I was looking for mouse, case, fans, CPU cooler in separate occasions each time I search for one of these your videos pop up and I must say your videos did help alot and I have good idea now about what parts should I look for. Subscribed
@@TheProvokedPrawn ok i am installing it now but the problem is the backplate is not fitting behind the motherboard, my motherboard is X570 Auros master motherboard
Bruh, You make one of the nice videos on PC keep up the good work also (as you also showed in the video) to be honest, i would not use QL or LL fans on radiator, because from science perspective, they have very poor mm/H2O static pressure, low CFM, have noisy motors and are prone to falling apart + there is a gap at the edge of fan, which is a point of leak for static pressure, causing the super low static pressure to not even properly penetrate the radiators. Its my recommendation to use silicone transparent gasket, so that air flow can be sealed and it moves through radiator only, also bleeding RGB more or use ML on top(outside case fan mount) to pull air while QL provides the flow guidance, but then its painful as you have to adjust RPM accordingly
This white LCD upgrade kit is beautiful. I currently have a black one installed in my 12th Gen Intel build. Currently building a secondary PC and just bought this white upgrade kit, waiting for delivery. Also I'm waiting for royal mail to deliver my motherboard I ordered on eBay the only component I need and royal mail take so long :(
Hi there! I love your videos they are extremely helpful:))) i am going to build my first pc soon using this cooler however im a little confused on installing the fans to the radiator. At 7:50 the cables shown were on the top and you said that it was demonstrating a mistake, should i ensure the cables are at the bottom? Thank you!!
Great Video! Would you be able to show a custom fan cure in iCue? I have a very similar set up and my fans sound like they’re gonna take off when I game 😂
It would be great if you could. I have them all set to quiet but as soon as I launch Warzone it seems to get very loud. While gaming my GPU usually sits around 60°. I will have to check my CPU. If you could show us on this build that would be great 👍🏻
@@TheProvokedPrawn i have the 5000d with 10ql and 3ml in the push pull config all white with the elite capellix just like you its hard to keep that many fans quiet!
I have exact same controller we my AIO rest of fans won’t power on when connect to controller does this mean a fault with RGB HUB RGB works just no power or spinning fans anything u suggest I do thanks
I discovered this LED upgrade at the shopping app I was thinking to upgrade my Corsair 100i elite LED to this would be cool I have been using the all in one liquid cooler about probably half a year or 1 year already in between there.
I don't see how the QL series is an upgrade from ML series? I too had once contemplated this "alternative" but the loss of CFM, RPM and gain of 1db in the QL didn't justify the purchase.
Great video but does it matter if you use aio pump header of an header because I have heard that there are times where u can plug the pump fan into the pump header and the system doesn’t post because there needs to be a fan connected to a cpu fan header do I just get a y splitter for the radiator fans and connect them to that and connect that to the cpu fan header?
Did you by any chance update the Commander Core / CPU Cooler firmware BEFORE installing the LCD kit? It doesn't seem like you did in this video, but there is a warning on the LCD Upgrade Kit that you did not mention - Planning to do a similar build later this week and want confirmation; If it means I don't have to install the base CPU Cooler, then update the firmware, THEN install the upgrade kit then it makes my life easier!
I was able to plug the commander core into a different computer before actually installing my cpu cooler and there WAS a firmware update... I would recommend doing this as well, or if you can't, install the cpu cooler without the LCD upgrade first, update the firmware, then install the LCD upgrade
I have the same case and almost the same setup. Mine is going to be AMD AM5 build, but I bought cheaper LED ram than the vengeance, but same AIO and fans. Hopefully everything will sync up. Also running a white RTX360.
I'm think of building a PC in a couple of years but currently just trying to figure some things out. Would 6 ql120 fans on a h150I (acting as push-pull) be fine or even fit? The case I have in mind would be the Corsair black 5000t (hope the price goes down in that time). The idea would be to have 13 ql120 fans (3 front, 3 side, 6 radiator p/p and 1 exhaust - if that's even feasible).
Hey, maybe a little late but have been thinking of getting myself this though my current pump heads rgb is not working, would getting this and swapping out the rgb module fix it or will still have no rgb or anything after switching it?
Is it possible to remove the LCD module from a H150i Elite set ? I mean... Not talking about the upgrade kit but getting the whole set... I know it sounds crazy absurd but disregarding waste of money and given the fact it's nearly impossible to find the new AM4 retention bracket atm, I'm considering getting a whole set, remove the LCD and use it with my H150i elite Capellix radiator/pump, along with the new AM4 Corsair brackets given the fact of how problematic the standard one can be when installing the LCD module. In the end, I'd be left with a spare radiator/pump and the "old" ML fans that came with my Elite Capellix since I'd replace them with the new ones that come with the Elite LCD set. Is it possible to do that ?
How is the airflow working in your case as far as heat disapating? I have a 360 on the front pulling cold air over my radiator and then exhausting 2 fans on top and one in the rear. My case runs hot with my AMD 5700 and AMD 6700XT GPU. I may need to remove the CPU AIO and re-apply the thermal grease again. I have the same Corsair setup and case as you do
@@A-Fax-Machinefor the Corsair 4000d airflow the h115i elite capillix will not fit RAM big as "Corsair vengeance and dominator" too "tall". Unless if you put in the h115i in front of the case, but kind ruins the aesthetic. For the 5000d airflow I think will fit normally. The 4000d is more "compact".
Since you upgraded to the lcd right away before updating the firmware, did you get the red triangle and flashing red rgb on all your fans as soon as you turned on the pc like i have?
@@fuyukbuyuk the problem was the pump from the AIO wasn’t turning on and cooling the CPU. Which is why i got the error on the screen, and the fans flashing red. So what i did was put the old rgb plate back on the pump and it worked. Once i got my PC setup I downloaded the iCue software from corsair website and updated the firmware for the commander core, i believe. Then once it was updated i swapped it back to the lcd screen and it worked
Sad that I went and got the cooler and upgrade kit and was just greeted with a red triangle and iCue isn't even detecting the lcd but is detecting the commander core :(
I thought it was pronouned ker-pell-icks, but in your videos you pronounce it cah-per-licks / cah-puh-licks. Is there an official pronunciation? I've looked at Corsair's help videos and they use the former pronunciation, but I'm not too sure.
I was looking for mouse, case, fans, CPU cooler in separate occasions each time I search for one of these your videos pop up and I must say your videos did help alot and I have good idea now about what parts should I look for. Subscribed
I aim to please
@@TheProvokedPrawn cool video i was looking for things for my bday so ill get this two more sticks of ram and probably a rgb aio tube cover
nice to see its compatible for the H100i may have to invest in one
I just ordered this fan, the link you put down in your description. Super excited!
Hope you like it!
@@TheProvokedPrawn ok i am installing it now but the problem is the backplate is not fitting behind the motherboard, my motherboard is X570 Auros master motherboard
The ice version looks awesome, i think thats the one im gonna get because it looks cool even when all the lights on it are off!
Now THIS is a nice combo.
Yeah it is.
Bruh, You make one of the nice videos on PC
keep up the good work
also (as you also showed in the video)
to be honest, i would not use QL or LL fans on radiator, because from science perspective, they have very poor mm/H2O static pressure, low CFM, have noisy motors and are prone to falling apart + there is a gap at the edge of fan, which is a point of leak for static pressure, causing the super low static pressure to not even properly penetrate the radiators.
Its my recommendation to use silicone transparent gasket, so that air flow can be sealed and it moves through radiator only, also bleeding RGB more
or use ML on top(outside case fan mount) to pull air while QL provides the flow guidance, but then its painful as you have to adjust RPM accordingly
This white LCD upgrade kit is beautiful. I currently have a black one installed in my 12th Gen Intel build. Currently building a secondary PC and just bought this white upgrade kit, waiting for delivery. Also I'm waiting for royal mail to deliver my motherboard I ordered on eBay the only component I need and royal mail take so long :(
i want to buy the h100i for my 12th gen, are the screws for lga 1700 in the box or do i have to buy them extra
Have you thought about flipping over the front fans so it blows into the case?
16:14 my aio itself has 3/4 screws broken, will it still be able to hold the lcd?
Hi there! I love your videos they are extremely helpful:))) i am going to build my first pc soon using this cooler however im a little confused on installing the fans to the radiator. At 7:50 the cables shown were on the top and you said that it was demonstrating a mistake, should i ensure the cables are at the bottom? Thank you!!
Question where does the single wire plug into that's paired with the SATA power cable
Great Video! Would you be able to show a custom fan cure in iCue? I have a very similar set up and my fans sound like they’re gonna take off when I game 😂
People keep asking this so I should probably do it at some point. Have you tried setting your fans to quiet by any chance?
It would be great if you could. I have them all set to quiet but as soon as I launch Warzone it seems to get very loud. While gaming my GPU usually sits around 60°. I will have to check my CPU. If you could show us on this build that would be great 👍🏻
@@TheProvokedPrawn i have the 5000d with 10ql and 3ml in the push pull config all white with the elite capellix just like you its hard to keep that many fans quiet!
I have exact same controller we my AIO rest of fans won’t power on when connect to controller does this mean a fault with RGB HUB RGB works just no power or spinning fans anything u suggest I do thanks
I discovered this LED upgrade at the shopping app I was thinking to upgrade my Corsair 100i elite LED to this would be cool I have been using the all in one liquid cooler about probably half a year or 1 year already in between there.
I don't see how the QL series is an upgrade from ML series? I too had once contemplated this "alternative" but the loss of CFM, RPM and gain of 1db in the QL didn't justify the purchase.
Best video and contain all information that I was looking for. Thank you so much
You're welcome. Hope you enjoyed enough to sub
What do I need to run Lian SL fans with the Corsair H100 cooler don’t like my Sp 120 fans nice video btw maté very detailed
This might help th-cam.com/video/0wPi_zNzKF4/w-d-xo.html
@@TheProvokedPrawn thank you appreciate it 👍
Great video but does it matter if you use aio pump header of an header because I have heard that there are times where u can plug the pump fan into the pump header and the system doesn’t post because there needs to be a fan connected to a cpu fan header do I just get a y splitter for the radiator fans and connect them to that and connect that to the cpu fan header?
th-cam.com/video/fz_mL7nhelo/w-d-xo.html
Hey can I do the lcd screen mod on a h100i elite (not - capellix)?
I got corsair 4000D airflow. Will it be compatible for this? I also got AMD motherboard
So I need to get a separate kit for the 1700? I just bought the h100i capellix elite dt and it says it comes with everything for lag 1700
Did you by any chance update the Commander Core / CPU Cooler firmware BEFORE installing the LCD kit? It doesn't seem like you did in this video, but there is a warning on the LCD Upgrade Kit that you did not mention - Planning to do a similar build later this week and want confirmation; If it means I don't have to install the base CPU Cooler, then update the firmware, THEN install the upgrade kit then it makes my life easier!
I didn't
I wonder the same thing....pls tell me how you installed it.
"i didn't" ? ....updated the firmware before or what ?
@@kristerottosson5634 I didn't update it before hand. If you can then that's great but with a new build that's a pita
I was able to plug the commander core into a different computer before actually installing my cpu cooler and there WAS a firmware update... I would recommend doing this as well, or if you can't, install the cpu cooler without the LCD upgrade first, update the firmware, then install the LCD upgrade
I have the same case and almost the same setup. Mine is going to be AMD AM5 build, but I bought cheaper LED ram than the vengeance, but same AIO and fans. Hopefully everything will sync up. Also running a white RTX360.
my corsair H100i ELITE didn't come with a commander core. Is that going to be an issue?
is that transparent plastic square housing around the LCD display supposed to stay there?
does it work witht he h115?
hi, great vid. Does that plastic block around the cooler come off?
I'm think of building a PC in a couple of years but currently just trying to figure some things out. Would 6 ql120 fans on a h150I (acting as push-pull) be fine or even fit? The case I have in mind would be the Corsair black 5000t (hope the price goes down in that time). The idea would be to have 13 ql120 fans (3 front, 3 side, 6 radiator p/p and 1 exhaust - if that's even feasible).
Push pull isn't essential and not every case can manage it, so you need to keep that in mind.
Hey, maybe a little late but have been thinking of getting myself this though my current pump heads rgb is not working, would getting this and swapping out the rgb module fix it or will still have no rgb or anything after switching it?
Does this work with the Corsair Hydro Series H100i RGB PLATINUM
was it worth it perfomance wise to replace the stock fans
Hey once i get this cooler will it come with everything that has been shown in this video?
No. It's three separate things. Like the title says 🤣😉
How are you controlling your Founders Edition Graphics card with icue?
I did not see alan key in my h150 :/
Is it possible to remove the LCD module from a H150i Elite set ? I mean... Not talking about the upgrade kit but getting the whole set... I know it sounds crazy absurd but disregarding waste of money and given the fact it's nearly impossible to find the new AM4 retention bracket atm, I'm considering getting a whole set, remove the LCD and use it with my H150i elite Capellix radiator/pump, along with the new AM4 Corsair brackets given the fact of how problematic the standard one can be when installing the LCD module. In the end, I'd be left with a spare radiator/pump and the "old" ML fans that came with my Elite Capellix since I'd replace them with the new ones that come with the Elite LCD set. Is it possible to do that ?
Will the Commander Core work with non Corsair fans? Thanks for taking the time to create great content.
I've never tried it so I wouldn't like to say
They do work with any fan but if the fan does have rgb, that will need an adapter for it to light up.
What's the difference between ll fans and ql fans.i have 6xll120 fans.thx
th-cam.com/video/X4-tx9mn1Tg/w-d-xo.html
How is the airflow working in your case as far as heat disapating? I have a 360 on the front pulling cold air over my radiator and then exhausting 2 fans on top and one in the rear. My case runs hot with my AMD 5700 and AMD 6700XT GPU. I may need to remove the CPU AIO and re-apply the thermal grease again. I have the same Corsair setup and case as you do
This is a better setup tbh. I'm going to do a comparison video Vs the AF120 fans soon and I'll put benchmarks and temps in that
Can the Corsair H115i Elite Cappelix (280mm version of the AIO in the video) also fit with the RAM sticks in the video, in the same case?
I'm afraid I don't know. I haven't tried. The specs seem to say so but that's all I know.
@@TheProvokedPrawn Ok, thank you :)
@@A-Fax-Machinefor the Corsair 4000d airflow the h115i elite capillix will not fit RAM big as "Corsair vengeance and dominator" too "tall". Unless if you put in the h115i in front of the case, but kind ruins the aesthetic.
For the 5000d airflow I think will fit normally.
The 4000d is more "compact".
no it won't tempted to sell my h115 and buying the h100i to get rgb ram
i wish i was able to get the elite cappelix instead of the H100i, it came out a couple days after i installed my AIO :(
Same.
Since you upgraded to the lcd right away before updating the firmware, did you get the red triangle and flashing red rgb on all your fans as soon as you turned on the pc like i have?
did you fixed and if you fixed how did you fix i have the same problem
@@fuyukbuyuk the problem was the pump from the AIO wasn’t turning on and cooling the CPU. Which is why i got the error on the screen, and the fans flashing red. So what i did was put the old rgb plate back on the pump and it worked. Once i got my PC setup I downloaded the iCue software from corsair website and updated the firmware for the commander core, i believe. Then once it was updated i swapped it back to the lcd screen and it worked
Would you recommend a 360 aio for the CPU on the side or the top of a 5000d?
It’s down to preference
Sad that I went and got the cooler and upgrade kit and was just greeted with a red triangle and iCue isn't even detecting the lcd but is detecting the commander core :(
Any firmware updates for the commander core? Uninstall, redownload and reinstall iCue would be my suggestion
@@TheProvokedPrawn Done it all tbh, none work so I just took it back :P
@@pandecoco15 I experienced the same issue but found it was the usb header not seated correctly. And have lived happily ever after
Thank you 🎉
You're welcome.
Is CPU package just CPU temp?
That's overall temp
See I don’t have the controller and mine didn’t work
Yo chummmm Any.........problems, wiiiiith you LCD.....upgrade kit?
No
So i got this 2 fan radiator from someone but he didnt give me the commander core so the pump doesnt actually work does any one know a fix for this?
I thought it was pronouned ker-pell-icks, but in your videos you pronounce it cah-per-licks / cah-puh-licks.
Is there an official pronunciation? I've looked at Corsair's help videos and they use the former pronunciation, but I'm not too sure.
I'm often wrong with pronunciation.
@@TheProvokedPrawn Your voice is ASMR though
@@22oreos hopefully people will forgive my errors if I pleasure them enough with my voice
i dont think ql120 are not good for radiators, they weak fans more for looks
They're Perfectly fine
Why
Why what
Because why not?
Here
Thanks for watching
No tenes idea de la suerte que tienes de no vivir en latinoamérica.