait, prohibited anchorage in the East etc.. Thanks for the channel!
Hello sir your videos really very informative
can you plz make a video on clearing bearings in transas ecdis
sir thankyou for the video and clear explanation. hope to be like you someday. best regards! from philippines
So nice of you
Bro if you could make a video which covers rules, regulations and general stuff for vessels intending to transit Suez or Panama canal. Basically, when to give ETA notices and mandatory lights etc.
Thanks! ✌️
Hello Sir from a long time we didn't get your video...can u prepare few videos on below topics
1. How to order medicine & Narcotics , their quantity by Ships medical guide
2. From where I will find ECA ,PSSA area & procedure of their marking
3.Explaination of Publication Passage planning guide for Malacca Straits
4. How to order e-book, how to install, how to use online & offline , how to check their new edition & update & order new edition
5. Explanation & demonstration of passage planning sheet by one example
6.& most important topics Noon report, EOSP , COSP report with full explanation with example...Thank u Sir... awaiting for your quick support
Hello. Can you tell me the difference between About points and no return points. How to calculate or Mark at Ecdis
Sir if a hydraulic system has 3 feed pumps and 6 powerpacks, how many feed pumps are needed to be on? One is kept always on and then one needs to be started and the third one can be kept closed even when the ship is discharging using all powerpacks? Thank you!
Bro it depends how many cargo pumps u are running if all power pack are running then u can try starting cargo pump as soon as u start more than 4 pump it the system pressure will fall and hence u would need feed pump to help in pressurise the line now it is ship specific
@@atlantianpawanharyana1005 huge thanks!
Very useful
@Atlantian How do you delete plotted positions on FURUNO FMD 3200... ECDIS
Chart is full of plotted position while we came in port, now at departure time these positions are causing problem...
Please let me know... Tried finding but cannot delete past positions... Do you have any idea?
Damn! I never knew about this 😫 Thanks 🙏
can you post this table that calculates the contours?
Brother i like your content, so i suscribe y channel, but i want ask about hw to make local time during ploting wear manual ploting by ecdis transas 4000 thnks i wait yaour answe
Thanx bro
If i am approaching buoyed channel in same scenario is it fine to make danger contour line touching buoys as if stating vsl not to go out of buoyed channel
Yes yes
Very informative bro
Thankz sir 😅
Bro can you upload the above sheet?
👏👏👏👏
Ye excel sheet mujhe fleet ki jaisi kyu lag rhi h 😂😂😂
Bcz ye fleet ki h
@@atlantianpawanharyana1005 😅 laga hi tha ...
@@atlantianpawanharyana1005 😅 laga hi tha ...
Could you please send me that excel file?
can u share your format xl to my email please..