had my firmware stock at 1.3.4. and thought i had to tell this toolkit MY firmware. and that it really ment what firmware i wanted xD thanks! finally got it updated for 1.3.8 with a few tweeks with OP firmware. :) just getting the scooter to charge. and time for a drive tomorrow to see if it can go uphill better :D again. thank you sooooo much! time to enjoy freedom! :'D
Great info, Doug! Here in the U.S., Swagtron will be selling a clone as the Swagger 5. Maybe hackers can work on it to see if such custom firmware is possible on it too.
thanks for letting me know about this clone. i dont think i would call it a clone, more like heavily inspired. it looks like its running a hoverboard wheel as a motor. i dont think this swagger 5 is worth the $100 savings. 45% bigger battery in the m365 should enough to justify the extra $100. the display is nice but i question the accuracy of it. id like to see a gps confirmed 18mph top speed. i would suggest the Xiaomi m187 for the $100 savings, but i dont think you can buy it anymore. IMO the quality and finish of the M365 looks much better. i dont think hackers would bother with this unit, it doesn't look like it will be a popular unit to justify the time and effort
There's a TH-cam test video. Range is awful, probably cheap Chinese batteries. Swagtron doesn't create or design, they buy from China. So there's a factory churning them out. Archos has picked it up too from that same factory: atomicsupermen.wordpress.com/2018/02/21/archos-creates-its-own-android-powered-electric-scooter/ Swagtron's carbon fiber scooter is directly from China too.
Instant mode switch: very simple function causing switching modes Normal/Eco immediately after double press of power button, during a ride. So difference is that you don't have to press throttle or brake to confirm change of mode. That's all. I recommend to keep it OFF because this function could provoke dangerous situations because of rapid speed change when your hand is away from the handlerbar.
Hi Doug! I follow you here now for while. Thank you for your great work! Last week I found the Custom Firmware Toolkit myself and I was going to tell you about. Too late you found it yourself. I created a patch-file with the following parameters: - Base FW 1.4 and BMS 1.15 - Preset DYoC (except adding instant mode switch Eco and Normal) It works a lot better and smoother than the Russian CFW200_W on my M365.
Cfw w runs at 27877 but it also says on the site Too much power is not recommended for battery and motor life, stay above 32000. So is cfw w bad for the scooter which one do you use ?
Thanks Doug. I'm on the original 1.4.2 driver version. Is it possible to change directly the firmware with botox or will I have to downgrade first with another method? I like your videos a lot. They are simple a very informative. Thank you
Why can't we get higher than 34kph? I wish we could set the amperage limit but still be able to spin the motor to any speed. I really want to find something where I can watch motor temperature controller and battery. Cuz in theory in short bursts the motor can handle what... 1000 Watts... 2000 Watts? And I don't want anything that crazy. I just wish you could control Power output based off temperature.
excellent video, I just have a question, you mentioned that the version 1.4.0 is not as stable as 1.3.8. I am on 1.4.0, should I downgrade to 1.3.8 or I can just create my cfw using the 1.3.8 option but still flash it to my current 1.4.0 version. hope I didnt confuse you thanks
i have never adjusted that bolt before and have always used a 3d printed piece or a sheet of plastic cut to fit and glued down. that seems to have gotten rid of the noise for me
"If you want to connect a custom battery with a higher voltage." I do not understand, another battery have a different capacity, but not volts. the unit in the M365 is only for 36V. May cause destruction if I left active choice when I have a standard battery? Thanks for the answer.
PLEASE tell me someone here has figured out how to get passed that 'sent retry / cancelled' error. I can't do anything. Everytime I try to downgrade, I get this error, and then have to unlock my scooter using the '000000' code.
Do you have any experience on the ES website and ES_downG app? Its made by the same maker but I don't wanna flash my scooter in a way that wasn't meant for my scooter specifically and meant for a scooter from another brand. So it would be awesome if you could make a video on the ES downg
In "Xiaomi Mijia M365 Custom Firmware Toolkit" --- Will I get EBS / Motor Braking with the Brake-Lever if i increase the KERS minimum speed value to 28 Km and PATCH- with everything else as DEFAULT 1.3.8 ??? .... Thanks a lot.
I have the experience that if the KERS scooter is set up with the firmware configurator at 35 km / h the Scooter will start to slow down around 30km / h. Even if the gas is released and the bouncing off the hill at this speed, the engine is braked. Do you have the same experience? In addition, Russian CWF_W brakes are aggressive. This will come to me dangerously. Do not know how to change it?
Hello, why do you they recommend bms 115 over bms 107? I get 19mph at 100% battery life with bms 107 and 18mph with bms 115 so why do they recommend bms 115? Thank you for any info. New to this.
I tried it by changing only the maximum speed. I didn't change anything else. Does this custom firmware also voids the power decreasement of the stock version after reaching 50% or less battery charge?
These videos you make are very helpful. Thank you. I have a question. I've already downgraded to 1.4 and use the 107 firmware ( it's supposed to be made by xiaomi? ). I like the power it provides uphill. I want to use the default firmware with the low speed limit and all (mabe it will save up some battery) and add the 107 power setting. Is it possible to find out the number I need to put? Also I don't notice any problems with the 1.4. Do you still recomend the 1.3.8?
Hello, could you explain about this new added feature? Remove hard speed limit of 35km/h: Removes code which checks that the speed is below 34.78km/h (12000/345). Thank you!
Hi Doug, thanks for the vids. I have tried 200cfw + bms107 and DYoC + bms 115 but it seems I can't get to 30 km/h. Any idea what to change or to adjust?
im not sure. is the acceleration better than original? check your tire pressures. make sure they are at least 45psi. and also make sure you are NOT in eco mode. my personal favorite is 200cfw and bms107 form my older video th-cam.com/video/UqsqTERDwSU/w-d-xo.html
Doug Hnut the acceleration is better and air pressure is high as well. I have changed some settings and flashed again and now I get 30 km/h when running the front wheel at home. Will check it out later outside and with me riding the scooter. But looks promising so far. ;)
Question? Unlocking and riding the ES1, ES2, ES4, Electric Scooters via related apps with android/apple smartphones; Is this thee only way to ride the scooters? Is there a way to just press the power/dashboard on/off switch after they've been fully charged and unlock from dashboard and go? Does this make sense to anyone; Or is this a bygone era (simplicity)?
This shouldn't have too much of an effect on the motor/battery. This just changes the speed limit, not the motor power. So normally when you reach 25 km/h it will decrease the power consumption in order to keep this speed. So, by increasing the speed limit you shouldn't end up damaging your motor or battery, no matter how high you set it. Of course it will wear out faster, but shouldn't damage. Because the power consumption can still only be a certain amount. That's what the "Motor power constant" controls and changing this would be risky.
Hi Doug, Can you explain, please. 1. How 'Instant mode switch' work exactly 2. If I want rollback to stock version should I run BMS115.bin and that all?
i still have not played with " instant mode switch". my guess is that it will stay in eco mode and limit top speed and acceleration until you go full throttle, then you will be in normal mode yes if you want to roll back, go with bms115 and 1.4.0
The instant mode switch is exactly what it stands for :). If this setting is enabled, when cruising on normal mode, after double pressing power button u will get ECO mode instantly. Otherwise, there is a delay if the setting is off.
Marcin T I don't think that would be safe because kers does most of the braking. But it is possible. Have to disable the wires going to the brake lever.
Thanks :) are there any repository’s where we can try out and rate ones people have created ?, how long do these scooters tend to last I’m at about 1200km at the moment just curious
I've gone through the motions on everything and when I try and 'flash' the app just says 'retry' many times. I'm obviously missing something and being a doughnut!! M365 production date 22/11/2018, Firmware version 1.5.1 model ending -11829. Can anyone shed some light? Many thanks
just to ask.. did you ever tryed to mount 10inch tires? wich tires are you using? original ones get punctures too much easly, i repaired 10 times maybe in one year... i'm going to mount 10inch tyres, bought from a russian store
i have never tried 10 inch tires, i heard you need to raise the rear mudguard and lower the kickstand and do something to the front fender in order to run the 10" tires. im using the original tires, and have repaired the rear 3 times. ive tried solid tire in the rear and they are no good, went back to the original a few weeks later. i have "green slime" gonna try that once it gets here. heard good things from that.
I just got back from riding and the solid tires with holes in the sides works really well as rear tires. Don't ever have to inflate the tires and no more punctures: ae-cn.alicdn.com/zFb7FA3VvR9qYBQ2xR3/N8ovwpbUKigm4GzEPrb%40%40hd.mp4
aragorn318 I tires solid tire with NO holes in the rear before, and I found they worn quickly. Didn't like them at all. Let us know how they after a few hundred kilometers.
I've had my scooter for 9 months now and I've made this same mistake before too from following after many comments and videos I've seen. But microwaving and then cooling afterwards left my solid tire deformed, bumpy and unrideable. I had to cut if off and I followed the video that I provided above with my new solid tires.
Rear solid tire working better and better. Just replaced the front to solid tire with holes as well. The russians know their e-scooters. Check out the tires: www.rbth.com/lifestyle/328422-how-rent-electric-scooter
Will there be a problem if i open the mi home app after i changed/flashed the firmware?Can i still see battery level and other thigns or should i start to use a new program?
aragorn318 currently my favorite setup is exactly what you are using. 200cfw and bms107. When summer gets hotter , I might need to change , so the motor won't overheat
@@DougHnut Thx for all the great info. I'm running cfw200_w bms107 and very happy with it. Just curious are you still running the same setup or have you changed? Asking since I'm little interested in testing this software.
The site got a update wich explain the motor power, it says not use below 32000 ... I was thinking in 35000 , is there any rule for this number? ( All 4 looks like a magic number =p)
i reach 550KM but my battery damaged after i buy full wheel.. but i know how fix it :) . when i send it to repair.. its back same.damaged..then dont know how to fix..
There's a hidden unlock code that requires you to use the MiHome app. In the app, change your password to anything, then close the app so the scooter disconnects. Then go back in the app, connect the scooter, and change your password to "000000" - six zeros. That will unlock it. If it doesn't work the first time, it's being glitchy - try again. keep 'changing' the password to 000000.
From Arkadiusz: Instant mode switch: very simple function causing switching modes Normal/Eco immediately after double press of power button, during a ride. So difference is that you don't have to press throttle or brake to confirm change of mode. That's all. I recommend to keep it OFF because this function could provoke dangerous situations because of rapid speed change when your hand is away from the handlerbar.
Thanks for all your videos on M365. i've reached the 1000km yesterday and i used your guide to try different firmware. first i tryed was CFW_W. Now i'm experiencing this problem with charge. i dont know if i broke something internally or is something caused by the firmware. I will appreciate if you will suggest me what to do. thank you: here the problem: /watch?v=cJotL68Gees
possible battery charge connector issue, you might need to take the cover off to check the connector th-cam.com/video/d5nU6hd1HXI/w-d-xo.html skinny red black wires on the top
maybe is a coincidence . maybe some false contact in wires.. my city is full of Lava Stones, so many stress on wheels and body.. and i'm also using shitty solid tyre... untill 10inch tires arrive ;)
Yes you can. Just flash to stock files. Or use the mi home app to update to stock firmware. But it's a bit harder to go back to an older firmware after you update to 1.4.2
Hello Doug, can you help me with a setting? * I want my ECO mode, to have the same acceleration as the "sports mode" (very fast), but still keep the same ECO top speed. What do I need to change? Thanks mate. Great channel
you will need a bigger and higher voltage battery and aftermarket controller to go faster. www.dochello.ru/ they can do it. but if you want to go like 50 kph or more then i would suggest getting a different scooter like the luna cycle apocalypse
Just run the Mi Home App and it should auto detect that there is a newer Firmware version compared to your 1.3.3 then just do the upgrade from there and that will put you back to the original settings.
tryed to translate russian from FERRY whatsapp group for an ENTIRE YEAR..and then.. YOU!
Oh THANK YOU! finally!
That HELLO guy in Russia has a bunch of TH-cam videos too. Like you, I wish there were English versions. He's really into modding the M365!
had my firmware stock at 1.3.4. and thought i had to tell this toolkit MY firmware. and that it really ment what firmware i wanted xD thanks! finally got it updated for 1.3.8 with a few tweeks with OP firmware. :) just getting the scooter to charge. and time for a drive tomorrow to see if it can go uphill better :D
again. thank you sooooo much!
time to enjoy freedom! :'D
Thanks for the new vid Doug, I too was hoping to be able to mod the aggresive brake behaivour. Hopefully that'll come along soon.
Great info, Doug! Here in the U.S., Swagtron will be selling a clone as the Swagger 5. Maybe hackers can work on it to see if such custom firmware is possible on it too.
thanks for letting me know about this clone. i dont think i would call it a clone, more like heavily inspired. it looks like its running a hoverboard wheel as a motor. i dont think this swagger 5 is worth the $100 savings. 45% bigger battery in the m365 should enough to justify the extra $100. the display is nice but i question the accuracy of it. id like to see a gps confirmed 18mph top speed. i would suggest the Xiaomi m187 for the $100 savings, but i dont think you can buy it anymore. IMO the quality and finish of the M365 looks much better.
i dont think hackers would bother with this unit, it doesn't look like it will be a popular unit to justify the time and effort
There's a TH-cam test video. Range is awful, probably cheap Chinese batteries. Swagtron doesn't create or design, they buy from China. So there's a factory churning them out. Archos has picked it up too from that same factory: atomicsupermen.wordpress.com/2018/02/21/archos-creates-its-own-android-powered-electric-scooter/ Swagtron's carbon fiber scooter is directly from China too.
Instant mode switch:
very simple function causing switching
modes Normal/Eco immediately after double press of power button,
during a ride. So difference is that you don't have to press throttle
or brake to confirm change of mode. That's all.
I recommend to keep it OFF because this function could provoke dangerous
situations because of rapid speed change when your hand is away from the handlerbar.
Hi Doug!
I follow you here now for while. Thank you for your great work! Last week I found the Custom Firmware Toolkit myself and I was going to tell you about. Too late you found it yourself. I created a patch-file with the following parameters:
- Base FW 1.4 and BMS 1.15
- Preset DYoC (except adding instant mode switch Eco and Normal)
It works a lot better and smoother than the Russian CFW200_W on my M365.
You're welcome! im happy it is working well for you. that's the best thing about this program, customize it to the way we each like it.
Thnx for the info! gonna digg more into it when i get mine
4:40 afaik the brakes are fully mechanical, you can tighten it for more breaking power, its not a firmware thing. but i could be wrong
Cfw w runs at 27877 but it also says on the site Too much power is not recommended for battery and motor life, stay above 32000. So is cfw w bad for the scooter which one do you use ?
I have BLE73 can i use it anyway or i need tp down grade to. 71 help me please
Tried the Botox flash on a US version 16349 - it worked well. No issues so far. Still don't know if it's 1 or 2 fuses in the BMS.
Good to know Thanks!
Doug Hnut should I use BMS 115 or BMS 107?
And what maximum speed did u set up ?
Thanks Doug. I'm on the original 1.4.2 driver version. Is it possible to change directly the firmware with botox or will I have to downgrade first with another method?
I like your videos a lot. They are simple a very informative. Thank you
Why can't we get higher than 34kph? I wish we could set the amperage limit but still be able to spin the motor to any speed. I really want to find something where I can watch motor temperature controller and battery. Cuz in theory in short bursts the motor can handle what... 1000 Watts... 2000 Watts? And I don't want anything that crazy. I just wish you could control Power output based off temperature.
excellent video, I just have a question, you mentioned that the version 1.4.0 is not as stable as 1.3.8.
I am on 1.4.0, should I downgrade to 1.3.8 or I can just create my cfw using the 1.3.8 option but still flash it to my current 1.4.0 version.
hope I didnt confuse you thanks
Up for this
I think so, but am not sure. I know it's a lot harder with 1.5.0 and above.
I had 1.4.2, simply selected the 1.3.8 option and basically the full CFW Weak settings then just flashed it, works PERFECT.
this path looks like so much fun
Kevin Minato nice and smooth for esk8 ;)
Doug Hnut how do you remove the creaking sound in the scooters front hinge by adjusting the middle center bolt with a wrench? (No 3D printed part)
i have never adjusted that bolt before and have always used a 3d printed piece or a sheet of plastic cut to fit and glued down. that seems to have gotten rid of the noise for me
Doug Hnut nice, the bolt feels loose in the middle so I have seen people move the bolt with a wrench. You should do a video on wheel alignment!
Did you ever find out what is instant mode switch ?
"If you want to connect a custom battery with a higher voltage."
I do not understand, another battery have a different capacity, but not volts. the unit in the M365 is only for 36V.
May cause destruction if I left active choice when I have a standard battery?
Thanks for the answer.
PLEASE tell me someone here has figured out how to get passed that 'sent retry / cancelled' error. I can't do anything. Everytime I try to downgrade, I get this error, and then have to unlock my scooter using the '000000' code.
Hey so I gave this a try and cruise control doesn't seem to exist at all. Is there something special I need to do to enable it? I tried 1.3.8
Do you have any experience on the ES website and ES_downG app? Its made by the same maker but I don't wanna flash my scooter in a way that wasn't meant for my scooter specifically and meant for a scooter from another brand. So it would be awesome if you could make a video on the ES downg
Cant find the file help me please
In "Xiaomi Mijia M365 Custom Firmware Toolkit" --- Will I get EBS / Motor Braking with the Brake-Lever if i increase the KERS minimum speed value to 28 Km and PATCH- with everything else as DEFAULT 1.3.8 ??? .... Thanks a lot.
What is the differenge between the normal downg app and the patched one ?? (Normal one worked fine for me)
Hi Doug, what are the main downsides or risks using 'Mine'?
Nothing for iphone?
I have the experience that if the KERS scooter is set up with the firmware configurator at 35 km / h the Scooter will start to slow down around 30km / h. Even if the gas is released and the bouncing off the hill at this speed, the engine is braked. Do you have the same experience? In addition, Russian CWF_W brakes are aggressive. This will come to me dangerously. Do not know how to change it?
Hello, why do you they recommend bms 115 over bms 107? I get 19mph at 100% battery life with bms 107 and 18mph with bms 115 so why do they recommend bms 115? Thank you for any info. New to this.
I tried it by changing only the maximum speed. I didn't change anything else. Does this custom firmware also voids the power decreasement of the stock version after reaching 50% or less battery charge?
Do you have to change the 'motor power constant' if you want to reach 30KM/H?
Hi
I've just placed a CFW W flash on my non pro and it's set the BMS at 126..is this safe?
These videos you make are very helpful. Thank you. I have a question. I've already downgraded to 1.4 and use the 107 firmware ( it's supposed to be made by xiaomi? ). I like the power it provides uphill. I want to use the default firmware with the low speed limit and all (mabe it will save up some battery) and add the 107 power setting. Is it possible to find out the number I need to put? Also I don't notice any problems with the 1.4. Do you still recomend the 1.3.8?
Minehas the newest xiaomi version available. Can't put any custom firmware on mine currently...Tries to retry many time and then it times out.
You probably have 082 BLE version and you need to change it to 071. When you do it you can load any custom firmware.
I dont have a Link to load it on my Scooter
download downg from google play
Hi guys, write some experiences here. Thx.
Hello, could you explain about this new added feature?
Remove hard speed limit of 35km/h:
Removes code which checks that the speed is below 34.78km/h (12000/345).
Thank you!
i will do some testing and look into this. thanks
Hi Doug, thanks for the vids. I have tried 200cfw + bms107 and DYoC + bms 115 but it seems I can't get to 30 km/h. Any idea what to change or to adjust?
im not sure. is the acceleration better than original? check your tire pressures. make sure they are at least 45psi. and also make sure you are NOT in eco mode. my personal favorite is 200cfw and bms107 form my older video th-cam.com/video/UqsqTERDwSU/w-d-xo.html
Doug Hnut the acceleration is better and air pressure is high as well. I have changed some settings and flashed again and now I get 30 km/h when running the front wheel at home. Will check it out later outside and with me riding the scooter. But looks promising so far. ;)
Elias Lange hope it works out!
May be you are too fat?)) just kidding...
Question?
Unlocking and riding the ES1, ES2, ES4, Electric Scooters via related apps with android/apple smartphones; Is this thee only way to ride the scooters?
Is there a way to just press the power/dashboard on/off switch after they've been fully charged and unlock from dashboard and go?
Does this make sense to anyone; Or is this a bygone era (simplicity)?
Sorry I can't answer that. Never ridden any of the ES models
i don't Understand The Base Version of ?
What am i Gonna Choose
how can i get battery level.speed,location of scooter to android app,want to write custom app on my own.
whats the best option for setting the top speed that’ll still keep the motor/battery safe? i set mine to 35 is that too much?
This shouldn't have too much of an effect on the motor/battery. This just changes the speed limit, not the motor power. So normally when you reach 25 km/h it will decrease the power consumption in order to keep this speed. So, by increasing the speed limit you shouldn't end up damaging your motor or battery, no matter how high you set it. Of course it will wear out faster, but shouldn't damage. Because the power consumption can still only be a certain amount. That's what the "Motor power constant" controls and changing this would be risky.
Hi Doug, Can you explain, please.
1. How 'Instant mode switch' work exactly
2. If I want rollback to stock version should I run BMS115.bin and that all?
i still have not played with " instant mode switch". my guess is that it will stay in eco mode and limit top speed and acceleration until you go full throttle, then you will be in normal mode
yes if you want to roll back, go with bms115 and 1.4.0
The instant mode switch is exactly what it stands for :). If this setting is enabled, when cruising on normal mode, after double pressing power button u will get ECO mode instantly. Otherwise, there is a delay if the setting is off.
Hi is there any way to turn off kers during braking? It breaks my fuse if I break from to big speed.
Marcin T I don't think that would be safe because kers does most of the braking. But it is possible. Have to disable the wires going to the brake lever.
Thanks :) are there any repository’s where we can try out and rate ones people have created ?, how long do these scooters tend to last I’m at about 1200km at the moment just curious
what u at now?
I just ordered pro2
Is there anything that works for iOS?
no
How did you make this overlay in the video?
I've gone through the motions on everything and when I try and 'flash' the app just says 'retry' many times. I'm obviously missing something and being a doughnut!! M365 production date 22/11/2018, Firmware version 1.5.1 model ending -11829. Can anyone shed some light? Many thanks
marcomg thanks shedding light on this. Is anyone working on it?!
@@drGremi nope you can but first you need connect with mi home app than connet 365_downgrade and you will see ;)
What is this software that displays you speed and distance data?
I'd like to know this too...
just to ask.. did you ever tryed to mount 10inch tires? wich tires are you using? original ones get punctures too much easly, i repaired 10 times maybe in one year... i'm going to mount 10inch tyres, bought from a russian store
Look my front weel LOL th-cam.com/video/tql3iyiFoHs/w-d-xo.html
i have never tried 10 inch tires, i heard you need to raise the rear mudguard and lower the kickstand and do something to the front fender in order to run the 10" tires. im using the original tires, and have repaired the rear 3 times. ive tried solid tire in the rear and they are no good, went back to the original a few weeks later. i have "green slime" gonna try that once it gets here. heard good things from that.
Failed to flash. Sent retry over and over. Bms 115, ble81, drv151. Any advice?
You need to change BLE version to 071. When you do it you can load any custom firmware.
@kallafiorce mine does the same thing do you know how to change it to 071
I just got back from riding and the solid tires with holes in the sides works really well as rear tires. Don't ever have to inflate the tires and no more punctures:
ae-cn.alicdn.com/zFb7FA3VvR9qYBQ2xR3/N8ovwpbUKigm4GzEPrb%40%40hd.mp4
aragorn318 I tires solid tire with NO holes in the rear before, and I found they worn quickly. Didn't like them at all. Let us know how they after a few hundred kilometers.
The key to these solid tires are installing them correctly. I know it's difficult but don't ever boil or heat them.
aragorn318 I microwaved mine. Maybe that why. They are difficult even when hot.
I've had my scooter for 9 months now and I've made this same mistake before too from following after many comments and videos I've seen. But microwaving and then cooling afterwards left my solid tire deformed, bumpy and unrideable. I had to cut if off and I followed the video that I provided above with my new solid tires.
Rear solid tire working better and better. Just replaced the front to solid tire with holes as well. The russians know their e-scooters. Check out the tires:
www.rbth.com/lifestyle/328422-how-rent-electric-scooter
Thanks
Will there be a problem if i open the mi home app after i changed/flashed the firmware?Can i still see battery level and other thigns or should i start to use a new program?
It will ask you to update. Just cancel it. Otherwise no problem
thanks doug
Do you need dual bms fuses to do this? Also do new scooters have a dual fuse bms?
from what i have heard, all of the new one have 2 fuses
if you set motor start speed to 0 it will start at 0.1
I run this firmware with 1.4.0 version. You have to suggest other firmware or version.? Thanks
Which settings are you using right now? I currently ride my M365 with 200CFW and BMS107 which you recommended in your previous video
aragorn318 currently my favorite setup is exactly what you are using. 200cfw and bms107. When summer gets hotter , I might need to change , so the motor won't overheat
@@DougHnut Thx for all the great info. I'm running cfw200_w bms107 and very happy with it. Just curious are you still running the same setup or have you changed? Asking since I'm little interested in testing this software.
Can you post a download for the firmware you use?
Do you know where I can get a replacement rubber kickstand end?
my m365 never came with one, did a qucik search and could not find any. i only see 3d printed versions
Doug Hnut thanks. Where can you see the 3D printed ones? I can’t even find those!
www.dochello.ru/ or if you know someone with a 3d printer www.thingiverse.com/thing:2474596
snackman excellent, thank you very much!!
Just a little FYI update. Curious Joe now is selling them. I just ordered one from his store.
www.curiousjoe.se/webshop
I have a question did you try editing the maximum speed to 30kph but the motor is in the same original = 51575?
i haven't. my guess is that it probably wont make it past 27kph on flat ground. and acceleration will be just as slow as stock
I have another question In DyoC =40165 do i get 30kph is it possible now? And the motor will overheat in that motor power settings?
The site got a update wich explain the motor power, it says not use below 32000 ... I was thinking in 35000 , is there any rule for this number? ( All 4 looks like a magic number =p)
35000 is fine, any number is fine. i used 25787 because i want the most power and dont care for battery life(my commute is only 3 km each way)
i reach 550KM but my battery damaged after i buy full wheel.. but i know how fix it :) . when i send it to repair.. its back same.damaged..then dont know how to fix..
What is the name of the app for all the detailed Information in the Video?
quik by gopro
Doug Hnut Thanks for the Info @nd for your nice work!
I tried this, í checked everything and now my scooter is locked. I flashed it with older files and still wont unlock. Do hoy know how to fix this?
There's a hidden unlock code that requires you to use the MiHome app. In the app, change your password to anything, then close the app so the scooter disconnects. Then go back in the app, connect the scooter, and change your password to "000000" - six zeros.
That will unlock it. If it doesn't work the first time, it's being glitchy - try again. keep 'changing' the password to 000000.
I’m trying to downgrade from the 142 what to do can you help please
I have a video in my playlist showing how to downgrade
th-cam.com/video/x9ESCRXTRiM/w-d-xo.html
Open bin : invalid bin....
Generate firmware after you get zip file don't extract, use the m365 downg app, load the zip file
Why isn’t this on IOS?
Dough, the customize firmware is it applicable to M365 production 2015-2016? My serial number below 10000. Thanks bro
Indra Rochadi check out my other video to help determine if your scooter is applicable or not th-cam.com/video/UqsqTERDwSU/w-d-xo.html
What’s the monitor app you’re using?
Gopro hero 5. It has GPS data and their gopro quik app can add the data overlay
Doug Hnut ah very good I have a Hero 7, never knew it could do that.
What firmware base are you using for CFW_W? Thx
i prefer 1.3.0
What does 'Instant mode switch' mean?
From Arkadiusz:
Instant mode switch:
very simple function causing switching
modes Normal/Eco immediately after double press of power button,
during a ride. So difference is that you don't have to press throttle
or brake to confirm change of mode. That's all.
I recommend to keep it OFF because this function could provoke dangerous
situations because of rapid speed change when your hand is away from the handlerbar.
for version 1.5.1 :(
Thank you
It dont work on 1.6.6
Press button check ver and it cant check
Wtf you said use bms107 in the last video now you say bms 115 which is it?
This is a 16349. Later model than those in the last video.
Thanks for all your videos on M365. i've reached the 1000km yesterday and i used your guide to try different firmware. first i tryed was CFW_W. Now i'm experiencing this problem with charge. i dont know if i broke something internally or is something caused by the firmware. I will appreciate if you will suggest me what to do. thank you: here the problem: /watch?v=cJotL68Gees
just leave it plugged in, it will start charging once the battery cools down.
mine does the same thing. i think if the battery is over 40 celcius, it wont charge.
no, trust me battery is totally cold. i drived yesterday last time
possible battery charge connector issue, you might need to take the cover off to check the connector
th-cam.com/video/d5nU6hd1HXI/w-d-xo.html skinny red black wires on the top
maybe is a coincidence
. maybe some false contact in wires.. my city is full of Lava Stones, so many stress on wheels and body.. and i'm also using shitty solid tyre... untill 10inch tires arrive ;)
Hey doug , thanks for the video. Can I go back to default settings ?
Yes you can. Just flash to stock files. Or use the mi home app to update to stock firmware. But it's a bit harder to go back to an older firmware after you update to 1.4.2
i cant find download for dyoc can send me link please?
m365.botox.bz
Does it work also for ninebot es2?
sorry it will not
Is it possible to do something like that on an Ninebot es2?
thanks :D
Does this work if you have an iPhone?
Sorry no. You need an android phone
Ok thanks
Hello Doug, can you help me with a setting?
* I want my ECO mode, to have the same acceleration as the "sports mode" (very fast), but still keep the same ECO top speed. What do I need to change?
Thanks mate. Great channel
Can I make the scooter run 40 klm?
not without adding more or bigger batteries
What is the maximum speed without adding batteries?
i hit 32 kph on flat ground with freshly charged batteries, but 30 kph is more of a consistent top speed i can achieve
Actually what I want is to make mine going faster. A lot faster
you will need a bigger and higher voltage battery and aftermarket controller to go faster. www.dochello.ru/ they can do it.
but if you want to go like 50 kph or more then i would suggest getting a different scooter like the luna cycle apocalypse
If I change the speed will
My scooter break
not really lol
cool nice. ))))
I'm sorry, but you'll explain how I can get back to my original firmware and settings. Well thank you
Log in Mi Home app and upgrade firmware to latest...
Sorry,my firmware is 1.3.3
Just run the Mi Home App and it should auto detect that there is a newer Firmware version compared to your 1.3.3 then just do the upgrade from there and that will put you back to the original settings.