ฝัง
- เผยแพร่เมื่อ 22 เม.ย. 2021
- I show you how to level your mower deck on your Husqvarna YTH22V46.
Thank you very much for watching and God bless
**Ratcheting wrench Metric and standard amzn.to/3x99eyM
Bible ESV easy to read amzn.to/3qshNQP
Bible NKJV amzn.to/30ns322
Titan solar generator (large solar generator) poweredportablesolar.com/ref/48/
Go pro that i use amzn.to/2WC6WXH
my wireless mic Rode wireless Go amzn.to/2WxQt7c
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
*Disclaimer - Thank you for visiting my TH-cam channel. Please understand that the content on the DIY jim TH-cam channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my TH-cam channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my TH-cam channel.
#levelyourhusqvarnalawnmower #Husqvarnalawnmowerdecklevel - แนวปฏิบัติและการใช้ชีวิต
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/f4NVKlZ5qkk/mqdefault.jpg)
****CLICK READ MORE****
Here is a link to the nice ratcheting wrench I used.
Thank you very much for watching and God bless
**Ratcheting wrench Metric and standard amzn.to/3x99eyM
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
*Disclaimer - Thank you for visiting my TH-cam channel. Please understand that the content on the DIY jim TH-cam channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my TH-cam channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my TH-cam channel.
Great video just what I needed to see I know my decks out of alignment so this should fix it right up thank you
@@rkharbaugh3 it should help thanks for watching
Lionel need fixing fix my John Deere
Now I can stop digging into my grass.
I’m a widow and learning everything about how to maintain and fix my outdoor equipment. Your video was extremely helpful.
After putting on new spindles and blades I took apart the rear adjustment arms (they had craftsman 20 mm sockets on them along with rusted bearings). I also rebuilt the carburetor on the Husquivarna YTH 24V48. The springs were not fun on this one.
After looking at a parts diagram I quickly determined the idiot at the repair shop had no idea what he was doing. Now I own two extra craftsman sockets he had on the rear adjustment arms trying to level the mower and I have a level mower.
Thanks again for such a clear, descriptive video and thanks for letting me know what tools I needed in advance.
Glad I could help you Robin hope your having a good weekend.
Thanks for a great detailed video.
I decided to go for 3 1/8" in the front and 3 5/8" in the rear of my 46" deck. That should be the maximum height to go as it comes real close to my belt rubbing but, time will tell. I should be barely safe with the belt. My front was at about 2 3/4" to start and the rear was 3 1/2" to start, so, adjustment was in order. Been that way since new and I have 72 hours on it. Great tractor for sure! BTW, I run LEADED 'NON corn alcohol' fuel that I get from a gas station near me. I run it in all my small engines as it's a safe alternative and it stores much longer without gumming up as with Unleaded corn alcohol fuel, and my hoses will be just fine. ALSO for those who don't know, the triple bagger for the 48" decks will fit the 46" DECK mowers. Usually the 46" decks are two baggers. I found out by mistake when I bought the triple bagger and it fit great. When I went to look for a new rubber part for the chute, the triple baggers said for 48" decks and double bagger for 46" decks. Boy was I happy to learn my mistake was a perfect fit! The more bags the better and the longer you get to mow in between dumping's.
Thanks for watching
Thanks, you got me mowing again. I watched a few different videos, but your’s was straight forward and most helpful.
Glad you like it, thanks for watching
Thanks for making this video. I tried the steps in the video on my Craftsman 46 (Husqvarna) and saw a great improvement! No more stairstep cuts. Thanks again!
Glad it helped!
Thank you! Your video was super helpful and easy-to-follow. I'm generally not too good with repairing things, but you made it simple. Our lawn should look much better after this adjustment!
You're welcome! Thanks for watching
Great video! Thanks for show how to fix deck issues!!
No problem! glad to help
Used your instructions and leveled my deck for the first time (I am seventy something). It went very smoothly. Thank you for making this video. Much appreciated. And I am subscribing.
Thanks for subscribing glad I could help
Thank you, Sir. Very simple and straightforward.
Thanks glad you like
I have used your video several times to review this procedure. Thank you.
Welcome thanks for watching it several times. Crazy but sometimes I watch my own videos also lol
Last step I needed to complete my rebuild. Thanks!
Welcome
Same procedures for my Husky TS 348 XD; good vid - very simple and straight forward. Good job!
Thanks
You just made my job a lot easier thank you.
Glad I could help, thanks for watching
Once again I use your video instruction and nothing goes wrong! Thanks 😊
Awesome thanks again for watching my videos
Great video. Professional done! Such a clean mover!!
Thanks
Well,people like you are a genuine good human being who wants to help his fellow human (man),don’t come across many,than you and god bless you,will keep watching,thanks again mate👍
Very nice comment. Thank you very much. And thank you for watching.
The Best and easiest instructions I have ever seen. This guy should have his own TV show.
Great Job..👍👍👍👍
Thank you very much I put a lot of work into my videos. Thanks for watching
@@DIYJIM
I’m not very mechanical in the areas of riding mowers. I was having this exact problem today while cutting my grass. I noticed that the deck was not even. I came in the house and looked on TH-cam and I found you on my first search.
And I watched your video and went back outside and I did exactly like you instructed and it worked.
@@elvispreston8954 awesome glad I could help
@@elvispreston8954 awesome glad I could help
Short and sweet. Thanks as the manual doesn't have this info. Great video.
You're welcome!
Very easy to follow and right to the point.
Thanks
Thanks for the video! always wondered how to level the deck
Glad I could help Doug
Thanks. Great directions - oral and visual presentation easy to understand. God bless you!
thanks for watching
Nice one Jim. It's pretty easy once someone shows you how to do it.
Glad I could help thanks for watching
Hey thanks a lot for that video, you're awesome, I have to level mine today, it's cutting scalping my lawn a little bit have a good one!!!
Thanks hope my video helps
Hi, yes it worked great,my mower was way off,it actually took me a couple hours ,taking breaks, didn't have the 3/4 " deep socket,but took my time and got it right,thanks again,have a good one!!!
@@gaucho5204 awesome
I needed to watch this years ago. Thx
glad to help
Me too
Thank you very much. You do a great job of teaching.
You are very welcome
Very informative and to the point!
Thanks
My deck is a little different but, still the same idea. Thank you!!
Welcome thanks for watching
Nice to work on a brand new mower, blessings
To make the job a little easier, cut 3 or 4 blocks of wood at the right size you need and mark the sizes. That way your not fighting with a tape measure. Thanks for the video.
I did that with my John Deere thanks for watching
@Jeff Haddan I though about that as long as the mower itself is level. I was just going by the manual. Not everyone has a level. Thanks for commenting and watching
GREAT EXPLANING AND PICS THANKS VERY MUCH U WERE A LOTTA HELP NOW I MOW EVEN THANK U,,,
Glad to help
Thanks, great explanation!!
Your welcome thanks for watching
Appreciate the information 👍
No problem 👍
Very helpful, straight-forward information.
Thanks for watching
Thank you for this! Didn’t know you could raise and lower the deck.
Thanks for watching
Thanks mate I will try it today. 👍
Hope it helps thanks for watching
Very informative thank you
Your welcome
the best chuck it out the mower I have ever owned.
Thanks for watching
Great video, really needed this.
Thanks for watching
YOU ARE APPRECIATED! YOUR VIDEO WAZ GOLD STAR FOR ME .
Thanks
Very helpful thanks so much
Your welcome
Great info, appreciate you!
Glad it was helpful!
nice one. thanks for the tips. great info. Frank
Glad I could help
Thank you, sir! This answered my question.
Awesome glad I could help
Thanks for the video. I have felt like mine was off ever since I bought it new last summer, It seems to cut much lower than my previous mower even at the highest level
Your welcome, thanks for watching
Ty for this.
your welcome, hope you are having a good summer
Just watched this video. Great information and will be trying it soon
Thanks for watching
Good stuff!
Thanks!
Thanks for the info.
Your welcome
Thanks a lot!
Welcome!
Great info 👍👍
Thanks
Thanks Jim, it was a toss-up between you and Dennis, so I watch both and the tutorial was brilliant, Thanks, I have subscribed.
Thanks for subscribing Andrew
Good video. My Husqvarna has two adjustments in the rear, one on each side, and one in the front. Thanks
That sure sounds easier, thanks for watching
Anoterh Awesome 'How To' video by DIY Jim! Thanks Jim, I'm learning a lot from you!
Thanks again for watching my videos
Very helpful. Thanks so much.😎
Glad it was helpful!
Thanks, you were a great help. 👍👍👍👍👍
Thanks for watching
Hey Jim you do a great job!
I have damage to the wiring harness due to a mouse or something. Will have to buy the entire harness? Two wires ( gray and black) are chewed in two on the harness and on the other side.
Thanks, I am trying to get better at this TH-cam thing.
Much appreciated!
No problem!
THANK YOU FOR YOUR HELP
Welcome thanks for watching
So very helpful.
Glad it was helpful!
Another great video of yours that has helped me. Not sure if I missed you saying it but, it’s probably worth noting that you had your deck raised to the highest setting before you started adjusting everything. Keep up the great work!
Thanks for watching my videos
Thank you for an extremely helpful and informative video, also the oil change video was very helpfull and informative
Glad it was helpful!
That was helpful
Thanks
Excellent Tutorial. (Even I can understand it!)
Thanks for watching Dan
Helpful video. Thanks
Welcome thanks for watching
Well done thanks & appreciate you.
Thanks for watching
Great video very informative
Thanks
Thanks - i was changing a tire and left my mower on a crane - the weight shifted the bolts and lowered cutting deck -
Thanks for watching
thanks! I gave you a thumb-up. I found mine was right at 2-1/2" at the front. I wanted to raise it a 1/2" any-way, cause it cuts too short.
thanks again!
PS, mine is a 2013 22V46.
Glad it helped!
Thanks for video
Welcome thanks for leaving a comment
Your awesome!!! Save me a lot of time>
Glad I could help!
good video, instructions were quick and easy to follow. HTY series? lol. Happens.
I noticed that, thanks for watching
Thanks a lot
Welcome
thanks!
Welcome!
Thanks👍
Your welcome thanks for watching
Good video.
Thanks for watching
Good to Know thanks.
Glad to help
Great video, thank you very much! In the video, I noticed that your deck height selector was at it's "max deck height" position (number 6), when you were showing us how to do the adjustments.
My question is, "Is 3.5 inches in height for the rear of the deck at max height, listed by Husqvarna's factory service manual as the correct height for that setting? Thanks for any reply, and thanks again for the lesson. 👍
This was my neighbors mower not 100% sure. I would have to check the manual. Sorry I couldn’t answer better. Thanks for watching
I have a YT 42XLS, I bought used, without a user manual. This helps! Thank You! BTW, the middle of the 3 (sharpened) blades is leaving a trail of partially uncut grass, and I have to go back and mow it twice. Any suggestions?
Sorry not sure maybe with three blades it gets leveled different. Sorry I can not help
@@DIYJIM Ok, Thank You anyway! 🙂
Thanks for the info. My husqvarna was not same height left and right side from factory. Why do they want front to be lower than the front?
Making the front lower will help so you do not double cut your grass that would give you brown tips. Thanks for watching
What did you have the mower height setting at. From your video it looks like it is set on the highest setting?
It does not matter what the height is set at when you make adjustments because there is only one adjustment from side to side then one in the front.
Good job, help me alot
glad I could help
Do you leave the deck all the way up when adjusting
@@richardsloan1217 I don’t think It matters just so both sides are the same when your done
Nice
Thanks
Not everyone has a four foot level. The basic process is the same for all makes - put your tractor on a level surface, measure the height of the deck rim first on both sides and adjust using the rods... then measure in front and in back and check which hole the front support arm should be in to give a slight rise in front.
Did I even use the level? Thanks for commenting
Gonna try
Hope my video helps you, thanks for watching
Last week my Husky started self destructing as I was mowing. A major weld broke from the bracket holding the deck. When it was welded they missed the seam completely and the weld was also cold. Sure wish I had bought another MTD!! Husky sucks! This is also a replacement mower. The first one had the transaxle replaced three times!
Holy smokes, Thanks for watching
Did you have the deck in the full “UP” position when making your adjustments??
It does not matter just make sure they match when your done.
Great video! Would it make a cutting difference if the entire mower deck was even all around? For instance, 3.5 in the front and 3.5 in the back.
Never tried it, I think it is better if the front is lower
@@DIYJIM Thank you for your quick response. I am going to make the adjustments. I am tired of my Husqvarna unevenly cutting my nice Bermuda lawn.
Thanks
Welcome
I have the adjustments right but for some reason it is still leaving a strip of grass when I cut. For some reason also my anti scrap wheels are not even. The right and left front are not even. Any advice?
Watch this video for your scalp wheels th-cam.com/video/viv-LW7bPCo/w-d-xo.html hope you did not bend one of your blades.
@@DIYJIM I went back and checked my blades and they are bent. Didn’t think of it until you mentioned it. Thanks.
My leveling nut at the rear is maxed out at the top but that side of the deck is still 1/2" low, is there anything else I can do to level the deck?
Only way I know how to do this is what I show in the video. Maybe something is wrong with your deck. Hope you get it figured out
Wait, What??? That thing isn’t green?
Great video and needed as grass trimming will begin in a week or so up Heyah in Maine, Ayuh...
It’s my neighbors thought I could make a couple videos and help him out. Thanks for watching my friend
What number is your deck height lever in during this measuring ?
you can have it at any level when checking if your deck is level.
I have the same mower and last year I hit a rock while mowing the ditch next to the road and bent a blade really badly. It also broke the spindle. So I just replaced the spindle and blades and the deck was uneven. It only had an adjustment on one side and I had to max it out to make it even. The belt was ruined by the broken spindle so I replaced it as well. Now the weird part…when on the highest setting the blade is now engaged and I can’t even turn the engagement lever to the position it is supposed to be in for blade engagement. I’m not sure why but I actually like it a little bit because I don’t have to disengage the blade to back up anymore which always annoyed me and the height is perfect for the way I like to cut my grass anyway. And when I hit a tall and thick spot I can just press the engagement lever towards the position for engagement and it prevents the belt from slipping and powers right on through it. I am going to take a look and see if I can figure out what is causing this I guess but I had to get the grass mowed before it got completely out of control and like I said I kind of like the way it worked. The only thing is that I can’t disengage the blades so it could be a little inconvenient at some point. If you have any ideas why this might be happening I would appreciate your input and thanks for reading this long comment. I appreciate your videos and I have found them helpful! 👍
That was a long comment. Thank you very much for watching my video. Sorry I really could not guess why this is happening. Hope you get it figured out. Have a good summer.
@@DIYJIM I appreciate the quick response and you have a great summer as well!
When you are doing these adjustments, what level setting do you have the deck lever set at? (Or does that matter?)
It does not matter, just make sure both sides Measure the same height. Thanks for watching hope this helps you
@@DIYJIM
Ok awesome! Thanks for getting back with me so fast and thanks for this great video. I will be checking out your others and you just gained another subscriber! Have an awesome and blessed day.
Thanks for the new subscriber
Worked like a charm! Thanks for your help!!!
Your welcome
My question is where is the right rear adjuster supposed to be set at? My deck seems really low on that side.
There is only one adjuster just make it even with the other side.
So what do you do if you can't equal out the rear the right side or the side with no adjustment is always lower
Make the other side lower and then other side should raise slightly. Hope you get it figured out
What deck height setting do you put it on before you measure to raise or lower. Thanks in advance
Just saw J mays same quest and your reply. Great vid. Keep it up
Glad I could help thanks for watching
Good job teaching us but what about the spacer nut in the front. Is the nut supposed to be rounded? Thanks again for the help
I think I showed that in the video. It should not be rounded
But DAMN those guns though
Thanks