EDIT (2022): If you're having issues setting this up (e.g. Error #6/10), install websocket 4.9.1, install obs-websocket-js with the install.cmd within "Documents\Loopy SRT Monitor" (using option 2!), and make sure you have the line: "WebSocketConnection=obs-websocket-js" within your config.ini folder. Big news! I've made a dedicated tech channel: th-cam.com/channels/t3O3ScWSlpGGiXLVMSNJRg.html - It'll feature all kinds of IRL / Streaming / Tech videos. Want to know more on IRL setups? Full playlist available here: th-cam.com/play/PL-czD6_A6J7RXT1EKFFgBP3PJCPaBLPFL.html
Having just set most of this up myself surely gopro settings are the next topic!! Do you use obs remote to start, stop and switch scenes manually?? you could potentially touch on setting up the obs remote to turn stream on and off and switch scenes manually (i know its easy but worth mentioning). Discord community is amazing and cheers for these vids they are literal lifesavers!!!
@@Southern_Surfcaster Did it work for you? I read in the comments from other videos, it didn't work, it's not worth it... is it? what do you think? what´s your experience?
@@luchiplayerone the setup as a whole has worked perfectly for me once I ironed out a few problems, havent fully tested the loopy scene switcher yet though only set it up and tested it works.
So far what I've done was having my BRB video play below my SRT media source on OBS. That way when the media source disconnects or stops showing, BRB takes over until it reconnects.
Greetings. Well the Subject says it all. But a bit more information. I use the X-T20 as a webcam / streaming cam and wonder if the LCD on the back screen could get a burn-in because it shows the same picture for hours and days. Would be nice if the Display and View finder (both) could be turned off after a few seconds until key press or something similar while "recording" to not risk burning in the image. I checked the settings but couldn't find anything that would help me here. Maybe I missed a setting? Otherwise what would be the best way to ask Fujifilm for a Feature in the coming release? Cheers.
I have a similar setup to all this. Great plug-in. I’m gonna have to use it! A side note, do you have any idea on how to get stream notification sounds and tts to play out loud while you are IRL streaming? Ideally without an echo too.
hey thanks for vid. wyd if you dont have access to your pc and you want to IRL Stream? an example i can give is when you are on holidays in another country that you dont have your pc with you. or for example you have a laptop but you dont have a good internet connection to set it up
Hello, thank you very much for the tutorial, but I have not been able to connect the loopy, the blue box keeps coming out and I have already done everything you said in the video, can you help me?
? Do you know how I would be able to stream from my Starlink. Without having a computer in the car. I have a GoPro and I have an encoder. We do the Baja 500 and the Baja 1000 and would like to try to figure out how to stream to TH-cam or Facebook without it shutting down every half an hour. Thank you
Concerning the dual SRT sources as mentioned at 12:49 In my initial testing with two SRT inputs in the same scene. Over time the streams run out of sync. Have you noticed this in your streams and if so how do you handle it?
Like to stream via gopro11 or some other action cam via android phone. For irl dreaming what other hardware do I need? Or is phone and go pro enough to stream via art and obs?
Hi. I watched the video yet im still unsure. Windows is just a pain in the ass for stuff like this and I would like to be able to integrate it into my existing linux instances without messing with VMs or paying to Google Cloud for extra instances plus a windows server license. Have you tried this on a linux server environment?
Am happy to be here, I use to livestream and when i heard about SRT, i was so happy. i need so more to learn about this and how it can improve me work. i Stream Using Vmix then send to Live U solo through HDMI and then Send Live U solo to Switchboard for multi stream. i still have network issues, when i go to remote areas. Am hoping there someone out there that can teach how to use SRT to stream to Facebook and TH-cam
How can my phone camera as a media source? I was planning on using Droidcam OBS, but it only outputs via wifi. Am I able to use the Streamlabs android app in conjunction with this method?
Hey, perhaps someone can help me? I've filled in everything correctly including the port forwarding, but I still don't get any image, only when I enter the IPv4 address. I've also checked if the firewall settings were correct, and they were. Any ideas?
Hi sprEEEzy, The tuto is clean and nice but for me, something doesn't work with the SRT Monitor. I do have the blue screen but because it doesn't find the obs-websocket-js in the js folder which is placed in the nodejs/node_modules folder AND nodejs is installed. I reinstalled several times and restart the computer but still doesn't work. Do you know what it could be? Thank you
I had the same problem untill I finally payed attention to this line in the readme, and it fixed the issue. Media Sources must have "Restart playback when source becomes active" disabled.
@@sprEEEzy Thank you for the quick reply. That is what I had read to do when installing it. It just seemed strange that it restarts over and over. Love your help video's you rock!
2 ปีที่แล้ว +1
Hi sprEEEzy good video and thanks for the content for streamers I can´t connect both programs :( The error Is obs open? test 6 of 10 failed is the error message Blue screen with error mentioning this open obs? and the first program I open is the obs before the srt monitor but it doesn't seem to detect it. any help on what problem may be occurring between these 2 programs so that it does not detect that the obs is running? PS: Have I already configured the configuration file of the loopy750 SRT-Stats-Monitor and checked that both programs are allowed in the windows firewall?
HI there ! I having issues setting this Loopy's SRT Monitor (e.g. Error #6/10) install websocket 4.9.1, install obs-websocket-js with the install.cmd within "Documents\Loopy SRT Monitor" (using option 2!), have the line: "WebSocketConnection=obs-websocket-js" within my config.ini folder. -reinstal OBS v28 for older OBS v27 Still NOT WORKING Error #6/10 PLS IS ANYONE CAN HELP ME?
vMix natively supports an SRT ingest server but lacks the logics to switch scenes. Their proprietary vMic call solution also runs on the basis of SRT and shows a reconnecting icon if the input signal is lost iirc.
You should really stream bit more,and focus your self on more popular games. You become small streamer from medium one,and all by your own doing. Best of luck man
HI there ! I having issues setting this Loopy's SRT Monitor (e.g. Error #6/10) install websocket 4.9.1, install obs-websocket-js with the install.cmd within "Documents\Loopy SRT Monitor" (using option 2!), have the line: "WebSocketConnection=obs-websocket-js" within my config.ini folder. -reinstal OBS v28 for older OBS v27 Still NOT WORKING Error #6/10 PLS IS ANYONE CAN HELP ME?
EDIT (2022): If you're having issues setting this up (e.g. Error #6/10), install websocket 4.9.1, install obs-websocket-js with the install.cmd within "Documents\Loopy SRT Monitor" (using option 2!), and make sure you have the line: "WebSocketConnection=obs-websocket-js" within your config.ini folder.
Big news! I've made a dedicated tech channel: th-cam.com/channels/t3O3ScWSlpGGiXLVMSNJRg.html - It'll feature all kinds of IRL / Streaming / Tech videos.
Want to know more on IRL setups? Full playlist available here: th-cam.com/play/PL-czD6_A6J7RXT1EKFFgBP3PJCPaBLPFL.html
Having just set most of this up myself surely gopro settings are the next topic!! Do you use obs remote to start, stop and switch scenes manually?? you could potentially touch on setting up the obs remote to turn stream on and off and switch scenes manually (i know its easy but worth mentioning). Discord community is amazing and cheers for these vids they are literal lifesavers!!!
@@Southern_Surfcaster Did it work for you? I read in the comments from other videos, it didn't work, it's not worth it... is it? what do you think? what´s your experience?
i want gopro settings.. thank you so much for everything!!!!!
@@luchiplayerone the setup as a whole has worked perfectly for me once I ironed out a few problems, havent fully tested the loopy scene switcher yet though only set it up and tested it works.
@@Southern_Surfcaster thanks for the answer. Could you tell me wich was the hardest problem to get it work??
We need a new updated video regarding this topic!
great Tool. i used it in my irl Streams but i have a problem that that it only can switch on a failed connection and not on a low Bitrate
Neat. I never thought the 2 source thing would be useful but having your screen pop up would be cool in some cases.
Biggest Help in IRL Streaming !
Works perfectly so far.. I will have to hook up my other cameras and going and this will be a game changer! THANK! you!
So far what I've done was having my BRB video play below my SRT media source on OBS. That way when the media source disconnects or stops showing, BRB takes over until it reconnects.
Wow really cool stuff! I tried same software for rtmp, but srt is x10 better! Thanks will check and happy to saw you
Thanks a lot for the tutorial. I followed the steps and it just works!!! Awesome!!!
what if my cam isnt in obs as amedia source its a browser source so how do i get it to go to that
Man! Hello Friend! Please tell us about setting and displaying donations!
Thank you so much :)
Hello, thank you for all this info! What phone app do you use to start your relay PC OBS stream remotely?
Check my tech channel!
Greetings. Well the Subject says it all. But a bit more information.
I use the X-T20 as a webcam / streaming cam and wonder if the LCD on the back screen could get a burn-in because it shows the same picture for hours and days.
Would be nice if the Display and View finder (both) could be turned off after a few seconds until key press or something similar while "recording" to not risk burning in the image. I checked the settings but couldn't find anything that would help me here. Maybe I missed a setting?
Otherwise what would be the best way to ask Fujifilm for a Feature in the coming release?
Cheers.
Hello. I've never had burn-in issues on my Sony. I'm not sure for the Fuji, but it probably won't have any either.
I have a similar setup to all this. Great plug-in. I’m gonna have to use it!
A side note, do you have any idea on how to get stream notification sounds and tts to play out loud while you are IRL streaming? Ideally without an echo too.
Not sure on the stream notif sounds...
Without an echo? Use wireless inears ^^
Hey mate, great tutorial! How do you control your stream outdoors? Start the stream, change scenes etc etc. Thanks and keep the great work!
I'll do a video on the apps I use for the whole thing
I use Streampuppy with my 4G mobile data plan. Does the job but needs some improvements on the UI.
hey thanks for vid. wyd if you dont have access to your pc and you want to IRL Stream? an example i can give is when you are on holidays in another country that you dont have your pc with you. or for example you have a laptop but you dont have a good internet connection to set it up
Hey! You can look into cloud based OBS solutions, which you could use as "stream PC"
Hello, thank you very much for the tutorial, but I have not been able to connect the loopy, the blue box keeps coming out and I have already done everything you said in the video, can you help me?
Hey, feel free to stop by our Discord!
Great work! is there a place i can config at which bitrate the scene will switch say like at 500?
? Do you know how I would be able to stream from my Starlink. Without having a computer in the car. I have a GoPro and I have an encoder.
We do the Baja 500 and the Baja 1000 and would like to try to figure out how to stream to TH-cam or Facebook without it shutting down every half an hour. Thank you
Concerning the dual SRT sources as mentioned at 12:49 In my initial testing with two SRT inputs in the same scene. Over time the streams run out of sync. Have you noticed this in your streams and if so how do you handle it?
You may just have to reset the streams every once in a while. Not sure there's a good way to deal with this. Try increasing the delay on both streams.
I prefer noalbs. It has some nice chat commands and a chat bot etc
Like to stream via gopro11 or some other action cam via android phone. For irl dreaming what other hardware do I need? Or is phone and go pro enough to stream via art and obs?
can you use a screencast and camera to broadcast at the same time same device?
GPS & Map Live Overlay?
how to use loopy srt on streamlabs obs?
Hi. I watched the video yet im still unsure. Windows is just a pain in the ass for stuff like this and I would like to be able to integrate it into my existing linux instances without messing with VMs or paying to Google Cloud for extra instances plus a windows server license. Have you tried this on a linux server environment?
is loopy's srt monitor windows only?
Am happy to be here, I use to livestream and when i heard about SRT, i was so happy. i need so more to learn about this and how it can improve me work.
i Stream Using Vmix then send to Live U solo through HDMI and then Send Live U solo to Switchboard for multi stream.
i still have network issues, when i go to remote areas.
Am hoping there someone out there that can teach how to use SRT to stream to Facebook and TH-cam
How can my phone camera as a media source? I was planning on using Droidcam OBS, but it only outputs via wifi. Am I able to use the Streamlabs android app in conjunction with this method?
Hey, perhaps someone can help me? I've filled in everything correctly including the port forwarding, but I still don't get any image, only when I enter the IPv4 address. I've also checked if the firewall settings were correct, and they were. Any ideas?
Hi sprEEEzy,
The tuto is clean and nice but for me, something doesn't work with the SRT Monitor. I do have the blue screen but because it doesn't find the obs-websocket-js in the js folder which is placed in the nodejs/node_modules folder AND nodejs is installed. I reinstalled several times and restart the computer but still doesn't work. Do you know what it could be? Thank you
Why does this application open a new websocket connection to OBS every second continuously?
I'm having this same problem. I turned the alert off. Did you find a fix to this?
I got everything working but when it disconnects and goes to BRB, it doesn't reconnect back to the Main scene. Any help?
It might be a discrepancy between the config file names and OBS scene names. Feel free to stop by our Discord if you need more help
I had the same problem untill I finally payed attention to this line in the readme, and it fixed the issue.
Media Sources must have "Restart playback when source becomes active" disabled.
Don't understand why OBS Web Socket restarts over and over. Got it working though. Thank you
Just turn off the windows notifications
@@sprEEEzy Thank you for the quick reply. That is what I had read to do when installing it. It just seemed strange that it restarts over and over. Love your help video's you rock!
Hi sprEEEzy
good video and thanks for the content for streamers
I can´t connect both programs :(
The error Is obs open?
test 6 of 10 failed is the error message
Blue screen with error mentioning this open obs?
and the first program I open is the obs before the srt monitor but it doesn't seem to detect it. any help on what problem may be occurring between these 2 programs so that it does not detect that the obs is running?
PS: Have I already configured the configuration file of the loopy750 SRT-Stats-Monitor and checked that both programs are allowed in the windows firewall?
same for me
Does this work with Streamlabs obs? Watching video rn idk if answered
Not unless you stream to a middleman PC with it.
Hey, just wondering how you did the two source thing. Does your TBS have 2 hdmi ports? One for the gopro and one to screencast the phone? Thanks.
Phone doesnt need the encoder! Just use Larix Screencaster
@@sprEEEzy Thanks for responding. I’ll definitely take a look at Larix. Cheers!
super tutorial , i would a tutorial how to setup your phone to obs, maybe using irl pro app
It says OBS Websocket connection failed, I don't know where I went wrong, I need help ;-;
and how to add the gopro source?
can you do this with streamlabs obs i cant find a way to install the websocket
Do not use any OBS version but the Studio.
@@sprEEEzy I swithed to obs and got everything working thanks alot do you know if theres a way to show my bitrate on stream Like Hitch?
@@HalfBakedTV Without overcomplicating the setup, probably not.
@@sprEEEzy I actually figured it out thanks for the help loving this setup
Plugin doesnt work for me, i installed it but doesnt show on OBS
Ty
super ☺
Can I use this if I stream from my phone?
Well, you need a middleman PC/Server to stream to.
HI there !
I having issues setting this Loopy's SRT Monitor (e.g. Error #6/10)
install websocket 4.9.1, install obs-websocket-js with the install.cmd within "Documents\Loopy SRT Monitor" (using option 2!), have the line: "WebSocketConnection=obs-websocket-js" within my config.ini folder.
-reinstal OBS v28 for older OBS v27
Still NOT WORKING Error #6/10 PLS IS ANYONE CAN HELP ME?
why not just use noalbs?
does it work with mobile phones?
Absolutely
Is there a solution for Linux?
noalbs
Map and GPS!!!
sprEEEzy hope you upload again pubg gameplay love from 🇵🇭
Wow 😘😘😘😘
With vmix its possible?
Probably is, but I'm not too familiar with vMix.
vMix natively supports an SRT ingest server but lacks the logics to switch scenes. Their proprietary vMic call solution also runs on the basis of SRT and shows a reconnecting icon if the input signal is lost iirc.
Great 👍 But I'm not understand how I can trigger a low Bitrate. Connection fail work perfect. But lower Bitrate? Many thanks 🙏
Yoo
You should really stream bit more,and focus your self on more popular games. You become small streamer from medium one,and all by your own doing.
Best of luck man
only files i see are config.default and config no config.ini why is this i cant get it to work
HI there !
I having issues setting this Loopy's SRT Monitor (e.g. Error #6/10)
install websocket 4.9.1, install obs-websocket-js with the install.cmd within "Documents\Loopy SRT Monitor" (using option 2!), have the line: "WebSocketConnection=obs-websocket-js" within my config.ini folder.
-reinstal OBS v28 for older OBS v27
Still NOT WORKING Error #6/10 PLS IS ANYONE CAN HELP ME?