My Voron V0 3D Printer Reborn!

I rebuilt and upgraded my Voron V0 3D Printer to the latest V0.2 r2 version. Was it worth it?
FYSETC CNC Machined aluminum parts - Various vendors on Aliexpress
Voron0.2 2.8 Waveshare Display - mods.vorondesi...
Klicky Probe - mods.vorondesi...
CAN Bus - github.com/roo... and wiki.kb-3d.com...
Rear, upper bowden inlet - www.printables...
Raspberry Pi camera - mods.vorondesi...
RGB Holder STL - github.com/Vor...
RGB Setup - • Klipper Advanced LED c...
#3dprinting #davebuildstuff #designbydave #voron #3dprinter #v02 #v0.2

[@greengohm]

Another great video and (re)build! Subscribed! Duh!

[@designbydave]

Thanks for subbing

[@williamanthony7224]

Next time you take the belts off a fully recommend the AB double sheer mounts, why it’s not standard on all I have no idea

[@designbydave]

Oh cool thanks for the tip. That looks like a much better mechanical design!

[@radiotbo4646]

great video!!

[@designbydave]

Thank you!!

[@matrixfire]

Can I get the STLs for your remix of the Bowden back panel. Thanks

[@designbydave]

Yeah, I should have put that up on Printables before - www.printables.com/model/855267-rotating-mod-v0-upper-rear-bowden-inlet-urbi-for-v

[@JATdesign]

Im assuming you still have the old 0.1 electronics in this machine? Trying to figure ou thow to get the waveshare 2.8 hooked up to the new catalyst board, It uses a different DSI port so the same 2.8 i have on my 0.1 doesnt work plug and play with the catalyst board the fysetc R1 kit has

[@designbydave]

No, I changed to the stock V0.2 configuration.
I'm not familiar with those boards, but I did have a hard time getting the display to work as well.

[@dog2bert]

Did you find that the eSun ABS+ wasn't very good in the end? Did you reprint with different ABS?

[@designbydave]

It has been a long time since I printed the original parts so I don't recall what they were printed with. I think the parts that failed were ASA. I replaced most of the printed parts with the CNC machined aluminum part and definitely think that is worth the upgrade.
I did re-print the parts for the toolhead though. Those were printed in 3DXTech CarbonX EzPC

[@dog2bert]

@@designbydave 2 minute mark you said eSun ABS+ th-cam.com/video/rCdsNLdoFZU/w-d-xo.html

[@jetblackstar]

I'm told the 2.4 is far less fiddly to assemble.

[@designbydave]

I can see that being the case. It's larger so at the very least you are working with larger fasteners as well as there just generally being more room to work.

[@Scott_By_Scott]

Id buy a bamboo and a fire extinguisher.

[@designbydave]

11/10