Am I correct in that, you basically created a single stage, using a hs clear mixed with a bass coat? I have tried this but normally don't have the time to let it cure properly. Looks amazing!
Awesome! Could you do this with the paint in touch up bottles... i.e. Toyota 070 white pearl? (The price for this paint is astronomical... and out of my reach... @ $700 US.)
Like always great video,thank you for taking the time to share your knowledge.so I noticed you tape around the scratch this time,to create less of the mess??it make sense.
I have a similar scratch on my door and a local shop told me to leave it alone because the whole panel needs to be repainted as the color "is hard to match", I wish there was professional enough shops around that can do same as you did
I bought a original touch up stick from mercedes. There are 2 components, the basecoat and the clearcoat. So can i just mix these 2 and apply like in yor video?
This color base and hardner and today on the channel I will post a new video with UV coating and scratch removal in 5 minutes (clean coating without hardeners)
Posmatrajući majstora, dok to radi, sve izgleda tako jednostavno. Svaka čast!
Hvala prijatelju
superbly done with no effort thanks
Am I correct in that, you basically created a single stage, using a hs clear mixed with a bass coat? I have tried this but normally don't have the time to let it cure properly. Looks amazing!
Bravo maestro! 👏
Hvala😉
So amazing man!!! Didn't know this could be achieved. Brilliant!!!
Tnx my friend and enjoy
what kind of paint are you using?
Great work man. How much did this cost the customer?
Awesome! Could you do this with the paint in touch up bottles... i.e. Toyota 070 white pearl? (The price for this paint is astronomical... and out of my reach... @ $700 US.)
Killer job good work!
Tnx bro
Like always great video,thank you for taking the time to share your knowledge.so I noticed you tape around the scratch this time,to create less of the mess??it make sense.
Tnx
I have a similar scratch on my door and a local shop told me to leave it alone because the whole panel needs to be repainted as the color "is hard to match", I wish there was professional enough shops around that can do same as you did
Unfortunately, I am far away and I would like to be able to help
what do you call the scraper you use of the excess paint
Awesome job
Tnx friend
1:22 trese se ti ruka nešto..trebaš jednu rakijcu da ju smiriš :D
Good luck sir....
I bought a original touch up stick from mercedes. There are 2 components, the basecoat and the clearcoat. So can i just mix these 2 and apply like in yor video?
This color base and hardner and today on the channel I will post a new video with UV coating and scratch removal in 5 minutes (clean coating without hardeners)
Impressive you can put us more Videos Thank you
The best !! 💯👍🔝💪
Very impressive! How often do you burn through the clear coat doing this? And how do you handle that? Thanks
In very deep scratches, can you apply many layers to fill? letting dry 24 hours between coats? and clear 2k and polyester base color 50/50??
you have a lot of different videos on my channel about filling key scratches and different methods are shown as in this video
What compound are u using to polish it an what pad are u using would be nice if u mentioned it......
Ewocar compound and ewocar wool
Zdravo, jer se moze upotrebit boja od touch up pen koja se kupi npr. od VW?
Kupis boju po kodu koji je na autu
Great job 👌🏻
Tnx bro
Where get same paint code and which pad u used
Very very good job!
I want ask, what color paint you used? Solvent base or water base paint?
Solvent
@@Amddetailing so this is not acrylic paint? Just ordinary paint use in body shop repair?
Have a similar technique but use nail varnish (blended to get a very close colour match) then 2k clear over the top. Thanks for posting the video
Tnx bro
Awesome🤩🙌
Tnx bro
Very good buddy 👍
What number pad you use to buff?
Can this clear and harder can be mix with any base coat paint?
Yes you can
Can you wet sand it down without using a scraper?
yes of course you can but there is a possibility to swallow the factory coating
Najjaci majstor
Hvala brate
Amazing!
Tnx bro
With these color fill kits they sell these days could we do the same thing minus the hardener and other product you used?
One layer of clear and it would be gone completely. Still very cool for a quick fix.
Yes bro tnx
Still can see the repair !!!!!
Clear coat mixed with waterbased color ? :)
Yes
It would be a much better and more effective video if you would speak and explain products you're using
watch the other videos, you have an explanation