WPL C64-1 vs MN Model MN-82. Cheap Truck Battle!
ฝัง
- เผยแพร่เมื่อ 1 ธ.ค. 2024
- Here we have the New WPL C64-1 RTR going on a trail run with the MN Model MN82 which is also a recent model from mn model. Fun little trucks that are surprisingly more capable than they look. Check them out!
MN Model MN82 Toyota Land Cruiser:
www.banggood.c...
WPL C64-1 Toyota Hilux:
www.wpl-rc.com...
#RunThatRc #WPL #MNMODEL
Add some weight to the MN82, flip the rear axle to sit under the leaf springs and remove the adjustment ring, then get some sticky tires and you're good to go. Super fun and inexpensive.
When you flip the rear axle, doesn't the rear end sit up way higher than the front?
Definitely will purchase the MN RC For sure.
Hope you enjoy it!
Both good options if you just want a little budget 1/18 truck 👍 Also, very cool how Rlaarlo put your video and channel as a demo for the new speed run competition.
What! They using my old video or you seen it from the old speed run?
@@RunThatRC Check their main page and the race info. They are throwing you some traffic by referencing your channel and video in the rules because it was so well done! Big congrats man!
Just need to swap the 260 for a 370, bolts right up, and fixes the torque issues instantly FOR $5usd
which motor works plug and play?
@@MrLukki did you find out?
@@trels203 no
💯 Great job, I like these trucks! Very good value for money and a lot of fun to drive.👍👍👍
Fun scale trailing these rigs. Definitely a good time!
I agree with you... That wpl c64-1 just need a upgrade... Its appearance is already awesome... Nice video bro keep up the good work... I already buy the wpl c64-1 today and do a test run so far its not that bad...
they both are ok for some trail duties. Mods needed for more performance for both but the MN Model is surprisingly good stock electronics.
@@RunThatRC Yup true 👍🏻
People talk crap about MN, but they seem decent fir the money. The only thing with the 82 is that the tires are crap. I might try the upgrade tires on mine and see if it helps
they definitely are more fun and capable than people expect. Just being a less known brand and cheaper makes some have the perception of it being crap. Also some people just like to buy plug and play parts and don't like to fabricate or tinker much. To me these rigs have there place and also they occupy a scale size most other companies don't make.
Great video, the Mn82 looks like a real truck cruising in Afghanistan 😊🤠😭🇬🇧
I wish that the WPL would have not been cutting off. They made such a great little rig
MN Model ESC maybe? I was told the production models dont have the cut out issues.
@@RunThatRC Mine cut out constantly under any kind of load. I put a 280 motor in and it hasn't cut out since 👍🏼
@@lukedavis4213 what upgrade do you do for your wpl c64-1? Can you share to me? 😅
Just bought the Mn, same color and everything 😂 waiting for it 🎉
Hope you enjoy it as much as I do!
Nice! Is the transmission of the C24/C54 more robust or at least equal to the MN82/99?
C24 not as good as mn82 but same as mn99. The C54 has a good gearbox equal or maybe better than the mn82 but stock electronics are the best in the mn82.
@@RunThatRC Thank you very much!!! 😉👍🏻
Are they both 1/12 scale?...well the cutting off is like a real engine...you cant just force climb everything, ya gotta reverse and find away around...
I'm starting my RC adventure with this Toyota :D I'm thinking about switching wheels and tires (no idea what to pick) and maybe battery (got small one 500 mah)/motor. I've seen upgrade metal suspension kits - but I think that it will increase the weight drastically.
awesome little trucks for sure. I have a lot of fun with them.
You've said in the video that you modded the board to get rid / reduce the cutouts..could you explain more?
If I remember correctly the chip you want to jump is marked R11 on the board. you just need to solder a jumper wire across it and you've got a higher cutout.
@@RunThatRC does this apply to all batches or did wpl made updates to the latest batch? I just got mine few weeks ago
@KidNomura according to WPL it shouldn't be an issue for the production units. This is a pre production test unit they sent me.
Awesome video brother 👍😎
Thanks for the visit
Does this early batch of C64 has cut off problem? TomleyRC had this problem too.
yes it did have cut off problems but WPL says that they fixed the issue for the production models.
Did you change the tire on the MN82?
this run its on the stock tires.
Does your WPL axles or driveshafts bind up on full turn? Mine does terribly. I also get the esc cutting out on mine too. Keep up the awesome content!!
not really experiencing the binding much. You have a production model that cuts out? WPL told me they fixed that issue. I would contact WPL on there messenger and see what they may be able to do for you.
@@RunThatRC I plan on putting a hobbywing 1060 esc in it anyway
Take the steering cups out and you'll see the dog bones sit in a channel. Trim and taper the end of the channel and it'll massively help with binding. Almost make it look like an SCX/Tamiya/Etc version
@lukedavis4213 thanks. I'm gonna ditch the stock axles , motor and esc and do a complete overhaul. Beautiful truck!
This or the Lc80 fcx18? Which one?
imo the FCX18 LC80 is quality and these are more scael trail rigs and also the size difference between them is significant. I like all of them for different reasons. performance out the box FCX18, scale and size go to the wpl and mn model.
Which would you say is more upgradable?
they both have similar upgragability. Just depends how much tinkering you want to do. Some parts are interchangeable on both with minor mods.
SO WHICH ONE IS BETTER
out the box I have to say I prefer the MN Model out of those two.
MN
Man this is Cool. Great Video Comparing these 2.... I think the 82 is cheap on Ali. I might get one. I am torn. LOL
Yes you can definitely find these for a good deal with a quick search. I like it more than I wanted to.
How can I get it I want to buy one like it
I have the links in the description box. You can check then out there.
I ordered a mn82 with a 280 motor. Is it good i mean like better than that mn82. and i subbed 🎉
its a good one 👍
MN82 doesn't have stock drag break so this on is modified
I ordered both
they are fun rigs to mod.
Hello, could you say where you got the Toyota?
MN Model MN82 Toyota Land Cruiser:
www.banggood.com/custlink/K3K8GNosrv
WPL C64-1 Toyota Hilux:
www.wpl-rc.com/products/c64-1?ref=RunThatRc
Mine cuts out only when its to strained but works good im actually gonna put c24 transmission i like the 180 with 887 turn motor its a beast
Don't do that just get the 370 motor it bolts right up to the 260 transmission. Now blows my c24 out of the water has twice the torque
@@16driver16 hell yeah thank you for the heads up !!
@@fpvMazerolle2607 only about $5 usd from wpl too
@fpvMazerolle2607 if you did swap to the c24 one of your axles would need flipped to reverse its rotation to match that transmission if you do go that way at any point as the c24 is not counter rotating
@@16driver16 yep I figured that out the hatf way smh
Nice video..i just subbed
Thanks and welcome!
Big like on this truck excellent video adventure 🙏👏 🙏👏
I appreciate it!
Dude I threw 370 in my c64-1 and esc fried 😢 I have two more on the way
Stock esc definitely not handling the job. Heard others with this issue. I would get a better esc and receiver and call it a day! I usually go 370 motor, flysky tx/rx and hobbywing 1080 esc.
Really wish I seen this I was so on the fence about these two I went with c64
C64 is a looker though. They are all good with some mods.
They're so cheap get them both 😈
Mn stock beats c64 modified!
the wpl c64 is custom and the mn 82 is original
How so? The wiring he did was unnecessary just throw the 260 motor away and add a 370 to both for $5 each and actually have a good truck
The wheels in the mn82 are small and bad at grip
they aren't the best but they aren't useless. Tire upgrade would make this truck even better thats for sure.
@@RunThatRC I bought a mn82 and I'm just waiting for it to arrive I will surely upgrade it's Wheels first❤️
Uhmm hi ca can you send me c24-1 parts its ok if its broken if now its ok thanks 🙏🏻👍🏻😊
first
mini crawlers are the thing not this
why not scale trail trucks as well? These are cheap and fun.
Are you sure. You have 0 Uploads. Do you even Own a RC... LOL just a Troll ?