Hello, I have the same problem with my Chrysler. First the passenger side went, then the drivers side. I have been putting it off for months but now seeing this video I will have a look over the weekend to try and sort it. Great upload and nice job by the way. Thanks!
FANTASTIC!!! It took me longer to disconnect the battery! I found two broken wires, one obvious and one with a white mark on it and when I bent it slightly you could see the weakness. Thank you so much. John Gloucester UK
Thanks for this video! One of my doors opens most of the way, but stops. The panel inside the door was broken, and wouldn't snap in all the way, so when you would open the door it would rub up against the outsid of the van. The door would stop at the exact moment the inside door panel would rub up against the van, so I replaced the panel. The new panel fits perfectly so that it doesn't rub up against the outside of the van, but the door still stops in the same spot. I'm going to check the wires next. Thanks again!
Just fixed the drivers side and yes, it had one broken wire. I have soldered it together and works great now! Just need to check the passenger side! Thanks for the info on this. It helped a lot. 😀✌
I originally made this video last year, just reuploaded it because there was problems with the music/soundtrack i had on the original video triggering off the copyright thing with youtube, it worked out handier to delete the original video and reupload this muted version. I didnt watch the real fixes real fast video for this problem, it was yahoo answers that pointed me towards checking the wires at the time.
Here in N ireland there are plenty of both the ordinary and grand voyagers, this particular voyager in the video is a 2005 2.8 Diesel. Although i dont see as many driving round as there used to be.
thanks -- got my door working great but the plastic wire protector would not go back together at the links.. any ideas?? also how does the harness hookup on the rocker panel end hook up??
I think these european voyagers are built in austria, i know from looking on wikipedia of the plymouth and dodge versions here we only have the chrysler voyager. What about engines in washington, do you get the 2.8 diesel?
Una pregunta cómo se le llama a la tipo cadena que protegen en los cables de la puerta y si la venden es que mi camioneta voyager XL se le rompieron y andan los cables así sueltos
HI, the general term for that part is "plastic energy chain" that will possibly start the research into finding what you need. Although i would advise joining the relevant chrysler voyager owners club pages/forums and asking on them as there may be people who have a better idea of what works to fix that part.
Hi, Any more info on what is the problem? Is the gear that drives the door stuck? The car in this video was one a neighbour owned and luckily the wires fixed it, I don't have a huge amount of experience of working on other aspects of the voyager although its a relatively simple in its construction I haven't worked on enough of them or on one recently to advise accurately. Perhaps one of the owners clubs for the Chrysler voyager (or dodge/plymouth derivatives) would be a better place to ask this question.
Hello, I have a great Caravan 2005 and there won't be the right door. Can you support me with a tutorial? I no longer have access to this voyager, its been a long time since it was here, dont even know if it is on the road anymore. Unfortunately i do not plan on buying one.
That would probably be the better long term solution, although it might be better to strip out the loom and remake the door loom DIY using quality wires instead of these flimsy ones chrysler seemed to use.
Been trying to figure out where the other side of the harness connector goes, is it up inside the door panel? Our wires got pinched and several of the links broken / wires frayed, so am looking to just replace the entire harness but can't find anyone that says how to take it all the way out. Everyone just disconnects from the door side and replaces it.
just repaired the right hand sliding door on my 2004 Chrysler Grand Voyager. Many thanks for this video, my door is now fully functional.
Hello, I have the same problem with my Chrysler. First the passenger side went, then the drivers side. I have been putting it off for months but now seeing this video I will have a look over the weekend to try and sort it. Great upload and nice job by the way. Thanks!
FANTASTIC!!! It took me longer to disconnect the battery! I found two broken wires, one obvious and one with a white mark on it and when I bent it slightly you could see the weakness. Thank you so much. John Gloucester UK
Good stuff, glad to hear it worked.
Thanks for this video! One of my doors opens most of the way, but stops. The panel inside the door was broken, and wouldn't snap in all the way, so when you would open the door it would rub up against the outsid of the van. The door would stop at the exact moment the inside door panel would rub up against the van, so I replaced the panel. The new panel fits perfectly so that it doesn't rub up against the outside of the van, but the door still stops in the same spot. I'm going to check the wires next. Thanks again!
Just fixed the drivers side and yes, it had one broken wire. I have soldered it together and works great now! Just need to check the passenger side! Thanks for the info on this. It helped a lot. 😀✌
Thanks for sharing, I was able to fix the problem in a few minutes and save a lot of money. Thanks from México 😎👍🏻
Great to hear that the video helped, greetings from Ireland
Thanks. Helped me with my door.
Worked well, thanks for uploading. For my car there were no less than 6 breaks in one wire. I ended up replacing most of it. Thanks again.
excellent video mate! same thing happened on mine. now working as good as new!
Great to hear, thanks!
No volume
Just great 👍
thanks forma sharing this video,. Solved un 20 min At home after spending muy time and money un a repair shop. thanks from Spain
Great to hear thanks for the comment
I originally made this video last year, just reuploaded it because there was problems with the music/soundtrack i had on the original video triggering off the copyright thing with youtube, it worked out handier to delete the original video and reupload this muted version.
I didnt watch the real fixes real fast video for this problem, it was yahoo answers that pointed me towards checking the wires at the time.
Here in N ireland there are plenty of both the ordinary and grand voyagers, this particular voyager in the video is a 2005 2.8 Diesel.
Although i dont see as many driving round as there used to be.
thanks -- got my door working great but the plastic wire protector would not go back together at the links.. any ideas?? also how does the harness hookup on the rocker panel end hook up??
I think these european voyagers are built in austria, i know from looking on wikipedia of the plymouth and dodge versions here we only have the chrysler voyager.
What about engines in washington, do you get the 2.8 diesel?
Thanks for the comment
En español gracias por la ayuda que nos da con ese problema thanks
Gracias por el comentario
you learned this from real fixes real fast, did'nt you! :)
Do you have to solder it together? Not sure if that is the correct word.
Tks for share. 🙏
You are Welcome 👍
Una pregunta cómo se le llama a la tipo cadena que protegen en los cables de la puerta y si la venden es que mi camioneta voyager XL se le rompieron y andan los cables así sueltos
HI, the general term for that part is "plastic energy chain" that will possibly start the research into finding what you need.
Although i would advise joining the relevant chrysler voyager owners club pages/forums and asking on them as there may be people who have a better idea of what works to fix that part.
my door is grinding and hard to open and close...how can I fix that?
at 5:40 my volume was on high and Holy shit it sounded like a shop vac started by my head!
Haha it is quite loud i suppose
Thanks but i took it to someone & they fixed it a peice of plastic worked it's way inthere !!
Superb thanks for the update, that would have been tricky to have diagnosed through the comments but great to hear that it is working correctly now.
Sliding door will open but when you go to close it back half will Not close because of gear !! how do i fix it ??
Hi,
Any more info on what is the problem? Is the gear that drives the door stuck?
The car in this video was one a neighbour owned and luckily the wires fixed it, I don't have a huge amount of experience of working on other aspects of the voyager although its a relatively simple in its construction I haven't worked on enough of them or on one recently to advise accurately.
Perhaps one of the owners clubs for the Chrysler voyager (or dodge/plymouth derivatives) would be a better place to ask this question.
hola tengo una cmta gran Caravan 2005 y no habré la puerta derecha me puedes apoyar con un tutorial
Hello, I have a great Caravan 2005 and there won't be the right door. Can you support me with a tutorial?
I no longer have access to this voyager, its been a long time since it was here, dont even know if it is on the road anymore. Unfortunately i do not plan on buying one.
you can also just buy a new wiring harness.
That would probably be the better long term solution, although it might be better to strip out the loom and remake the door loom DIY using quality wires instead of these flimsy ones chrysler seemed to use.
i saw new ones for $100. save alot of time.
***** thats about £60 here, quite a lot for a few wires.
Been trying to figure out where the other side of the harness connector goes, is it up inside the door panel? Our wires got pinched and several of the links broken / wires frayed, so am looking to just replace the entire harness but can't find anyone that says how to take it all the way out. Everyone just disconnects from the door side and replaces it.
$100 seems cheap to me. you cant even get a shop to open your hood for less then $85.