How to Replace Blower Motor Resistor 09-14 Ford F-150
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Buy Now!
New Blower Motor Resistor from 1AAuto.com 1aau.to/id/1AHB...
1A Auto shows you how to repair, install, fix, change or replace a bad or broken blower motor fan speed resistor. This video is applicable to the 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Ford F150
For More Info visit us at 1aau.to/h/bc2/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
This problem just happened to my 2013 f150. After searching online, found your video. Not only do you show me how to fix it, you sell me the part to replace it with. I just ordered the part. Thank you for this video and replacement part.
+blaakrose glad to hear it!! Thank you for checking out our videos, and for shopping with us. We hope to do more business with you in the future!
@@1AAuto this was an easy fix. After replacing the failed part, my fan is now working properly. It still had the original part as well. The most time consuming thing was loosing the bolts to the part. The confined space under the dash made it more difficult removing the bolts. Your video and suppling and supplying the part made everything easy. Thank you.
1) Lowest blower fan setting, which I use 90 percent of the time, not working on my 2009 F150.
2) Watched the accurate, easy-to-follow video from 1A Auto.
3) Cost of part from 1A Auto -- under $30.
4) Installed part easily in about 20 minutes.
5) Saving around $50 to $70 repair shop labor, plus the satisfaction of "doing it myself" --- PRICELESS!
6) A BIG thanks to 1A Auto!
+Black Strat Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
BEST VIDEO WITH PERFECT INSTRUCTIONS!!! In this Houston Heat, you need the AC working almost all year long. Just not blowing on high all of the time. Sue did an AMAZING job with this video. I must admit that I did not have time to wait to order my part from 1A Auto, but will consider doing so in the future. I watched this video once, went to buy the resistor, and changed it out in about 10 minutes. That back screw took a few minutes to get out, but super easy to get in. I'm just an IT Guy and was able to do this. July 2, 2023
I have a 2014 F-150 and noticed my fan stopped blowing except for when it was on the max fan speed setting 4. Thanks to some Googling, and in particular, this video, I was able to diagnose, order the part, and perform the repair myself. It was only 3 7mm screws for the glovebox and 2 additional 8mm screws to remove where the Blower Motor Resistor is mounted. I did not even have any felt to deal with in my case. It was also easy to unclip the old part and replace it. Access to the 8mm screws is a little bit of a tight space and tricky, but still not too bad with a ratcheting style wrench. Actually all in all a very easy DJI repair for a novice to do start to finish in under an hour while taking your time, and quite an inexpensive part as well. Thanks so much for making this video!
Best video ever, I’ve never touched a tool before and it took me 30 minutes and it saved me so much money, I ordered the part online for 20$
Sue thanks for the video. I got this part for 25 $ instead of the 42 I was quoted and was able to install and fix the problem. Would recommend these videos as a teaching aid
I'm glad you bought the tool to don't mess the clips 😂😂😂
This is the best car repair video I ever saw! Just replaced mine. Same year F-150! Thank You!!
+Ron Thanks for checking us out! 1AAuto.com
Thanks for the clear instructional. I have a blower that only works on the 4th setting, I'll give this a try.
Hi Miklo, my blower also works on the 4th setting only.
Did you try changing the resistor? Did yours work?
Thank you for this video. My a/c just stopped working in my 2013 F150 STX V8. I didn't replace anything though. I just took out the resistor and put it back and and unplugged the wiring harness and plugged back in and a/c started working again. Your video helped me know how to inspect these parts.
+Wes Hunt Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Thank you, this was the only video that showed you how to undo the clip. 👍🏾
Outstanding video, clear and precise. Well done Sue!
Perfectly done video, worked EXACTLY as you showed. Thank you!!
my 2012 F-150 a/c was only working on number 4. I had this problem for months, the resistor fixed it.
+Willam L Thanks for the feedback!
Thank you for providing great instructional videos! Keep it up!
Hello, I'm not sure how long it will take to get any responses from you guys or anyone commenting. My dad owns a tire and auto care center and diagnosed this with my 2010 f150 over the phone. He said it matters if the hvac is manual or auto. How do I tell the difference in the part? It wasn't made clear which option this truck had on it. Thanks and great video!
Thanks sue for the clear instructions 😊
Thanks made it easy, with your video!!!
As always Sue, great video.
Thanks for video! My 2012 f150 didnt have 1 and 2 speeds . Watched video and ordered part from your company. Only thing is my truck doesnt have or never had the felt panel that is held in by plastic pins? I bought truck new and other than getting new tires I'm the only person to work on truck.
+timglenleigh1 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
1A Auto, your part worked perfectly on my 2010 F-150 XLT. Thank you for the video as well!
This was so easy to do. Literally too me like 5 minutes
Hi Sue, great video. I have a 2014 lariat. I have humming sound in the blower area whenever I put the fan speed on high and only high. I removed the blower and it was clean. I put a small mirror under to look up to see if there was anything up there. There is a mesh screen that has pine needles and debris. I can reach up and touch the screen but the needles are on the opposite side. I’m not sure if some got through or even how to clean it. Or if that is making the noise. Any help would be much appreciated. Thanks Sue
Would a bad resistor cause a very bad burning smell in the cabin when the heater is on? It only happens when I stop at a red light or parked, but when I’m driving the smell goes away.
+James Silva We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Same issue I have on my 11-F150
Same issue James did you ever find out it was by chance?
Did you ever figure out the smell issue?
Very detailed instructions
I'd recommend a thumb driver for the resistor screws. Much easier than a ratchet or even ratchet wrench.
+Jeff Clark Thanks for the feedback!
All is i can say is thank you
+Anthony Galipo Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I replaced my resistor and now my blower motor runs on high no matter what position I choose. This lasts until I turn the truck off. Any ideas?
What if mine doesn’t look like that. Mine is a white box. Can I buy this one and replace it or does it have to be the same one.
If you take the cover off of the fuse panel that is under there, it makes it much easier to get that back pesky little screw out
Excellent video, thank you 😊
Great video, I bought my part from you as this made it simple!
question: my blower was working on all 4 settings, now just works only on high. How do you know if it is the resistor or actual switch?
Resistor also check your fuse or relay if they good then check your other settings on your controls, if they work then check your resistor if it good then check your wires but if it's bad then change them
Its a gamble
But it usually is the blower motor resistor
Thanks for the information!
Seems that there are two types of blower motor resistors the one picture and another type with an aluminum heat sink which to use?
This video is still paying itself 5years later.
+@tonyo4437 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
My heat and ac work fine, but the fan is on full blast even on the lowest setting. All settings are full blast. Is this likely to fix that problem? Thanks
I have a huge problem. I have a 2010 ford f150 platinum. Heater ac stop working last year. Realized it was this connecter. But I didn't realize I could replace it. I ve dealt with this problem before. I loaned truck to my brother so he could drive to work which was literally less then 2 miles from work. Was only supposed to be work back as I wanted to see if I could fix my issue which is what's in this video. Mind you this is happening in December 2022. He made my truck a daily driver and now the wires and connecter that connect to this are melted and burnt. Are those words easily replaceable? Or am I looking to outside work to replace them
Mine was going back for a long time, by the time I replaced it, the connectors had started to melt. I got a new resistor unit, it is the right one, but now nothing works. Any chance of the truck just needing to calibrate to the new unit...like it would for vent actuators?
+Kenneth Rutt Thanks for checking us out! It may be possible the blower itself has gone out as well. Typically you won't need to re-calibrate this when a new resistor is put in.
I have a 04 f150 is the resistor in the same place?
I have a lariat limited and it looks different it was larger with a lot more wires in there
if i have no blower on the first 3 speed settings, but have it on the 4th (high) this would likely fix it right?
Yes it would, I had the same issue
I replace the resistor on my 2012 f150 but it only worked for a few days now my air only blows on the highest setting one two and three don’t work only four
I just replace mine a couple of weeks ago..it went out again is this normal?
Same for the E150 van? Is this the same as a "rheostat"? I'm anticipating this repair for my company van.
+OIl Heat Tommy This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
So my motor will not work at all at times and then randomly turn on. Could that be the resistor? Or would that be the motor? Should i replace both?
+brian kirkvold We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
How do I know if this is the issue not the blower motor?
Like I can feel cool air when I'm moving at highway speeds. Trying to save the hassle of replacing the blower motor itself.
You could have showed what was wrong at the beginning and then how it works at the end.
I have a 2014 ford f-150 and that resistor is no where to be found under the dash
I have replaced this resistor four times in the last two months. I took vehicle in and asked them to check the blower amperage. They told me the issue was that the resistor and the connector are not "clicking" together. They wanted $350 to replace the connections. Has anyone else had this issue? I want to be sure this is the issue before I go through that cost.
What happens if i can’t get the resistor out?
What about a 2017
What's a cah?
Qual seu contato ?
Ehere is it loactated on a 2014 f250?
why does my resistor look different
Anyone know why one would go out multiple times? I just replaced it for a second time in my 2013 F150 XL 3.7L ecoboost v6
I replaced mine three times within a week. I replaced the blower motor and haven't had a problem since. I read that if you replace the resistor, go ahead and replace the motor as well.
I have replaced my resistor 3 times now because it keeps blowing within a month or two 2 after I install the new one. Any ideas what could be the cause?
+minameise We recommend having a mechanic take a look, there could be multiple reasons why you are experiencing this. Thanks for checking us out!
@@1AAuto a tu trouver ton probleme car j ai le meme
a tu trouver ton probleme car j ai le meme merci de me repondre
My blower is in hi speed bot is slow
Is the resistor ?
+jordan_1xb We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Thank you
+Laura Castro Thank you for your feedback!
3rd time I change this f@!kin' part
I changed my blower motor resistor and it still only works on high
Did you buy the right one. They have different ones for automatic (digital settings) and manual just blue and red settings also check your fuse and relay or wire/connectors
What does it do?
+B T A blower motor takes the heated or cooled air created within the furnace and circulates it throughout the home in order to ensure the temperature reaches what's called for on the thermostat.
EXCELLENT
+David Gutierrez Thanks for checking us out! 1AAuto.com
Mine looks different
Wrong piece not even the right piece. Ordered it and took it all apart just for it to be the completely wrong piece.