PID Autotune Tuning Your Hotend and Bed Plate - Calibrating your 3D printer Part 2 - Ender 3 V2
ฝัง
- เผยแพร่เมื่อ 23 พ.ย. 2020
- This video is part of a series of 10 videos that go through how to properly calibrate your 3D Printer, the videos include:
Calibrating Your 3D Printer Overview
Part 1: Frame Check
Part 2: PID Autotune
Part 3: First Layer (Advanced Bed-leveling)
Part 4: Baseline Calibration Cube Print
Part 5: E-Steps Calibration
Part 6: Slicer Flow Calibration
Part 7: Retraction Calibration
Part 8: Temperature Tuning
Part 9: Acceleration Tuning
Here is the link to Teaching Tech's Overview:
• 3D printer calibration...
Huge credit to Teaching Tech for making the following website which is one of the best guides I have seen to calibrating your 3D printer step by step. This video is part of a series of videos going through each step of that process. Here is the link to the website:
teachingtechyt.github.io/cali...
Check out the playlist below to watch the other videos in this series:
Calibrating your 3D printer
• Calibrating your 3D pr...
Gonna get my shit together and do this soon, just got my ender 3v2 and its up and printing decent so i havent let it stop long enough to follow your series to really tune it up. Great content
Mine came out of the box and did decent as well. When I failed on my 16 hour print that's when I decided to go all in and tune up everything. It has worked incredible since then, I rarely have any issues printing. Thanks and I am working on some new content as well just been getting my time lapse better with octolapse it's pretty sweet.
'Automagically' what a great word!
One of my favorites!
Thank you so much for this video.
No problem!
You could add in the future your link to the video on how to download and install the program... I had to read comments to find out that you have a video on how to do that...
Thanks for the vid. But to remove any confusion for new users...should we insert the sd card to our pc or printer for the saving to occur? Might be straight forward to many users here but for me, Im abit lost lol
Hi my CR-10 older version I put a creality spider 4.0 on it and when I try to PID Tune it only gets to 134c then I get the E1 alarm and printerface says error printer halted kill0 called.? What is going on I have no clue and am a total newb to this please help
Hello, I have an ender 3 my bed temp keeps going up and wont stop, I replaced the board main board replaced the hot bed thermistor and its working.. The voltage going to the heating element for the bed keeps going there is no way to stop it on a set temp. I have also done a PID and everytime I try to do it for the bed i get PID Autotune failed! Temperature too high
echo:Unknown command: "05". Any suggestions?
After i click connect , it appears Connecting ... and nothing is happening .
My printer is an ORTUR Obsidian ... What can i do ?
Hi, Im having a problem this endless loop. any idea on how to solve my problem please.
Echo busy paused for user
ECho busy paused for user
ECho busy paused for user
Mine just works for a few minutes then the test gets stuck at 200c forever even though once it does this the tip starts cooling down
I have a cr-10 v3 but I tried every thing but when i start the printer .. it gives 62 degrees bed temperature even when its 19 degrees .. en 51 nozzle temperature .. it wil not go lower ...
Chek the bed or extruder power chek your voltage and current available in you ramps
After the "M303 E0 S200 U1" Code
Pronterface sends message "echo: busy: Paused for user"
Not sure what it means and not sure if it understands any code I sends after, since it repeats that message forever till i disconnect.
I think i may saved the command but not 100% sure it did.
If anyone know anything about that let me know
Thanks
For my Ender 5 its waiting for you to push the dial in on the machine.
MDI is not "machine data interface", its "manual data input."
In pronterface in the port drop down menu it isn't showing anything its just blank, my printer is turned on and connected to the laptop via USB cable, any ideas why nothing is showing?
I have had this happen before, I had to move around ports and sometimes cycle power on the pc and or printer.
You might also try this link for drivers: support.th3dstudio.com/hc/en-us/articles/360043291432
@@rainmaker3d spot on thank you 😊 it was the driver. I've replaced my glass bed as it was warped with a magnetic one, so I'm working my way through your videos to fine tune the printer now 😁😁
@@kevinwells5802 Awesome! Thanks for watching, happy printing!
Thanks for the 4 character wide info screen... you aren't printing anything so why make the BED 95% of the screen?
anyone else having issues having the computer see the printer? every time i connect it, i get a error and cannot find a way to fix it or even a driver online any thoughts?
found the solution in the install video.
I had the same temperture hold error my termistor was broken and the hotbad in rong voltage ( check power)
How do I connect my printer to my laptop? Badly need to tune ng ender 3 v2 :
I've got a video on how to download and install Pronterface on your pc, I would check that out.
@@rainmaker3d oohhh thank you
I don't have a degree in computer science so I guess I'll just be buying a new printer...
when running the M303 E-1 S60 U1 command on my ender 3 it returns PID Autotune failed! Bad extruder number what would cause this?
My students had this same issue on a base ender 3. For some reason this command does not work on an Ender 3 but will on a V2 I would just move on to the next calibration steps. That is what they did and their printers work good now, the bed is not as critical to tune as the hot end.
@@rainmaker3d just wanted to give it a go due to constantly getting thermal runaway on the bed. do you know of any way of fixing that?
@@adrenalinejunkie6797 as of right now I don't. I start teaching my cnc course again tomorrow so I will work with my students on a fix. If we come up with one I will let you know.
You get this error because pidtempbed is not enabled in your firmware.
@@benjicollins1 same problem... pidtempbed is enabled also please help