Ok, now THIS is what I want for my counter tops!! I need to quit watching your videos so I can actually make up my mind! As you would say, I can stop here, but, I’m not! 😂 That gold is to die for!!! But, I’d have to change all my cabinet hardware & light fixtures! I think it would be well worth it but, kinda defeats the purpose of me doing epoxy instead of granite to save a lot of money! Oh well, go big or go home, right!!! This is my absolute (new) favorite!!!! Thank y’all so much for making this awesome video! Next stop #artist till death!!!!
Ladies, I continue to go back to this one over and over again. If I can ever find all of that products, I’d like to do a small table myself but I keep really thinking about this about a master bathroom. Countertop and backsplash and tub and shower enclosures. Might I have a bit of your opinion about this as the countertops, backsplash and tub and shower enclosures?
This is stunning.. I m about to try renewing my kitchen old and yellowing Corian tabletop. Should I do some fine sanding work before applying resin for a better adhersion?
Absolutely. I would clean very well then sand with 80-120 grit. Clean again then apply 2 coats of a very high quality bonding primer. I use XIM (available on my website). Let dry overnight then paint with your base color. Have fun!! 😊😊
Beautiful table ladies!!! Can you give us an idea of. The approximate size of the table and the amount of resin you used? Hope to see you make more of them in the future
Thank you so much. The table was about 3 1/2 ft. X 2 ft. When doing any sort of Dirty /Exotic pour I use around 5 oz per sq ft. so I have plenty of material to meld and move around. I usually round up to the next highest mark on my bucket for easy math 😂😂.
I love the lighter area that’s next to you as you were working, I didn’t like the gold Erica added, it’s pretty but it took the organic away but it’s not mine!!
I just bought some inexpensive legs off Amazon and they look PERFECT! ❤️ Interesthing Home Heavy Duty Metal Coffee Table Legs with Screws and Hairpin Leg Protector, 20 Inches, Gold, 4 Piece Set www.amazon.com/dp/B07MFMRR4Z/ref=cm_sw_r_cp_api_glc_fabc_gCl3FbTQHSM6X
I found stone coat countertops and the you, been following both of you guys for about a month now, you guys are doing great work! It sucks that stone coat isn’t sold in Canada? They don’t ship here :( I’m having trouble with what colors can be added with certain brands of epoxy. Some colouring agents can’t be used, depending on why brands you use, I wish I could just buy stone coat! Lol great work guys
⭐️⭐️⭐️⭐️⭐️ Love this! I believe after searching and searching, watching countless videos on epoxy countertops, between you & #SCC, @StoneCoatCountertops and a couple of others, that this is what I’ve been looking for. Oh my gosh!! This has got to be in the worlds Best TOP 10 and most realistic looking stone made with epoxy, ever! It’s beautiful! Thanks, Rhonda for sharing your expertise in faux art using, Stone Coat Countertop Epoxy. I enjoy your videos so much; great content for a beginner! I give a thumbs up 👍 on each and every video I watch. Can’t wait to do our 50sf of counters with this dirty/exotic pore. 😃 Prob be around mid September. Hope to speak to you as we get closer to our install date for any tips on this project. For now, we’re getting ready to practice on some sample boards. Can you tell I’m excited? I can’t wait!!
@@RK3Designs oh goodness, no! I thought I saw a 101 class, maybe not. I’ve watched every TH-cam tutorial on here. Well, I just found you. Now I’m binging (sp.)on yours! I think I’ve learned and then I’m too afraid to start! I will because I’ve bought some starter molds.
@@RK3Designs I didn’t tell you I was watching the video where my first comment was. It looked very pro! I liked the was you were so easy and not intimidating! Thank you so much for your reply!
Hey there. Email me at rk3designs@gmail.com and I can send you all the information on our classes. Our Pro class is designed for all levels. We have seasoned epoxy pourers to those that have never touched epoxy. We would LOVE to have you!! ❤️❤️
It depends on what project I’m doing. When doing countertops, we use either the Regular or Art Coat epoxy. If I’m doing river tables, molds, etc. I’ll use the casting resins.
I ordered the product and when I asked about some of the colors that u are using and they told me that they don't do colors? Where do I get them for my next job .
Hey love, love your work, love the videos but would you mind not playing the music? I am slightly deaf and I find the music clashes with you talking making it quite difficult for me, 😊
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
So beautiful!!! And thanks so much for sharing with us, mere mortals, this incredible art.
I just saw this table in person and it is just as beautiful and white as it was in this video 😊
So cool seeing these 2 ladies working together. E Austin is so for you.
Thank you!!!! 😊
Those gold lines really gives the WOW factor 😍
Great seeing Rhonda & Erika working together so beautiful luv this coffee table so gorgeous luv it 💜💕
Thank you so much!! I was honored she joined me in this project!
That gold at the end was really really cool.
It really made the table pop!! Thanks for watching!! 😊
Love this. I want to do my countertops like this. Replacing the gold with silver. Thank you for sharing.
You bet. Thanks for watching!
I totally agree with the silver!
I love the run dmc tshirt!
Me too!
This table is incredibly pretty
My 2 favorite artist.
Awe. So sweet! Thanks for watching.
Ok, now THIS is what I want for my counter tops!! I need to quit watching your videos so I can actually make up my mind! As you would say, I can stop here, but, I’m not! 😂 That gold is to die for!!! But, I’d have to change all my cabinet hardware & light fixtures! I think it would be well worth it but, kinda defeats the purpose of me doing epoxy instead of granite to save a lot of money! Oh well, go big or go home, right!!! This is my absolute (new) favorite!!!! Thank y’all so much for making this awesome video! Next stop #artist till death!!!!
Lol. Thank you!!! This is one of. my favorites too 😊😊
Great teamwork ladies! Awesome “Stone” table! Love how this one turned out!
Thank you so much!!!
Slammin' job ladies. It's gorgeous!
Thank you so much!! 😊
Ladies, I continue to go back to this one over and over again. If I can ever find all of that products, I’d like to do a small table myself but I keep really thinking about this about a master bathroom. Countertop and backsplash and tub and shower enclosures. Might I have a bit of your opinion about this as the countertops, backsplash and tub and shower enclosures?
I’ve used this recipe in all sorts project 😊😊
Beautiful effects with your combo technique. Thanks for sharing.
Thanks for watching ❤️❤️
GORGEOUS!!
Love this, the color mix is perfect
Absolutely gorgeous
Thank you!!!
Absolutely stunning!!!
Stunning!
Thank you!! 😊
Just... fabulous
Thank you!! It was fun!!
Gorgeous!! Great job ladies!! 🤗😍🥰
Thank you!! It was so much fun!
@@RK3Designs It always seems to be more fun when talented artists put their heads together on a project!! ❤🤗
Y'all did a great job!!! 💖🥰💖
Thank you!! It was lots of fun!
This gives me ideas. This is lovely
Yeah!! Thanks for watching!
Gorgeous! This is what I want to do to my entry table. Yummy!
It’s one of my favorite pieces! 😊
Beautiful!
Thank you! 😊
Love it 👏
Use the masking tape for rough surfaces and really press into the substrate. Should hold pretty good
Well done
Omg I love this !!!
That is gorgeous 😍
Thank you!!! 😊
This is stunning.. I m about to try renewing my kitchen old and yellowing Corian tabletop.
Should I do some fine sanding work before applying resin for a better adhersion?
Absolutely. I would clean very well then sand with 80-120 grit. Clean again then apply 2 coats of a very high quality bonding primer. I use XIM (available on my website). Let dry overnight then paint with your base color. Have fun!! 😊😊
This is beautiful. Love it. Great job
Looks amazing. What do you often do to address the bottom side of the table? Do you ever epoxy both sides?
W will let the piece dry, flip over and sand off the drips, I will paint the substrate, but I rarely will pour epoxy on the bottom side.
beautiful! Have you ever done a project where you added gold flakes?
I use the gold mica flakes quiet a bit. 😊
I really like it! Awesome job!
I'm glad you like it!! Thanks for watching!
Beautiful table ladies!!! Can you give us an idea of. The approximate size of the table and the amount of resin you used?
Hope to see you make more of them in the future
Thank you so much. The table was about 3 1/2 ft. X 2 ft. When doing any sort of Dirty /Exotic pour I use around 5 oz per sq ft. so I have plenty of material to meld and move around. I usually round up to the next highest mark on my bucket for easy math 😂😂.
@@RK3Designs thank you 😃
❤️🌈❤️ Love this. I would be afraid to add the fracture lines yet they turned out so great.
Thank you!! That’s my favorite part 😂😂
I love the lighter area that’s next to you as you were working, I didn’t like the gold Erica added, it’s pretty but it took the organic away but it’s not mine!!
My daughter wanted the gold to match a lot of the fixtures in her salon. Thanks for the feed back I really really appreciate it!! 😊😊
sorry...I typed too soon....that was totally beautiful!
❤️❤️❤️❤️❤️
Gorgeous! Love it! Which legs will you use on this?
I just bought some inexpensive legs off Amazon and they look PERFECT! ❤️
Interesthing Home Heavy Duty Metal Coffee Table Legs with Screws and Hairpin Leg Protector, 20 Inches, Gold, 4 Piece Set www.amazon.com/dp/B07MFMRR4Z/ref=cm_sw_r_cp_api_glc_fabc_gCl3FbTQHSM6X
Can we see this cured? I love this!
That's why your hair is the bomb!!!
Vow. Too good
Where is Milky Way from? Can’t find it on both links it’s sooo beautiful
artisttilldeath.com/shop/ols/search?keywords=Milky%20Way%20&sortOption=descend_by_match
Where can I get those mixing buckets? 💖 Love it girls!
I get them off Amazon. The brand is TSP. 😊
I would really love to lightening on the counter, any ideas on how I could get that effect?
I’m not sure I understand the question.
super bravooooo!!
Thank you!!! 😊😊😊
I found stone coat countertops and the you, been following both of you guys for about a month now, you guys are doing great work! It sucks that stone coat isn’t sold in Canada? They don’t ship here :( I’m having trouble with what colors can be added with certain brands of epoxy. Some colouring agents can’t be used, depending on why brands you use, I wish I could just buy stone coat! Lol great work guys
There is a SCC distributor in Canada and I know they are working on getting more.
⭐️⭐️⭐️⭐️⭐️ Love this!
I believe after searching and searching, watching countless videos on epoxy countertops, between you & #SCC, @StoneCoatCountertops and a couple of others, that this is what I’ve been looking for. Oh my gosh!! This has got to be in the worlds Best TOP 10 and most realistic looking stone made with epoxy, ever! It’s beautiful! Thanks, Rhonda for sharing your expertise in faux art using, Stone Coat Countertop Epoxy. I enjoy your videos so much; great content for a beginner! I give a thumbs up 👍 on each and every video I watch. Can’t wait to do our 50sf of counters with this dirty/exotic pore. 😃 Prob be around mid September. Hope to speak to you as we get closer to our install date for any tips on this project. For now, we’re getting ready to practice on some sample boards. Can you tell I’m excited? I can’t wait!!
Awww. You are toooo sweet!!! Thank you for taking the time to leave me this comment!! Made my day!!! ❤️❤️❤️
Thank you! Been waiting for this video❤
I need your class, even though I’ve already taken other classes. Please tell me that this isn’t for beginners!
Hey there Yvonne. Are you talking about our Pro Class?
@@RK3Designs oh goodness, no! I thought I saw a 101 class, maybe not. I’ve watched every TH-cam tutorial on here. Well, I just found you. Now I’m binging (sp.)on yours! I think I’ve learned and then I’m too afraid to start! I will because I’ve bought some starter molds.
@@RK3Designs
I didn’t tell you I was watching the video where my first comment was. It looked very pro! I liked the was you were so easy and not intimidating!
Thank you so much for your reply!
Hey there. Email me at rk3designs@gmail.com and I can send you all the information on our classes. Our Pro class is designed for all levels. We have seasoned epoxy pourers to those that have never touched epoxy. We would LOVE to have you!! ❤️❤️
Put camera above bucket when spraying so we can see colors as added
Great idea!! Will need to protect my lense from overspray though 🤪🤪
Like the background music filing in dead space
Thanks 😊😊
Brasil aqui seus trabalhos e topzera show.
Hey with the final product was there a clear coat put over the finish or did you give as is?
Yes, I did put a clear flood coat 😊
Stone coat has several different resins. Which ones do yo prefer?
It depends on what project I’m doing. When doing countertops, we use either the Regular or Art Coat epoxy. If I’m doing river tables, molds, etc. I’ll use the casting resins.
Great video! Can I use 99% alcohol and dilute to to 91%? Thanks!
I’m not exactly sure how you would do that. 🤷🏼♀️
I ordered the product and when I asked about some of the colors that u are using and they told me that they don't do colors? Where do I get them for my next job .
How did you make the top design before you started the pour?
It was made out of scrap MDF. We will be coming out with the fabrication video soon. 😊
Awesome, I can't wait
Hey love, love your work, love the videos but would you mind not playing the music? I am slightly deaf and I find the music clashes with you talking making it quite difficult for me, 😊
How much resin per sq ft did you mix for this
We use 6 oz / sq ft for a dirty pour technique. 😊.
where do you get your table legs
What do you think about using Resin for a kitchen floor? Is it durable enough?
You bet, but it's an epoxy made specifically for flooring, not the countertop epoxy I use.
❤️
Clever girls
رائع جدا شئ مميز
Bee U T ful!
It looked nice before you put the lines in.