The problem with the blinking OSD elements (esp with WTFOS) is that the CPU is being overloaded. at times. Apparently an F722 isn't fast enough for BF 4.4 and 4.5 . You will probably only see this is if you are running an 8K PID loop. FCs with the BMI270 will never see the problem. The fix is to use a 4K PID loop or to get a flight controller with an H7 processor. I think the BF devs should make a PSA about this because I think they know.
If you're flying FPV in the same area as the mavic, ask the mavic pilot to change their transmission from Dual Band to 2.4Ghz only, so they dont blast your video system. They'll want to go back to DualBand when they leave you to get full range.
@joshuabardwell Best radio under $150 is not the Pocket. Pocket is the best radio under $65, or $65+60=$125 if you want all metal gimbals...but truly the best radio under $150....and i think you'll agree, is the RadioMaster Boxer ELRS, comes in at only $140. Honerable mention for the Tango 2 right by it at $160. Boxer and Tango 2 are 🏆 for drones ...unless you fly planes and need 16 switches
Problem with C rating is there is not real standard for what it means. One can get low C batteries that perform well, and higher C betteries of the same capacity that perform badly.
C Rating is well defined, the problem is that manufactures don't care about measuring, they're using C Ratings as marketing terms, to tell you how much more you should pay for this battery line vs their other ones and vs their competitors. I refuse to even list C Ratings on my shop, because they're bullshit 😊
4.9 GHz Public Safety Band: Competing Views on Use " For example, although aeronautical use in the band has been restricted due to interference with radio astronomy use, CII operators asked the FCC to permit unmanned aerial vehicles for CII operations and emergency incidents, with interference protections. Citing the need for spectrum for other uses (e.g., intelligent transportation systems, indoor uses, communication-based train control systems, robotics), some questioned whether FirstNet needs additional spectrum." That was just in september 24 2024 that must be what you were talking about. But yeah foxeer is selling a 4.9 "band x" reciever and transmitter set for $200
Wrekd has my T-Shirts for sale too, Joshua Bardwell "You're gonna burn something today" shirts, BreakDrones, BuildCleanFlyDirty, and a whole lot more. I drop new shirts on my site every month 🙌
Potentially all it takes is for someone to make a complaint about you, and for that complaint to be followed up. You dont need to land at the superbowl. Is it likely? No. Is it possible? Yes. Depends on your personal attitude to risk/reward. If remote ID comes here to the UK, as is proposed - much more draconian than yours, anything with a camera regardless of size, and networked as well - that'll be the end for me.
Why you never get a D Sync on a brushed motor because it has a physical commutator that rides on brushes. So they are perfectly timed from the factory BUT they are so dang heavy from this commutator. Because it is a giant copper cylinder that has steel rings and segments of copper and insulation called mica. So it is impossible to make a brushed motor lightweight and efficient. Just food for thought
hi i am haviing issues with my tx or motors. so in bataflight motors spin with th sliders with no issues my tx input is showing on the recever tap. the stick low is set to 1000, ive desabled the arm switch on the tx and also in bata flight, not no responce from drone when using the tx.also remove the failsafe gps rescue plz help i am at a loss now
Not the motors if they're working, and what response are you expecting when you disable the arm switch. Why do that ? Have you configured Rx in Rx Tab. Bardwell has BF playlist that explains it all. Go learn. Good luck.
@redcaoimh3127 no need to be clear is there "go learn" I sure you asked for advice before now? Of course, I looked at loads of his videos, not not finding the answer, hence asking, I am expecting to if I disable the arm switch, it will eliminate an issue with that.
@@bad2thebone244 email JB then, or drop him a superchat next livestream. And no, I haven't asked any questions even though I support those that teach me through Patreon. It's a new language and a steep learning curve - so yes - go learn, as we all do.. continuously. Perhaps you need to set up your Radio's inputs and mixers, then set up the modes tab and configure your Rx. Buona fortuna
@@redcaoimh3127 few issues there the live stream was 16hr ago making it 1:30am i dont have snapshat or his email if you got it i would greatfull for it :)
Aaha ok, so "band L" is 5.3 mhz, and this just happened according to google ai. "5 GHz band The FCC adopted rules in August 2024 to allow licensed drone operations in the 5 GHz spectrum band. The FCC also authorized 555 megahertz of spectrum in the 5150-5350 MHz and the 5470-5825 MHz bands for U-NII devices. "
Hmm I'm not sure, what it references is a thing from 2013 which seems unrelated...and another article talking about the 5000 range... nothing specific that says what its saying.
Dude, the man can't be aware of everything. He did close wth an analysis that was fairly close to the mark. What is wrong with everyone these days, why so angry, smug and unpleasant? I think what you were looking for was. I really enjoyed watching your livestream and thanks for your service.
I love this track!! I would advise strongly against making a statement of fact on something that is a matter of taste.. it is a very egocentric atitude to have.
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
The problem with the blinking OSD elements (esp with WTFOS) is that the CPU is being overloaded. at times. Apparently an F722 isn't fast enough for BF 4.4 and 4.5 . You will probably only see this is if you are running an 8K PID loop. FCs with the BMI270 will never see the problem. The fix is to use a 4K PID loop or to get a flight controller with an H7 processor.
I think the BF devs should make a PSA about this because I think they know.
It begins at 3:22
Thank me later
Thank you, that's the only time stamp I need 👌
If you're flying FPV in the same area as the mavic, ask the mavic pilot to change their transmission from Dual Band to 2.4Ghz only, so they dont blast your video system. They'll want to go back to DualBand when they leave you to get full range.
Whoa, I just got my first relevant TH-cam ad! I was watching your stream and saw an add for an FPV RC Plane! (Doh, forgot the name brand already 😂)
@joshuabardwell Best radio under $150 is not the Pocket. Pocket is the best radio under $65, or $65+60=$125 if you want all metal gimbals...but truly the best radio under $150....and i think you'll agree, is the RadioMaster Boxer ELRS, comes in at only $140. Honerable mention for the Tango 2 right by it at $160. Boxer and Tango 2 are 🏆 for drones ...unless you fly planes and need 16 switches
Problem with C rating is there is not real standard for what it means. One can get low C batteries that perform well, and higher C betteries of the same capacity that perform badly.
C Rating is well defined, the problem is that manufactures don't care about measuring, they're using C Ratings as marketing terms, to tell you how much more you should pay for this battery line vs their other ones and vs their competitors. I refuse to even list C Ratings on my shop, because they're bullshit 😊
4.9 GHz Public Safety Band: Competing Views on Use
" For example, although
aeronautical use in the band has been restricted due to
interference with radio astronomy use, CII operators asked
the FCC to permit unmanned aerial vehicles for CII
operations and emergency incidents, with interference
protections. Citing the need for spectrum for other uses (e.g.,
intelligent transportation systems, indoor uses,
communication-based train control systems, robotics), some
questioned whether FirstNet needs additional spectrum."
That was just in september 24 2024 that must be what you were talking about.
But yeah foxeer is selling a 4.9 "band x" reciever and transmitter set for $200
Wrekd has my T-Shirts for sale too, Joshua Bardwell "You're gonna burn something today" shirts, BreakDrones, BuildCleanFlyDirty, and a whole lot more. I drop new shirts on my site every month 🙌
Potentially all it takes is for someone to make a complaint about you, and for that complaint to be followed up. You dont need to land at the superbowl. Is it likely? No. Is it possible? Yes. Depends on your personal attitude to risk/reward.
If remote ID comes here to the UK, as is proposed - much more draconian than yours, anything with a camera regardless of size, and networked as well - that'll be the end for me.
Why you never get a D Sync on a brushed motor because it has a physical commutator that rides on brushes. So they are perfectly timed from the factory BUT they are so dang heavy from this commutator. Because it is a giant copper cylinder that has steel rings and segments of copper and insulation called mica. So it is impossible to make a brushed motor lightweight and efficient. Just food for thought
hi i am haviing issues with my tx or motors. so in bataflight motors spin with th sliders with no issues my tx input is showing on the recever tap. the stick low is set to 1000, ive desabled the arm switch on the tx and also in bata flight, not no responce from drone when using the tx.also remove the failsafe gps rescue plz help i am at a loss now
Not the motors if they're working, and what response are you expecting when you disable the arm switch. Why do that ? Have you configured Rx in Rx Tab.
Bardwell has BF playlist that explains it all.
Go learn. Good luck.
@redcaoimh3127 no need to be clear is there "go learn" I sure you asked for advice before now? Of course, I looked at loads of his videos, not not finding the answer, hence asking, I am expecting to if I disable the arm switch, it will eliminate an issue with that.
@@bad2thebone244 email JB then, or drop him a superchat next livestream. And no, I haven't asked any questions even though I support those that teach me through Patreon.
It's a new language and a steep learning curve - so yes - go learn, as we all do.. continuously.
Perhaps you need to set up your Radio's inputs and mixers, then set up the modes tab and configure your Rx.
Buona fortuna
@@redcaoimh3127 few issues there the live stream was 16hr ago making it 1:30am i dont have snapshat or his email if you got it i would greatfull for it :)
Email jb@joshuabardwell.com
Unlicensed National Information Infrastructure, so that's us!
1:45:00 maybe his drone exploded too early...before reaching the target ;) :D
"FCC ADOPTS INITIAL RULES FOR ‘DRONE’ OPERATIONS IN THE 5
GHz SPECTRUM BAND" So that's actually 5030-5091 Which would actually be x band.
Aaha ok, so "band L" is 5.3 mhz, and this just happened according to google ai. "5 GHz band
The FCC adopted rules in August 2024 to allow licensed drone operations in the 5 GHz spectrum band. The FCC also authorized 555 megahertz of spectrum in the 5150-5350 MHz and the 5470-5825 MHz bands for U-NII devices. "
Hmm I'm not sure, what it references is a thing from 2013 which seems unrelated...and another article talking about the 5000 range... nothing specific that says what its saying.
fun watchin you flail about a anti spark filter video that you never watched. WATCH THE VIDEO. not a big deal geeeeez. 😅😅😅😅
I'm not taking 15 minutes of livestream time to watch the video. Me flailing is at least entertaining for the viewers.
Dude, the man can't be aware of everything. He did close wth an analysis that was fairly close to the mark.
What is wrong with everyone these days, why so angry, smug and unpleasant?
I think what you were looking for was. I really enjoyed watching your livestream and thanks for your service.
Honestly…..this intro song is horrendous.
It's a banger wym ? (I frl love it)
I love this track!! I would advise strongly against making a statement of fact on something that is a matter of taste.. it is a very egocentric atitude to have.
Fpvcycle shorty motors open prop on a 3.5” 6s build 🤌🏻🤌🏻🤌🏻