Thank you! I've been using Stone Coat epoxy exclusively for over 4 years. I really like the open time, UV resistance and durability (including their Ultimate Top Coat products).
Thank you! I don't use a timer and my shop is climate controlled. It's stays a consistent 72° and 25%-30% humidity. Due to that I know I have about a 2 hour max window of working time. And yes, I will post final pics of the countertops, hoping to pour tomorrow morning. Thanks for your questions and comments, and supporting my channel!!!
I LOVE your designs! I would love to see a video with all your products and what they are for. I know what they are for but... you guys sell different types and I don't know if you guys have a video specifically explaining what they differ 🤔 mixing when you're new is a bit intimating too. I had to do a vanity 5 times! 😅 didn't come down even on the sides... sort of thinned out... Just a video explaining like I'm 5 years old can go a long way for beginners. Most of your videos show the epoxy already mixed. If you guys can explain each one that you are using how much, and which epoxy and why that one particularly. Thank you!! I appreciate you all.
Thank you so much, and that's a great idea to put together a beginner tutorial, per se. I will work on that. I've been building and designing countertops for customers full time and you can see most of my work on my website at www.kcdcdesigns.com Thanks again!
Thank you! (and sorry for the late reply). There are so many options, please keep me posted on your project, and feel free to reach out if I can be of help. Have fun and thank you so much for supporting my channel! Keith@kcdcdesigs.com (keep me posted!)
@@candyj4321 I use 1/2" MDF for most of my sample boards, if that's what you're referring to? To make actual countertops I use 3/4" MDF. I also have several fabrication tutorials on my channel if that will help.
Thank you! The torch is a Bernzomatic TS4000. It's important to be sure the torch has the holes at the bottom of the nozzle so it doesn't go out when it's inverted.
All epoxy resin will "amber" over time, just the same as the siding on our homes will discolor, and in many cases don't match from the north side of our house to the south side. That being said, epoxy should never "yellow". If it yellows, the yellowing is typically caused by a chemical reaction of some sort. Either the undercoat paint hasn't completely off-gassed, using colorants that are not UV resistant, overheating the epoxy and/or colorants, etc. I've been doing this full-time for over 4 years, including many white/light colored countertops and none have "yellowed". So, IMO what must be done is to always follow best practices in order to achieve and expect the best results. I hope that makes sense, and thank you for the great question!
Hey bro, love it! Your epoxy work is awesome! I just finished my first countertop today! Turned out awesome! I could use some advice though! So..with the flood coat, I deshedded the roller, I mixed my epoxy perfect ratio..and then proceeded to pour over the tacky surface! It smoothed over...but there were still a few little imperfections in the surface! Do you have any tips for resolving this? Thanks
Hey there and thank you! And congrats on your first countertop, that's awesome!!!! Send me some pics at Keith@KCDCDesigns.com, I'd love to see it and we can also discuss your question more, and chat on the phone if you'd like. Regarding your flood coat, it may depend on what type of imperfections you're seeing. If they're dimples, that could be from micro bubbles that didn't get popped, and popped late when the epoxy was too set up to self-level. If it's wavy, that could be from torching too late. It could also be from not using enough product for your flood coat. When you figured square footage, did you include the 1.5" drop edge in your measurements? Doesn't seem like much, but on a large countertop it can make a difference when determining the 3oz/sf for the flood coat. Lastly, it sounds as if you used a roller to apply your flood coat? I've only used a 1/8" x 1/8" square notched trowel to assure even and consistent coverage, so maybe the roller left, or created some thin areas on the surface? Not sure on that one. Send me an email and let's chat some more. Again, congrats on your first countertop and thank you for your kind words (and supporting my channel!). Keith, email me at Keith@kcdcdesigns.com
@kcdcdesigns hey Keith, thanks for the information. I'll get some pictures over to you soon! I'll also send some contact details. Meeting up to discuss the epoxy will be great!
And he can sing as well. Just found your channel. I have been watching many videos to learn different ways of various applications. This turned out really nice. Thanks for the video.
Thank you so much, and I'm glad you found my channel and hope you find it helpful! Browse around as I mainly have tutorials showing how I create different designs, and please subscribe if you would! Thank you!!
Hi I just planing on do it to my kitchen can I ask why some people used tap around the edges and you don't, well that's your first video I hatch, hop you answer me
Hey there and great question. I rarely tape my edges because I rarely use more than 3 oz/sf of epoxy. If I were to tape my edges, when I pull the tape there's not enough material on the surface to flow over the edges. If I'm using 5 oz or more per square foot of epoxy (like a dirty pour for example), a tape dam is used to keep the excess epoxy on the surface from just running over the edges. Then when I pull the tape at the right time (1.5 - 2 hours later, depending on temps), there's enough epoxy on the surface to slowly flow over the edges. Did that make sense?
All epoxy resin products will "amber" over time, but should never "yellow". I've been installing epoxy countertops for 5 years, many of them a white marble look, none of which have "yellowed". Yes, they may have ambered a bit, but only noticeable if placed beside a newly poured white piece. Darker colors, even if they have some white in them, will never be noticeable, IMO as long as all best practices are applied when pouring.
I really like that design. I want to see the full counter now, not just the sample board. Keep up the good work.
Thanks, I'm hoping to pour it tomorrow and install this weekend. I'll for sure post pics on my FB Biz page and website.
Turned out great -- and we got a little Keith concert out of it! Loved the singing! 👍😁
Thanks, and I should probably be more careful with my singing, LOL.
I appreciate the comment, thanks again!
I love the design AND the great singing! Keith, keep on happily healing!
Thank you so much, Carol! And I should be more careful about my singing, lol
You are Fantabulous !!!
Thank you, Kathy! 🥰
Really good design 👌. what kind epoxy are you using if you don't mind
Thank you! I've been using Stone Coat epoxy exclusively for over 4 years. I really like the open time, UV resistance and durability (including their Ultimate Top Coat products).
It almost looks like the veins are onxy in marble. If your client doesn't mind, would love to see after the final install is done. ❤❤❤
Thank you, and I certainly will take and share pics of the finished product.
I'll have some studio pics, and also once they're installed.
Gorgeous. Do you use a timer to keep track of epoxy time. What temperature and humidity is your shop?
Will we get pictures of finalized counters?
Thank you!
I don't use a timer and my shop is climate controlled. It's stays a consistent 72° and 25%-30% humidity. Due to that I know I have about a 2 hour max window of working time.
And yes, I will post final pics of the countertops, hoping to pour tomorrow morning.
Thanks for your questions and comments, and supporting my channel!!!
Thank you. Love it
You're welcome, and Thank You!!!! @@Paula-po9kx
I LOVE your designs! I would love to see a video with all your products and what they are for. I know what they are for but... you guys sell different types and I don't know if you guys have a video specifically explaining what they differ 🤔 mixing when you're new is a bit intimating too. I had to do a vanity 5 times! 😅 didn't come down even on the sides... sort of thinned out...
Just a video explaining like I'm 5 years old can go a long way for beginners. Most of your videos show the epoxy already mixed. If you guys can explain each one that you are using how much, and which epoxy and why that one particularly. Thank you!! I appreciate you all.
Thank you so much, and that's a great idea to put together a beginner tutorial, per se. I will work on that.
I've been building and designing countertops for customers full time and you can see most of my work on my website at www.kcdcdesigns.com
Thanks again!
Thak you so much! I will be watching out for it. Love you guys! 🥰@@kcdcdesigns
Omg, that is beautiful. Im going to try it i want white marble with black , gold and silver just like that but i want the black thinner🔥🔥🔥
Thank you! (and sorry for the late reply).
There are so many options, please keep me posted on your project, and feel free to reach out if I can be of help.
Have fun and thank you so much for supporting my channel!
Keith@kcdcdesigs.com (keep me posted!)
@@kcdcdesigns Want base can be used to make the counter from scratch? I dont have any old counters to start with.
@@candyj4321 I use 1/2" MDF for most of my sample boards, if that's what you're referring to?
To make actual countertops I use 3/4" MDF. I also have several fabrication tutorials on my channel if that will help.
Great video. It turned out really nice. What's type of torch are you using?
Thank you! The torch is a Bernzomatic TS4000. It's important to be sure the torch has the holes at the bottom of the nozzle so it doesn't go out when it's inverted.
What do you recommend for no yellowing.
What not to do?
What you must do?
All epoxy resin will "amber" over time, just the same as the siding on our homes will discolor, and in many cases don't match from the north side of our house to the south side. That being said, epoxy should never "yellow". If it yellows, the yellowing is typically caused by a chemical reaction of some sort. Either the undercoat paint hasn't completely off-gassed, using colorants that are not UV resistant, overheating the epoxy and/or colorants, etc.
I've been doing this full-time for over 4 years, including many white/light colored countertops and none have "yellowed".
So, IMO what must be done is to always follow best practices in order to achieve and expect the best results.
I hope that makes sense, and thank you for the great question!
Hey bro, love it! Your epoxy work is awesome! I just finished my first countertop today! Turned out awesome! I could use some advice though! So..with the flood coat, I deshedded the roller, I mixed my epoxy perfect ratio..and then proceeded to pour over the tacky surface! It smoothed over...but there were still a few little imperfections in the surface! Do you have any tips for resolving this? Thanks
Hey there and thank you! And congrats on your first countertop, that's awesome!!!!
Send me some pics at Keith@KCDCDesigns.com, I'd love to see it and we can also discuss your question more, and chat on the phone if you'd like.
Regarding your flood coat, it may depend on what type of imperfections you're seeing. If they're dimples, that could be from micro bubbles that didn't get popped, and popped late when the epoxy was too set up to self-level. If it's wavy, that could be from torching too late. It could also be from not using enough product for your flood coat. When you figured square footage, did you include the 1.5" drop edge in your measurements? Doesn't seem like much, but on a large countertop it can make a difference when determining the 3oz/sf for the flood coat. Lastly, it sounds as if you used a roller to apply your flood coat? I've only used a 1/8" x 1/8" square notched trowel to assure even and consistent coverage, so maybe the roller left, or created some thin areas on the surface? Not sure on that one.
Send me an email and let's chat some more.
Again, congrats on your first countertop and thank you for your kind words (and supporting my channel!).
Keith, email me at Keith@kcdcdesigns.com
@kcdcdesigns hey Keith, thanks for the information. I'll get some pictures over to you soon! I'll also send some contact details. Meeting up to discuss the epoxy will be great!
@@krisloan2378 You're very welcome, and I look forward to it!
@@krisloan2378 It was great chatting with you, Kris! Best of luck, have fun and keep me posted!
Same Keith, thanks for the awesome advice! Keep those great designs rolling! 🤩
This is my first video of yours ive seen. Im intrigued to say the least. Am subscribing to learn more
Hey there, and thank you so much!
And he can sing as well. Just found your channel. I have been watching many videos to learn different ways of various applications. This turned out really nice. Thanks for the video.
Thank you so much, and I'm glad you found my channel and hope you find it helpful!
Browse around as I mainly have tutorials showing how I create different designs, and please subscribe if you would! Thank you!!
@@kcdcdesignsYou are welcome.
Another incredible design!
Thank you, I appreciate that!
Hi I just planing on do it to my kitchen can I ask why some people used tap around the edges and you don't, well that's your first video I hatch, hop you answer me
Hey there and great question.
I rarely tape my edges because I rarely use more than 3 oz/sf of epoxy. If I were to tape my edges, when I pull the tape there's not enough material on the surface to flow over the edges. If I'm using 5 oz or more per square foot of epoxy (like a dirty pour for example), a tape dam is used to keep the excess epoxy on the surface from just running over the edges. Then when I pull the tape at the right time (1.5 - 2 hours later, depending on temps), there's enough epoxy on the surface to slowly flow over the edges.
Did that make sense?
O I see, thanks you I just want to make shure I do it the right way
@@antoniotzul8807 you're welcome, always glad to help!
Good luck and have fun with your countertops!
Looks great
Thank you so much!!!
Does the epoxy you use turn yellowish over time? If yes how do you maintain a good look?
All epoxy resin products will "amber" over time, but should never "yellow". I've been installing epoxy countertops for 5 years, many of them a white marble look, none of which have "yellowed". Yes, they may have ambered a bit, but only noticeable if placed beside a newly poured white piece.
Darker colors, even if they have some white in them, will never be noticeable, IMO as long as all best practices are applied when pouring.
@@kcdcdesigns thanks man, really appreciate that
You're very welcome!
I like it. I love it....
haha, I let my excitement get the better of me, lol
Thank you, my friend!!!
🫠❤