I am looking in to that for my MN99s. On the 82 it would be a bit more difficult as I would need to build something that supports the frame after removing the bed. It’s can be done, and will add that to the list. My list keeps growing so I don’t know when, but stay tuned.
They really are not worth it. They don't flex. They only provide up and down motion or both wheels. Stay tuned, I am getting ready to build a set that will work.
I was unable to get it to twist with the 3D printed arms. I am working on replacing the arms with threaded rods and ends. but I need to design some mounts first. Stay tuned.
I just ordered mine the New MN82s Supertourer you should check its new release*, I think if im gonna upgrade. Im good upgrading its drive shaft and the joint/links and wheelset and yea shock also**, Anyway thanks for the video ☝️
I just looked at those online. They look very cool! I am interested to know how the extra weight changes the handling. I find the MN-82 has a very good balance and not too top heavy like the MN-128 is.
I don't know where you can purchase the arms. But, I would suggest not using these. They work well for up and down but they do not allow the axel to flex, one side up the other side down. I have a plan for that but I am still planning that video. Stay Tuned
@@rahulvyas7955 I don’t have a link to purchase the arms. They really are not worth it. They don’t have the flex they should. But the look cool. I have an idea for this that should work. If it works I will offer the 3d parts for sale. I don’t want to offer something that is not great. The shocks on the other had are great. And they work with the leaf springs.
INJORA 53mm Rear Shocks: amzn.to/3MaUTuw
INJORA 59MM Shocks: amzn.to/4fNvC78
Thank you so much for making this video I needed to see someone do this
Glad I could help. I am looking at making a new version that will work even better. The shock install is still great.
The metal chassis upgrade looks beautiful for the 82
I saw that, it does look very nice.
Hi Mr. What about steering behind like a Rock Crawler??
I am looking in to that for my MN99s. On the 82 it would be a bit more difficult as I would need to build something that supports the frame after removing the bed. It’s can be done, and will add that to the list. My list keeps growing so I don’t know when, but stay tuned.
Try using metal 4 link with balljoints ...or putting some ball joints at the ends of your trailing arms 🤔
@@killerbee10ify they are in order.
And how do you fit the metal links?
@@dimasmatos94 I will make a video on how to do that once, I figure that out.
Drop a link to the trailing armss. I dont have a printer so ill buy some off of you lol.
They really are not worth it. They don't flex. They only provide up and down motion or both wheels. Stay tuned, I am getting ready to build a set that will work.
Nice, about to do this.
What did you end up doing to allow the rear axke to twist with those trailing arms?
I was unable to get it to twist with the 3D printed arms. I am working on replacing the arms with threaded rods and ends. but I need to design some mounts first. Stay tuned.
I just ordered mine the New MN82s Supertourer you should check its new release*, I think if im gonna upgrade. Im good upgrading its drive shaft and the joint/links and wheelset and yea shock also**, Anyway thanks for the video ☝️
I just looked at those online. They look very cool! I am interested to know how the extra weight changes the handling. I find the MN-82 has a very good balance and not too top heavy like the MN-128 is.
Great video, does it still handle a load in the back with this setup?
@@bombitoborn2RC it looses all flex left to right. But it is smooth up and down. I am going with a new plan soon. Stay tuned. The shocks are great BTW
What did you modified to fit the tyres? Thx
I still have clearance issues with the front end, i do need to figure something out for that. The rear end seems to be fine.
Where to buy this arms ? Can you please share link.
I don't know where you can purchase the arms. But, I would suggest not using these. They work well for up and down but they do not allow the axel to flex, one side up the other side down. I have a plan for that but I am still planning that video. Stay Tuned
👍
Thumbs up back at ya!
Where can i get that shocks?
Here are the shocks I used
INJORA 53mm Rear Shocks: amzn.to/3MaUTuw
INJORA 59MM Shocks: amzn.to/4fNvC78
Hey do you have the STL for the trailing arms? Thx
Here is the link: www.thingiverse.com/thing:6583971
@@BillsWorkbench thx 🫶 how big do you scale it up? It’s very small if you open it on cura..
@@ZM60 10
No option to buy in above link@@BillsWorkbench
@@rahulvyas7955 I don’t have a link to purchase the arms. They really are not worth it. They don’t have the flex they should. But the look cool. I have an idea for this that should work. If it works I will offer the 3d parts for sale. I don’t want to offer something that is not great. The shocks on the other had are great. And they work with the leaf springs.
Where did u buy That Arm??
Here is the link: www.thingiverse.com/thing:6583971
What is name this item cant your sent wiht me link shopie
Here is the link to the arms. Here is the link: www.thingiverse.com/thing:6583971.
Sorry man but this little upgrade you did took s00oo LONG.
Thank you for the feedback.