This video only serves for recovery scenarios now. Belabox has since got official eMMC installation images, that should be used to install Belabox on the eMMC. Only follow this video, if those don't work for you. I have put the command for clearing the SPIflash in the description. There are also links to the download pages, etc. and a few affiliate links to the products used in the video.
@emeraldAudiovisual It arrived without problems until 4:51, after that I connect a micro SD card with the Belabox image and connect the Orange Pi 5 Plus to the modem, but it simply does not connect to the network, the LAN indicator on the modem does not light up or the IP address appears, and I also tried to connect it with a USB modem and it does not connect to the network either. Do you know what the error is and what is the solution?
Like I pointed out at that point in the video, you will need to clear the SPIflash, if the LED just is red and doesn't go into blinking. This installation method should only really be used for recovery purposes at this point of time. Belabox has official eMMC installer images on the website, where you don't need the RKDevTool to install the OP5+. These were only created after I recorded the video.
I have put the command for clearing the SPIflash in the description. There are also links to the download pages, etc. and a few affiliate links to the products used in the video.
Yes. It does. But please follow the guides on www.belabox.net/rk3588 and www.belabox.net/ . This video only describes the emergency recovery process. It has been superseeded with a proper microSD to eMMC installer.
I've been using the Jetson Nano 2GB with Belabox for a year and would really like to minimize the amount of gear I carry around. Would you suggest upgrading to this setup, as it doesn't require CamLink and (maybe) doesn't need me to use two powered USB-hubs to connect my Wi-Fi/SIM modems. Or is there a better option to carry as little as possible (without too high of a monthly cost).
In all honesty: I wouldn't change for the sake of changing. Yes, the OP5+ has a bit better power budget, but you still might need those powered hubs, if your modems are that hungry. If your Jetson ever gives up it's ghost, I would most certainly recommend upgrading to the OP5+.
Oh man, right in time! After various unsuccessful attempts to IRL streaming without belabox, I'm getting my OrangePi 5 delivered today. This video will be super helpful :).
![BELABOX IRL live streaming HDMI encoder - setup tutorial - the new easy way [now with subtitles]](/img/n.gif)
This video only serves for recovery scenarios now. Belabox has since got official eMMC installation images, that should be used to install Belabox on the eMMC.
Only follow this video, if those don't work for you.
I have put the command for clearing the SPIflash in the description. There are also links to the download pages, etc. and a few affiliate links to the products used in the video.
@emeraldAudiovisual It arrived without problems until 4:51, after that I connect a micro SD card with the Belabox image and connect the Orange Pi 5 Plus to the modem, but it simply does not connect to the network, the LAN indicator on the modem does not light up or the IP address appears, and I also tried to connect it with a USB modem and it does not connect to the network either. Do you know what the error is and what is the solution?
Like I pointed out at that point in the video, you will need to clear the SPIflash, if the LED just is red and doesn't go into blinking. This installation method should only really be used for recovery purposes at this point of time. Belabox has official eMMC installer images on the website, where you don't need the RKDevTool to install the OP5+. These were only created after I recorded the video.
I have put the command for clearing the SPIflash in the description. There are also links to the download pages, etc. and a few affiliate links to the products used in the video.
This video is going to be a hit
It already is :)
Did you connect to orange pie with c to c type cable from your pc?
I don't understand how the file was transferred
Are you installing belabox over an existing OS, or is it a fresh install? 4:49
No, I'm using the image on the microSD to clear the SPIflash.
so with this one the camlink 4k is not needed right?
Correct.
I just got the orangepie5+, do I need to buy an eMMC module as well to get the Belabox installed & running?
No. You can also run it from a microSD card.
so this allows me to use it as an encoder with the hdmi in?
Yes. It does. But please follow the guides on www.belabox.net/rk3588 and www.belabox.net/ . This video only describes the emergency recovery process. It has been superseeded with a proper microSD to eMMC installer.
What’s the best recommended version to get if I need to install belabox and use it for streaming? 4gb or 8gb?
The 4GB version is more than plenty. belabox.net/rk3588/ lists the boards.
I've been using the Jetson Nano 2GB with Belabox for a year and would really like to minimize the amount of gear I carry around. Would you suggest upgrading to this setup, as it doesn't require CamLink and (maybe) doesn't need me to use two powered USB-hubs to connect my Wi-Fi/SIM modems. Or is there a better option to carry as little as possible (without too high of a monthly cost).
In all honesty: I wouldn't change for the sake of changing. Yes, the OP5+ has a bit better power budget, but you still might need those powered hubs, if your modems are that hungry. If your Jetson ever gives up it's ghost, I would most certainly recommend upgrading to the OP5+.
how to do this same method with macbook OS?
Belabox only works on the Jetson Nano or certain RK3588 boards. It will not run on a MacBook.
Oh man, right in time! After various unsuccessful attempts to IRL streaming without belabox, I'm getting my OrangePi 5 delivered today. This video will be super helpful :).
Hopefully an OrangePi 5+. Because the OrangePi 5 (non-plus) is not supported by Belabox.
@@EmeraldAudiovisual Yeah, yeah, it's the Plus version ;)
Cool, thank you!