I didn't hear you address any of these things: 1. Will it do time-lapse? 2. Will it do vertical? 3. Can it tilt and pan? Or does it just go back and forth? 4. Can you ramp up and ramp down the speed?
That's a great point! 1. Yes it does time lapse though I'm guessing you need to use the app to set the intervalometer then. 2. It will indeed to vertical slides, the motor has far more torque than it would otherwise need, and the reason is so it can lift a considerable payload vertically (drawback is the max speed isn't as fast as could be but you can see it in the video it's still plenty fast). 3. Like I said it has a track/pan rod. For tilts you'll need a 3 axis slider not a 2 axis slider. 4. Also covered this.
Just by chance whilst watching motorised slider reviews, where I jump through timelines at the same time as browsing Amazon offers on second monitor I stumbled upon this video and I got glued to the screen right away. I don't leave comments often, but this has been a fantastic review. What has immediately caught my attention was the opening interview and the way you used the slider there. You haven't just shown it's practical capabilities, but I got to know you and also what you love about this art, well, you making it. The pace and phrasing were absolutely believable, as if it were genuine. You went below surface and managed to promote yourself, as well as teach viewers something using the slider this review is about. I hit subscribe button halfway through even though I realised I don't need a motorised slider right now. I wish you the best of luck on your journey and thank you for sharing your hard earned knowledge mate.
Using this with the crane 3 lab with the transmount zoom and focus pulling system is just brilliant. Considering the rhino arc 2 is a couple of thousand pounds, if you have a zhiyun or dji already, then £350 for this is a bargain. There's a couple of videos out there showing the functionality with a gimbal, but there's no really good ones with in depth how to showing how to do it using the focus pulling system. I bought the 120cm version, and I love it.
Ok I will do a video on that linkage. Tempted to do a live video for this so people can interact and ask questions / give advice while I try to get the gimbal working with the slider
Thanks! I'm dropping a review of a new GVM slider this week which I'd recommend over this one, so long as you don't mind there not being manual controls. It's all done via app
Love the intro! I'd also would like to see a video/stream with a few different gambles on the slider as well. Was reading that to use a Ronin SC that there is a $60 add-on. I'm going to assume that is the same for others but not sure, so it would be interesting.
Hi Noel 👋 I hope my comment didn't sound as a form of privacy invasion your comment tells of a wonderful woman with a beautiful heart which led me to comment I don't normally write in the comment section but I think you deserve this complement. If you don’t mind can we be friends? Thanks God bless you….
![5 INSANE camera slider Tricks You Didn’t Know Existed! [YC Onion Hotdog 3 Slider]](http://i.ytimg.com/vi/7KoBsKkLip0/mqdefault.jpg)
I didn't hear you address any of these things: 1. Will it do time-lapse? 2. Will it do vertical? 3. Can it tilt and pan? Or does it just go back and forth? 4. Can you ramp up and ramp down the speed?
That's a great point!
1. Yes it does time lapse though I'm guessing you need to use the app to set the intervalometer then.
2. It will indeed to vertical slides, the motor has far more torque than it would otherwise need, and the reason is so it can lift a considerable payload vertically (drawback is the max speed isn't as fast as could be but you can see it in the video it's still plenty fast).
3. Like I said it has a track/pan rod. For tilts you'll need a 3 axis slider not a 2 axis slider.
4. Also covered this.
Just by chance whilst watching motorised slider reviews, where I jump through timelines at the same time as browsing Amazon offers on second monitor I stumbled upon this video and I got glued to the screen right away. I don't leave comments often, but this has been a fantastic review. What has immediately caught my attention was the opening interview and the way you used the slider there. You haven't just shown it's practical capabilities, but I got to know you and also what you love about this art, well, you making it. The pace and phrasing were absolutely believable, as if it were genuine. You went below surface and managed to promote yourself, as well as teach viewers something using the slider this review is about. I hit subscribe button halfway through even though I realised I don't need a motorised slider right now. I wish you the best of luck on your journey and thank you for sharing your hard earned knowledge mate.
Thank u for your detailed review and feedback, we will keep in mind and make improvement!
Using this with the crane 3 lab with the transmount zoom and focus pulling system is just brilliant. Considering the rhino arc 2 is a couple of thousand pounds, if you have a zhiyun or dji already, then £350 for this is a bargain. There's a couple of videos out there showing the functionality with a gimbal, but there's no really good ones with in depth how to showing how to do it using the focus pulling system.
I bought the 120cm version, and I love it.
I really like the quality of the YC Onion equipment.
It's the first of their products I've used but yes this feels top notch in terms of build and quality. Looking forward to trying more of their gear
This versus the GVM that you had reviewed,if you had to choose one, which would it be and why?
Loved the video ❤️
P.S.: Your previous look was better.
This is great ! Thank you for taking your time to do this . I’m sold on this due to the Pricepoint, and what it can do .
Awesome slider. Thank you for this wonderful review.
are softwere issues fixed now?
The firmware should have user override on the transition time. Should be trivial to do...
Yes, please, please, please do the test with gimbal. Thanks for all you do sir :)
Ok I will do a video on that linkage. Tempted to do a live video for this so people can interact and ask questions / give advice while I try to get the gimbal working with the slider
Nice review. Love the use of the probe lens. Using a slider to shoot a slider.
Thanks!
Great video ! Buying one asap for interviews
Thanks! I'm dropping a review of a new GVM slider this week which I'd recommend over this one, so long as you don't mind there not being manual controls. It's all done via app
Love the intro! I'd also would like to see a video/stream with a few different gambles on the slider as well. Was reading that to use a Ronin SC that there is a $60 add-on. I'm going to assume that is the same for others but not sure, so it would be interesting.
Any update on the software man?
Yes, please do a video with a Ronin S. Thank you.
I don't own a Ronin S unfortunately. But I will do one with my Zhiyun Crane 2S
Hi Noel 👋 I hope my comment didn't sound as a form of privacy invasion your comment tells of a wonderful woman with a beautiful heart which led me to comment I don't normally write in the comment section but I think you deserve this complement. If you don’t mind can we be friends? Thanks God bless you….
✌....