Like your vids , picked up an E46 recently and you have been a source of good info. As a retired mechanic I must say my hat is off to you , keep it up young man , it's a great feeling to have somebody like you to pass the torch along to.
Hey doing a 6 side swap on my 01 325i from a 04 330i I'm down to the drive shaft and the don't mate I have a drive shaft shop near by can the just swap the connection point for the drive shafts. Side by side they look very close
You are a good kid and I'm sure you will be very successful in your new So. Cal. shop. Just an fyi, take a look at the "reddish" TH-cam videos about e46 repair and refurbishment. The complete sub frame repair and color matched powder coating of all under carriage parts, inc. bolts, lines, springs, shocks, etc... It cost about $25k but is an amazing result... Keep up the good work!
HEHE just what i needed super excited for the swap videos it will be extremely helpful for me as i will be doing this so very soon, auto to 6 speed :) ill try to get all my parts now
He prices it out if you watched it all. Somewhere between 3k and 4K depending on who does the work and how much preventative maintenance you want to do.
This will probably go unnoticed but personally I bought an entire car 325i sedan with a blown motor and 6spd trans for $500. That way I didn’t have to worry about forgetting anything or buying parts, it’s going in an 04 325i sport package touring we bought for $900 with a blown torque converter seal (auto transmission was likely toast too being run dry) also bought a new clutch kit+flywheel and main seal
This is a crazy question. How strong are the e46 325xi 5spds? Reason I’m asking is I’m doing a VWtdi swap in my Land Rover Disco 1 that currently has a ZF auto. I want to swap in a Manuel. I am looking at the 325xi trans because it has a t-case. I would delete the BMW t-case and use the Rover case. The BMW has the starter on the same side as the VW. My train of thought is that the outputs of the 2 ZF trans might be the same splines, over using a manual out of an American 4x4. I can get this trans for a $150.
Hey. love your videos man. Do you know if you can swap a 5 speed to 6 speed quite easily? I’ve got a 5 speed manual 325ci and think a 6 speed would be a good upgrade.
How do you deal I think it's a neutral safety switch that doesn't allow the car to start unless it's in park or neutral... We did the switch from auto to 5 speed manual on a 98" 328i convertable & this was something we overlooked... Thanks for any help you can offer & all your useful content...
I did the swap thanks to you but I have 1 problem, my car runs on 3k rpm in 5th gear at 120km/h when it used to do 2.5k rpm with the automatic gearbox, can you help me solve this problem?
Great video. Is the dme and ews wiring same for a 2001 e39 with ms43? also how about the drive shaft rule of thumb, just change the forward section? thanks
I have a 330xd automatic. I rally like this car and have put a lot of time and money into it to make it feel like new again. Im thinking abot swapping the gearbox since the auto really doesnt give the engine justice. What gearbox can i use? And do i need anything special for the xi or can i ditch the xi and just make it rwd instead? Really doesnt matter as long as its manual..
I recently bought a zf 5 speed transmission for a e46 (328ci manual swap), at the moment all I need is the drive shaft. I've read that I have to get the drive shaft specifically for a zf transmission. Is that true or?
i have a 02 330i and looking to do this same project... Problem I see is that I see lots of transmissions but not sure if they will fit my car? Any suggestions what t look for? i was thinking 6 speed or should I just look for 5 speed? Tips?
I do have a question about leaks under the car? I have a 2001 330xi with 245k miles leaking oil and drips of antifreeze in the front part of the car. The car runs good gut I sense that I should get to the source of the leaks before too long. Any recommendations?
love the e46 vids. seems like everywhere on youtuber everyones been going e36. can you make a vid comparing e36 vs e46 and pros/cons between both of em ?
Just bought a auto 01 330ci that the trans went out and was removed by shop because the car owner couldn't pay lol so this would be interesting to do 🤔
Hi I've converted my bmw e46 320i from automatic to manual and everything works fine, but doesn't have Power when driving on hill. So wanted to ask that should I also change the computer box and you a manual computer box?
@@megatronn194 literally bought a pretty clean 2001 330Ci auto, black leather interior, for 1400 bucks last night. No chance would I find one with a manual that cheap lol
Great work fella just wondering don't the technician is the USA Wear steal toe capped boots iv dropped a box on my toes but luckily it only dropped from a few inches but without them on its broken toes ! Ps when I say box I mean a transmission in England we say gearbox or box for short
Hey I got a question for everyone. So I have a 2001 bmw 330ci and I want to swap out the manual 5-speed transmission in it. My question is can I fit a e46 M3 6 speed manual tranny in the 330ci? I’m wondering if it is possible and what parts or kit I will need.
Where did you buy all the parts from? I have a 2001 330ci E46 that has an auto with 179,000 miles... it's starting to show age and is leaking dirty oil. I really want to keep the car because it's one of my favorite memories of my dad. Thank you, great video!
All of the new parts can be sourced from ecstuning.com or fcpeuro.com. Other used parts like the pedal assembly, driveshaft, manual transmission can be sourced from craigslist, the forums, facebook marketplace, or any salvage yards. Good luck with the car man and hope my videos continue to help you keep the car on the road!
I got a 2001 330CI automatic and got the p0741 code every now and then when I make longer trips on the highway.. Do you think it's gonna fail on me? Seriously thinking about making a conversion to manual..
Might also have to change the belt drive vibration dampener on some engines BMW no. 11237805696. Because you can stall an engine with manual transmission the drive needs to have a one direction rotational unit build in.
Hey Man I Love Your Videos I've always go to your channel for info for my 3 Series. I have a question. My 325xi has a transmission issue. When it's cold it runs and drives great but when it gets hot it's like the transmission disengages the engine still runs but it just won't go forward or backwards please help.
I am considering doing this swap on my 1999 323i. I have found a 5 speed manual transmission from an 1998 328i; I was wondering if you know if this would be compatible with my car.
Bom dia , Me chamo Arthur, sou do Brasil, e tenho uma E39 528i touring 1998 chassi BX33999 transmissão automática, por gentileza você teria alguma sugestão de Conversão de Transmissão dessa série 6cc em linha
Hi I am planning on doing this to a x5 3.0 td just wondering how you do the electric side as will it start as car will think am I in park or not cheers
I got a werid problem with my 2000 e46.. Its been sitting for a while while I was waiting to get a new engine for it. Got the engine in car running perfect, changed my steering wheel recently and now when I try to start it the horn keeps going off. Im pretty sure I have everything wired correctly. The new steering wheel is from a facelifted model but all the pins for airbag etc are the same. Can someone help pls
This channel is an E46 goldmine. Keep up the good work man
Like your vids , picked up an E46 recently and you have been a source of good info. As a retired mechanic I must say my hat is off to you , keep it up young man , it's a great feeling to have somebody like you to pass the torch along to.
Thanks for the kind words! Hope to keep helping people through my videos for a long time to come!
Hey doing a 6 side swap on my 01 325i from a 04 330i I'm down to the drive shaft and the don't mate I have a drive shaft shop near by can the just swap the connection point for the drive shafts. Side by side they look very close
Well done dude. You genuinely sound clued up
Your awesome take your time don't get to stressed got alot on your plate and the people helping
You are a good kid and I'm sure you will be very successful in your new So. Cal. shop. Just an fyi, take a look at the "reddish" TH-cam videos about e46 repair and refurbishment. The complete sub frame repair and color matched powder coating of all under carriage parts, inc. bolts, lines, springs, shocks, etc... It cost about $25k but is an amazing result... Keep up the good work!
u inspire me to keep my e46 and never let it go needs alot of work and u live 2 hours from us so i myte visit u guys cant wait for ur gf ls3 swap :)
You in SoCal?
HEHE just what i needed super excited for the swap videos it will be extremely helpful for me as i will be doing this so very soon, auto to 6 speed :) ill try to get all my parts now
What would you need for a 6 speed swap on a 330ci?
Super, super informational! Keep it up man!
What about the computer and harness for an auto to manual conversion?
Keep vids coming informed and "on to it!" Carry on doing what you doing!
Hey dude, weighing in all the parts needed for the conversion. What is the total cost for the conversion?
He prices it out if you watched it all. Somewhere between 3k and 4K depending on who does the work and how much preventative maintenance you want to do.
@@soldat2501 1700 in parts.
This will probably go unnoticed but personally I bought an entire car 325i sedan with a blown motor and 6spd trans for $500. That way I didn’t have to worry about forgetting anything or buying parts, it’s going in an 04 325i sport package touring we bought for $900 with a blown torque converter seal (auto transmission was likely toast too being run dry) also bought a new clutch kit+flywheel and main seal
What about the clutch delay valve? Is it gonna stay or are you removing it? What's your opinion about CDV remove?
Another great video, keep it going!
This man is definitely certified 💯☝🏽✈️
I’m excited I just got all the parts I need except for the front driveshaft lol
This is a crazy question. How strong are the e46 325xi 5spds? Reason I’m asking is I’m doing a VWtdi swap in my Land Rover Disco 1 that currently has a ZF auto. I want to swap in a Manuel. I am looking at the 325xi trans because it has a t-case. I would delete the BMW t-case and use the Rover case. The BMW has the starter on the same side as the VW. My train of thought is that the outputs of the 2 ZF trans might be the same splines, over using a manual out of an American 4x4. I can get this trans for a $150.
I have a 04 330i auto and manual drive shaft auto rear trying to put manual front but the teeth were they joint aren't going together
Awesome!!! keeping doing this DIY for E46... Its help-me so much!!!
Hey. love your videos man. Do you know if you can swap a 5 speed to 6 speed quite easily? I’ve got a 5 speed manual 325ci and think a 6 speed would be a good upgrade.
Hi. What about the rpm. Will it remain at 6500 or with the ecu at to mt switch the rpm will change?
How do you deal I think it's a neutral safety switch that doesn't allow the car to start unless it's in park or neutral... We did the switch from auto to 5 speed manual on a 98" 328i convertable & this was something we overlooked... Thanks for any help you can offer & all your useful content...
I did the swap thanks to you but I have 1 problem, my car runs on 3k rpm in 5th gear at 120km/h when it used to do 2.5k rpm with the automatic gearbox, can you help me solve this problem?
Kinda wish y’all were still in LA :/ I’m considering swapping the transmission.
Great video. Is the dme and ews wiring same for a 2001 e39 with ms43? also how about the drive shaft rule of thumb, just change the forward section? thanks
Did this to my lincoln town 1991 love it
Which is recommended
Getrag or ZF
2002 BMW 325ci e46?
I have a 330xd automatic. I rally like this car and have put a lot of time and money into it to make it feel like new again. Im thinking abot swapping the gearbox since the auto really doesnt give the engine justice. What gearbox can i use? And do i need anything special for the xi or can i ditch the xi and just make it rwd instead? Really doesnt matter as long as its manual..
I recently bought a zf 5 speed transmission for a e46 (328ci manual swap), at the moment all I need is the drive shaft. I've read that I have to get the drive shaft specifically for a zf transmission. Is that true or?
Gog the same car 328ci auto and looking for manual swap . If you have update on your project I would like to know . Thanks
@@TheAlfie4uTV i have been driving my car for about 6 months after the did the swap 👍
i have a 02 330i and looking to do this same project... Problem I see is that I see lots of transmissions but not sure if they will fit my car? Any suggestions what t look for? i was thinking 6 speed or should I just look for 5 speed? Tips?
Man I need your help I have a 2001 325xi my motors blown what would be a good replacement to put in
I do have a question about leaks under the car?
I have a 2001 330xi with 245k miles leaking oil and drips of antifreeze in the front part of the car.
The car runs good gut I sense that I should get to the source of the leaks before too long.
Any recommendations?
Hi l have one question when swap bad oto trans to another oto trans do l need swap megatronic unit olso old one to new one ? Thanks
How much roughy total for parts and labor?? I’m tryna swap out ASAP
love the e46 vids. seems like everywhere on youtuber everyones been going e36.
can you make a vid comparing e36 vs e46 and pros/cons between both of em ?
good afternoon, the autopilot was normally normal? thanks!
What wiring is required for the swap, reverse lights ect.?
Just bought a auto 01 330ci that the trans went out and was removed by shop because the car owner couldn't pay lol so this would be interesting to do 🤔
Is there any video on auto to 6 speed swap? 🤔
Can you change the floor accelerator? My auto floor accelerator pedal feels very stiff
ok let me start ordering parts!! great video, thanks!
What transmission should i get? I drive an 04 330ci
Love the detailed video!
The Petrolhead language....😍
some please also replace the differential is it necessary?
I have the Manuel transmission for my 328i e90 sedan, could you do the swap for me. thanks
Im gonna be manual swapping my 03 325xi touring
Hi I've converted my bmw e46 320i from automatic to manual and everything works fine, but doesn't have Power when driving on hill. So wanted to ask that should I also change the computer box and you a manual computer box?
Hey dude! want to convert my E61 automatic to manual do you have idea how to do it or know what parts do i need to do it?
I don't know why he doesn't just sell it and buy a manual, but it certainly looks like we'll get some good videos out of this swap.
It's kinda hard to find a manual for less with the color, interior trim etc you're looking for.
@@thumpertorque_ Everything you said, plus the fact that we cannot find a manual variant that hasn't been ragged on.
@@megatronn194 literally bought a pretty clean 2001 330Ci auto, black leather interior, for 1400 bucks last night. No chance would I find one with a manual that cheap lol
@@iMatt246 i bought a 2002 330ci 2door sport coupe for 4 grand its automatic with the tiptronic transmission but i want to convert it to manual
@@dankie3612 I got an 05 325xi manual for 1400 🤣
Great work fella just wondering don't the technician is the USA Wear steal toe capped boots iv dropped a box on my toes but luckily it only dropped from a few inches but without them on its broken toes ! Ps when I say box I mean a transmission in England we say gearbox or box for short
does the driveshaft need to be rebalanced if you use the auto half of the driveshaft?
Hey I got a question for everyone. So I have a 2001 bmw 330ci and I want to swap out the manual 5-speed transmission in it. My question is can I fit a e46 M3 6 speed manual tranny in the 330ci? I’m wondering if it is possible and what parts or kit I will need.
Where’s your shop at? How much would you charge to supply all needed parts and to install?
Where did you buy all the parts from? I have a 2001 330ci E46 that has an auto with 179,000 miles... it's starting to show age and is leaking dirty oil. I really want to keep the car because it's one of my favorite memories of my dad. Thank you, great video!
All of the new parts can be sourced from ecstuning.com or fcpeuro.com. Other used parts like the pedal assembly, driveshaft, manual transmission can be sourced from craigslist, the forums, facebook marketplace, or any salvage yards. Good luck with the car man and hope my videos continue to help you keep the car on the road!
Have a question
I bend the same parts to my 2006 bmw 325i e90
Yeah im stupid so Idk where to even source a manual transmission -__- But I wanna do this
FrnchFriez same
How much would you charge to do this swap for me?
i 2 wood like 2 no plz
bro can a LAND CRUISER 200 diesel auto be converted into a manual?
Did your check engine lights come on after the swap ?? Mine is throwing a transmission module code
Can you please advise me what parts I need to get to convert my e46 318ti to manual. Will a normal e46 sedan Tranny and shaft work?
I have a 2001 330xi Is it possible to swap the transfer case from a GM automatic to that transmission??
I have a 2008 bmw M3 e90 Sedan But the front looks like a e92 !! So can I just put M3 92 front end on it!! Even though it’s a sedan M3
Hello, I have a question, I can’t seem to find an answer online, can a 2004 325i manual tranny fit my 2001 325i?
How do you get the cruise control and traction control to work ?
I got a 2001 330CI automatic and got the p0741 code every now and then when I make longer trips on the highway.. Do you think it's gonna fail on me? Seriously thinking about making a conversion to manual..
Do the 323ci and the 323i have the same transmission
what about the 2003 330ci?
cause i have an auto that i want to convert to manual. what will i need to purchase? thanks!
Are the driveshaft different on coupes and sedans
No, driveshafts are different between models like 323/325 and 328/330.
Thank you very much!!!
How much does it cost to manual swap it
How about the procedure for a 1999 328i?
Does the flywheel conversion kit you showed work on a (2005) 330i as well? Can't seem to validate fitment..
Wanna do this to an x5. Would love a video on how to do this to AWD platform.
What driveshaft did you use ?
hey I know this video was long ago but im wondering if i would need all the same parts for an XI e46?
Might also have to change the belt drive vibration dampener on some engines BMW no. 11237805696. Because you can stall an engine with manual transmission the drive needs to have a one direction rotational unit build in.
can you elaborate a bit more I would like to know
Hey Man I Love Your Videos I've always go to your channel for info for my 3 Series.
I have a question. My 325xi has a transmission issue. When it's cold it runs and drives great but when it gets hot it's like the transmission disengages the engine still runs but it just won't go forward or backwards please help.
What are you going to school for? I work on bmws as well & going to school. Interested in what you're doing
hey I am going for business
I have a small question, will the valeo clutch and fly wheel kit fit on a 330i with and m54 3 liter? and obviously a 5 speed zf
did you do a video on re-coding modules to get the gear light off... and to get cruise control to work..
Hey man I'm looking at a e46 320i I was wondering which manual gearbox would I need cant seem to find exactly which box I need
does it matter which transmission you get to convert? for example, can you get a zf from a 325i to put in a 330i?
I am considering doing this swap on my 1999 323i. I have found a 5 speed manual transmission from an 1998 328i; I was wondering if you know if this would be compatible with my car.
Do u also need to swap the clusters or its all thesame? Thanks
Is the process the same for a 2004 325ci? I've heard the wiring is different?
so how much would it take to swap?
Bom dia , Me chamo Arthur, sou do Brasil, e tenho uma E39 528i touring 1998 chassi BX33999 transmissão automática, por gentileza você teria alguma sugestão de Conversão de Transmissão dessa série 6cc em linha
Hi I am planning on doing this to a x5 3.0 td just wondering how you do the electric side as will it start as car will think am I in park or not cheers
Could you use a 2011 328 manuel in to a 1996 99 328 e36 thks
Do u ve to change the diff too
Does anyone have a link to that flywheel+ clutch kit?!
2005 bmw 330i m54
Can’t find this kit ANYWHERE
Bay Area, CA
Where to buy BMW E46 Geniune parts?
What transmissions fit what engines and which ones arent compatable
I got a werid problem with my 2000 e46.. Its been sitting for a while while I was waiting to get a new engine for it. Got the engine in car running perfect, changed my steering wheel recently and now when I try to start it the horn keeps going off. Im pretty sure I have everything wired correctly. The new steering wheel is from a facelifted model but all the pins for airbag etc are the same. Can someone help pls
Are these the same with e39?
Can you make a parts list with links? I know that sounds like a lot lol
Isnt it cheaper just buying a manuel?
Do you know how different this swap would be for auto to 6 speed?
Bro what are the clutch lines names
How much would it be to change that
Very impressive and well explained video. I liked and subscribed to see more.