I shoot 168 grain Nosler AccuBond LR bullets exclusively in my 28 Nosler. It loves the handloads, superior hunting accuracy, and velocity is screaming. For that heavy a bullet, I prefer to move up to .308 caliber/diameter cartridges. That's where my .300 and 30/378 Wbys shine.
Great video mate, I’ve just got done building a 28 Nosler on a Bat HR repeater, Bartlein, Bix’n Andy trigger held in a McMillan A6, I’m looking forward to my scope getting here so I can go out and load develop the cartridge. May I ask what powder and charge weight you finished at to have such Stella results?
@@quarterminutemagnums Outstandingly, it is currently on the third barrel and second reamer design. The current reamer spec's have certainly improved accuracy, throat life however.. Is still quite short.
That rifle is shockingly accurate and you did a great job. Congratulations! I am starting a 28 Nosler bench rifle project now. If I may ask, is that just a Saami chamber or did you have a reamer made? How long is the freebore? Also is that a cerakote finish and if so what color did you use? Thanks so much for the entertaining uploads on your channel and the effort you put into it!
Dear Sir - We have all our reamers made to our specifications; made to our specific dummy rounds. DuraCoat not Cerakote - #12 Desert Brown. Thanks.........
Why would you not be able to open the bolt if the bullet was 3300+ FPS? I ask because I have a browning x bolt that is very difficult to open after firing. Usually I have to wait for it to cool and it’s still difficult. I’m shooting factory nosler and hornady at around 3200 FPS I think.
I really want a rifle that I will never need to buy another one again, so what should I get a 28 nosler or the 300 win mag nosler? I won’t it all distance and power...
"Hey don't take that target down done even touch it!" hahaha. That is a prized non cherry picked group. Amazing cartridge and amazing build. How much powder are you putting behind that? What percentage of the case capacity are you using?
Somebody's down range near the targets, while he's fumblin' around with that rifle, and not clearing the range?? Accuracy is one thing, range safety quite another, but infinitely more important!!
@@quarterminutemagnums with a Bench mark barrel I am getting about 1000rds before things open up..I’d appreciate knowing the type and load of powder. My efforts with reloader 33 and the 195 were not that good.. 1/9 twist so 195 May have been too much. My Bartlein is on its way but this one is 1/8.5
195 grains for a 7 mm rifle - extremely heavy. No doubt that 28 Nosler is way above even 7 mm Wby, still I would not agree to any rifle under 9.5 lbs...
@@quarterminutemagnums Yes Sir, totally agree, never was good with light rifles in powerful calibers, assume the powder charge is almost 80 grains.......
28 nosler is my favorite Magnum caliber!! Its a long range demon!
Incredible! Nice work!
Dear Sir - thank you.
Thanks for sharing!!!
Dear Sir - appreciate the feed-back.
I shoot 168 grain Nosler AccuBond LR bullets exclusively in my 28 Nosler. It loves the handloads, superior hunting accuracy, and velocity is screaming. For that heavy a bullet, I prefer to move up to .308 caliber/diameter cartridges. That's where my .300 and 30/378 Wbys shine.
Dear Sir.........thanks.
What neck did you go with? Mine has a .314
That’s a damn tack driver!
Dear Sir - actually the man who purchased it is shooting even better groups..........................thanks.
Very nice
Dear Sir - Thanks.
Great video mate, I’ve just got done building a 28 Nosler on a Bat HR repeater, Bartlein, Bix’n Andy trigger held in a McMillan A6, I’m looking forward to my scope getting here so I can go out and load develop the cartridge. May I ask what powder and charge weight you finished at to have such Stella results?
Well most 28 nos like them berger 180s and up.. H1000 and retumbo is what we found it likes.
Dear Sir - how did it turn out ?
@@quarterminutemagnums Outstandingly, it is currently on the third barrel and second reamer design. The current reamer spec's have certainly improved accuracy, throat life however.. Is still quite short.
@@danmacdonald1291 Dear Sir - understood. Thanks.
That rifle is shockingly accurate and you did a great job. Congratulations! I am starting a 28 Nosler bench rifle project now. If I may ask, is that just a Saami chamber or did you have a reamer made? How long is the freebore? Also is that a cerakote finish and if so what color did you use? Thanks so much for the entertaining uploads on your channel and the effort you put into it!
Dear Sir - We have all our reamers made to our specifications; made to our specific dummy rounds. DuraCoat not Cerakote - #12 Desert Brown. Thanks.........
Why would you not be able to open the bolt if the bullet was 3300+ FPS? I ask because I have a browning x bolt that is very difficult to open after firing. Usually I have to wait for it to cool and it’s still difficult. I’m shooting factory nosler and hornady at around 3200 FPS I think.
Dear Sir - Hard bolt lift almost always equals excess pressure. Almost........there can be other issues.
What powder are you using?
The black stuff............
How would you compare the 28 nos verse 7stw ?
Dear Sir - owned both, 28 Nosler has better brass.......thanks.
I really want a rifle that I will never need to buy another one again, so what should I get a 28 nosler or the 300 win mag nosler? I won’t it all distance and power...
Dear Sir - without a LOT more information, there are simply too many variables to answer that question definitively.
Why do you put one in the dirt? Cause cold bore shot?
Dear Sir - fouling shots are just standard procedure for bench-rest shooting.
What is better 28 nosler or the 300 win mag nosler? I really don’t know
Dear Sir - there is no "better" - only "better" for a specific task.
What kinda powder you using.
We don't like to give load data for liability reasons. But, it is listed in the newest Nosler manual. Thanks...............
Thanks didnt want the data i understand every gun is different..i was just wondering about the powder... thanks
Quarter Minute Magnums Q.M.M. OK
Please that printer I’d so loud. Technology is much quieter now.
Dear Sir - Oehler 35P, still nothing better.
Gday qmm how would you compare the 28nosler against the 7mm rum
Dear Sir - 28 Nosler has better brass quality; better case design. Thanks...............
@@quarterminutemagnums thanks Qmm
What about powder adjustments? Never mention that
Can't remember.............thanks.
"Hey don't take that target down done even touch it!" hahaha. That is a prized non cherry picked group. Amazing cartridge and amazing build. How much powder are you putting behind that? What percentage of the case capacity are you using?
Somebody's down range near the targets, while he's fumblin' around with that rifle, and not clearing the range?? Accuracy is one thing, range safety quite another, but infinitely more important!!
Bigfoot ?
How would one contact you about a rifle build?
Dear Sir - all our contact information is on the website.........Quarter Minute Magnums.......thanks.
Whats the barrel life with that sort of speed
Dear Sir - Who knows ? Rifle still has less than 200 rounds fired. Thanks.....
@@quarterminutemagnums with a Bench mark barrel I am getting about 1000rds before things open up..I’d appreciate knowing the type and load of powder.
My efforts with reloader 33 and the 195 were not that good.. 1/9 twist so 195 May have been too much. My Bartlein is on its way but this one is 1/8.5
@@alexpenner2396 Dear Sir - go to our website, targets and data are there. Thanks.
195 grains for a 7 mm rifle - extremely heavy. No doubt that 28 Nosler is way above even 7 mm Wby, still I would not agree to any rifle under 9.5 lbs...
Dear Sir - heavy bullet, large powder charge, high velocity = recoil.
@@quarterminutemagnums Yes Sir, totally agree, never was good with light rifles in powerful calibers, assume the powder charge is almost 80 grains.......
why dosent your 28 kick up attol
Dear Sir - please put down the beer and try again...........thanks.
You can't make a Nolser and not shoot Nosler bullets 🤣
Dear Sir - have shot a truck load of Nosler bullets, but not at this level of accuracy. Thanks.