People can say what they want but the 3.7 sounds amazing especially with your setup and they are basically bulletproof motors. Sometimes newest and fastest isn't always best, especially with this sound 👌😎
Completely agree, it’s just getting your hands on one with low Miles that hasn’t been beaten hence why I went with the 3.0t. At the end do the day in Canada this is my 365 driver
Man your q50 is my favorite out of all the ones I've seen. Love the blacked out look with all the aero ! Stance is legit ! Sounds amazing! Cleanest one ive seen for sure!
I built this on my g37 sedan back in the old days when it required hours of searching through videos... I still have my factory cats but have some hfc sitting in the garage to get to one of these days. Thanks man and it sounds just as good now as it did in the start of the year. Very important to make sure your Borla mid muffler it’s up in there tight otherwise you will quickly find your cars new low point . I did have just the borla muffler installed first without the resonators and it sounds really good but loud and a lot more drone around 2200 rpm. To me the resonators brought the sound to that high end super clean note I was looking for.
Hey man! I tried doing this set up on my g37s and I ordered all the components and went to 5 different exhaust shops locally here in Tucson,AZ and they were trying to rip me off. The cheapest shop said $300 to install everything, and the most expensive was $650 to install everything. (Just the labor!, I had all the parts already). So I end up taking it to Nogales Son. Mexico. And everything was installed perfect 👌 for just $1500 pesos, (which is little under $70 USD) and I love it man!
Hi Mario Flz. I am also in Tucson and just did this system on my '13 G37 Convertible. I chose to go with Stainless pipe on the whole system as well. I had the work done at: Leon’s Exhaust Works 5294 N. Casa Grande Highway, Ste 110 Tucson, AZ 85743 They have done several of the local hot rods and other custom exhausts I know here in town. Certainly not as good of a deal as you got in Mexico, but a good shop and OK price here in town. Justin is the owner. Nice guy! I am very happy with the work. Stainless Tubing, Stainless Couplers, and labor was about $550.
So I got this setup installed yesterday and man it sounds amazing the car is definitely a lot louder, the way it growls at idle and low rpms is beautiful, i went with the magnaflow instead of the borla it's little bit more aggressive which is exactly what I wanted I actually get some little pops with stock cats I can't wait to get resonated test pipes but with this setup the car sounds amazing with stock cats🤙🏾 definitely one of the best custom exhaust setups you can have for this car or exhaust in general thank you 🙌🏾
I have a 3.0t Q60. just picked up the components, shopping for the right shop in the Atlanta area to do the install. I love this set up. Thank you for the info and making things dummy proof.
I just got this installed yesterday and it has completely renewed my excitement to drive this everyday. It sounds even better in person than it does on the videos!
I've been trying to get a shop to install this system and every estimate has been 600 or more. One shop has done this same set up for 800 on multiple cars recently. So this system is very popular here in West Palm Beach. Just wish I had a good shop like yours to do it.
Just got my scs exhaust setup today..couldn't stop driving it...Best "bang" for your buck..why spend money 💰 💰 💰 on those expensive chrome systems..it's under the car..it's just gonna get dirty..this can provide you that competitive edge without overspending..plus you can tweak each component to your liking ..complete customizable...I personally added red carbon fiber tips because my car is red...loving it!
Your set up sounds 10x better than the $2000 shockwave system. Good job. I can't wait to get my 2020 Q50 RS because I'll be duplicating this. I have a feeling it sounds so good is because you are using aluminized pipe instead of stainless steel which I feel leads to drone. I had 92 SHO with it's lovely 3.0L Yamaha built motor. I built a custom 2.5" exhaust with flex tubing which was necessary to keep the system from yanking itself apart due to the transversely mounted motor and aluminized Dynomax turbo mufflers. The system made the V6 sounds like a V8, everyone loved it and it sounded way better than the Borla system made for the car, which was stainless steel, and was soooo much cheaper, cost me around $150 to do as opposed to $1000 for the Borla. It allowed the car to breathe and it was able to run 165mph with a tune.
I built this exhaust for my Q50 but found there to be good amount of resonance in cabin in the 2000-2700 RPM range. So, I added some 1/4 wave resonator pipes to each branch after the x-pipe resonator and it's way quieter in cabin at those specific RPM ranges. I used ~27" as my desired length for the 2" resonators. Posting for those who might want to eliminate their potential resonance. 27" length is only for ~125-135 Hz resonance...
Some sound deadener on the trunk floor goes a long way as well. But 2000-2700 is a wide range for drone with this system. I’m a bit surprised. After about 2 full years of breaking in, my drone range with resonated test pipes is 1900 - 2100rpm.
Hi Sean, I'm looking to do some quarter wave resonators as well. Do you mind me asking how much you paid to have them done? Provided you took them to a shop and didn't do them yourself. Cheers!
@@alf2633 I had a 'friend' discount and helped so cost will vary but IIRC the tubing was less than $150 and labor was 2 hours max. I think all in I was around $900-1000 but didn't get 'crush' bent tubing. I'd suspect 1/4 wave resonators to be $200-300 installed.
@@seancallahan2730 Hi Sean! I am having exactly the same issue on my car, installed 2 days ago and the ~2400rpm drone in the city just kills me, I would not even mind if it was a bit quieter as well all togedher. Can you name please which resonator exactly you used that worked good for our issue? I could not find one for my car based on your details to put between the borla and the Upower resonators in the end. Thank you!
Great vid as always. Thanks for revisiting this. You covered all the bases. Im still looking for a shop. My local thief quoted me $1200 install...😂. Hope you n d family all doing well....keep d Q love coming !
I have a replacement Borla 400286 ProXS Muffler in a box (warranty, and for sale) after mine blew a large crack in it after 4 months of daily abuse. My car has RDP's on it and is probably the reason why. After a final kickdown from 7th to 3rd, it was destroyed. Went with a legit exhaust this time.
@@SpeedCultureStudios Just purchased all the stuff. I'm thinking of adding B0100-Q50S2, Infiniti axle back exhaust, After the Flow FX for hopefully a bit deeper tone. I'll take vids and link them to you when finished
With the list of items, is the sound clip that we are hearing at the beginning with just the borla muffler and flow FX resonators? Or is it one of the other items listed as alternatives. Also is the sound clip with stock cats or aftermarket?
Ahh man I feel like you made this video just for me 😂 thanks a lot ! ( I know I’m not the only one blowing up your comments about how to perfect the SCS set up)
I think it would be dope if you made these and sold them officially as speed culture studio(scs) cat back exhaust. A lot of people support and have the same setup (including myself) but they all sounds totally different.
It’s just video and location that makes them sound different. But yes, it would be great to sell a complete system. It just takes a ton of work and a ton of money to get something developed. Not as simple as it sounds
Love the videos man. I've got a 2013 g37x S sedan. Thinking about adding kinetix high flow cats to the speed culture cat back system. Would it be really loud, wife told me not to get ridiculous? One more, it wouldn't need a tune with just this set up, would it?? Thanks brother, keep pumping out these videos.
Awesome video! If I just order those parts you listed and bring them to the shop, should they be able to take care of the rest? I don’t know much about exhausts, so I wouldn’t know how to tell them what I want.
I forget what kind of rest pipes you have. I have Berks and I might be going with this set up because of cost and it sounds great. Between going borla and magnaflow
Hello, I’m planning to get this setup on my car and I’m concerned about few things 1) Does this setup effect on performance or milage? 2) Should I get a tune after this exhaust?
@@SpeedCultureStudios I have one more question. There is a brace (metal plate) underneath the center of the body in the exact same place where you have placed the Borla muffler (as showe in the video). Have you bolted it back at the place after your custom exhaust?
I have been inspired by this video so I'm actually doing the same setup on my 3.5 Altima. I just put on a jemini performance ypipe recently so hopefully I can achieve a new sound. Great informational videos.
Yeah they should know, but you should call first and get an estimate. Just tell them you're needing a custom catback system and that you have all the major components and they just need to tie it all together. If they are a decent shot, they'll know what to do and it should only be a 1 - 2 hour job.
Hello, been watching for some time now and love the build! i was wondering if the Magnaflow dula in dual out x-flow muffler would give the same/similar result. Its a lot easier to comeby where I live. any help would be appreciated thanks!
Saw the other exhaust vids. Good job on this one. Straight forward to the point with great detail. The pics and drawing was a nice touch. What is the name and location of your exhaust shop if u don't me asking? Located in Va. Have family out your way. Shop looks like they did a good job. Proper alignment and placement. Looks good. Sounds good.
Thank you! Shop is Inman Muffler in Inman SC. They are good guys and car guys so they care about doing good work. Check them out on Facebook, they get some awesome cars going through that shop!!
You the man bro thanks 🙏 I’ll definitely send clips when I get it done right now Im still using red sport exhaust Im going to put it out on the market if anyone wants it very clean
You can install down pipes if you want, but everything is in the description. You likely won’t feel any gains from a catback system until the car is tuned
2 questions 1. is the performance gain from running test pipes versus running stock cats significant? (i know it won't be as loud) 2. if i were to install this with test pipes and not tune it for 1-2 months, would that damage my car in any way?
You could expect probably a 10hp difference after tuning with cats vs test pipes. Obviously cats keep you street legal. People have installed test pipes and waiting a few months to tune. It’s not ideal but the car would likely survive if you don’t race it too hard in that period.
I am doing a close version of your exhaust. And I actually had it on my coupe previously as well. On the coupe I first just had a muffler delete, keeping the stock resonators but that was too loud so I got the flowFX put in after the resonators. And on my sedan that I currently have, I’m replacing both the muffler and resonators with the flowFX.
@@SpeedCultureStudios I will definitely be taking video clips of the sedan once it's done. I absolutely loved the sound of the coupe but I kept finding myself wishing it was just a little bit more aggressive, which is why I'm not keeping the stock resonators. Also, in comparing videos of coupes and sedans with muffler deletes, the sedan resonators seem to dampen the sound a lot more than the coupe resonators.
@@boomerspeed0124 That's interesting that you're hearing a difference. I do not think there is any difference in the exhaust systems between the coupes and sedans other than overall length, which is still only a few inches as far as I know.
@@SpeedCultureStudios Hmmm that's interesting. I know for some reason on the sedan, the axleback has a ring clamp style connection instead of flanges. And due to this it necks down to a very small diameter at the connection. Most axleback muffler deletes that I've seen also have this narrow neck so maybe that's making a difference in the sound? Either way I'm taking the resonators off anyway so I'm not too concerned about it since I won't have that connection there anymore.
about to pull the trigger on this! i already have a muffler delete + resonated test pipes. gonna do the borla muffler first and see how i like it. then go with the resonators if i want to tone in down more. in your opinion how would JUST the borla muffler aspect do (added to a system with resonated test pipes, stock resonators, and muffler delete). appreciate all your vids
Adding the borla and test pipes will sound good I’m sure. The factory resonators are pretty strong. The only thing is that you would be keeping the 2.2” diameter pipe from the borla back so you wouldn’t get the same flow. Might make some nice torque numbers though!
It's a good thing you're not in Europe. Nothing more than an oil change gets done in a day here and you can't throw money at the mechanic to make him work faster. I can't imagine how long my shop in Germany will take to install such a system.
That’s too bad! It’s typical for mechanics to have a standard rate, but guys at exhaust shops aren’t “mechanics” per se and typically bid/quote jobs based on how long they think it’ll take. I guess we are fortunate here to have shops that would prefer to finish as many jobs as possible in a day in order to increase profit!
Hey! quick question, i have a 3.7, is it worth doing if you are only willing to install it on stock cats? i see some of your more recent comments saying its similiar to stock sound with cats. i just want a good exhuast note as well as a boost in loudness. Thanks appreciate it i love all your videos, youre the man!
Keep your eyes out for failing parts after installation and try to pinpoint the different times you put on each exhaust component! I have been dealing with the fiberglass packing from one of my resonators blowing all over my rear bumper since i had the exhaust installed. Now i have a weird metal grinding noise/resonance that is very loud and makes my car sound broken when accelerating at highway speeds :( Currently chasing my own tail around trying to find what could be damaged so i can replace it....
That sucks man. Likely a bad weld inside one of the resonators. Do you have the borla xs? If so, have that pulled and inspected-borla will replace it-or the seller will. That has the most complex internals compared to the round resonators so that would be my thinking.
@@SpeedCultureStudios Yep i do I haven't had the time to pull and inspect any specific components yet but i kind of thought the same thing you mentioned, Biggest exhaust component with the most things that could potentially be damaged. I sent off a few emails this morning waiting to get a response back from both borla and the company i bought the borla from hoping to get some kind of solution asap! Its not fun being embarrassed to pass someone because of your exhaust resonance haha. I miss how pure and clean the exhaust sounded on the first day it was installed.
Mines similar but I have a Magnaflow 11386 for the x pipe and rights after 2 vibrant ultra quiets and no mufflers in the end. I think I have some cheap 10” length flex pipes from Amazon. I also have 3” oval tips from vibrant that look stock
@@VegaBlendz_ I forgot , just look up vibrant ultra quiet resonators 2.5”. Look for the best deal. I think I paid 90 for mine, that was a while ago though. I don’t know how prices are right now
is it possible to add an electronic valve to this kind of exhaust system? this sounds so good but i also dont want my car sound too loud all the time lol
@@jalenhampton8036 Just a muffler delete at this point would be good for some added sound! It's cheap and sounds nice with factory catalytic converters still in place.
Thank you I truly appreciate al that ur posting for the q50 community. I would like to send u pics of my 50 and all the upgrades that I was inspired by you just don't now where to send the pics
@@SpeedCultureStudios the combo I'm thinking is Berk HFC's, magnaflow X pipe muffler, and vibrant street power mufflers (part number 1146) even tho the vibrant mufflers are straight through I imagine it shouldn't be too loud with the combo of HFCs and X pipe muffler. what's your thoughts?
moto bazuka youre right, the HFCs will quiet it down quite a bit. The vibrant mufflers are pretty good at toning things down too. It’ll sound good but will be pretty tame.
I just started ordering the parts needed for my G37S sedan. Cant wait to see how it sounds. Im still deciding which test pipes to buy tho. I want something on the slightly louder side. I was also quoted $240 for install!
@@SpeedCultureStudios yeah ive been eyeing some berk resonated. So im getting this installed with my stock cats for the moment, would you still recommend those flex pipes? or just until i get test pipes to reduce vibration?
Ending up buying everything already but spent about $410 with tax + free shipping on everything. Unfortunately it seems that everything IS going up in price so I’d recommend others to buy ASAP lol
@@jjamaya01 we are definitely expecting anything steel/metal related to go up significantly this year. Some exhaust shops have said material prices will double by year end
Awesome Video. Very informative. I have a Q70 3.7 awd. I am getting ready to install ISR longtube headers but need to choose my exhaust first. I LOVE the sound of your ride. Any recommendations, or should i simply go isr Headers into the exact set up you recommended in this video as shown on your ride? Thank you for sharing the knowledge so clearly! 🙌🏻.
I personally would just go from headers right into this setup. If you're looking for a bit more of an aggressive sound, I would maybe just use the borla and leave the flowfx resonators out. It's a V8 so they sound a bit different than the v6 and don't always require additional resonators.
@@SpeedCultureStudios Appreciate the advice! I have the v6 in mine, same engine I believe as you do in the Q50. Man... i keep watching your initial sound bite in the rain. So good!
It would be loud and sound pretty wicked at wide open throttle but cruising around town it doesn’t sound great. It’s quite raspy with no resonators even with stock cats
@@SpeedCultureStudios do u think the borla in a different location like where the Y pipe was would be a better option? because i kinda don't want resonators 😅
@@SpeedCultureStudios ahh but i could use it sideways and weld tips to the borla and use it as a standard muffler can't i? i think u had a drawing of how u could use the borla in the back instead of Y pipe location
hey! love the vid and the sound, going to order all parts as soon as possible, i just wanted to confirm with you, even though i’m 98% sure i’m right about it, i have 2007 g35 sedan, identical to the 37, and i just had one dumb question just to get out of my brain lol, i would run this normally correct? *not backwards like the 370*
I got this set up done with a pair of high flow cats a couple weeks back. It's been great and made me fall in love with the car all over again. However, I noticed that water drips from the HFCs to cat-back flange connection on start up. Is that normal? Or does that mean that i have an exhaust leak? It also smells like exhaust fumes from the engine bay on start up, so leads me to wonder if that is an exhaust leak, or is that to be expected with a custom cat-back + HFCs?
@@SpeedCultureStudios I do have the Z1 gaskets installed already. I'll probably have the bolts re-tightened and hopefully that solves the issue. Thanks!
It’s more aggressive because the alternative allows more rasp. It doesn’t make it deeper. Some people like a little rasp. I do not. The alternative is a magnaflow which is a bit smaller. It’s linked in the other exhaust videos
Towards the end of the video you mention that there’s another pipe needed for the install what kind of pipe is needed? I got quoted $500 for install was yours $150 with the pipes?
Speed Culture Studios after the exhaust getting a tune...do you have any recommendations? I’m not getting a HE as i live in toronto (canada) heat soaking isn’t a thing up here.
thanks for all your videos, I just got a black 2014 Q50S and watching your videos gives me plenty of ideas and direction! First thing (well actually second as I blacked it out as 1st thing), I'm now looking to improve the sound; don't want to spend more than 500$ and I don't want check engine light - for noise performance is not the priority, sound is... The old G37 sounded good stock; the 2014/2015 Q50 is way too tamed. I've heard about Rev9 axle back or Ark exhaust...any recommendations for deep sound, no drone, no rasp and not too loud?
Hey man love the videos, you've been a big inspiration/help with everything I needed to know about my G. I recently had magnaflow HFC's installed with a muffler delete (the delete was temporary until I figured out what I wanted from the resonators to the rear. My shop also did a custom 2.25" Y pipe to replace my OEM as it was leaking. Would you still recommend this muffler & resonator setup with 2.25" piping as opposed to 2.5" and HFC's instead of instead of test pipes?
Do you think the magnaflow without flowmasters would be TOO loud? or do the flowmasters make a big difference in sound? (don’t wanna go with borla because i heard they go bad a lot lol)
Not too loud necessarily (although subjective) it will be a bit raspy if you have test pipes. Borla has had some quality issues lately - with over 3000 people with this setup I’ve only heard of a few problems lately, but the magnaflow is a solid alternative
Love the videos bro, love your explanation as well. I live in a small island and i found a dual inlet dual outlet muffler from magnaflow that very similar to the Borla one you have. Do you think the tone will be similar and should I go for it or not? I just got my q60s 2015 (VQ37)
@@kurthigdon8829 that's what I ended up doing I'm using my Y pipe and using 2 vibrant street power mufflers back to dual exhaust tips if the sound is a little to much I'm gonna add some resonators. But my appointment is scheduled for Monday so I'll upload a sound clip when it's done 👍🏿
And YES you can shoot flames with it! Just remember...exhaust components are not designed to handle flame maps and burble tunes, so moderation is key!
still need tests pipes for that right boss?
what are your drop in filter ?
youngchop aFe dry
@@stephenayala5638 Yes, that's correct.
what do the gains look like from this exhaust, is it super restrictive?
People can say what they want but the 3.7 sounds amazing especially with your setup and they are basically bulletproof motors. Sometimes newest and fastest isn't always best, especially with this sound 👌😎
Completely agree, it’s just getting your hands on one with low Miles that hasn’t been beaten hence why I went with the 3.0t. At the end do the day in Canada this is my 365 driver
@@hailmary2091 I have a 40k mile '14 if you know anyone
@@o.c.a.9376 engine only or the complete car
Just picked up a 3.7, you’re a goat for this setup. Going “violent” and then tuning it, flame map.
Man your q50 is my favorite out of all the ones I've seen.
Love the blacked out look with all the aero ! Stance is legit ! Sounds amazing! Cleanest one ive seen for sure!
Really appreciate that man! I love it myself. Surprisingly not bored of it yet!
I built this on my g37 sedan back in the old days when it required hours of searching through videos... I still have my factory cats but have some hfc sitting in the garage to get to one of these days. Thanks man and it sounds just as good now as it did in the start of the year.
Very important to make sure your Borla mid muffler it’s up in there tight otherwise you will quickly find your cars new low point .
I did have just the borla muffler installed first without the resonators and it sounds really good but loud and a lot more drone around 2200 rpm. To me the resonators brought the sound to that high end super clean note I was looking for.
Yes it has to tucked up nice. Have to rely on the exhaust shop to do it right.
@@SpeedCultureStudiosif it’s tucked up tight, if i get the car lowered do you think it’ll end up scraping?
Hey man!
I tried doing this set up on my g37s and I ordered all the components and went to 5 different exhaust shops locally here in Tucson,AZ and they were trying to rip me off. The cheapest shop said $300 to install everything, and the most expensive was $650 to install everything. (Just the labor!, I had all the parts already). So I end up taking it to Nogales Son. Mexico. And everything was installed perfect 👌 for just $1500 pesos, (which is little under $70 USD) and I love it man!
Oh wow now that’s a deal! But 300 isn’t all that bad still.
If you have IG, please send me some sound clips!
Hi Mario Flz. I am also in Tucson and just did this system on my '13 G37 Convertible. I chose to go with Stainless pipe on the whole system as well. I had the work done at:
Leon’s Exhaust Works
5294 N. Casa Grande Highway, Ste 110
Tucson, AZ 85743
They have done several of the local hot rods and other custom exhausts I know here in town. Certainly not as good of a deal as you got in Mexico, but a good shop and OK price here in town. Justin is the owner. Nice guy! I am very happy with the work.
Stainless Tubing, Stainless Couplers, and labor was about $550.
@@scottturnbull2576 Thanks for sharing this info!
So I got this setup installed yesterday and man it sounds amazing the car is definitely a lot louder, the way it growls at idle and low rpms is beautiful, i went with the magnaflow instead of the borla it's little bit more aggressive which is exactly what I wanted I actually get some little pops with stock cats I can't wait to get resonated test pipes but with this setup the car sounds amazing with stock cats🤙🏾 definitely one of the best custom exhaust setups you can have for this car or exhaust in general thank you 🙌🏾
Man so glad to hear you like it!!
Which magnaflo did you go with?
How long did the shop take to install it? I’m getting quoted at $150 an hr is that a fair price?
@@TakeThis_L took my shop 45 minutes. If they are saying more than 2 hours, it’s a joke. 150 an hour for 1-2 hours isn’t bad
@@SpeedCultureStudios thanks for the quick reply and okay sweet. Shouldn’t take them that long then so it’ll be $300 or less which is fair.
I have a 3.0t Q60. just picked up the components, shopping for the right shop in the Atlanta area to do the install. I love this set up. Thank you for the info and making things dummy proof.
You mind making a video with this setup? Id like to know how it sounds on a 3.0t
Did you ever find a shop with a decent price? I’m in Atlanta as well
i'm in ATL as well, so if you have an update please let us know
I just got this installed yesterday and it has completely renewed my excitement to drive this everyday. It sounds even better in person than it does on the videos!
So awesome to hear!!
what’d you ask the shop you went to?
Just got this done on mine after watching this in 2020! Thank you!!
Hell yeah!
man the way you explained this i feel i can do it myself
Glad to hear that!
Just ordered the setup off Amazon. Cannot wait. Thank you sir for sharing this gem.
I've been trying to get a shop to install this system and every estimate has been 600 or more. One shop has done this same set up for 800 on multiple cars recently. So this system is very popular here in West Palm Beach. Just wish I had a good shop like yours to do it.
It’s a 1 hour job. Don’t let people push you around!!
Just got my scs exhaust setup today..couldn't stop driving it...Best "bang" for your buck..why spend money 💰 💰 💰 on those expensive chrome systems..it's under the car..it's just gonna get dirty..this can provide you that competitive edge without overspending..plus you can tweak each component to your liking ..complete customizable...I personally added red carbon fiber tips because my car is red...loving it!
Love this man! Really appreciate it. Always helps to hear from people that have installed it themselves!
Sound clip ?
The VQ can be amazing especially if you pair it correctly with its dedicated counterparts.
you’re a legend bro, love this channel man, just bought a 3.0t and you helped me a lot🙏
Thanks a lot for following along!
Your set up sounds 10x better than the $2000 shockwave system. Good job. I can't wait to get my 2020 Q50 RS because I'll be duplicating this. I have a feeling it sounds so good is because you are using aluminized pipe instead of stainless steel which I feel leads to drone. I had 92 SHO with it's lovely 3.0L Yamaha built motor. I built a custom 2.5" exhaust with flex tubing which was necessary to keep the system from yanking itself apart due to the transversely mounted motor and aluminized Dynomax turbo mufflers. The system made the V6 sounds like a V8, everyone loved it and it sounded way better than the Borla system made for the car, which was stainless steel, and was soooo much cheaper, cost me around $150 to do as opposed to $1000 for the Borla. It allowed the car to breathe and it was able to run 165mph with a tune.
Bro what did u do? 150$ what?
Thanks for the list! I bought it all and had it installed. Sounds amazing and I love it.
That’s awesome!!
What car ?
I swear this man has a video for everything! 🙏 You just gotta find it 🔥
It’s true!
put this exact setup on my 3.0t sounded really quiet, took off the muffler and it sounded nice , no rasp , nice growl , nice tone.
Did you still have catted downpipes?
@andrewmaldonado do u have video of the how it sounded on the 3.0t
Let's hear it, please.
Amodz i actually don’t upload on yt but if you want i can send you a vid
esuttoneric again i don’t upload on yt but i can send you a vid of how it sounds
I built this exhaust for my Q50 but found there to be good amount of resonance in cabin in the 2000-2700 RPM range. So, I added some 1/4 wave resonator pipes to each branch after the x-pipe resonator and it's way quieter in cabin at those specific RPM ranges. I used ~27" as my desired length for the 2" resonators. Posting for those who might want to eliminate their potential resonance. 27" length is only for ~125-135 Hz resonance...
Some sound deadener on the trunk floor goes a long way as well. But 2000-2700 is a wide range for drone with this system. I’m a bit surprised. After about 2 full years of breaking in, my drone range with resonated test pipes is 1900 - 2100rpm.
Hi Sean, I'm looking to do some quarter wave resonators as well.
Do you mind me asking how much you paid to have them done? Provided you took them to a shop and didn't do them yourself.
Cheers!
@@SpeedCultureStudios I've got stock cats FWIW.
@@alf2633 I had a 'friend' discount and helped so cost will vary but IIRC the tubing was less than $150 and labor was 2 hours max. I think all in I was around $900-1000 but didn't get 'crush' bent tubing. I'd suspect 1/4 wave resonators to be $200-300 installed.
@@seancallahan2730 Hi Sean! I am having exactly the same issue on my car, installed 2 days ago and the ~2400rpm drone in the city just kills me, I would not even mind if it was a bit quieter as well all togedher.
Can you name please which resonator exactly you used that worked good for our issue? I could not find one for my car based on your details to put between the borla and the Upower resonators in the end.
Thank you!
I'm about to pull the trigger on this. I already have a rev9 axle back, so I'll run the borla into that.
Good plan
Hands down...this is the greatest exhaust note ever and thank you so much for braking it down like if were retarted😂 i appreciate it.
Lol thank you for the compliment!! Sounds great still after almost 2 years!!
Gonna do this soon, just a bit different instead of flow fx i will be using dynomax race bullets hoping it sounds similar just a bit louder
Let me know how it goes
i got it done felt pretty good 2:28 but thats where i messed up
pull at 3:00 is sooo crispy🔥 this set up is def coming soon
Appreciate it so much man.. I dream of the day I can make this happen bro.. now I've got the blueprint thanks to you
Hell yeah!
What the name of the exhaust shop that did your exhaust system they did a really good job look great
Inman Muffler in Inman, SC
Great vid as always. Thanks for revisiting this. You covered all the bases. Im still looking for a shop. My local thief quoted me $1200 install...😂. Hope you n d family all doing well....keep d Q love coming !
Really appreciate that man! And yeah there’s gotta be a shop around you that’ll do it reasonable!
Got quoted the same thing, but that price is without the y pipe
I got quoted the same price
I have a replacement Borla 400286 ProXS Muffler in a box (warranty, and for sale) after mine blew a large crack in it after 4 months of daily abuse. My car has RDP's on it and is probably the reason why. After a final kickdown from 7th to 3rd, it was destroyed. Went with a legit exhaust this time.
The borla is “legit.” It’s one of the highest quality mufflers/resonators you can buy.
@@SpeedCultureStudios Just don't use one w/o cats. Now someone who wants one?
Sounds beautiful as always. I can't wait to do this setup.
You’ll love it!!
@@SpeedCultureStudios Just purchased all the stuff. I'm thinking of adding B0100-Q50S2, Infiniti axle back exhaust, After the Flow FX for hopefully a bit deeper tone. I'll take vids and link them to you when finished
Just bought the scs catback and a set of berk RTP. Love the muffler delete but i think that it’s time 🙏🏻 can’t wait to get it installed 😍
Hell yeah man!
How's it going
can you send clips
Sound clip ?
🙏🏽🙌🏽finally a exhaust setup that isn’t ear rape
Love the vids bro keep em comin🔥🔥helping with my q build
Lol thanks!!
With the list of items, is the sound clip that we are hearing at the beginning with just the borla muffler and flow FX resonators? Or is it one of the other items listed as alternatives. Also is the sound clip with stock cats or aftermarket?
This is with the Borla and FlowFX. The car has resonated test pipes. The system was designed for test pipes. No need to use it with stock cats.
Ahh man I feel like you made this video just for me 😂 thanks a lot ! ( I know I’m not the only one blowing up your comments about how to perfect the SCS set up)
I get tons of questions every single day so thought I better make one lol
I think it would be dope if you made these and sold them officially as speed culture studio(scs) cat back exhaust.
A lot of people support and have the same setup (including myself) but they all sounds totally different.
It’s just video and location that makes them sound different. But yes, it would be great to sell a complete system. It just takes a ton of work and a ton of money to get something developed. Not as simple as it sounds
Love the videos man. I've got a 2013 g37x S sedan. Thinking about adding kinetix high flow cats to the speed culture cat back system. Would it be really loud, wife told me not to get ridiculous? One more, it wouldn't need a tune with just this set up, would it?? Thanks brother, keep pumping out these videos.
Hey i have a a 2008 infiniti g35 journey VQHR, I was wondering if this setup will fit on my car? Thanks for your time.
Yes, several have installed it in the g35
Awesome video! If I just order those parts you listed and bring them to the shop, should they be able to take care of the rest? I don’t know much about exhausts, so I wouldn’t know how to tell them what I want.
Yes. If you just show them the picture I included, they’ll know what to do.
Speed Culture Studios Thank you so much! pretty much every “mod” i’ve added to my q has come from your videos.
Cool Woeta glad to have you following along man!
@@SpeedCultureStudios where is this picture? i just ordered all the parts for this setup.
I forget what kind of rest pipes you have. I have Berks and I might be going with this set up because of cost and it sounds great. Between going borla and magnaflow
Top speed resonated test pipes. Berk are good too!!
Hello,
I’m planning to get this setup on my car and I’m concerned about few things
1) Does this setup effect on performance or milage?
2) Should I get a tune after this exhaust?
1. No
2. Only if you install HFCs or test pipes with it
Hope this helps!
@@SpeedCultureStudios got it👍🏻 thanks for replying. Appreciate it
@@SpeedCultureStudios I have one more question. There is a brace (metal plate) underneath the center of the body in the exact same place where you have placed the Borla muffler (as showe in the video). Have you bolted it back at the place after your custom exhaust?
@@nithinyadav8813 nope just removed it. Or you can use spacers if it doesn’t fit back up
I have been inspired by this video so I'm actually doing the same setup on my 3.5 Altima. I just put on a jemini performance ypipe recently so hopefully I can achieve a new sound. Great informational videos.
Please send me clips of that on IG when it’s done!!
@@SpeedCultureStudios no problem
How do i ask the shop to install this setup? Do i ask for a custom exhaust or do i take all the parts and they should know what to do ?
Yeah they should know, but you should call first and get an estimate. Just tell them you're needing a custom catback system and that you have all the major components and they just need to tie it all together. If they are a decent shot, they'll know what to do and it should only be a 1 - 2 hour job.
@@SpeedCultureStudios thank you 🙏🏻
Hello, been watching for some time now and love the build! i was wondering if the Magnaflow dula in dual out x-flow muffler would give the same/similar result. Its a lot easier to comeby where I live. any help would be appreciated thanks!
Saw the other exhaust vids. Good job on this one. Straight forward to the point with great detail. The pics and drawing was a nice touch. What is the name and location of your exhaust shop if u don't me asking? Located in Va. Have family out your way. Shop looks like they did a good job. Proper alignment and placement. Looks good. Sounds good.
Thank you! Shop is Inman Muffler in Inman SC. They are good guys and car guys so they care about doing good work. Check them out on Facebook, they get some awesome cars going through that shop!!
Appreciate the reply. Thank you
Ara Rinderle no problem
You the man bro thanks 🙏 I’ll definitely send clips when I get it done right now Im still using red sport exhaust Im going to put it out on the market if anyone wants it very clean
sounds good man!
Will this affect performance? Also, do I need anything other than what you put in the description, if my Q50S red sport exhaust is stock?
You can install down pipes if you want, but everything is in the description.
You likely won’t feel any gains from a catback system until the car is tuned
Just purchased all my parts for the exhaust!!!!!
Awesome! You’ll love it!
2 questions
1. is the performance gain from running test pipes versus running stock cats significant? (i know it won't be as loud)
2. if i were to install this with test pipes and not tune it for 1-2 months, would that damage my car in any way?
You could expect probably a 10hp difference after tuning with cats vs test pipes. Obviously cats keep you street legal.
People have installed test pipes and waiting a few months to tune. It’s not ideal but the car would likely survive if you don’t race it too hard in that period.
@@SpeedCultureStudios ahh okay, thanks!
I am doing a close version of your exhaust. And I actually had it on my coupe previously as well. On the coupe I first just had a muffler delete, keeping the stock resonators but that was too loud so I got the flowFX put in after the resonators. And on my sedan that I currently have, I’m replacing both the muffler and resonators with the flowFX.
I’d like to hear that!
@@SpeedCultureStudios I will definitely be taking video clips of the sedan once it's done. I absolutely loved the sound of the coupe but I kept finding myself wishing it was just a little bit more aggressive, which is why I'm not keeping the stock resonators. Also, in comparing videos of coupes and sedans with muffler deletes, the sedan resonators seem to dampen the sound a lot more than the coupe resonators.
@@boomerspeed0124 That's interesting that you're hearing a difference. I do not think there is any difference in the exhaust systems between the coupes and sedans other than overall length, which is still only a few inches as far as I know.
@@SpeedCultureStudios Hmmm that's interesting. I know for some reason on the sedan, the axleback has a ring clamp style connection instead of flanges. And due to this it necks down to a very small diameter at the connection. Most axleback muffler deletes that I've seen also have this narrow neck so maybe that's making a difference in the sound? Either way I'm taking the resonators off anyway so I'm not too concerned about it since I won't have that connection there anymore.
Kyle Hayslett I cant be certain of diameters, but sure that could potentially make a difference in tone.
Question which of the FlowFx you rocking the regular one or the quieter one??
Less loud
No problem thank you
about to pull the trigger on this! i already have a muffler delete + resonated test pipes. gonna do the borla muffler first and see how i like it. then go with the resonators if i want to tone in down more. in your opinion how would JUST the borla muffler aspect do (added to a system with resonated test pipes, stock resonators, and muffler delete). appreciate all your vids
Adding the borla and test pipes will sound good I’m sure. The factory resonators are pretty strong. The only thing is that you would be keeping the 2.2” diameter pipe from the borla back so you wouldn’t get the same flow. Might make some nice torque numbers though!
Anybody in GA got a shop they can recommend for the install ?
Did you find a shop?
id rather have burnt tips than polished got any links for some?
Anyone got a video of it on a 3.0?😂
Future set up , your videos are the best 🙏🏼
Really appreciate that!
A baby gtr
So I just order everything on the list and I’m good to go? Well besides the pieces that the muffler shop provide b
Yes. Just pay attention to my description and how the system is laid out
It's a good thing you're not in Europe. Nothing more than an oil change gets done in a day here and you can't throw money at the mechanic to make him work faster. I can't imagine how long my shop in Germany will take to install such a system.
That’s too bad! It’s typical for mechanics to have a standard rate, but guys at exhaust shops aren’t “mechanics” per se and typically bid/quote jobs based on how long they think it’ll take. I guess we are fortunate here to have shops that would prefer to finish as many jobs as possible in a day in order to increase profit!
Hey! quick question, i have a 3.7, is it worth doing if you are only willing to install it on stock cats? i see some of your more recent comments saying its similiar to stock sound with cats. i just want a good exhuast note as well as a boost in loudness. Thanks appreciate it i love all your videos, youre the man!
No it’s not. Just do a muffler delete if you’re looking for more volume
had to subscribe.. ive watched almost all the vids on where he talks about the exhaust and whats best.. thanks boss for the tips🙌🏽
Really appreciate it!!
Can you put a new Link for the borla pro muffle the previous link isn’t working
Excellent advice as usual, thankyou once again from down under in Melbourne
Thanks for checking in!!
If this exhaust setup is too loud for my liking after installing. What are the best ways to quiet down the exhaust?
Can you do a video about it?
You would just add resonators
@@SpeedCultureStudios what types of resonators are the most effective to quiet down a exhaust?
Just ordered all the parts I'm sooo hyped!!
Heck yeah!
Just finished installing this yesterday with stock cats sounds sooooooooo good compared to stock worth every penny 😀
How did it work out for you was the sound what you expected
@@stephenneutralharris9162 it exceeded my expectations and get looks everywhere i go people are like is that sound coming from that car 😂
Keep your eyes out for failing parts after installation and try to pinpoint the different times you put on each exhaust component! I have been dealing with the fiberglass packing from one of my resonators blowing all over my rear bumper since i had the exhaust installed. Now i have a weird metal grinding noise/resonance that is very loud and makes my car sound broken when accelerating at highway speeds :( Currently chasing my own tail around trying to find what could be damaged so i can replace it....
That sucks man. Likely a bad weld inside one of the resonators. Do you have the borla xs? If so, have that pulled and inspected-borla will replace it-or the seller will. That has the most complex internals compared to the round resonators so that would be my thinking.
@@SpeedCultureStudios Yep i do I haven't had the time to pull and inspect any specific components yet but i kind of thought the same thing you mentioned, Biggest exhaust component with the most things that could potentially be damaged. I sent off a few emails this morning waiting to get a response back from both borla and the company i bought the borla from hoping to get some kind of solution asap! Its not fun being embarrassed to pass someone because of your exhaust resonance haha. I miss how pure and clean the exhaust sounded on the first day it was installed.
@@slovwmedia really sucks this happened! Hopefully it’s resolved quickly because it truly does sound great when all is in working order!
Mines similar but I have a Magnaflow 11386 for the x pipe and rights after 2 vibrant ultra quiets and no mufflers in the end. I think I have some cheap 10” length flex pipes from Amazon. I also have 3” oval tips from vibrant that look stock
If you get test pipes let me knoww
@@thade6130 oh shit I didn’t include that. I have 100 CEL Z1 HFC
Where did you get the resonators from?? Link pls
@@VegaBlendz_ I forgot , just look up vibrant ultra quiet resonators 2.5”. Look for the best deal. I think I paid 90 for mine, that was a while ago though. I don’t know how prices are right now
is it possible to add an electronic valve to this kind of exhaust system? this sounds so good but i also dont want my car sound too loud all the time lol
I guess if you wanted to add another set of resonators to make it even quieter then you could put some valves in
Going with the SCS exhaust set up! Do I need test pipes? Prefer to keep my stock cats
You don’t need them but this system is designed for them, so if you keep stock cats it’ll be a bit quieter
What we be the first things you recommend getting first . I plan on gettin the rest down the line i just got my q50 . Great videos too
There is nothing to get "first" really. Its a complete system, so you'd want it all installed together.
@@SpeedCultureStudios i see . Are there any alternatives to give my stock car some sound or life to it for now at least?
@@jalenhampton8036 Just a muffler delete at this point would be good for some added sound! It's cheap and sounds nice with factory catalytic converters still in place.
@@SpeedCultureStudios thanks for the response appreciate the quality info you give
Thank you I truly appreciate al that ur posting for the q50 community. I would like to send u pics of my 50 and all the upgrades that I was inspired by you just don't now where to send the pics
Message on IG
And thanks a lot for following
Can’t seem to find another set of flanges from the link you put out sirr
Dang. They are selling out quick! Check with your local exhaust shop. That is something they should have in stock.
Has anything changed on this setup? Might be doing this setup on my 2012 g37s sedan
I’ve just been recommending the magna flow alternative as Borla has had some quality issues lately.
But definitely an amazing soundings exhuast!! Will be purchasing it allThe tips wasn’t listed with the link?
The tips can be found in the link to my Amazon store. That is the last link
Do all these components work for AWD G37 sedan? Worried about transfer case clearance
Yes, the set up works for all wheel drive. Several hundred people with all-wheel-drive have this installed already.
Hey SCS love your vids but quick question, do you think it would sound good if I got vibrant resonators instead of the Borla muffler?
With test pipes it needs a large resonator like the borla or magnaflow otherwise it will be very raspy
I'm thinking about going with the magnaflow X pipe muffler (part number 11386) it seems a bit cheaper and also sounds good
Should still sound good, but you may have a little bit of rasp, which isn’t necessarily a bad thing
@@SpeedCultureStudios the combo I'm thinking is Berk HFC's, magnaflow X pipe muffler, and vibrant street power mufflers (part number 1146) even tho the vibrant mufflers are straight through I imagine it shouldn't be too loud with the combo of HFCs and X pipe muffler. what's your thoughts?
moto bazuka youre right, the HFCs will quiet it down quite a bit. The vibrant mufflers are pretty good at toning things down too. It’ll sound good but will be pretty tame.
do you have video clips?
I just started ordering the parts needed for my G37S sedan. Cant wait to see how it sounds. Im still deciding which test pipes to buy tho. I want something on the slightly louder side. I was also quoted $240 for install!
$240 is not bad!
But test pipes are test pipes man. No volume difference between any of them
@@SpeedCultureStudios yeah ive been eyeing some berk resonated. So im getting this installed with my stock cats for the moment, would you still recommend those flex pipes? or just until i get test pipes to reduce vibration?
Ending up buying everything already but spent about $410 with tax + free shipping on everything. Unfortunately it seems that everything IS going up in price so I’d recommend others to buy ASAP lol
@@jjamaya01 we are definitely expecting anything steel/metal related to go up significantly this year. Some exhaust shops have said material prices will double by year end
@@jjamaya01 even with cats flex pipe isn’t a bad idea. Your factory y pipe has flex for a reason
Awesome Video. Very informative. I have a Q70 3.7 awd. I am getting ready to install ISR longtube headers but need to choose my exhaust first. I LOVE the sound of your ride. Any recommendations, or should i simply go isr Headers into the exact set up you recommended in this video as shown on your ride? Thank you for sharing the knowledge so clearly! 🙌🏻.
I personally would just go from headers right into this setup. If you're looking for a bit more of an aggressive sound, I would maybe just use the borla and leave the flowfx resonators out. It's a V8 so they sound a bit different than the v6 and don't always require additional resonators.
@@SpeedCultureStudios Appreciate the advice! I have the v6 in mine, same engine I believe as you do in the Q50. Man... i keep watching your initial sound bite in the rain. So good!
I'm tempted to run straight 2.5 inch for the stock cats to the borla in the back to have a violent sound on my 3.7 q50 no resonators. 🤔
It would be loud and sound pretty wicked at wide open throttle but cruising around town it doesn’t sound great. It’s quite raspy with no resonators even with stock cats
@@SpeedCultureStudios do u think the borla in a different location like where the Y pipe was would be a better option? because i kinda don't want resonators 😅
@@heckzatsu2790 the borla does go where the y was. It’s basically a resonated x pipe.
@@SpeedCultureStudios ahh but i could use it sideways and weld tips to the borla and use it as a standard muffler can't i? i think u had a drawing of how u could use the borla in the back instead of Y pipe location
@@heckzatsu2790 yes you could do that
hey! love the vid and the sound, going to order all parts as soon as possible, i just wanted to confirm with you, even though i’m 98% sure i’m right about it, i have 2007 g35 sedan, identical to the 37, and i just had one dumb question just to get out of my brain lol, i would run this normally correct? *not backwards like the 370*
It can be run normally.
The ebay link for the muffler doesnt work. I was wondering if you could update it to make sure i am purchasing the right one?
try searching borla xs pro muffler
hey i just had a quick question, where would the flex pipes be connecting too?
They are welded inline right after the flanges. Just like in the factory y pipe
Question.... Do you have to get your car tuned after getting hi flow cats installed? I keep hearing different things
You don’t “have to” but There is no point in getting high flow cats if you don’t tune it.
I got this set up done with a pair of high flow cats a couple weeks back. It's been great and made me fall in love with the car all over again. However, I noticed that water drips from the HFCs to cat-back flange connection on start up. Is that normal? Or does that mean that i have an exhaust leak? It also smells like exhaust fumes from the engine bay on start up, so leads me to wonder if that is an exhaust leak, or is that to be expected with a custom cat-back + HFCs?
Probably a small leak. And it’s typical with regular gaskets between the flanges. Get some high quality gaskets from z1 and it’ll take care of that
@@SpeedCultureStudios I do have the Z1 gaskets installed already. I'll probably have the bolts re-tightened and hopefully that solves the issue. Thanks!
You said to give more of a aggressive tone & high volume others did what instead of the borla pro xs?
It’s more aggressive because the alternative allows more rasp. It doesn’t make it deeper. Some people like a little rasp. I do not. The alternative is a magnaflow which is a bit smaller. It’s linked in the other exhaust videos
Getting mine done now
Hell yeah
@@SpeedCultureStudios Question. The flow masters replace the stock rear mufflers right?
@@krob8823 yes
@@SpeedCultureStudios Hey boss. Which muffler did you go with? Borla? Or Magnaflow?
@@krob8823 borla but I’d go with the magnaflow now-Borla has had some quality issues lately
Towards the end of the video you mention that there’s another pipe needed for the install what kind of pipe is needed? I got quoted $500 for install was yours $150 with the pipes?
The pipe I referred to is just the additional pipe needed to tie everything together. Prices were a lot cheaper before Covid when I had mine installed
YES YES THANK YOU! I’m doing this SCS setup within the next week! i’m one of those 3.0T guys haha
That's awesome! If you have IG, send me some clips after! Do you have downpipes or is the car mostly stock?
Speed Culture Studios after the exhaust getting a tune...do you have any recommendations? I’m not getting a HE as i live in toronto (canada) heat soaking isn’t a thing up here.
Aris Dixon I would do lower down pipes before tune. Then I’d look into supporting mods. Suspension, sway bars brakes etc
@@____aris hey did you get the exhaust installed n possibly sound clips, I also have a 3.0t n would love to hear it before making a purchase.
Aris Dixon send me a video clip if you can please. I would love to hear it on the 3.0
Any good muffler shops in the Charlotte, NC area?
I would just make the drive down to Inman Muffler.
Which is best for 3.7awd installing it how you initially did or reversing it like how you mentioned for the 370z?
Install it as normal
@@SpeedCultureStudios alright thanks man I appreciate you and your channel a lot🙏🏾super goated
thanks for all your videos, I just got a black 2014 Q50S and watching your videos gives me plenty of ideas and direction! First thing (well actually second as I blacked it out as 1st thing), I'm now looking to improve the sound; don't want to spend more than 500$ and I don't want check engine light - for noise performance is not the priority, sound is... The old G37 sounded good stock; the 2014/2015 Q50 is way too tamed. I've heard about Rev9 axle back or Ark exhaust...any recommendations for deep sound, no drone, no rasp and not too loud?
Hard to find anything under $500 that is not custom
Lol why not just do this
Hey man love the videos, you've been a big inspiration/help with everything I needed to know about my G. I recently had magnaflow HFC's installed with a muffler delete (the delete was temporary until I figured out what I wanted from the resonators to the rear. My shop also did a custom 2.25" Y pipe to replace my OEM as it was leaking. Would you still recommend this muffler & resonator setup with 2.25" piping as opposed to 2.5" and HFC's instead of instead of test pipes?
Yes you could still go this route with a 2.25” y pipe
@@SpeedCultureStudios awesome, really appreciate it!
Do you think the magnaflow without flowmasters would be TOO loud? or do the flowmasters make a big difference in sound? (don’t wanna go with borla because i heard they go bad a lot lol)
Not too loud necessarily (although subjective) it will be a bit raspy if you have test pipes. Borla has had some quality issues lately - with over 3000 people with this setup I’ve only heard of a few problems lately, but the magnaflow is a solid alternative
Love the videos bro, love your explanation as well. I live in a small island and i found a dual inlet dual outlet muffler from magnaflow that very similar to the Borla one you have. Do you think the tone will be similar and should I go for it or not? I just got my q60s 2015 (VQ37)
Thanks for watching man! Yes, the magnaflow should work. Might have a slightly more "aggressive" tone, but will definitely sound good!
@@SpeedCultureStudios Thanks a lot brother, looking forward for more videos!
Sounds amazing. Will this work on the vr30 2016 q50
Yes! I mention that in the video. Sounds good too!
I have a q60s 3.7 AWD. Is there different equipment to use with this?
No same parts still recommended
Hey speed cultures ive got berk test pipes and a Z1 Y pipe can I still do the SCS kit and pair it with my Y pipe
Yes you can simply use the y pipe instead of getting the borla mid muffler
@@kurthigdon8829 that's what I ended up doing I'm using my Y pipe and using 2 vibrant street power mufflers back to dual exhaust tips if the sound is a little to much I'm gonna add some resonators. But my appointment is scheduled for Monday so I'll upload a sound clip when it's done 👍🏿
@@CobbG37x it should sound pretty good it might be a bit quieter than the scs catback. If it drones too much you can throw on the resonators.
So I have a g37x with isr headers, I was thinking to go 3” instead of 2.5. I was told 2.5 restricts power.
No need to go 3” dual on that car. You might get 1-2 more peak hp but you’ll lose torque and that’s what the G needs more than peak hp.
Can you Put a diagram for how this would look like on a 2015 Q60S AWD?
Looks the same