2014-2023 Street Glide Handlebar Install | Harley Street Glide Motorcycle Handlebars
ฝัง
- เผยแพร่เมื่อ 22 ม.ค. 2020
- Detailed installation video on installing 12" Mayhem Bagger handlebars on a 2016 Street Glide using stock brake and clutch lines. This process will be about the same for Electra Glides, Ultra Classics and Ultra Limiteds. KST Kustoms Mayhem Bagger, Bison Bagger, Patriot Bagger, Punisher and Six Bend Kicker. Applies to street glides, electra glides, ultra classics, ultra limiteds and trike
- ยานยนต์และพาหนะ
I was certain I would be returning my bars for prewired. I watched this last night, slept on it, woke up this morning and did it exactly as he describes (down to the 12 ga stranded) and it worked in an hour. Thank you!
Very nice! That’s what it’s for
This was the best video on bars i have seen nicely done thank you very detailed from stat to finish
I agree!!
THE most detailed installation video on TH-cam, nothing close!
* I still ain’t doing it! 😂😂
Great guideline to installing bars… watched twice then used video to help when I needed it…bars look great and feel even better.
Thank you so very much for explaining how to connect the heated grips from right to left side. I’ve watched several videos but yours has helped me out the most.
Man you saved me so much 💰💵💰💵 I’m no mechanic by any stretch of the imagination but your DETAILED instruction has me looking good with 12 “ mayhem bars!!!!! You sir are the TRUTH!!!!!!
Great video and great detail it's what we needed to do it our self! Thanks
That's the best install video I've seen so far, very detailed and easy to follow.
Thanks for the video! Looks so simple for you!
Thank you so much for this video! I just installed my bison baggers on my 2016 electraglide police model. I followed this video step by step. Only thing I didn't do is de-pin the wires. I ADVISE ANYONE WHO INSTALLS THESE BARS TO DE-PIN lol IT SUCKED pulling those wires through. Again,I'm so thankful for this video! Thank you KST Kustoms.
I LOVE how my bars look and feel on my bike!
Amazing video. Due to fit mine tomorrow and this has helped a million times over. Glad I chose KST Kustoms!
Thanks KST for your Bison bars and the video. Just finished installing the 12” on my 20 Electra Glide and they look great!
Thank you very much. Best video on bars install by far.
Best how to video I've seen thanks! Just bought these bars for my baby
Thank y'all for the install video. Just added 10 in six bend kicker handlebars on my 2020 Electra Glide Standard. Huge difference. Great attention to detail in the video. Saved me some cash by doing it myself. Plus I learned how to work on my own bike. You guys rock.
The Bison bars are fantastic. Great video. Super helpful.
Thank you for the detailed tutorial, I was able to install the bars because of it. It is much appreciated !
Just used this video to install my 10” kst 6 bend bars on my 2020 streetglide special! Very informative video!! Thanks guys, keep up the great work!
Excellent presentation👍🏼!!..and video quality. Thank you sir.👏🏼
I litterly just finished putting 12s on my 16 ultra you were with me every step of the way . I can not say thank you enough for this video gave me the knowledge I needed to do this job right . Thank you so much
Awesome video and install and like most everyone has been saying great job on the step by step
Definitely the best video on bar swaps, especially the heated factory grips! Thanks
Fantastic video Bret!! Sadly I wasn't able to have you do the install at Daytona, soooo I'm going to do it myself. Lots of great tips on the install. Thanks.
WOW!!! All I can say is THANK YOU for probably the most informative handle bar switch out (2017 Street Glide) available. You helped me save a lot of time & $$$. Thank You!!!
Thank you KST Customs for this very detailed video. I installed your 10" Mayhem bars on my 2019 Elextra glide. I did have to order extentions for right and left controls. Job complete, now have an engine code, hoping to clear and not have to redo TBW again!
Great video! Now I have decided to do it myself and saving tons of $$$.
Great video thanks for the help. Followed step by step and got my bars done with no problem.
Awesome Job, and thank you for helping me decide which handlebars to install on my 19 Street Glide….
The perfect step by step walk through, helped me put install 14s on my 22 SG ST
Just finished up my install with 14 inch Bison Baggers on my 2016 street glide special. Great video, it was like you were in the garage with me. THANK YOU for assisting me, you’re welcome in my garage any day!
Did you have enough brake lines and clutch to run 16s
Great video you made that look about as easy as it gets!! It don’t look like your first bar switch..
Thanks I bought bagger bison bars was really easy to figure out
Hell yeah my man . I just saved over 500$ doing my bars . Thank you so much what a great video
Damn, You did an amazing Job showing how to do this , wish you were close by to do mine. Thanks for the great video
Thank you for posting this, saved me time and most importantly lots of money. Harley store told me I needed about $600 worth of extra parts to put bars with 2 more inches on my 2022 Electra Glide. Your video saved me that money.
Now those are instructions thank you sir an it was too very easy
Watched several times install was fairly easy, thanks for all the short cuts, Bison 12 inch bars look awesome on my 21 SGS
How did you have to route your clutch cable or did you need a clutch cable extension
Nicely done!
Glad I found this video. I watched another notable big harley stuff channel, they took seat, gas tank, clutch and brake lines off and replaced the lines, for 10" apes.
thanks for your guidance on this install and nice meeting you at Bike week 2023. installed mine with no issues
great!
Very nice Instructions for Handle Bar Install I will give you Five Stars Brother, Thank You.
I tip my hat to ya . Dam Informative video you’re the man excellent keep them coming .
Thank you for the help!!
THANK YOU for your tips man.
Great Video Matt
Thanks for the video, will be attempting this weekend.
Successful install, thank you for the detailed video. I never did figure out how to de-pin. I had to cut a solder.
Great video!! I just installed the 10" Mayhem Bagger bars on my 2020 Ultra Limited 3 weeks ago and this video would have been helpful. I struggled with the wires through the bars but I didn't de-pin any of the plugs or remove the OEM harness cover from the throttle side. I am sure doing that would have helped run the wires through.
Thanks for the video, very helpful
Thanks for the tips on these new bikes....missed the red wire for grips.... 5 mins here and all set..👍👍👍👍
The customer service is next level with KST. The Harley dealer wanted 10 hours just to install the handlebars but instead using this awesome video and the amazing support from James at KST I was able to take off my stock bars then send them to KST. They did all the wiring including the install of new grips and set back a ready to mount set of Mayhem Bagger bars. Total time not even trying to go quickly was 3 hours and easy. KST rocks and thank you so much for all the help. The picture of my controls looks great on the website lol
10 hours!? I had to fish the wires through and it still took me less than 2 hours. What a bunch dirt bags
@@DennisH22A not on a faired bike you didn’t.
I agree with Dennis. I put 12” mayhem bars on my Streetglide and literally had it completely done in 2-3 hours. I fished my wires and everything
Best install video. Fought with the wiring a little bit but other than that follow the video and youll have no problems !!! 🤘🏽
My bars will be here tomorrow! cant wait to get them on. Gotta make myself a pulling tool.
The most detailed video on you tube. I mean step by step!
Great way on feeding two wires through the bars
Wanted to also add my thanks. I was struggling to run the 2 wire bundles down and inside the HD Fat Chizeled ape bars. I left it for the day and started doing some research and came across this video. Your explanation of how to get both those wires through did the trick. Much appreciated. Thanks again
awesome man! If you ever want to change bars out again and put some of ours on just give us a shout!
@@kstkustoms1324 I definitely will
Great presentation, I'm going with 12" bars on my 2019 SGS from fat baggers(ez install) lotsa good tips, I'll use your video as my go to for sure...... thanks Marty, from Michigan
Hey Marty did you use the same pull wire set up like he did and is neccessary to de-pin those plugs? I'm from Michigan waiting for my bars.
@@ronwatts268 , I used the new control wires and just the string that came with the bars. I also wired heated grips thru the bars. I didn't depin anything I tried with no success. So with some careful tapping I was able to attach the clips to the end of the string. Not much effort and it went thru. Just don't double stack the clips one on top of the other. Tape them in line. Good luck
Do u know what heated grip extensions they are? Do u have a part number?
best tech. video I have seen thanks
Great video and my hats off to KST for a great install today. I was amazed how quickly the job was completed. Only a group of professionals like KST could have pulled this off. A special thanks to Sid for getting me in the house and keeping Gods word the highest of priorities. For those of you looking to get out of the factory bar business, why look any further than KST for your upgrade needs. Don’t waste your time! Let KST hook you up!!! Thanks again..
Excellent!!!!! Thank You.
Great video! Just installed the Mayhem Bagger 12” bars today on my 2017 SGS. Took about 4 hours. Everything was pretty smooth and easy with the exception of getting the wires through the bar. As others have said the welds inside the bar are very rough and the wires get caught. Definitely expanded my vocabulary working those wires through. 12 gauge copper wire and a little grease is essential! I was definitely intimidated by this project and almost coughed up the cash to have the dealer do it but this video gave me the confidence to do it myself and I am glad it worked out. Love the look and feel of the bars. Should have done this years ago. Thank you!!!
With 12 inch bars do I need to get those electric extensions?
To answer my own question...no I didn't need them
This guy gives super instructions did some 10 inch la choppers twin peaks 1.5 on my 2016 limited low thank you sir but I hate my 10s I want 12 or 14s 10s too damm short
Nicely done
Watched this video while installing 10” six bend kickers on my 22 street glide. Some very different procedures for the cable clutch. No way 12” would have worked with stock clutch cable. It might be a good idea to make an updated video. Took me about 3 hours start to finish. Thanks for the great video and awesome bars.
I have a 2022 CVO Street Glide that I was wondering if the new cable clutch would be long enough because these seem fairly tight/short. I'm glad I caught your comment because now I will purchase the clutch cable and gaskets, and oil and have it ready just in case.... I'm still on the fence about the 10 versus 12-inch handlebars. I'm 5'9" tall but some people might have larger torsos than others. It's such an expensive item to purchase and time-consuming installation that you really only want to do this once and get it right!! Thanks for posting your comments!!
@@chazzcapone exactly i needed to see this info also guess ill go ahead and order my clutch extension
thanks. i just used this video step by step.
Hi,
I really wanted to take a minute to write, and say “Thanks” for your video!
After watching it, I decided that I would be able to tackle it, and placed an order for the 12” 6 Bend Kicker Bars, along with the Wire Extension Harness.
Take care,
Eddie Hugs
Philadelphia, Pa.
Have you out them on yet? Thinking about the 12 inch six bend for mine.
@@zachyount3288 I love them! I also ordered the wire extensions! A quick tip: Use Weed-Wacker Line to thread the wires through the bars!
While having it all apart, I put Heated Grips on it, as well!
If you’re also planning on doing that, you’ll need to cut off about 5/8” on the left end of the bar, otherwise, it’ll be offset because of the rheostat!
Good Luck!
@@edwardaambrosanojr3320 are they above the fairing?
@@zachyount3288 Yes.
Do you have to replace clutch and brake lines on a 2016 Streetglide? I’m going with the 14” bison bars. Thanks
Love your vids, but wish it was in hd. I've changed bars on my 08 Ultra twice. Biggest job is taking the wire ends out of the plugs to do internal wiring. I found if you lub up the harness with Vaseline or similar, they slide through the bars easier.
Installed Bison bars onto my 21 Streetglide using this video…It was super doable and the results are amazing! A couple of things I did for those interested. I used weed eater string and I didn’t de-pin any connectors…. I plumbed both bar ends and switch slots first. Duct taped the wires, connectors, weed eater string and applied a light coat of Vaseline and pulled both the bar end and switch slot electrical wiring simultaneously ensuring I offset the connectors per entry point so I didn’t have a tie finish around the bends etc…. Pretty smooth for what I thought was going to be a tough install.
With 12 inch bars do I need to get those electric extensions?
@@billsteeves2974 I did.
Did you need to get a 4 inch clutch cable extender kit?
Thank you
good show thanks
Fantastic video. I successfully installed 10” bars on my ultra. I’m so glad I didn’t give Harley $500 to install them. Thank you so much!!! Great job!!
Thanks to this video I was able to install my 12" by myself.. took me 5.5 hours though 🤦🏽♂️
great video!!!! helped greatly with my 10” Mayhem install. Thanks!
Did you have and truely need the wire extensions? I talked my local harley dealership. They said all stock wires are long enough for 10in bars. My bars will be delivered to me tomorrow. Please tell me they'll wire up fine without the extension! I don't have heated grips.
@@hdryder1568 no, I did not need any extensions for my 10” bars! there is plenty of wire there, you just need to remove the connections from the plastic tree they are in
@@scott_0492 good deal thanks for the response! I'll be installing my bars this weekend!
@@hdryder1568 lol pack extra patience for running the wiring inside the bars, it can be nerve racking...
@@scott_0492 I got a 6 pack on ice to ease the frustration lol
Going to give it a shot… rolling 🎲
dan nicosia ..its fixed . when I did this ... our friend didn't say disconnect the battery ..hmmm its ok my fault .I did not disconnect the battery and it was crazy fearful ..nothing worked but the radio and head lights were on and i had no control over anything .. and it wont start ..no worries your 5 amp fuse blew ..replace and rejoice ..everything is fine now ..go ride ..
Great video, would love to put some custom bars on my street gilde. Was thinking to have my local harleydavsion dealer do the install. Depending on cost . Also concerned about warranty if I do it myself.
I never depinned the connectors, I would tape with electrical tape and throw a little grease on the end of it and rub down the tape. All of my connectors came through easy
Very nice, thank you.
If the new handlebars had rounded corners would I need to take the switch connectors apart?
I just noticed the man cave sign in the corner at the end of the video. I have one just like that. Purchased at Old Time Pottery in Foley, Alabama while on vacation down there
Bought 14 straight jackets from you guys that say they are for a 07 road king cvo with hydraulic clutch, but the 1 1/4 bar interferes with both brake and clutch resivors.
What would be different on 2013 street glide install? Thank you for all your help
You guys should post this video for road kings since we don’t have to take off the front fairing . Would really help
thanks for the feedback. We are working to do that.
I completely agree with every commenter before me, this vid and others gave me the confidence to do my own bars and save from going to the local HD shop, going to order my Bison bars from you, but for a 2023 RGS, do I need to get that Krazy Klamp you guys sell, if I get the torque per pound right and also would you recommend changing out bushings....every video I have watched someone is doing something different, so just wanted your opinion.
Hey man excellent video! Gonna order some KST 16’s today. Can I run a 16” with using cable extensions only on 14 street glide?
Hey I bought the mayhem 12 bars for my 16 street glide and when I try to attach my switch housing that have the run switch on it won’t snap in place
Just did Patriot bars on my 23' SG special and found out I had to modify the inner fairing when using aluminum risers as well as the lower plate by the ignition switch below the inner fairing. It did not want to seat correctly without doing that.
Hey man. We did have a batch we ran into while we were at Daytona that we had to do the same thing to. We made them about 1/4” too narrow at the base. Good job working thru it!
Brett
Great job there! Question 🙋🏻♂️. I’m going for 14inch factory 47 assault handlebars on my 2021 StreetGlide Special. Do you think it will block the stock mirrors? I’m 6.1 ft if that helps
Any videos for older harley glides 90s-2008
Do you have to extend the wires on a 2016 SG for 10 inch bars
Yeah my 14 bars are just 👌 think I'll give this a miss 🤔😉😎
Sounds good pal
I’m getting my bars installed at HD.. I don’t have heated grips but I might want em later on... what do you suggest I do?
I check your last video
Will you make these for the 2021 Street glide?? I been looking for new bars I love yours but I don't think they work on the 2021 models
How high can the bars be before you have to change the brake and clutch cable?
Installed my bars tonight and have no power to my right controls. Triple checked all plugs and pins and they are all good. Everything is connected and I'm throwing a bunch of codes. Any tips or help would be greatly appreciated.
Can you use some process with 2013 and older with throttle by wire?
I noticed you relocated the stock mirrors. How did you do that?
Do you do these bars in stock height with less pull back?
Are new Poly bushings needed / suggested with a new Electra Glide Standard and these 12" Mayhems?
Do I need the wire extensions when in installing
khrome Werks 300519 bars? They are two inches taller and 2 inches further back. Tks
What helmet is that guy wearing on the white road glide ?