This is another example of Shadow banning because we are not a bunch of hugging touchy-feely spunk trumpets. Therefore folk should reset their notifications and set to 'All Notifications' Do Well 😎
That Ferguson is Minty. I find it interesting the different terms between Britain & Canada, such as the lift pump as you call it, we call it a primary fuel pump. I always learn something watching the channel.
Especially when you're working from an American service/workshop manual, and some of the terms don't seem to make any sense. But I suppose that's Americans for you!
Good evening your Lordship, I have thoroughly enjoyed watching this weeks video about how to rebuild the fuel system on the little grey Ferguson and it was really nice to see your glamorous assistant helping you with this task and I would also like to say how much I enjoy seeing those film 🎥 clips as they make me laugh so much. However your videos Mucker are NEVER dull or uninteresting but are really worth taking the time to watch as anyone can learn something new and interesting from them and I for one cannot wait to see the next one and I am really glad that you and your friend Matt(not sure if that’s his name) have decided to restore Matador NUMBER 37 and that will be something that I will enjoy watching and until next time TaRa for a bit.
I liked that starting lever on the Fergie I had. I always shouted "Contact!" because it sounded like a WW1 biplane starting. 😄 Excellent work, Lord Muck! She's running like new! 🚜
I like the idea of the starter being on the gesrshift, so many farmers stand beside the tractor to start it like you did, having it so the shifter is in neutral before you can push it forward to start is a great safety idea
Very nice to seeing you guys again! Also interesting step-by-step overhaul jobs too. Looking forward to seeing the next video soon. Be nice to meet up with you and George. Fenland Rob
Id have to say the 8100 be for me! I am overjoyed to see the QUEEN back in the works again! Bless her sweet smile! Hope i could be fortunate enough to meet and spend some time with you and her! Keep up the awesome work and video. Yes for sure be on the no. 37!!!
My mate has a grey fergy it hadn't been going for atleast 10 years he wanted to knock the shed it was in down so pulled it out and got him to pull me up the lane put it in top gear let the clutch off and it fired straight away didn't even change the fuel real nice sounding engine have you watched Clarksons farm it's gone down real well with the farmers I've spoken to around here?
It’s always made me smile using the gearstick to start our old grey fergy, a key seems boring 🤣. Sounds like a good day out for someone with you, Saunders and the fleet 👍
Nice to see that wee fergie again, always fancied one as a bit of a project because they’re just so simple. Your videos are consistently interesting and entertaining unlike a lot of content out here. Great video mucker👍
Welldone Buh you nailed it again ,you know I work away sometimes and when I get home and have done all I have todo I get my old laptop out and love watching your videos and Georges some how they make all this lockdown (and here in Austria we are still in lockdown) a bit more easy to handel so please keep them coming both of you and thankyou for all your time to you take to make are lives a little happyer. John a Suffolk farm boy in Austria
Little Fergie runs sweet as a nut now, starts so well that one, I have had a few TEF's and some are are a real pig to get going others no bother! Great idea having a day to have a go with some of your kit, looking forward to see how to get in the running.
After the safety switch on the gear levers went on our Ford 4600 we wired a push button switch that was on only while pressed and fitted it via preexisting holes to the clutch pedal with a bolt to operate it when the pedal was depressed. Worked well when kids tried to start it
Old fergie sounds well. Ours has a button on side of gear box you have to press in before you can select start position. Looking forward to seeing matodor vids👍
The Fergie sounds sweet squire. Kim has done a great job as instructor and mentor and made sure you get your hands dirty for a change. I doff my cap to you both from sunny but breezy North Yorkshire!
Fergie sounds Sweet as a nut again, lovely throttle response! Quite a bit of Jurassic deposit in that lift pump. Great seeing Kimberly use the adjustable hammer for the intake and exhaust manifold. I'll try and watch some more of George's video's 🤣 Keep up al the great stuff you're doing!
Great to see the little Fergie getting sorted. It seems as though you have disabled the switch on the side of the gearbox. It used to be a right faff pushing it with your heel while trying to get the gear lever in the right spot for it to start
Nobody is born with skills, they come through doing things and most of all through screwing things up royally and having no choice but to fix them again with whatever you have to hand. You can do it if you want. 40% common sense, 40% knowledge and 40% pressure that you have got to fix it whatever. Get yourself out there and don't be afraid of making mistakes. Anybody who says that they have never made a mistake had either lied or never done anything at all. Maybe me and his lordship will do a video talking about some of the terrible mistakes we have made over the years. But then again, maybe not, some of the people involved are still alive with access to lawyers!
The first time I had to drive an old Fergie I thought the owner was winding me up when he told me I had to use the gear stick to start it until he showed me 🤣
Awesome you could get parts for the pump. I remember selling my old BMW R69s when the factory stopped supporting the old beauties. After awhile, it just became a rich man's endeavor. Sad.
I suppose for it's time, the start position on the stick was a good safety feature, as a lot of folk would have come straight from horses. So little training for making sure it was in neutral prior to starting and possibly saved a few people's lives!
Remember to put some oil in the czm box of the injector pump. Also drain the rubbish if there is any in the bottom. Also at the rear side if some of these old inline pumps there are filters in the housing like wadding. It is sometimes behind the pump so you might need to take it off the clean it.
First of all awesome video I’ve been wondering how you guys doing and somehow I’ve been missing your videos be safe out there can’t wait for the next one
Love from America. I also have a diesel tractor with a system full of "shite." Its funny how often I call my tractor and other things that same expression.
A simple lift pump & clean fuel system. Kinda basic, but the dividends are golden and nearly always neglected. Love it when old girls fire up at a touch....tractors man... I'm talkin' tractors!
Great vid mucker, by the way had to get the cosby laughing gas out on a cat d4 that was stuck on my lorry, bloody typical always starts 1st time , anyway the look on the customers face was priceless, had to laugh when she roared into life. 🙃😁
Interesting vid👍didn’t realise fergie need to start that way. Ever seen Australian International 86 series like our 786 it has no foot throttle but hand throttle very tricky changing gear at right revs. But Ford made most tricky gearbox Rubik cube, definitely one any tractor fan.
I'll be honest with you I love tractors but I would give anything to go up in the air with you and a p-51 c mustang those planes are just so beautiful and you're lucky asses got to fly em flucker
Good video Kurt👍 wonder how many men are hungerin to have Kim as their other half to do all their mechanical engineering work for them 🤔😂 reckon one o your clips inserted in the video gonna put u on the packham black list 👍🤣🤣 never noticed was that TEF fitted with the decompression lever🤔
I remember when I was young we had a old fergy like that Dad sold it on to much wrong with it would cost to much to fix be good if you could talk Mat in to bring one of his machines as well as you two wil mid Wales
@@LordMuck Bahco is pretty good tools. Part of snap on or it’s part of bahco not sure. Snapon is famously known for its rape van thanks to AVE 😂 Our canadian comedian entertainer and engineer maybe 🤔
the gearlever starting on the Fergies was a thing Harry Ferguson himself wanted on the tractors. he dident want any children and adults for that matter, to be able to start the tractor in gear and run them selfs over.
You haven't shown up in my notifications for a few weeks. I'm blaming youtubes algorithm for this travesty. ........ Be well and stay safe. Can I have a go in the tf. Please.
![[UNCUT]"ตุลามรณะ"ย้อนฟังคำทำนาย หมอดูทุกสาย ดวงเมืองร้อน (หมอปลาย ฟองสนาน อ.โอเล่)I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/lE5az5VvT9M/mqdefault.jpg)
Well screw youtube they switched off notifications for this channel and a few others and thought it had been a couple weeks since I last seen a video
This is another example of Shadow banning because we are not a bunch of hugging touchy-feely spunk trumpets.
Therefore folk should reset their notifications and set to 'All Notifications'
Do Well 😎
I thought Muck had been a bit slack on videos and then found I was unsubscribed, YT really are a bunch of useless tossers.
Was nice to see Calamity Kim back with the tools
That Ferguson is Minty. I find it interesting the different terms between Britain & Canada, such as the lift pump as you call it, we call it a primary fuel pump. I always learn something watching the channel.
Same here ! it's great finding out different terms and names
Especially when you're working from an American service/workshop manual, and some of the terms don't seem to make any sense.
But I suppose that's Americans for you!
Sludge n dinosaur spaff. Can’t get a better thumbnail than that 😂
You're 100% right. When you're looking for a problem and find one its one of the best feelings haha
so nice to see kim again need more kim time with the lord imself
Good video. Nice to see how a few jobs make so much difference to the old girl. 👍
Good evening your Lordship, I have thoroughly enjoyed watching this weeks video about how to rebuild the fuel system on the little grey Ferguson and it was really nice to see your glamorous assistant helping you with this task and I would also like to say how much I enjoy seeing those film 🎥 clips as they make me laugh so much.
However your videos Mucker are NEVER dull or uninteresting but are really worth taking the time to watch as anyone can learn something new and interesting from them and I for one cannot wait to see the next one and I am really glad that you and your friend Matt(not sure if that’s his name) have decided to restore Matador NUMBER 37 and that will be something that I will enjoy watching and until next time TaRa for a bit.
Just can’t wait for the next lord muck video, just keeps getting better & better !👍👍👍
What a great idea you and George have come up with🙂
I liked that starting lever on the Fergie I had. I always shouted "Contact!" because it sounded like a WW1 biplane starting. 😄 Excellent work, Lord Muck! She's running like new! 🚜
Very good. Nice to see you giving the ferguson some love, it's got the making of a solid little worker for round the farm.
Cool informative video thanks for sharing another wee tractor saved from the scrapman good worthwhile project keep up the good work 👍
I like the idea of the starter being on the gesrshift, so many farmers stand beside the tractor to start it like you did, having it so the shifter is in neutral before you can push it forward to start is a great safety idea
Very nice to seeing you guys again! Also interesting step-by-step overhaul jobs too. Looking forward to seeing the next video soon. Be nice to meet up with you and George. Fenland Rob
Id have to say the 8100 be for me! I am overjoyed to see the QUEEN back in the works again! Bless her sweet smile! Hope i could be fortunate enough to meet and spend some time with you and her! Keep up the awesome work and video. Yes for sure be on the no. 37!!!
My mate has a grey fergy it hadn't been going for atleast 10 years he wanted to knock the shed it was in down so pulled it out and got him to pull me up the lane put it in top gear let the clutch off and it fired straight away didn't even change the fuel real nice sounding engine have you watched Clarksons farm it's gone down real well with the farmers I've spoken to around here?
Great vid nice to hear the fergi running sweet , think you should get Kim to go on your day with you and George too 👍😁
When I was a kid in Ireland we had a TVO 20 and the neighbors had a diesel that engine reminds me of those times thank you for the videos
It’s always made me smile using the gearstick to start our old grey fergy, a key seems boring 🤣. Sounds like a good day out for someone with you, Saunders and the fleet 👍
Really enjoyed this film, it must be very satisfying to go through and replace and restore the parts and get that engine to run that sweet.
Nice to see that wee fergie again, always fancied one as a bit of a project because they’re just so simple. Your videos are consistently interesting and entertaining unlike a lot of content out here. Great video mucker👍
I did wonder why you were using the gear stick to start it! Learn something new every day.
Welldone Buh you nailed it again ,you know I work away sometimes and when I get home and have done all I have todo I get my old laptop out and love watching your videos and Georges some how they make all this lockdown (and here in Austria we are still in lockdown) a bit more easy to handel so please keep them coming both of you and thankyou for all your time to you take to make are lives a little happyer. John a Suffolk farm boy in Austria
Our pleasure 😉
Certainly looking forward to some Matador videos. Lovely things!!
Good to see Kim back love the video very informative as not that great on the spanners Simon
Thanks Kurt cracking vid as always.. Take care sir..
Cheers Kev 👍
Great stuff , interesting way to start a tractor. We learn something new everyday day.
Little Fergie runs sweet as a nut now, starts so well that one, I have had a few TEF's and some are are a real pig to get going others no bother! Great idea having a day to have a go with some of your kit, looking forward to see how to get in the running.
what a brilliant thing to do is invite some of your viewers down to meet u and george i for one think thats an epic idea
After the safety switch on the gear levers went on our Ford 4600 we wired a push button switch that was on only while pressed and fitted it via preexisting holes to the clutch pedal with a bolt to operate it when the pedal was depressed.
Worked well when kids tried to start it
Old fergie sounds well. Ours has a button on side of gear box you have to press in before you can select start position. Looking forward to seeing matodor vids👍
The Fergie sounds sweet squire. Kim has done a great job as instructor and mentor and made sure you get your hands dirty for a change.
I doff my cap to you both from sunny but breezy North Yorkshire!
Wee Ferguson sounds a lot better than before. Sounds good to me am quite enjoying watching yourself and George but still waiting on my chip's 😂👍👌
Thank you lord Muck .That ferried of yours sounds nice .
Great video Kurt. Exciting times ahead!
Sweet running ferguson can't beat them get yourself a matching plough and go work it ,looking forward to seeing the matador.
Fergie sounds Sweet as a nut again, lovely throttle response! Quite a bit of Jurassic deposit in that lift pump. Great seeing Kimberly use the adjustable hammer for the intake and exhaust manifold.
I'll try and watch some more of George's video's 🤣
Keep up al the great stuff you're doing!
another lovely video, im actually going though one of these presently, exact same issue, thanks again
Great video mucka nice to see Kim back. Look forward to next video 👍🏻
Started without using ether! Disappointed not to hear that super knock lol.
Great content on the little fergie, nice work on the fuel system. 👌
Great to see the little Fergie getting sorted. It seems as though you have disabled the switch on the side of the gearbox. It used to be a right faff pushing it with your heel while trying to get the gear lever in the right spot for it to start
Yes it's jammed in tight.
Lord my man I could watch you all day wish I had your skill I would love to work on tractors like you do no such luck keep up the great videos my lord
Nobody is born with skills, they come through doing things and most of all through screwing things up royally and having no choice but to fix them again with whatever you have to hand. You can do it if you want. 40% common sense, 40% knowledge and 40% pressure that you have got to fix it whatever.
Get yourself out there and don't be afraid of making mistakes. Anybody who says that they have never made a mistake had either lied or never done anything at all.
Maybe me and his lordship will do a video talking about some of the terrible mistakes we have made over the years. But then again, maybe not, some of the people involved are still alive with access to lawyers!
Nice little runner , sounds real good . Love the video .
The first time I had to drive an old Fergie I thought the owner was winding me up when he told me I had to use the gear stick to start it until he showed me 🤣
great information thank you regards from Australia
hard to nic that shifter start tractor thats neat old school stuff. thanks for the great info. cheers guys.
I see you made an appearance on pegs channel!! What a treat !! MINT 👌
What a fucking treat 👌🏼
Can't beat a bit of dinosaur spaff
Depends where I guess. I'm not a big fan of dinosaur or any other type in my Rice Krispies for example, but each to his or her own.
Great video mate. The little fergie sounding nice .🍻🐕🐶👍
Cracking as always. Fud Weasel's new hair style is a brave choice, always thought he suits orange better than green tho
Why thank you.
Awesome you could get parts for the pump. I remember selling my old BMW R69s when the factory stopped supporting the old beauties. After awhile, it just became a rich man's endeavor. Sad.
Great job Kimberly, Kurt and Puppo:):)
Always love to see your videos! Keep it up!
Excellent video Lord Muck :) also got Kim back help you again excellent and hope you're doing well too!
I just love the restorations!
Great video good to see Kim back in a video, the fergie looks better.
Interesting to see the DB crawlers in the background, hope they will appear at some point.
Flippin brill , love watching this ,hope I win a day out 👌👌👌
A day out is great, but you'll still have to wear your tag like His Lordship does and you can't go far.
nice to see you got your glamorous assistant back mucker another great vid mate
I think you are mistaken, I'm working away at the moment.
Another excellent update!
I guess that your brass safety button has been disconnected on the side of the transmission?
Great content as always.
It's hammered in tight like most of them were.
Another great video, very informative.
Looking forward to the matador, 👍
I suppose for it's time, the start position on the stick was a good safety feature, as a lot of folk would have come straight from horses. So little training for making sure it was in neutral prior to starting and possibly saved a few people's lives!
Great little tractors the fergy's first tractor i drove on the farm we had 2 of them
A good interesting video on how the fuel system should be on the fergy. It's become a little jem 👍
Remember to put some oil in the czm box of the injector pump. Also drain the rubbish if there is any in the bottom. Also at the rear side if some of these old inline pumps there are filters in the housing like wadding. It is sometimes behind the pump so you might need to take it off the clean it.
Already done. I've done the injector pump when I bought it as I thought it was playing up.
can't wait for the matador restoration series, some friends were out with 3 of them last weekend towing 3.7" ww2 anti aircraft guns.
Yes I saw 👍
It looks like at the 10 min mark Kim is using a channel lock spanner. Those are some of my favorite adjustable wrenches.
First of all awesome video I’ve been wondering how you guys doing and somehow I’ve been missing your videos be safe out there can’t wait for the next one
Great vid as always keep them coming.
I used to love County Commercials when I was a kid
Love from America. I also have a diesel tractor with a system full of "shite." Its funny how often I call my tractor and other things that same expression.
Dinosaur spaff, LOL. Mucking marvellous!
Excellent video as always.
A simple lift pump & clean fuel system. Kinda basic, but the dividends are golden and nearly always neglected.
Love it when old girls fire up at a touch....tractors man... I'm talkin' tractors!
Great vid mucker, by the way had to get the cosby laughing gas out on a cat d4 that was stuck on my lorry, bloody typical always starts 1st time , anyway the look on the customers face was priceless, had to laugh when she roared into life. 🙃😁
What a fucking treat 👌🏼
Interesting vid👍didn’t realise fergie need to start that way. Ever seen Australian International 86 series like our 786 it has no foot throttle but hand throttle very tricky changing gear at right revs. But Ford made most tricky gearbox Rubik cube, definitely one any tractor fan.
Brilliant video as always
Always look forward to seeing your videos nice job keep up the good work
Another cracking video mate,cheers.
And I’m happy to hear there will be more matador videos.
Another very informative video
Brilliant mate look forward to the questions from George and your self lovely little fegie too sweet as a nut love it
Your Lordship, at 14:31 I could hear Greta screaming "How dare you!" some where in the World.
That sounds really nice when she started up
Well done that fergie sounds great now
I'll be honest with you I love tractors but I would give anything to go up in the air with you and a p-51 c mustang those planes are just so beautiful and you're lucky asses got to fly em flucker
Good video Kurt👍 wonder how many men are hungerin to have Kim as their other half to do all their mechanical engineering work for them 🤔😂 reckon one o your clips inserted in the video gonna put u on the packham black list 👍🤣🤣 never noticed was that TEF fitted with the decompression lever🤔
The Ferguson sounds nice!
I remember when I was young we had a old fergy like that Dad sold it on to much wrong with it would cost to much to fix be good if you could talk Mat in to bring one of his machines as well as you two wil mid Wales
Oh no Kim had an adjustable swedish nut lathe 😂🤣😳
Bahco's finest 😂
@@LordMuck
Bahco is pretty good tools. Part of snap on or it’s part of bahco not sure. Snapon is famously known for its rape van thanks to AVE 😂 Our canadian comedian entertainer and engineer maybe 🤔
the gearlever starting on the Fergies was a thing Harry Ferguson himself wanted on the tractors. he dident want any children and adults for that matter, to be able to start the tractor in gear and run them selfs over.
Cool video as always mucker 👍🙂
You haven't shown up in my notifications for a few weeks. I'm blaming youtubes algorithm for this travesty. ........ Be well and stay safe.
Can I have a go in the tf. Please.
All beautiful.👍
Just re-sealed the injector pump on my tef20
My friend had a grey and it had a button which you pressed with your heel then the stick
Which most have been done away with
The check valve in the fuel pump looked just like the ones used on Hosier milk tanks to stop water getting in the air blower!