Cabover Forgotten in the Jungle. Will It Start???
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- Check out the Ridge Wallet!
ridge.com/BRUCE...
Our New Shirts Are Live On The Website!!!
brucewilsonshop...
SNAPCHAT- afterhourdiesel
INSTAGRAM- bruce_d_wilson
FACEBOOK- BRUCE WILSON
Hit the like button and comment!!!
MY GREAT AND ABSOLUTELY AMAZING SPONSORS DOWN BELOW MAKE SURE TO CHECK THEM OUT!!
INDUSTRIAL INJECTION
Use Coupon code "brucewilson5" at checkout when shopping with Industrial Injection!!!
www.industrial...
4 STATE TRUCKS www.4statetruc...
Randys Transmissions randys-transmi...
FTI Competition Converters
ftiperformance...
Down4soundshop
www.down4sound...
DS18 SOUND AND AUDIO
ds18.com/
CHECK OUT MOVE BUMPERS!
www.movebumper...
SEND ME MAIL!!
12410 US HWY 301
Dade City, Fl 33525
You got to save it. Love the orange and the motors are turned up on most of those house movers
Wylie Tharp and it’s only a single rear axle witch I personally like
@@Definitelynotyou90 Less weight that you can haul though..
jcb19 good point I personally think they look cool but what it was used for it was just pulling with no weight being applied on the rear axle it was perfect
Depending on if Bruce wants to tow or show is the deal breaker in my opinion
@@Definitelynotyou90 Get a box trailer and remodel it into a house trailer to tow behind it.
@Wylie Tharp those short wheel base trucks are cool ,, i have one i made a pickup truck out of ,,mine is a whole lot older , mine was originally a Shag truck used at a truck terminal ,,the truck is a 1976 ford COE , it's shorter than a pickup truck and mine is actually one of the last GAS powered big trucks built ,,i added an 8ft pickup box from the correct model year ford truck and use it to pull my campers even being a class 8 truck it's shorter than a conventional pickup truck , a standard pickup with an 8ft box is 17 feet long ,,mine just 14feet it weighs 8500 pounds about the same as a 4 door 1 ton truck
that's where the comparison stops because i can put 8000 pounds in the box and not come close to being overweight
i can pull 30,000 pounds without exceeding the trucks capability let alone it's limits
same fuel mileage as an average gas powered pickup too , i average 18 on the highway and 13 in town when not towing and about 8 -10 when towing 15000 pounds
the engine i updated , it originally had a 429 FE big block ford, i replaced that with a 1989 model 460 V8 from a motorhome ,it's EFI and also turbocharged , producing 400HP and 560 LB/Ft torque ,,the transmission is a 5 speed eaton side shift and is equipped with a gear vendors OD unit ,,with dual 75 gal gas tanks when i decide to go camping not much gets in my way ,,plus it's easier to park , and shorter than a pickup truck with a better turning radius
I’d get the Pete for temporary hauling then when you get the international done use that to haul your stuff then repair the Pete
I like this idea as well. Get the Pete.
Save them all
Tbh that turbo was screaming and it started up like a champ
@Anthony Dammann . .
🤪🤪🤪😗😛
When I know a truck has a low battery or hasn’t been started in a while I always push the clutch in so it’s not turning all of the gears in transmission takes a little stress off starter so it can get the motor spinning
Jerry Bell 1 word “neutral”
Kyler kemp yes you could put it in neutral but even at that if you don’t push clutch in it’s still turning some gears
@@Basstaco69 the input and counter shaft are still spinning until the clutch is used, so maybe you don't know shit????
Non Typical a
Dennis Olsen there you go input and counter shaft is the word I was lookin for
I’ve got a pile of old Cabovers. We still truck with them, restore them plus take lots of pride in our old trucks. ( The Difference is I actually know what I’m doing) Probably should start my own Channel.
Do it
@BCT W900 would u be interested in selling one contact me at 336 572 0786
@@perfectdipper144 you messed up by putting your number on TH-cam. How many calls have you got?
Yeah why I stoped watching the channel ... And. He start all these but has 2 smh ... He must not make any money at the shop cuznhenhas to do cab over vids . His brother is annoying to
He a idiot. I would fix this it's cool
LOL, that was too easy! That cab is horrible inside, but the rest seems salvageable. Maybe stick the engine and trans. in a nice conventional cab and scrap that boneshaker COE.😉 A lot of good usable parts on there for someone in the mobile home transport biz.😁
This 84 would make a sick drag truck, my uncle ran one just like this back when he got out of high school
Bruce you gotta buy that Peterbilt, not too much work to so on it and people would love it if you were to talk both to a truck show! Loving the videos even in these times, god bless my brother!
You should just get the peterbilt. Also why would they leave the windows open if they were going to let it sit?
i know it was good condition
and it started
He is not going to buy any of them
Yes sear respect
was hopping he would of bought the peterbilt but oh well
I like all the trucks, but i think you should go for the Caterpillar engine because it looked the nicest. Not my choice tho all up to you brother
I’m glad you going to finish the cabover. Also this truck can be used for parts and for what you need right now and then if you feel like it you can fix this cabover up when you have a chance because this cab is very straight and ready to ride again
Turn this into a race truck and start a semi racing series at Freedom Factory..
Jeff burnout rivals build
Absolutely love these old truck videos that you produce. You’re doing a great job, keep up the good work!
Welcome to the jungle we got forgotten things 🎸
Bruce, it even has a driver side step like you’ve been searching for. What condition is the cab latch rail? Could potentially be a good replacement for the damaged one on Buford. Great find, buddy!
Nobody:
Mad Max: I've got a rig that'll haul that tanker!
So do i
That cab is definitely in better shape on the outside.
Barry Owens 🇺🇸Yeah, I liked the cab, too! The first thing I noticed was that it was highlighted with orange panels...didn’t like it at first, but then I noticed that all the panels were rather nice. Kind of a hit N miss spot painting, but not in bad taste. That inside needs a lot of elbow grease and a major encounter with a vacuum! 😳 I bet it would actually make a nice truck.🤩
Get some lumber put a loft in that place. Use every inch your paying for.
It's good to see you going forward on the cabover project!
Might be a good candidate for a cab swap, seems to be a bit straighter. Paint even looks a little better than the white bedliner on the other one :)
Im from Wisconsin.... everything is rusty up here lol will u please find me a Pete cab over project thats not rotten!!! I will come get it!! You find some great things down there!!!
I love how you're waiting for him to say go at 4:24 to start turning you're wrench to tighten up the cables on the trees of the batteries
We like this Will It Start video.
Although Bruce Wilson tries to start this engine. It engine succeeded. We should call Hamiltonville Farm to hauling this cabover.
Man wish we could see the original cab over get done! I know your excited for new projects but us as viewers want to see what has already been started! The cabover is what brought me to you channel to begin with and I'm sure that's the truth for many other on here!!
The Freightliner cuz it's different from the other's you don't see him that often especially cabovers
What you mean I see them all day every day and most are cab over
Cost way too much, by the time you drop that little detroit turd off at the dump where it belongs and find a new engine you might as well just buy the Pete.
@@bobbob-fg5wy this is a cummins engine lol
@@III1IlIIlIllIl Correct, I am not talking about this truck, I am talking about the freightliner that he bought instead of buying this for parts for the international or buying the peterbilt. See the first guys comment, thats what I was replying to, the Freightliner which has a detroit.
"A fool and his money soon go separate ways" Truer words, truer words... I saw runners driven to Macungie from N.C. last year for 6-8k, same at ATHS. Seems like he's starting an amateur junkyard.
Can't wait for another cab over
Part 2
Your world ethic is unmatched. Very inspiring to say the least and Lakeland my hometown nice to see.
going for round two? still nice to have a parts truck. what kind of shop did you rent that you needed and they let you run power lights ect in?
I like the concept of a shop and a man cave together great job 👍👍👍👏👏
This sound of turbo remind me a MAN F2000 19.422 we had when i was 12 years old and we carried tomatoes to an industry in North Greece!
422 MAN is not a F2000 😉.Its a F90
I’m glad this channel is starting to kick off you have worked every hard for it Bruce
I Love the Cabover trucks man! Growing up in the 80s was a great time for me. Loved seeing the Cabover's all over the place back in the day while going on road trips with my parents!
With that wheel base that single drive would do sick donuts, plus you could tow a 5th wheeler on holidays at full noise up and down hill so cool😎
Morning Bruce, my name is David. I actually do the job that truck did. Some of the parts can be resold if in decent condition. The mirror bars are around 2 grand If they're electric. Same with the hydraulic hitch.
You should get the freight liner truck it looks neat and it doesn't seem like it needs a ton of work
Don't worry about that low flow cooling system my cabover has it and I never had a problem with it, in fact I think the truck runs cooler than most.
Bruce to the rescue again. Great job!
Unbelievable it started that easily. Sounds really good also. Good job guys.
Nice bro the cab looks very tidy on the outside
Nice Video 👍 💚
9670 hard to beat. Drove one of the first in Hillsborough county. Had three new ones with company drove for. 84 now, miss the road. 🐻
Thats awesome as always Bruce. the Peterbilt was an awesome find man. The other is gonna look nice too when your done with it.
Get the vacuum and respirators ready!🧐 It sure looks nice on the outside and actually sounded pretty nice! Looking forward to the next video! 🤩 Stay safe!
Can't never have enough parts can't wait to see the cab over done
All your work for the startup looked just like a state job,.... 1 person working like crayzee and 5 watching....I mean "Supervising" 😁👍
It's in better condition than some I see on the roads driving right now 😍😍😍😍
I can't believe you just jumped in and started that engine being down for two years without even checking the fluids, mostly importantly, the oil. I drove truck for over 40 years and in all that time never started a diesel until I check everything over. I guess that's just the way the new generation does it now, right? Can't wait to see more of how you work.
Was skipping a video and accidentally clicked this. But that’s fine. It’s Bruce that I’m watching now.
Out of all the trucks you looked at, the PeterBuilt 362 15 Speed Caterpillar 3406 would be a nice addition to your fleet. It's a beautiful looking truck. Would need the least amount of money and work to get it back on the road. In the new workshop. Why not fit a mezzanine floor at the bottom half for storing all the parts and stuff. And under neath you would have bays for stand drills, lathes and milling machines.
What a cool video! Please make all of your start up videos like this, with the door open so we can see the full procedure like that... it was amazing. Subscribed!!
Never thought my family’s property would be considered a jungle haha Harry is a good man. This was cool to watch.
Gotta love the sound of a straight turbo.
Bruce wants a socket and a 9/16ths 🤣🤣 love it!!
Would make a nice looking flatbed. Tool boxes down the sides, speakers.
Hey Bruce, Chris the Trucker here.
Hey brother, I've got 30plus yrs of truckin under me. I live in Indiana, but run CoVid-19 loads to Miami weekly, driving past ur place.
Would love to stop by sometime to say hey. If nothing else, would enjoy helping u out in any means possible.
Love the channel. Keep the vids comin.
P.s., next time Garret goes to Mich, or Glamor CA to ride the dunes, u should take flatty out with a set of paddle tires on it.
That would be awesome.
GLAD YOU ARE MAKING VIDEOS LIKE THIS!!! KEEP IT UP!!!
Buy it Bruce..a running and working truck! Haul boats, trailers and flat ñ nasty !
Man I’d love to have that old cabover it’s my birth year an love to Restore it
Buy it. .you want it? Make it happen bro! A project for your future!
Awesome to see you back to business thanks for sharing buddy keep up the great work and videos buddy 👍🏻😎😎😎👍🏻👍🏻👍🏻
😌 nothing like the beautiful sound of an old Big Cam Cummins....
Love those 9670's! I had an '82 with a Big Cam 300 10spd pulled flatbed back in late 80's early 90's miss it lol
Bruce how bout the info on the cabover that was road ready jus needed tires?
Just an idea for when you get it back to the shop if you’re going get it ready for over the road put a lift up axle on the back which would make it more manoeuvrable and save tyres when empty.
I seen one of those for sale the same year, drive line and everything. Looks like it came from the Bock factory in South Bend Indiana. Maybe wrong but it looks like their work. Anyway that truck I seen for sales wasn't pretty but it was ready to work. $7500. I thought it would be cool to deliver tiny houses.
Love them Cabover s. Excellent video
Need a door connecting the two shops - also with all that height you may want to put up a hoist to lift engines and what not.
The best question is will the Peterbilt or Freightliner compliment and go with the International? The Peterbilt looks like a hauler that will work hard all day on the highways with the extra gears & potentially working A/C, but she does look the rougher of the two (both in body & interior). The Freighliners body looks easier to get ready for a photoshoot next to the International, and has the extended frame you were previously looking for and a PTO. It's interior also looks like it needs less work, not perfect but further along to be back on the job.
The CAT is the same sort of animal as the Cummins, so you already know what to do to get where you want with it. The Detroit, will give you a different feeling giving a greater difference to the International, more challenges but also greater chance to learn something new.
But since one of these will be a worker without much contend done on it once she's up and running, the other question is will it turn into a later project or be sold so as no to take up too much space?
As a later project if you get the Freightliner, see if you can retrofit the swing out stairs of the Argosy. No real point to this other than making it really easy to get in or out.
What's better than having 1 Cornbinder? Having 2 of them!
Loving these videos Bruce! Thanks for giving us some great content. Where’s your brother? You can’t leave him out of it.
I can't wait for you to chop down the school bus and make it a mini rv/bug out bus! That's the one I want!
um the school bus was sold
Glad to see you back to recording videos again regularly Bruce👍
Yesss i miss the will it start videos glad to see theres another one out
SEE THIS IS THE STUFF I MISS ON THE SHOW!!even If this one was easy lol
Man, these old International cabovers are so cooool. I want one but i could never afford one.
Hi, i like the International cabover very much, you should have it! For me the International are more beautiful than others.....
Good luck!
My grandpa had one of those that he used to move mobile homes as well. But the sad part is that they started to drag them out of the woods and sell them for scrap along with an old Mack R series and a freightliner cabover that looks kinda like blue collar and a international s series that could’ve made a cool custom pickup truck
You should definitely go with the Pete with the cat
Definitely need to but some pallet racking or mezzanine to make a 2nd floor in the storage spot. Utilize the air space above you
I vote for the freightliner. Peteebuilt was sick but needs more work. Plus you don’t see those old freightliners around very often.
The paint on this one looks better than the other cabover lol
Thank you for putting these videos out during qurientene
Keep doing your thing man, I am in South Florida. I am in to collect old Cabovers as well. We need to Talk. I am just starting out with my Collection.
Save that poor cabover id hate to see an international used for parts. They are rare
seems a shame.
Yeah i agree especially because it's a older model from when internationals departements where a little more united pluss whith the IH logo, i'd say that makes that a little more rare and waluable. plusss it was a limited time when they put on the IH logo on their trucks.
Very sad 😞
This has a cummins engine btw
Your videos are getting better and better here in Brazil Minas Gerais now at 0:39 in the morning.
Thank You for putting the flag up in your shop ...
Put you a nice e z loader trailer behind that IH and use it for hauling all your projects and toys any where. Cheers from Jax
Bruce buy the Peterbilt 362 already man its such a nice truck don't miss out on it!
I'd love to have a single screw cabover like that man
The Peterbilt is the truck to go with. That International is a parts truck for sure.
Damn it fired right up without any issues
I think you should totally get the freightliner cabover because it’s a good start
Runs pretty good but I would walk away buddy. If your planning on using it I would recommend a double screw so you can carry more weight.
This truckee looks awesome refurbish 🤗👨🔧
Sitting since December of 2018. That’s only 16 months. It better start!
Man!!! She started right up!
I personally think this is the coolest
I grew up in South Florida and a good freind of my Fathers who was a JackmOf All Trades and could build / Fabricate almost anything under the Sun and was also a great big Man in size and strength. had at one time in his life became a Repo Man that specialized in Repo of Mobile Homes he had a lot of crazy stories of people running out of their house with guns threatening to kill him apparently he had constructed a hydraulically operated hitch on his truck that allowed him to quickly and quietly adjust his hitch to snatch one really fast i was surprised because he never carried his own Firearm during those years but preferred to reason with the people this Man was one of the Strongest people i’ve everkown in my life and his hands were Gigantic in size he truly had a gift for being capable of building some of the neatest and fastest Hot Rods of the day
Parts truck for sure, cant wait to see more on the cab over
4:39 sounds like the minecraft sound for climbing a ladder lol