How To: Samsung Drain Hose DC97-12534E
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- How To Replace: Samsung Drain Hose DC97-12534E www.appliancep...
Symptoms: cracked causing water leak from under washer.
Tools: 5/16" nut driver, Phillips screwdriver, towel, flathead screwdriver, container, pliers, locking pliers.
This Samsung made Washer Drain Hose replaces the following older part numbers on Samsung Washers: 2076235. Buy the new Washer Drain Hose DC97-12534E here: www.appliancep...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros
Seriously a hero.
I thought the whole thing would be a disaster but I followed along every step and it worked. About a 45 minute job.
Thank you!
I just finished doing this repair. I second the comment about the sharp edges. Awesome video. Thank you so much!
Thanks for this excellent video. I have a newer Samsung model (WF350AN) that has the drain pump on the right side, but the steps are the same.
Glad you were able to complete your repair. If there is anything else we can help you with in the future please let us know.
Amazing video thank you It helped me replace my samsungs washer drainage hose housed inside.
seriously.. it's easier to buy another! so just to change the hose you must disassemble to pieces.. everything? samsung should stop hiring drunk engineers
Make the consumer remove electronics and door seals to make a minor repair?? Now that's some top notch planned obsolescence! Bravo Samsung! What's their stock symbol??
Stock symbol?
If you just remove the back panel you can access the hose from underneath the washer by putting it on its side
Yah that’s really ez with a 400 lb washer 🙄
@@mongoosemcmongoose2786
It’s easier then disassembling the washing machine. You just tilt it against the wall or dryer to access the bottom .
Very insightful, thank you :)
Just for clarification, when you say "put it on its side", which side should I put it on?
(face down, so the door is touching the floor? or would it be ok to put it on one of the other sides so that I do not damage the door or control panel?)
Also, how should I prep the floor before I start?
(To minimize any damage to the machine & unnecessary water spillage when disconnecting the hose)
@@maximtube
Hello
I actually just tipped the washer if you were facing it to the right and leaned it against the wall just angled enough I could access the bottom of washer.
Yes have a cloth and bucket ready . You will want to remove the little drain hose and place in bucket first .
Hello I can ask you?
Everything was going so well until I cut my hand lifting at 4:48 now I’m bleeding, I’ll survive but wear gloves
This can’t be the best easiest way. What the heck, LG?