How to Replace Front Wheel Bearing & Hub Assembly 2015-2019 Hyundai Sonata
ฝัง
- เผยแพร่เมื่อ 10 ม.ค. 2023
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHF00732
This video shows you how to install a new wheel hub and bearing on your 2015-2019 Hyundai Sonata. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2015 Hyundai Sonata
2016 Hyundai Sonata
2017 Hyundai Sonata
2018 Hyundai Sonata
2019 Hyundai Sonata
Tools you will need:
• Pry Bar 1aau.to/oJJ/1AXAA00020
• 10mm Wrench 1aau.to/oMn/1AXAA00010
• 17mm Wrench 1aau.to/oMn/1AXAA00010
• 10mm Socket 1aau.to/oaPc/1AXAA00017
• 14mm Socket 1aau.to/oa6y/1AXAA00015
• 17mm Socket 1aau.to/oa6y/1AXAA00015
• 21mm Socket 1aau.to/o3Y/1AXAA00043
• 32mm Socket 1aau.to/obX/1AAST00003
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/o6/1AXAA00289
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/oaq/1AXAA00278
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oaC/1AXAA00288
• Brake Caliper Compressor Tool. Single Piston. Screw Style. 1aau.to/oF/1AXAA00012
• Brake Caliper Hanger 1aau.to/ogK/1AXAA00439
• 1/2 Inch Breaker Bar 1aau.to/oqa/1AXAA00078
• 3/8 Inch Breaker Bar
• Ratchet 1aau.to/obhF/1AXAA00016
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/oxG/1AXSS00035
• Rust Penetrant
• Surface Prep Discs 1aau.to/om/1AXSS00076
• Center Punch 1aau.to/ojP/1AXAA00055
• Drain Pan 1aau.to/otH/1AXAA00320
• Floor Jack 1aau.to/oRn/1AXAA00068
• Hammer 1aau.to/oMh/1AXAA00091
• Jack Stands 1aau.to/oL2/1AXAA00065
• Punch
• Rubber Mallet 1aau.to/ofq/1AXAA00413
• Sledge Hammer 1aau.to/oMh/1AXAA00091
• Wire Brush 1aau.to/oqf/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
✅ Not filmed on a potato
✅ No key steps missed during jump cuts
✅ Straight to the point instructions, no extra talk or promotion
✅ Vehicle specific torque settings provided
This procedure is the same for my i40 (facelift have a hub rather than separate bearings). Many thanks.
This video worked for me. I was able to replace the hubs on my 2016 Santa Fe. I very much appreciate you telling us the millimeter of the socket required and the torque settings.
Well demonstrated. I now have confidence in replacing the front hub bearing of my 2014 Hondai Sonata. I shall be using your piece as reference while complete my project. I will share the video with others. Thanks for a demonstration well done.
Just a heads up, your videos on the front and rear bearing hub assemblies is exactly the same as a 2015 Kia Forte/Forte Koup. It would increase traffic to your videos if you added that info to your video title. Once again great job these 2 videos have got ALL other videos of this age of Kia/Hyundai vehicles beat by a long shot.
Kudos to this master technician for a beautiful well executed hub replacement Looked like a pretty horrible condition vehicle maybe salt corrosion but amazing how well the job was done I couldn't believe that bleeder screw didn't snap off though LUCKY! Thanks again wish I could bring my car to this guy I am very scared to have this done by anyone but have no choice for safety sake
You put a new disc on, why does it appear to be rusty?
Wish it was the same for a 2013 sonata 🙄
Bro why you didn’t remove the whole caliper bracket 😅
I did the driver side of my 2016 sonata today, however, now it just cranks but doesn't start. It was fine before the replacement, was there anything I could've hit while loosening the hub assembly? I did have to whack it a few times as it was rusted on the knuckle. Just wondering if this was a coincident or if I did something wrong
So do you only need to replace the bad one or should you do both sides?
The box my new hub came in said warranty voided if you don't put on a new axle nut.
75foot pounds. How did you know that figure?
Moreover, when you use the torque wrench, how do you know you have reached the 75foot pound?
HOLD ON... Where did the new disk brake go? The one you fitted on 28 minute... Sold it for quick cash? Polish the old one for the sake of video, come on m8!