How to Replace Wheel Bearing & Hub Assembly 06-13 Chevy Impala
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
1A Auto shows you how to repair, install, fix, change or replace a worn out, vibrating or groaning rear wheel bearing hub. This video is applicable to the Chevy Impala, model years 06, 07, 08, 09, 10, 11, and 12.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaed/1A...
• 10mm Socket 1aau.to/oTx/1AX...
• 13mm Socket 1aau.to/o2e/1AX...
• 14mm Socket 1aau.to/o2e/1AX...
• 19mm Socket 1aau.to/oqD/1AX...
• T30 Driver 1aau.to/oqA/1AX...
• 1/2 Inch Breaker Bar 1aau.to/oj5/1AX...
• Ratchet 1aau.to/oafX/1A...
• Torque Wrench 1aau.to/ouo/1AX...
• Bearing Grease
• White Grease
• Floor Jack 1aau.to/osz/1AX...
• Hammer 1aau.to/okk/1AX...
• Jack Stands 1aau.to/osL/1AX...
• Large C-Clamp
• Wire Brush 1aau.to/oed/1AX...
For More Info visit us at 1aau.to/h/a9C/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
i guess Im pretty randomly asking but do anybody know of a good site to stream newly released tv shows online ?
7 years later and the rust made this 7 times tougher. Rip to any of you poor souls attempting this on an 09. I had to go around the back where the backing plate connects to the knuckle and hammer a screwdriver all around it. If you do it like in the video with the hammers you can risk breaking your parking brake shoe or bend the backing plate (that's what my stupid self did). I ruined a couple screwdrivers but eventually popped em off.
😁😁
Thanks for watching. Have a great day! 1aauto.com 888-844-3393
Thanks for the video. Love the Bonneville in the bay behind the Impala.
Thank you for watching, and we love it too! Have a great day!
1A Auto.com 888-844-3393
learned alot from you guys, but here it was easier to separate the backing plate from the spindle, from the backside with an air chisel.....09 impala, whole job took an hour
Thank you. Other videos I watched had you pulling those 2 star bolts in the back while the hub was still on. Your technique was much easier without a lift.
The best parts dealer/ video's on TH-cam
Thanks for this video... About to start on this shortly... rotors, brakes, and the wheel bearing
Thanks for checking us out. 1aauto.com +Robert Wainwright
Thanks for the video. The dealership wanted to charge $350 to have them installed and I had the part already. This will save me some moolah. Thanks again.
Thank you for watching. Please let us know how the repair comes out!
1aauto.com 888-844-3393
I have a 2011 Chevy impala Lt and I just want to make sure this goes for my vehicle also. Love your videos. I have the part saved in my cart on your web site and I just want to be sure.
Yes, the rear wheel bearing and hub assembly referenced in this video is listed to be a direct fit for the 2011 Chevy Impala. Hope this helps you out! +dubj3434
Wish I found this video before I struggled with trying to uninstall and install those T-30 torque bolts on the backside of the flange lol. I got it done but it took me twice as long as it should've!
Great video I got to do this to my 01 Chevy impala but the dust shield is crap gonna go ahead and replace both rear dust shield s along with both the hubs.
Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393
Have fun finding new dust shields for the rear. I gave up looking and cleaned up the old ones the best I could.
I hope you all see this considering that it's been years since this video was posted. Where can I locate those wheel cylinders for the parking brake shoes??? I'm having the hardest time finding them.
This video was an excellent reference tool. Just used it to assist me when I changed the rear Hub/Brgs on a 2005 Chevy Impala. My only comment is that the torque for the (4) hub bolts was only shown at 40-50ft/lbs. They seemed really loose yet at that setting. updates??
I became lost with the reassembling of the hub plate and spring part. looked iffy putting it all back together. seemed like a bit of uncertainty in the guy putting it back.
hello. i did everything just like the video. however when the wheel was off the rotor spun freely. when i put the tire back on and hand tight one lug nut the tire wont move now. took the tire off and rotor spins freely. what does this mean?
The rear hubs on my impala don't have the sensor on the back. But the new hubs I bought have them, can I still install them or do I need to get new ones
I come to 1a auto to do things by the book.
is adjustment required for wheel hub parking brake
how about an updated video for a 2014 and newer rear bearing replacement.
Does anyone know for a fact. If it's the same with a civilian Impala and the police interceptor Impala
What about the front hubs? I'm replacing the CVs, so why not the hub/bearings (300,000 miles)
Timothy, you may have the plug for the anti lock brakes still unplugged from the hub...
I have a 2007 Chevy Impala LS and I’m wondering if it matters if I get the rear wheel bearing and hub assembly with abs brakes or without abs brakes? Does it really matter which one I get and which one is safer?
+depres Ep Thanks for watching! Yes if you have ABS you will have to get hubs that are equipped for it. Same goes for non-ABS models, get the part that is for models without it.
1A Auto: Repair Tips & Secrets Only Mechanics Know okay thank you!
changed my right rear wheel bearing it was bad and it still didn't turn off the abs light I also replaced the whole abs harness in the rear and I'm still getting c0045. what else could it be?
+07n54 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
hi i need help to replace the rear wheel bearing of my 1962 impala, did you have any tutorial?
Does anyone know if I should ac delco or aftermarket part?
hi that ball bearing can be replaced insted of change all rhe hub assembly
is this the same for the front wheel bearings?
+Miriam Uvalle No, the front a different process. Unfortunately we don't have a video for that repair right now, but we'll keep it in mind for future work! For anyone else who might be doing this job, we carry the parts shown in the video on our website. Order from us and we'll cover the shipping. Here's a link: www.1aauto.com/1A/wheel-bearing-hub-rear/Chevy/Impala/1ASHR00074?TH-cam&CTA%20Comment&ATony
great video 1aa thanks for sharing
+Mark Ferraro Thanks for watching. We're glad you liked it. 1aauto.com 866-403-3393
So I changed my rear hubs but now when I press my brake pedal at the climax of the braking my pedal starts shuddering like intensely. I changed the pads and inpsected the rotors they aren't warped I have a feeling it's something to do with the emergency parking cable
+eric uribe We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Great video! Thanks
Thank you for the feedback! +Michael Morris
Nice video
complicated proCdUr, bt gr8 viDO👋
Will this clear ABS and traction control sensors ? Took it to AutoZone and ABS code was C0035 but I also have a service braking assist message on . I’m so frustrated 😞
If you replace the hub assembly it should clear those codes. If not, you may have a break in one of the two wires for the wheel speed sensor, which plugs into the hub. These impalas are notorious for wire breaks/frayed insulation on the above mentioned wires, especially the front. I have had breaks and frays on both side fronts of my 2011. If you have problems with the front hubs/wiring, you will get the bonus "Stabilitrac" code 😁.
hey I just changed my rear hub / rotors / & brakes... now my abs light and traction control is on what could cause this on my 2007 Chevy impala?
That what is was I took it to the shop and fixed it
The wiring will get weak and break the wire due to flexing near the hub (you may not be able to see this due to the coating on the wire. I replaced the plug connection and 18" of wiring and it was the cure on a 09 impala. Mistakenly also replaced the axle hub first and threw out a perfectly good part.
Is this the same process for the front ??
complic8ded proCdUr.. but good viDO👋
Is changing the rear wheel bearing the same as changing the front passenger one? Please answer me thanks
Thank you for watching. The process may be a little different.
888-844-3393
Thanks
Do you by chance have any tips for determining which rear bearing is bad? I jacked it up and spun the wheels by hand, but I am not hearing anything when spinning by hand, except for the brakes dragging the rotor. Tried having my wife drive past me. She could hear the noise from inside the car, but I couldn't hear anything outside the car. I definitely know it's the rear making noise, since I've already wasted a crap ton of money replacing both fronts. I don't want to have to replace both rears because I screwed up again and replaced the wrong one again.
Oh and there is no movement in the bearing when I wiggle it.
Thanks for any help or advice you can give.
+bkpickell Typically to test a wheel bearing, you would grab the top and bottom of the tire (while it's lifted off of the ground), then try to move the wheel back and forth to see if there's play in it. If there is, then the wheel bearing is likely bad or is going bad. Hope this helps you out. We carry new hub assemblies on our website 1aauto.com
Jack the car up and with the tire and everything still mounted. Put your hands on the top of the tire and try pulling towards you and pushing away from you. If there's ANY PLAY that's the one. If no play, perhaps it's just your rotor
Hey what studs are you using.
Thanks for the Excellent video guys! I gotta do this this weekend! Lol
Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393
Could you possibly tell me what size those torx30 bolts are? Like the actually size not the bolt head shape
+Cameron Lebrasseur Thank you for checking us out. We do not have the exact size, but you may attempt to call a dealership for the exact size. 1aauto.com
Getting this assembly off (the part where you have to hit it with a hammer) is seriously difficult. Is it really supposed to be this hard? I almost feel as though it's welded on! Is there any possibility there's a slight difference in a 2011 Impala LT where there's some extra bolt I'm missing or something? Or do I just need to really hit it hard and hope I don't break something?
Never mind. I finally got it off. Just took some 50 good wacks with the hammer, producing rusty dust all over the place. One thing to note was the parts didn't have the ring and spring assembly for the e-brake. 2011 Impala LTs must have a different setup or something. Just a heads up for those of you who are looking to do this. I was actually relieved, since that part looked like the most complicated of this whole process.
aviation_nut I have a 2011 Ltz Impala that I have to do this on the driver side rear. My question is do they have t30 bit on the back? I just want to make sure that I have all the tools before I get started. Also they failed to mention that you need a break service tool to retract the piston for the back calipers. Thanks for the info!
@@beardeddude2613 they listed a C clamp. That is used to press the pistons.
Hitting one hammer with another is really an unsafe idea, especially without wearing proper eye protection. Hammer faces are hardened and can chip very easily
How about a rear wheel bearing on a 2007 Chevy Aveo with rear drum breaks
+Rodney Derby We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
Hell I'd love a video of that. Working on a PoS with rear drums as well.
3:16 Anyone know where I can get some of these bolts at this part in the video? The 4 bolts that hold the hub to the axle. Like, I know auto parts stores would have them, but what do I call them. What do I say I need, size etc? A link would be even better.
Just call them wheel hub mounting bolts
They're called chin nuts. Ask someone at the counter to get them for you
thank you sir is a Chevy Malibu max the same presses?
It may be a different process. We currently do not have an auto repair video on that particular repair. 1aauto.com
Thank you sir those are great videos
is this the same on chevy monte carlo 05
+Raphael De La Ghetto This will be a very similar installation process.
That ring is loose and does not stay on properly for mine. How would i fix that?
+Ethan Wilson It should be loose once you take off the backing plate anyway. Hope this helps you out. 1aauto.com?TH-cam&CTA%20Comment&ATony 866-403-3393
1A Auto Parts It loose when I'm trying to put it all back together so it feels like a have to bend it back in shape
I can not get my rear hub off, it is "stuck" on, any tricks or tips
+Barry Casteel If you bang it off like shown in the video at 3:58, it should come free. Hope this helps you out. Here is a link to the new wheel hub assemblies that we carry as shown in the video goo.gl/6EqA69
Had to use a slide hammer with a flange puller on mine
I used a chisel and a hammer it was hard as hell..best advice is to slide a chisel in between the knuckle and the backing plate and hammer away.
How do you no if your rear hub is bad need help.
Usually it will make a scraping sound or a whine.
Look like 15mm bolts on the bracket 👁
My car is 2004 impla
We carry the rear wheel bearings for your 2004. Here's a link to them on our website with FREE SHIPPING in the lower 48 states. www.1aauto.com/2004-chevy-impala-rear-wheel-bearings-and-hubs/y-mo-c/2004-23-67?TH-cam&VideoReply&ATony