It is just behind the alternator on the left side of the block. Usually seized up but you can get a spanner and remove the whole tap. Often the drilling connecting the tap to the water passages is blocked with sediment, you will need a long thin drill to clear the passage way as its about 3 inch long!
"Mr Charnleys tools have got a bit worn" You aren't kidding Rick, 3 years on from your video, and they are even worse now, the disparity between slot and key is quite large now.
Hydraulic pumps fail because the bearings wear and the gears cut into the housing, therefore they can not be rebuilt. Buy a second hand pump or a new one.
Listen you nuffy's if your impeller shaft is loose it would've been making a rattling noise and the bearings have been watered the grease is gone sure you could get your Uncle around to grease the bearings to "put some good grease in it" dammit get a reconditioned pump...
just to say your videos are fantastic,i have a Nuffield universal 3dl and look forward to new videos
Thank you very much man! This helped me soooo much on my Nuffield
Like your videos. '10/60 and 460
Ur an absolute legend 👍 thanks so much x lucy
queria saber qual o oleo para caixa e hidraulico
Hi again just woundered how do u drain water from engine/radiator on a leyland 272 as Carnt find anywhere? As need add anti freeze, thanks again Lucy
It is just behind the alternator on the left side of the block. Usually seized up but you can get a spanner and remove the whole tap. Often the drilling connecting the tap to the water passages is blocked with sediment, you will need a long thin drill to clear the passage way as its about 3 inch long!
"Mr Charnleys tools have got a bit worn" You aren't kidding Rick, 3 years on from your video, and they are even worse now, the disparity between slot and key is quite large now.
how long is the impeller shaft? mine broke on me hard time finding parts in Ontario, Canada
4.333 inches step to step. Other length measurements are irrelevant.
Hi Rick. Is there any chance of you doing a video of a 272h power steering pump rebuild?
Hydraulic pumps fail because the bearings wear and the gears cut into the housing, therefore they can not be rebuilt. Buy a second hand pump or a new one.
montegoson where could I find a new one?
Brandon Bond www.Charnlys.com
Where can I get a rebuild kit from?
www.charnleys.com/part/nuffield/1/nuffield-water-pump-kit-major
www.charnleys.com/part/nuffield/amk2806-a/nuffield-water-pump
There's no water pump for the tractor.
I don’t understand your comment?
Hello my friend I write by an Arabic to English translator I can not read English please help from you and thank you
I'm following your program with precision.
😊google translate makes some amusing comments.
Listen you nuffy's if your impeller shaft is loose it would've been making a rattling noise and the bearings have been watered the grease is gone sure you could get your Uncle around to grease the bearings to "put some good grease in it" dammit get a reconditioned pump...
therickyard@aol.com