ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to Install (STEP BY STEP) Ape Hangers Handlebars on Harley Davidson Street Glide
ฝัง
- เผยแพร่เมื่อ 17 ส.ค. 2024
- Learn STEP by STEP how to install ape hangers onto a 2014-2017 Harley Davidson Street Glide. We used 1 1/2" HCC Jarheads that are 14" tall and beautiful gloss black powder coat.
Click HERE to visit our website:
▶ hillcountrycus...
Located in Austin, Tx, Hill Country Custom Cycles is a Harley Davidson handlebar expert that has been in business since 2002. Through years of sales of Plug and Play™ kits and custom Harley handlebar fabrication, we've come know the potential frustrations of installing new handlebars for your ride. With this video we hope to bring you some DIY confidence and save you time and money.
HCC aims to provide you with simple, yet high quality how-to videos and product reviews. Stay tuned for more and click HERE to subscribe!
▶ bit.ly/Subscrib...
If you have any questions about, please comment below or email us at:
▶ CustomerCare@HillCountryCustomCycles.com
Or give us a call:
▶ (877) 755 - 4455
Check us out on Facebook:
▶ bit.ly/HCCustom...
Check us out on Instagram
▶ / hillcountrycustomcycles
Thanks for watching!
- Your friends at Hill Country Custom Cycles
Disclaimer:
This video is intended for educational purposes only and is not a substitute for hiring a professional mechanic if you are not skilled or do not have the tools to perform the maintenance procedures shown. Due to factors and variables beyond the control of HCCC, HCCC cannot guarantee that the information provided is applicable to your situation or that it is complete as to all steps that should be performed. HCCC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. HCCC recommends safe practices when working with tools, equipment, or chemicals seen or implied in this video. HCCC recommends following procedures of the maintenance manual specific to the motorcycle and that only those qualified by prior experience perform the work shown. NO INFORMATION CONTAINED IN THIS VIDEO SHALL CREATE ANY EXPRESS OR IMPLIED WARRANTY OR GUARANTEE OF ANY PARTICULAR RESULT. Any injury, damage or loss that may result from use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not HCCC.
Great video! I was going to pay someone to install my new bars but after watching this I am confident it's a job I can easily do myself. Thanks.
Best video out there, shows more in 25 min than everyone else in 2 hours.
Awesome step by step! Thank you!!! Took just under 5 hours from start to finish. Saved $500.00 from installation at the stealer. The only hard part was pulling the wires from the HD Batwing bars already on the bike. Thanks again!
This just guided me on my 16" install the last 2 days. You made it look so easy 😂
Best how too video i have seen. Great camera work and explanation. Thanx
Great video. I was apprehensive about doing it myself but you made it simple.
Watched several of these install videos, best one I've seen.
+Sigtacops 19 Appreciate that!!!!
Deffinantly very detailed and easy to see what's happening.
I cannot thank you enough for this video! I have a 2015 Street Glide Special that I have been wanting to put new bars on since day one, and I wasn't going to pay the dealership to install them. I'll be ordering one of your kits soon! Thanks again.
Great Video! Just finished installing 14's on my 2018 Street Glide. Having your video in my shop to reference made it so easy! Thanks!!
Dang bro. Best video ever and I’ve watched a bunch. Thanks
Just got my pre-wired LA choppers twin peaks from HCC. Watched this video and did the install in 2 hours. Wow. So worth the money to pay for the pre-wired.
Best how to video I've ever seen. Great detail with explanations.
Thanks for Video. Easy to follow and glad i did it myself.
Great video did my bars on my 07 ultra classic through this guy thank you
Best install video I’ve seen. Thanks!!
Awesome video, clear & easy to understand ,in all a great presentation.
Great video, just want i needed to help me with a decision. I just recently purchased a used HD and feel more confident that replacing the handlebars is something that I can accomplish myself. Checking out your site now, well done.
Best damn video I ever watched I was putting on grips pinched the wires so I had to change wiring harness on left side this video made it so easy had it done in 15 minutes Thanks Guys GREAT JOB !!!!!!
Wow, you Rock! Best video and explanation ever of any thing and I watch TH-cam videos all the time.
Just bought a 2017 cvo blue streetglide with 12” bars. Can’t wait to ride. Winter up here in Canada.
Thanks so much!
Subscribed!
Great job been a great help thank you and thank you for being there...
Great job!!!
Excellent video.
Great video, best so far
Awesome video,keep up the good work 👍
Thanks, on point video!
Can you please make a video on how to replace the riser bushings on a later street glide like this? Thank you
I did my bars with the gorilla clamp but I still have some play so I think the polyurethane bushings will help
Looking good
Great video 🤘🏼
Great detail
+Chris Frias thank you
Great video! I have the same bike. what windshield you have on this baby? Looks nice!
Awesome video! Thanks for sharing. I'll be doing some here soon and I have to say I feel even better about doing it after watching this. Great stuff
Damn good video, best one I've seen so far. Will I need any extensions for 10" bars?
Great video! I have a 2022 Street glide special and the stock bars are causing lower back pain. They seem lower and further away than my 2020 Road King Standard’s stock bars which fit me PERFECTLY. Any recommendations for bars that have a straighter hand position, and will allow me to sit more upright?
Are you guys going to Biketoberfest 2021 in Daytona this year and will you be installing?
Do you recommend changing riser bushings to the polyethylene bushings
What a great video. Any difference with a 21' street glide special w/12" 1-1/2 bars complete kit? Thank you sir!
Will stock clutch and brake cables work or do I have to get aftermarket
Wow!! Fantastic video. Thanks for posting. Clearly shows why this is such a labour intensive job. Just picked up a 17 RK Special and hoping to switch bars asap. Doing homework on tallest bars possible without changing any cables or lines. Any idea?
Ain't nothing like riding high
Do you lock tight the 4 bar bolts?
Awesome video, I was gifted a 14" ape bar for my 98 Dyna, and now after this video, I am browsing through your site to purchase the cable kit. Any recommendation on the cable kit would be awesome, but love the video and looking forward to installing it on my bike.
is this the same for the 2021??? i just bought fat bagger bars for my 2021 im thinking about doing it myself
Nice video I'm going to save a lot of money do it my self ...
I have seen where they do KST 14" on the same bike without changing cables. Is that really possible??
If I install a 12". Do I need to change the hydraulic hoses too ??
I am currently waiting for my 14" LA Choppers Twin Peaks prewired set to arrive for HCC to install on my 14' ultra classic and I have watched this video about 12 times to familiarize myself with the process. I took everything off and got everything ready to install the new bars when they arrive, and I did everything step by step. All went to plan. This is a very good video. Now how do I replace my riser bushings? lol
+Brandon McNeilly That is a great question. We have plans to do a video. However, we do all our videos on a lift because recording is much easier. It does not allow you to turn the bars or steering head because the front wheel is clamped. The bike needs to be on a jack instead. No excuses, just haven’t done it. Thanks for bringing it up though.
@@HillCountryCustomCycles not a problem. Thanks for the quick reply. Another quick question, what size i.d. hose do I need to bleed the brakes and clutch? Also what size barb fitting do I need to use after cutting the line for the fuel tank
How difficult would it be to install 12 inch bars on a 2005 Electra glide ultra classic vs a 2020
Have you ever had to grind the fairing or the front button cover to fit the 11/4" bars?
Does my 2016 Fat Boy S have the same connectors in the switch housing? If I get just the pre wired kit, do I still need to send my controls in?
I dont believe I need to change lines on my 2015 streetglide to put 10" bars on ? does anyone know for sure??
Great video thank you
What does that trigger switch on the left hand controls actually do? I have no clue..
It cycles the trip meter
can you help me i dont know if my last bike was a 16 or 18 as i had it only 2 weeks and got cut off and almost killed by a delivery driver and never had the chance to measure the bars they were super comfortable I only have pictures of it wish i could find out how big they were I miss them alot do you know where i can find a place that has them installed to try out thanks
I was down for 6 months knocked my teeth through my lips through my nose and forhead was down to skull incase anyone was wondering they admited faullt in the end still not happy lost a great deal on an even greater motorcycle. still cant see out of left eye now ride on and be safe people you have to watch others closely cause no one is watching you
No videos for install for bars or grips(heated) for 2012Ultra
nice video,i will do my my self really help whats you do ...
Would this be the same procedure for my 2018 Fat Boy? Tank off etc. ? I want to install a set of 1"3/4 T bars. 😊
This is such a great video. Question for 12 inch bars on a 2020 SG do I need longer clutch and brake cables?
What did you find out?
Great explanations! Thanks!
+JC Galiano We appreciate the comment, thanks for watching!
If like to see a video and bar recommendations for 2009-14 ultra classic.. Looked on line not one
Hey Hill Country,great video. i need a set up with 12" bars. whats the cost please. Also install price. Thank you.
Great Job.....
Hello what does the single white/black lead wire that connects in the right handlebar switchback do?? I'm doing handlebars as we speek and I broke the connector
+Shawn Flanders it is for heated grips
At 10:50 do you ever drill a little dimple for those set screws so they get a better bite?
+Mike McCartney I have really needed to, but you could, as long as they line up perfect.
What length clutch cable was required for the 14" inch bars?
What did you find out?
How do you get the air out of the new brake line from the front brake master cylinder to the ABS module?
Put some Paul Yaffe 12" monkey bars on 2018 Streetglide special. Follow Roberts steps and you can do it. Wasn't a bad job at all. I would just say I got the polyurethane bushings for the risers and long story short you pull the triple trees off to replace. I do wish that was in this video. And one other thing the pulling the ignition switch off and putting on is explained but some other videos on you tube explain it better cause i did have a problem but i did get it back on after some trail and error. At first the bars felt weird but now i don't know how i rode without them. Very comfortable.And lets not forget the cool factor. I was going to go with 14' but after a lot of research I choose 12". The 12" still leave me room to see into my stock mirrors I didn't want to put on the other in the wind mirrors. I'm 5'10" and i think the 14" would have been to long for me. Probably will be ordering some for my bro's Streetglide in the future
Is removing the triple tree to install the bushings a must?
why size bars are these? Look like 14".
great video
Thank you! We appreciate you watching!
what about internal clutch and brake lines, do you offer this ?
+mixalis Unfortunately we do not offer those at the moment, but we are looking to in the future. Keep an eye out on hillcountrycustomcycles.com
is this the same install as a Ultra Limited?
+Darin West yes it is
@@HillCountryCustomCycles I am attempting to install my 14" apes and unfortunately they are the ones with the sharp 90 instead of rounded. I am having a hell of a time getting the wires through them
Can you sell this set up with the wire already inside the handle bar?
+Rafael Sierra Yes, we have them available with all the wiring inside. All you have to do is plug them in to the bike.
@@HillCountryCustomCycles I will like to install a gloss black 12" apes handle bar. For the 12" I dont need to replace any brake line or clutch line? Thanks
Ok I need 2 big crown royal bags... Guess I'm getting fucked up tonight lmao
WTF...This guy has dam near dismantlement the entire bike. For a rookie like me, not worth it. I'd rather spend the money.
I bought the bars and the job is very easy. The video is a great tutorial. the bags, seat and tank come off in a matter of minutes and the ferring is easy.
There's no way I'm putting all that back together the right way 😂 I have a 21 ultra. No way 😂😂
It was literally only a handful of screws and nuts. Lol
Easy my ass 🤣🤣🤣
Whats the price on those bars with the wires already prewired ?
+Jovica Narancic $1229 with all cables and installation materials needed.