@@zeeshankhan-ir9ug There are not 3D planes, only 2D or 3D sketches. You always have to use a plane for 2D sketches (RECOMMENDED) or use a 3D sketch that doesn't need any planes. As a beginner, do NOT touch 3D sketches. Come on my website and watch the webinar, you need it, link in the description Zeeshan
I know how to use SOLIDWORKS. I already made several engineering designs. But i don't get the freelancing work. Can you help me to get freelance work. I will do the work and you can take your commission.
I have been teaching myself solid works for one and a half years. Your videos help help me out tremendously. It would really be great if you would continue this line of teaching on a regular basis to carry us all the way through to at least professional level. Thank you so much for your great style of teaching. However it would help if you could slow down your speech, as it would give us a little more time to absorb what you are saying. I’m sure we are in no hurry to skip over because we didn’t understand. Thank you so much keep up the good work
Lance, it was indeed constructive feedback I was looking for. Thank you for that. I would certainly reduce the pace of my speech in the next episode. Also, since it seems that you have been consistent with your learning I think you would really benefit from my 1 hour-ish webinar which covers the 10 common mistakes that you are most probably making on your day-to-day practice with SolidWorks. These mistakes are caused by the bad habits self-learners pick. And after that, you *get free access to my mini-course*. bit.ly/SolidWorksCoursePro101
I have learned SolidWorks 20 years ago when, there were no videos on it, just by running the software. It is so common sense, the software explains itself to you. SolidWorks has revolutionized CAD. And beat pro Engineer, that was the most used CAD at the time. But it was incredibly hard to learn! You needed to sift through the Pro. Engineer Bible to find what you were looking for. Literally, a 2000-page reference book. It was a complete waste of time. SolidWorks has saved my sanity and my carrier!
I'm a student in mechanical engineering. In the past, I've been using PTC Creo (3years) and a little bit of Catia (a few months). I had an interview for an internship today. The recruiter liked my profile, and he offered me a technical test on solidworks that will last 2 hours next week (12/13/2022). I will devote my entire free time to your tutorial. I will update my situation here ! Thank you for your amazing work. Greetings from France !
Watching your videos is my new morning routine at work since being given access to Solidworks. Out of the 20 or so different channels I've watched, your ability to teach and explain in simple terms far exceeds the others.
In college now using all CAD programs. Transitioning from being a former welder and machinist. Thank you for your videos. They are a great supplemental way to add to my learning that the instructors do not necessarily cover.
I've got a paid course explaining everything in depth, but this might even be better. Your videos are top tier for people seriously consider doing something with CAD. Skill takes practice, slowly
Great information. I recently started working for an engineering company called Fives Lund LLC. These videos provide so much help and understanding. Thank you sir.
Thank you for taking the time to make this video. I’ve never discovered solid, works without your channel. I hope to make it a new hobby and maybe eventually start making money.
I am going to school and they are teaching this Aryan, I am an absolute beginner, Thank you for teaching this ! I am getting a headache in school because the help is not much .
I like your comment in the webinar video "Imagine you go to this great school that has all of these classes, but nothing is organized." That was my experience at Gulf Coast State College. They have a lot of great stuff but, no one could effectively teach it or organize it for it to be taught effectively, and that is why I am here now learning from the beginning... Again.
Yes, it is. Organized to spread the lesson across a semester or quarter. Organized to inject a quiz, midterm and final exam. In reality, it can be learned in 8 hrs x 3 days in a "pay" solidworks class. However, even those classes just "follows a script" and if you fall behind because you clicked the wrong thing, closed your window, or wasted time changing the "color" of your interface screen...you will miss a few details. Ryan's video series is probably the best "free" stuff you can find on youtube, but it's up to yourself to figure out which ones to do first and be aggressive/tenacious to absolutely understand each micro step and click to solving a problem. No shortcuts.
I have been through a lot of videos about solidworks but believe me this is "the best" learning video I have ever watched...! Thank you soo much for your efforts man...! Appreciate that❤️👍
i'm not even all the way thrue the first episode but this is amazing. you explain so clearly and even put a bit of humor in it. i love it. thanks a lot and keep the good work coming greetings from the Netherlands.
You are the best! Just subscribed to your channel! These type of tutorials is what I’m looking for. Thank you so much for putting the efforts on making these tutorial videos in such a detailed and a very well explanation for us viewers to understand. Keep up the good work!
I love the content so far as I’m learning or looking to learn some sort of CAD software that will print to a 3-D printer. I’m trying to find a tutorial preferably in solid works that shows you how to design a simple shape that follows you through to printing the part on a 3D printer.
Thank you for you service’s dude seriously every other video talking about cads is some monotoned voice over a screen play we need more entertaining teachers with enthusiasm for what they teach🙏
incredible possibilities to those who master it. I am almost done with my first track, but there is so much more to discover and learn. TNice tutorials
WOW, a tutorial that actually starts at ground level! Thank you for this video. Maybe you should make a tutorial on how make a tutorial, for all those other people who claim to have a SW beginner level tutorial. LOL
Much useful information, I really appriciate it! Let me also add that this video could be better without the ubiquitous sound effects. Also, principally the whole screen ought to be visible all the time, to zoom in on something (that is visible already in their details) takes away the overall view without compensating benefit.
Hi Ryan, I have learned heaps from your videos and attempted to sign up for the webinar but got an error message - "unable to submit your request. Please contact the website administrator". Appreciate your assistance, thanks Mike
Oh my. Easy sub! Love the passion you’ve put into these tutorials I will be watching the full one over the weekend when I have the time. Thank you so much sir this will make my internship not nearly as stressful!
Great stuff, you are an incredible resource for someone trying to sort out SW fairly quickly... I would be flopping around entirely, still, if it weren't for you.
What an amazing video! I struggled with solid works for a long time and this tutorial was concise and straight to the point. Thank you, definitely earned a sub!
Is the course a paid lifetime or a paid subscription for a certain duration? Planning to invest on myself some good skills and I am an absolute beginner.
I am an absolute beginner in solidworks and would like to learn the basics ! is this playlist good for that ? what version of Solidworks do I need to download ? thank you very much in advance
Aggy, Yes, for starters stick to this playlist because right now your BIGGEST enemy is RANDOM information. You need to stick to a series of sequencial information so you grasp everything step by step after each other without being overwhelmed. More importantly, go to the link below, and watch the webinar for free, if you stick to the end of the webinar, a free download button appears that allows you to download my mini course (still free) and that is magic! Hands down, there is no better source of learning solidworks as absolute beginners on the internet. I hope this helps courses.solidworkstutorials.net/Webinar-Registration?utm=SCPHomeCTA
My boss just paid $25,000 for a westcott pro series plasma table. I tried telling him it's going to take a lot of learning. I know he doesn't have the time ad it will fall on me. I think it came with a design 2 cut app but I know it's going to take more than that. I was hoping your course would help but it looks like I'll need the SOLIDWORKS app ?
yes you do, but through my course you have the opportunity to purchase a student licence very cheap. But the downside to that is that it cannot be used for commercial use. Either way you do need the SW licence
Subbed and liked. 10/10 tutorial honestly. It's one thing to know a subject and it's another thing to explaing it to others. I have a bit of experience with Blender and Illustrator so it's obviously easier this way but regardless this is gold.
Thank you very much. If you find this interesting and useful for you, I cannot stress this enough, go to the link below, and watch the webinar for free, if you stick to the end of the webinar, a free download button appears that allows you to download my mini-course (still free) and that is magic! Hands down, there is no better source of learning Solidworks as absolute beginners on the internet. I hope this helps courses.solidworkstutorials.net/Webinar-Registration?utm=SCPHomeCTA
@@with-Aryan Watched the webinar. Really amazing stuff, sad thing that I'm in a 3rd world country / financial situation where I can't afford your full course. I can tell by the webinar that it's an amazingly detailed and tought out course, and you really know how to logically build learning material.
Hey, could you explain the importance of the Origin point placement in relation to a part? Like when you created the box in this tutorial and dimensioned it (10x10), the Origin point is no longer on the line, but around the middle of the part. Should I start drawing the square with the Origin point at one of the Entity End Points, rather than the Entity Line itself? Therefore if I dimension the square, it will be fixed to the corner Entity End Point etc. Hope this makes sense. I struggle a little with 3D space (I'm a deep learner) in other applications like Adobe After Effects as well and need to get my head around it. I get what the Origin point is, just its placement importance on a part. Cheers
This is a great question. The importance of using the origin point is huge. And you have to bring the origin into account because initially, that's the only defined coordinate that is fixed in a fluid space you have. However, I wouldn't fix a corner of my square to it rather I place the square equally around the origin. i.e. if you connect the four corners of your square with lateral lines together, the junction of those two lines, is where you place your origin. The reason is, by doing that, you are placing your future model in the center of the designing space, and in the worst-case scenario, you set 2 of the 3 initial planes i.e. Front, Top and Right in the middle of your model. These planes can later be used for Mirroring or cutting your model in half or looking at the cross-section exactly in half. Now if you want to take it a step further and extrude your square also Mid-Plane instead of Blind, then you have all 3 planes cutting your model in half. Which gives you much more flexibility in your future steps, which cuts your modeling time enormously and this is one of the subtle techniques that separates a pro from a beginner.
@@with-Aryan Thanks Aryan that's a great answer. I did a basic google search for this and just couldn't find a definitive answer. I get it now finally! I'm going to have a look at your courses as you are very good at teaching. Cheers. Don
Hi! Thanks a lot for your videos, I am new to the software and they have been really helpful :) I have a small and maybe silly question: when I am drawing any feature (line, circle, arc) I can not see the dashed line relating this with the origin or any other created feature. How can I activate that when I am in "sketch"? Thanks a lot in advance for your help!
Really helpfull 👍 nice video ryan. really like how you explain every step so easy, i dont really understand how to teach my junior. But this video really help me how to teach, i will try to show this to my junior so we can study solidwork for basic and learn some english 😁. Sometimes when we have more learning source its so difficult to focus
I have wanting to learn Solidworks for a long time. I have taken courses a few years ago and learned nothing. The teacher was talking so over my head I got lost. I just stumbled upon your youtube channel. The software is so expensive for me to learn. How would you suggest someone like me at my age 60 to learn? i am reinventing myself.
Hi Pete, if you feel lost, it's because what the teacher was teaching was not sequential so you couldn't make sense of it. Once you can't make sense of a subject, you won't understand it. What you should do is to learn it sequentially and you'll realize 60 is the new 40 as there are more than 30 people over 75+ in my course right now. So don't get dishearted. Have you watched my webinar? if not, that's the next thing you shoould do, linke is the description section of this video
How do I get the BLUE Origin symbol to appear or STAY on the screen?. I only get the RED one when beginning a sketch but it disappears when finishing the sketch when going to features.
Look for the EYE icon in the top center of your screen. Open that, and click on the Origin which looks like a XY coordinate in black. If you don't know which icon I'm talking about, you can do the same, by going to View> Hide/Show> Origin
Hey man! Thanks for doing this! This is really helpful! I have been wanting to start a career in 3d design for a while now. I am confident that your course will help me to do that!
I want to take your more deyailed class but i can not figure out how to reach it. Even with your red flashing lines. What i see is not what you seem to preent Please provide urls in the comment section Pointing to your site with clealy identified class I, 2, 3 Than you kindly
How did you allow the dimensions to appear in the middle of the dimension line, I changed my document options to ANSI like you did in the video? Also thank you for this video series!
courses.solidworkstutorials.net/ The best way would be to check my page and read what's in it. I highly recommend you that course because I have put my whole heart into making it and people absolutely love it
I learned to fell tress on a chainsaw before I used an axe to down a tree. But I know what your mean. Maybe say you would learn to pilot a plane before a helicopter I think you have to have your fixed wing before you can learn helicopter :)
@@with-Aryan its hard to say without a screen grab. mine is the community edition its flat windows 10 style. your part, assembly and drawing are yellow and sort of 3d and in the middle of the screen, mine is blue on the left of screen and vertical it has new, new isometric part, iso metric sheet metal, iso metric assembly, iso metric draft, iso metric weldment. all of my graphics in the top ribbon are different to yours the look is different so i cant follow your tutorials. im a bit slow and need to be fed every little step.
"...just after a quick solution, and get hang of it...". That sounds like my millenial engineering coworker who just crowbars his autocad knowledge to create solidworks geometry. You know take complex 2D polygon from legacy autocad. Flatten and delete the overlapping lines and entities. Then get dimensions by "clicking" on thousands of stupid entities, with "questionable" accuracy on their original locations. Then adds a few changes to the polygon, and click on about a hundred individual solidwork constraints. Then finally does a "single" extrude operation. Finish. He is either "not patient" enough to learn the basics step by step, or "too afraid for his job" to take time off from "non-engineering" documentation or customer service to please his manager. He doesn't "get it" (invest some time, learn the basics, be able to do solidworks confidently, quickly and without question). I have given up hope trying to help him. This "engineer" will be "forever" second guessing his ability and speed to be able to make a "useable" solid model to be ultimately used for machining a part or a full assembly for machine design. Do not become this type of "worker". I was going to say engineer, but you don't need a degree to do solidworks. In fact, best people to learn this are machinists, who are always "free handing" fixtures and jigs.
Yes, 3ds Max is a powerful 3D modeling, animation, and rendering software that is widely used in various industries such as architecture, product design, film and video game production, and more.
New Update: My 1 Hour Free beginner Course >> bit.ly/SCPMiniSeries
for designing of machine use 2D OR 3D plane ? sorry to ask but I'm beginner
@@zeeshankhan-ir9ug There are not 3D planes, only 2D or 3D sketches. You always have to use a plane for 2D sketches (RECOMMENDED) or use a 3D sketch that doesn't need any planes. As a beginner, do NOT touch 3D sketches. Come on my website and watch the webinar, you need it, link in the description Zeeshan
@@with-Aryan thank you for the reply you give me much information
You deserve an award
I know how to use SOLIDWORKS. I already made several engineering designs. But i don't get the freelancing work. Can you help me to get freelance work. I will do the work and you can take your commission.
I will upload Part 2 in a couple of days soon... Sorry for cutting the video half-way. The edit is taking longer than planned...
i cant believe this is free education. keep it up
I have been teaching myself solid works for one and a half years. Your videos help help me out tremendously. It would really be great if you would continue this line of teaching on a regular basis to carry us all the way through to at least professional level. Thank you so much for your great style of teaching. However it would help if you could slow down your speech, as it would give us a little more time to absorb what you are saying. I’m sure we are in no hurry to skip over because we didn’t understand. Thank you so much keep up the good work
Lance, it was indeed constructive feedback I was looking for. Thank you for that. I would certainly reduce the pace of my speech in the next episode. Also, since it seems that you have been consistent with your learning I think you would really benefit from my 1 hour-ish webinar which covers the 10 common mistakes that you are most probably making on your day-to-day practice with SolidWorks. These mistakes are caused by the bad habits self-learners pick. And after that, you *get free access to my mini-course*. bit.ly/SolidWorksCoursePro101
Also you can slow down playback speed to .75, .50, and even .25
I have learned SolidWorks 20 years ago when, there were no videos on it, just by running the software.
It is so common sense, the software explains itself to you.
SolidWorks has revolutionized CAD.
And beat pro Engineer, that was the most used CAD at the time.
But it was incredibly hard to learn!
You needed to sift through the Pro. Engineer Bible to find what you were looking for.
Literally, a 2000-page reference book.
It was a complete waste of time.
SolidWorks has saved my sanity and my carrier!
I'm a student in mechanical engineering. In the past, I've been using PTC Creo (3years) and a little bit of Catia (a few months).
I had an interview for an internship today. The recruiter liked my profile, and he offered me a technical test on solidworks that will last 2 hours next week (12/13/2022). I will devote my entire free time to your tutorial. I will update my situation here !
Thank you for your amazing work.
Greetings from France !
Best of luck, you must check my course as well
Heyyy bro, what's the update??? did you get the internship?
Watching your videos is my new morning routine at work since being given access to Solidworks. Out of the 20 or so different channels I've watched, your ability to teach and explain in simple terms far exceeds the others.
you made my day. Have you checked out my course yet? Imagine what would that be like if this is only my free content
@@with-Aryan hello there, is this course helpful for pytha drafting?? Thanks
In college now using all CAD programs. Transitioning from being a former welder and machinist. Thank you for your videos. They are a great supplemental way to add to my learning that the instructors do not necessarily cover.
you are very welcome! courses.solidworkstutorials.net/
I've got a paid course explaining everything in depth, but this might even be better. Your videos are top tier for people seriously consider doing something with CAD. Skill takes practice, slowly
Great information. I recently started working for an engineering company called Fives Lund LLC. These videos provide so much help and understanding. Thank you sir.
Just in 2 min i understand how precious ur content is plz keep making more SW tips or lessons ...
Thank you!
Thank you for taking the time to make this video. I’ve never discovered solid, works without your channel. I hope to make it a new hobby and maybe eventually start making money.
You can do it! and I'm the best place to learn it! trust me
This is exactly what I need as a mechanical engineer who used Solidworks weekly to design components. Thanks man
dont miss my web
inar
How is Install Solidworks Software? how to download setup files, where in from Internet ..link please
I AM BEGINNER AND I AM DELIGHTED BY THIS VIDEO! THANKS!
YOU ARE VERY WELCOMMEEEE!
I am going to school and they are teaching this Aryan, I am an absolute beginner, Thank you for teaching this ! I am getting a headache in school because the help is not much .
glad I could help. Check the course too
Your way of producing videos is SO FANTASTIC for people with squirrel brains like me. LOL This is so amazing.
I like your comment in the webinar video "Imagine you go to this great school that has all of these classes, but nothing is organized." That was my experience at Gulf Coast State College. They have a lot of great stuff but, no one could effectively teach it or organize it for it to be taught effectively, and that is why I am here now learning from the beginning... Again.
Thanks for sharing! You are in the right place Nicholas
Yes, it is. Organized to spread the lesson across a semester or quarter. Organized to inject a quiz, midterm and final exam. In reality, it can be learned in 8 hrs x 3 days in a "pay" solidworks class. However, even those classes just "follows a script" and if you fall behind because you clicked the wrong thing, closed your window, or wasted time changing the "color" of your interface screen...you will miss a few details. Ryan's video series is probably the best "free" stuff you can find on youtube, but it's up to yourself to figure out which ones to do first and be aggressive/tenacious to absolutely understand each micro step and click to solving a problem. No shortcuts.
another great video from someone who understand what he is doing. thanks
Thanks for watching!
I’m a beginner, but I’m using Solidworks for one of my classes
I have been through a lot of videos about solidworks but believe me this is "the best" learning video I have ever watched...! Thank you soo much for your efforts man...! Appreciate that❤️👍
Thank you! I am glad you liked it. Check the links too
i refuse to believe you
Best solidworks tutorial on TH-cam
Thanks man
i'm not even all the way thrue the first episode but this is amazing. you explain so clearly and even put a bit of humor in it. i love it. thanks a lot and keep the good work coming
greetings from the Netherlands.
You are a great tutor. subscribed. Much thanks
You are the best! Just subscribed to your channel! These type of tutorials is what I’m looking for. Thank you so much for putting the efforts on making these tutorial videos in such a detailed and a very well explanation for us viewers to understand. Keep up the good work!
I love the content so far as I’m learning or looking to learn some sort of CAD software that will print to a 3-D printer. I’m trying to find a tutorial preferably in solid works that shows you how to design a simple shape that follows you through to printing the part on a 3D printer.
thanks, we have an Easter sales just so you know
Thank you for you service’s dude seriously every other video talking about cads is some monotoned voice over a screen play we need more entertaining teachers with enthusiasm for what they teach🙏
Thank you for watching! I'm happy to hear such a great feedback!
incredible possibilities to those who master it. I am almost done with my first track, but there is so much more to discover and learn. TNice tutorials
WOW, a tutorial that actually starts at ground level! Thank you for this video. Maybe you should make a tutorial on how make a tutorial, for all those other people who claim to have a SW beginner level tutorial. LOL
Thanks for the idea!
amazing! Thank you for your great method of teaching. I really hope that my problemS with SolidWorks will be solved by watching your videos.
I am here for you
Much useful information, I really appriciate it! Let me also add that this video could be better without the ubiquitous sound effects. Also, principally the whole screen ought to be visible all the time, to zoom in on something (that is visible already in their details) takes away the overall view without compensating benefit.
How to install Solidworks software in my laptop where do I get Installation setup files??
Loving this video man, you´re great at explaining and very thoroughly. Looking forward to the rest and keep up the good work!
Much appreciated!
you are so helfull man god bless you love from india
Hi Ryan, I have learned heaps from your videos and attempted to sign up for the webinar but got an error message - "unable to submit your request. Please contact the website administrator". Appreciate your assistance, thanks Mike
Good day send me an email for you and I'll get back to you, i'll have a look at the webinar as well.
Oh my. Easy sub! Love the passion you’ve put into these tutorials I will be watching the full one over the weekend when I have the time. Thank you so much sir this will make my internship not nearly as stressful!
thanks for the feedback
Great stuff, you are an incredible resource for someone trying to sort out SW fairly quickly... I would be flopping around entirely, still, if it weren't for you.
What an amazing video! I struggled with solid works for a long time and this tutorial was concise and straight to the point. Thank you, definitely earned a sub!
Then you're gonna love my course. Make sure to check it out
didn't started yet but seems interesting
Is the course a paid lifetime or a paid subscription for a certain duration? Planning to invest on myself some good skills and I am an absolute beginner.
lifetime! this will be an investment that makes you proud, I guarantee you that, just enroll
Sir ....can you explain how to create a die in solidworks it's very useful to us....
I have replied to your question, on your other comment, kindly ask the same question only 1 time, I read each comment.
Great quality video. Thank you for taking the time to make this video. Much appreciated
Glad to hear it
Great tutorial! Thanks for all the effort!
Glad it was helpful!
Great video, and great method of teaching, thanks a lot!!!
How did you remove the tool panels in the beginning? You highlighted them but you did not show the step to remove them.
because I don't want you to put your focus on them now. When it's time, I'll show everything in my course.
THANK YOU FOR GIVING VALUE!
Sir thank you for your great service.
Ryan I was wrong,,,sorry for that comment and now i got the email and got the mini course,,, Thanks ❤️
Don't worry about it, patience is a virtue, my friend ;)
You made this easy to understand. ..
I am glad to hear that!
I am an absolute beginner in solidworks and would like to learn the basics !
is this playlist good for that ?
what version of Solidworks do I need to download ?
thank you very much in advance
Aggy, Yes, for starters stick to this playlist because right now your BIGGEST enemy is RANDOM information. You need to stick to a series of sequencial information so you grasp everything step by step after each other without being overwhelmed.
More importantly, go to the link below, and watch the webinar for free, if you stick to the end of the webinar, a free download button appears that allows you to download my mini course (still free) and that is magic! Hands down, there is no better source of learning solidworks as absolute beginners on the internet. I hope this helps
courses.solidworkstutorials.net/Webinar-Registration?utm=SCPHomeCTA
@@with-Aryan Thank u very much
Please do structured way of learning at least all the basic tools and command (In structure way).
i literally do that in this series
My boss just paid $25,000 for a westcott pro series plasma table. I tried telling him it's going to take a lot of learning. I know he doesn't have the time ad it will fall on me. I think it came with a design 2 cut app but I know it's going to take more than that. I was hoping your course would help but it looks like I'll need the SOLIDWORKS app ?
yes you do, but through my course you have the opportunity to purchase a student licence very cheap. But the downside to that is that it cannot be used for commercial use. Either way you do need the SW licence
Your videos are brilliant, really helpful for beginners..thank you!
You're very welcome!
Subbed and liked. 10/10 tutorial honestly. It's one thing to know a subject and it's another thing to explaing it to others. I have a bit of experience with Blender and Illustrator so it's obviously easier this way but regardless this is gold.
Thank you very much. If you find this interesting and useful for you, I cannot stress this enough, go to the link below, and watch the webinar for free, if you stick to the end of the webinar, a free download button appears that allows you to download my mini-course (still free) and that is magic! Hands down, there is no better source of learning Solidworks as absolute beginners on the internet. I hope this helps
courses.solidworkstutorials.net/Webinar-Registration?utm=SCPHomeCTA
@@with-Aryan Watched the webinar. Really amazing stuff, sad thing that I'm in a 3rd world country / financial situation where I can't afford your full course. I can tell by the webinar that it's an amazingly detailed and tought out course, and you really know how to logically build learning material.
@@zolevokpk Thank you, if you are interested, email me so I plan a installment for you if you wish
Hey, could you explain the importance of the Origin point placement in relation to a part? Like when you created the box in this tutorial and dimensioned it (10x10), the Origin point is no longer on the line, but around the middle of the part.
Should I start drawing the square with the Origin point at one of the Entity End Points, rather than the Entity Line itself? Therefore if I dimension the square, it will be fixed to the corner Entity End Point etc. Hope this makes sense. I struggle a little with 3D space (I'm a deep learner) in other applications like Adobe After Effects as well and need to get my head around it. I get what the Origin point is, just its placement importance on a part. Cheers
This is a great question. The importance of using the origin point is huge. And you have to bring the origin into account because initially, that's the only defined coordinate that is fixed in a fluid space you have. However, I wouldn't fix a corner of my square to it rather I place the square equally around the origin. i.e. if you connect the four corners of your square with lateral lines together, the junction of those two lines, is where you place your origin. The reason is, by doing that, you are placing your future model in the center of the designing space, and in the worst-case scenario, you set 2 of the 3 initial planes i.e. Front, Top and Right in the middle of your model. These planes can later be used for Mirroring or cutting your model in half or looking at the cross-section exactly in half. Now if you want to take it a step further and extrude your square also Mid-Plane instead of Blind, then you have all 3 planes cutting your model in half. Which gives you much more flexibility in your future steps, which cuts your modeling time enormously and this is one of the subtle techniques that separates a pro from a beginner.
@@with-Aryan Thanks Aryan that's a great answer. I did a basic google search for this and just couldn't find a definitive answer. I get it now finally! I'm going to have a look at your courses as you are very good at teaching. Cheers. Don
@@d1o2n4 I tend to give the answers that don't require futher search for my members ;)
Hi! Thanks a lot for your videos, I am new to the software and they have been really helpful :) I have a small and maybe silly question: when I am drawing any feature (line, circle, arc) I can not see the dashed line relating this with the origin or any other created feature. How can I activate that when I am in "sketch"? Thanks a lot in advance for your help!
go to settings and search for the guidelines and activate them. You can search on the search bar on the top right corner fo the settings window
Being proficient in AutoCAD this is very basic but I like it
I made it Basic but glad you liked it
Really helpfull 👍 nice video ryan. really like how you explain every step so easy, i dont really understand how to teach my junior. But this video really help me how to teach, i will try to show this to my junior so we can study solidwork for basic and learn some english 😁. Sometimes when we have more learning source its so difficult to focus
Glad to hear that. Did you check my full online course SolidWorks Course Pro? courses.solidworkstutorials.net/
Hey love your hoodie! What brand is it? Great content btw, thanks!
too old, don't remember! :)
I have wanting to learn Solidworks for a long time. I have taken courses a few years ago and learned nothing. The teacher was talking so over my head I got lost. I just stumbled upon your youtube channel. The software is so expensive for me to learn. How would you suggest someone like me at my age 60 to learn? i am reinventing myself.
Hi Pete, if you feel lost, it's because what the teacher was teaching was not sequential so you couldn't make sense of it. Once you can't make sense of a subject, you won't understand it. What you should do is to learn it sequentially and you'll realize 60 is the new 40 as there are more than 30 people over 75+ in my course right now. So don't get dishearted. Have you watched my webinar? if not, that's the next thing you shoould do, linke is the description section of this video
@@with-Aryan yes i will check it out!!
How do I get the BLUE Origin symbol to appear or STAY on the screen?. I only get the RED one when beginning a sketch but it disappears when finishing the sketch when going to features.
Look for the EYE icon in the top center of your screen. Open that, and click on the Origin which looks like a XY coordinate in black. If you don't know which icon I'm talking about, you can do the same, by going to View> Hide/Show> Origin
Hey man! Thanks for doing this! This is really helpful! I have been wanting to start a career in 3d design for a while now. I am confident that your course will help me to do that!
Glad I could help!
Is this course helpful for pytha drafting?
not really! solidworks is not good for interior designs
I want to take your more deyailed class but i can not figure out how to reach it. Even with your red flashing lines. What i see is not what you seem to preent
Please provide urls in the comment section
Pointing to your site with clealy identified class I, 2, 3
Than you kindly
I was on hoilday, hence the delay, here you go mate courses.solidworkstutorials.net/Webinar-Registration?sl=miniseries sign up here
Sir please make a video on truss bridge via SOLIDWORKS 2021
What’s that
@@with-Aryan it is a bridge
Hi dear Mr. aryan,
How can I get your courses?
Regards Saman
courses.solidworkstutorials.net/
How did you allow the dimensions to appear in the middle of the dimension line, I changed my document options to ANSI like you did in the video? Also thank you for this video series!
What do you mean?
@@with-Aryan the dimensions you have in the video are centered between the lines for showing the dimensions, while mine are above that line
@@leonxu9650 go to the settings, go to the Documents peroperties tab up there, go to Dimensions, and change your style there
I am going to do this!!
Go for it Rocky
How can I get on board with this course and how much is it.
courses.solidworkstutorials.net/
The best way would be to check my page and read what's in it. I highly recommend you that course because I have put my whole heart into making it and people absolutely love it
Mashady khoob Darsh meedy HaA. Valy Zood Baush
Thanks for the efforts, really appreciated! Keep Going
glad you liked it.
You are a beast teacher laterally
Thank you!
I learned to fell tress on a chainsaw before I used an axe to down a tree.
But I know what your mean.
Maybe say you would learn to pilot a plane before a helicopter
I think you have to have your fixed wing before you can learn helicopter :)
You seem to become my perfect teacher @SolidWorks with Aryan Fallahi
Please how can I access all your tutorial package on this
Thanks! courses.solidworkstutorials.net/home-new here
I just had an ad by the creator of this video before I watched it 😂
yeah, I've heard that before :)
Love you sir ❤ your videos help me alot
Thank you! I'm very glad I could help you
dude my solid works 2021 looks nothing like yours, the graphics are different and the text how do you set up the screen to match ?
what do you mean, how does yours look like?
@@with-Aryan its hard to say without a screen grab. mine is the community edition its flat windows 10 style. your part, assembly and drawing are yellow and sort of 3d and in the middle of the screen, mine is blue on the left of screen and vertical it has new, new isometric part, iso metric sheet metal, iso metric assembly, iso metric draft, iso metric weldment. all of my graphics in the top ribbon are different to yours the look is different so i cant follow your tutorials. im a bit slow and need to be fed every little step.
@@Mids1970 send a screenshot to info@solidworkstutorials.net
@@with-Aryan sorry for wasting your time im using Seimens Solid Edge
@@Mids1970 np at all
Perfect
Thanks Elias, you should checkout my course, really!
Hello, how can I be member and how munch it cost, thanks shimon
Hi, it's all here :) courses.solidworkstutorials.net/
legend
Os there any cost free version to dwnload?
Free SolidWorks? No
Very useful videos.loveu from india
Glad you like them!
Very informative 👍
Glad to hear that
Hey man! What are your system specifications ???
-Your subscriber from India
I have to go to the office and check but I believe it is on the INFO section of my channel
Where can I get your course
Good day,
You can either send me an email at info@solidworkstutorials.net or visit my website at page.solidworkstutorials.net/
It helpfull and I also suggest my friends to watch your video
Thanks a lot!
This is such a good video, thankyou
I'm glad you liked it. What do you need to learn SW for?
@@with-Aryan I'm taking a Design class in school and I just want to get a head start on everyone else :)
@@S_G_B Then you wouldn't wanna miss this courses.solidworkstutorials.net/Webinar-Registration?utm=SCPHomeCTA
gilakkkkkk kerennnnnn,, iam new subsribe
happy to have you
I wanna learn piping isometric drawing
what is serial number in start
Thank you for this video
My pleasure
I waited and waited... no link or info to any course or free mini
I’m on holiday and will send you the link when I get back
How to install software ????
you need to purchase it first
then you run the auto installer inaside the package they send you to download
"...just after a quick solution, and get hang of it...". That sounds like my millenial engineering coworker who just crowbars his autocad knowledge to create solidworks geometry.
You know take complex 2D polygon from legacy autocad.
Flatten and delete the overlapping lines and entities. Then get dimensions by "clicking" on thousands of stupid entities, with "questionable" accuracy on their original locations.
Then adds a few changes to the polygon, and click on about a hundred individual solidwork constraints.
Then finally does a "single" extrude operation. Finish.
He is either "not patient" enough to learn the basics step by step, or "too afraid for his job" to take time off from "non-engineering" documentation or customer service to please his manager.
He doesn't "get it" (invest some time, learn the basics, be able to do solidworks confidently, quickly and without question). I have given up hope trying to help him.
This "engineer" will be "forever" second guessing his ability and speed to be able to make a "useable" solid model to be ultimately used for machining a part or a full assembly for machine design.
Do not become this type of "worker".
I was going to say engineer, but you don't need a degree to do solidworks.
In fact, best people to learn this are machinists, who are always "free handing" fixtures and jigs.
So helpfull
wow nice💙
glad to hear that
thank you
You're welcome
can we do work with 3d max
Yes, 3ds Max is a powerful 3D modeling, animation, and rendering software that is widely used in various industries such as architecture, product design, film and video game production, and more.
Great video 👌
Thanks 👍
Do we have to pay for your webinar?
the webinar is free
Finally, Jake Gyllenhaal himself came to give me instructions 😀
No way!
Are your courses in udmey or lyda?
None! On my own platform which makes those two look like little leagues. You should check it out courses.solidworkstutorials.net/
How can I download it?
Good day,
You can proceed to purchase a copy of SOLIDWORKS, from their official website.