Yesterday i removed chock from FX STX superior liner. And i polishing barrel Today i was checking how my M3 is grouping at 50 yards. NSA 33.6 GR 3 Slugs went to exactly Same hole 2 was little of. I I'm very happy with results i can't wait to go for 100 yards or 150 Thank You for sharing Your knowledge with US!!! GOD bless You and Your family Happy new year
Man finally someone that is making this easy to understand, thank you for that. Can’t wait for you to get the Avenger rocking out some .41 groups @100yds plz keep us updated with some more videos. I have 2 avengers 22/25 and I love them but I’m ready to see how much of an improvement they will have after i follow all your tips…👊
I do the same. 100% correct. It makes a big difference. I have a short mettal rod with a slot cut in to it with a dremmel. You can cut your sandpaper in strips and pull it through the slot. That is only for the breach area to make a nice loading tapre for the slugs. I put it on a cordless drill. Then pollish the burs off the rifling at the end when done. The Spa barrels are quite soft. Have to be carefull. The Avenger barrel was super hard and took a lot of work. When done you should be able to almost drop that slug to loading depth.
If selecting a .25 cal LW barrel to shoot strictly slugs, would you get the Poly barrel or Std 10 groove barrel? Would you get the Choked or Unchoked version? Do you believe a 17.7" twist would be good to shoot slugs? Hoping to hear from you.
@@farzadzamanfar1904 that’s pretty simple. I have a really great understanding of how the air flow is where it flows from. What pressures need to be. I have to watch the video. I don’t know if I said something wrong. I’m coming out with some new videos, chill and pressures. Working pressures. Oh my guns shoot over 1100 FPS they’re all supersonic and they all shoot under a half inch group at 100 yards. I’ll be showcasing how top guys shooting expensive guns saying that you can’t shoot. Super sonically accurately is totally wrong. It actually helps your accuracy with slugs.
@@amazingairguns6350 sorry man I didn't mean to offend you Where you were talking about replacing the valve with the plastic one the direction you described was reverse But maybe I'm wrong Thanks
@@farzadzamanfar1904 how can I be mad if I made a mistake and you called me out for it. I’d be pretty ignorant. It’s not you . It’s a good thing. If I made a mistake I need to correct it. I got some really good videos coming up. Lotta good stuff mostly for slugs but you can use it with pellets to.
@@farzadzamanfar1904 AEA has a really great lineup coming out. They’re all gonna have the option to filter the 7000 psi. They will be shooting 1200 FPS with heavy slugs. And her accuracy is unbelievable. It’s awakening that you see a new company 7 years old. Making barrels so precise that they are achieving accuracy. That companies have been around for 100 years can’t get close to. Check out the MCAR . I think the backyard airguns just did a video on it. He’s shooting it at 5000 psi fill pressure so lower pressure. And it still shoots unbelievable groups of 400 yards. I messaged him I told him to get the 7000 PSI kick so he can tighten the group up to half of what it is. And that air gun looks like a Barrett 50 CAL I think it’s 5 foot tall. You gotta check it out.
@@farzadzamanfar1904 I just hope that the prices don’t skyrocket. Everybody should be able to shoot a really great air rifle. But not at a crazy price. The gauntlet two SL 30 with 78 grain slugs. A $500 gun will shoot a 2 inch group at 200 yards. You don’t have to be rich to be extremely accurate. Do you
@@airgunsofidaho4886 You think i can remove chock from my FX slug liner like with this method?? I'm not gonna drill I'm going to polish super crazy lol
@@tkielek24 I personally wouldn't remove it. I would just reduced the chock. Using very fine sanding paper and polishing paper should help reduce the chock.
Thanks..Have a leshiy 2 with the LW barrel...No magasine wobbeling. Some diviations in fps (+/-15 fps).. And a flyer every 5-10 shots. (1" at 60 Y)....Low fps do not correlate with bad accuracy. Either do high fps..
Happy new year to you too and all you guys I hope you all do the tricks I’m teaching you and improve your accuracy we’ve got a lot to cover we’ve got a cover waiting your guns adding wait till the gun itself if you’re a bunch resting but we got so much to cover there’s a lot triggers but we’re going to get it done
Rifled barrels have "Lands" and "Grooves"..............he says "these grooves"............as he is pointing to the LANDS. But he's a Master Gunsmith....BWWWWWWWWWWAHhhhhh
Thanks for sharing your intel with the common folk. I’ll send you my new Kral Puncher Jumbo Dazzle in for a tune video. I can include some of the ammo I shoot through it. I’ve been swaging 17, 19 & 22gn hp slugs for it. It shoots them ok, but not as good as some pellets at closer ranges & there are the annoying flyers. Also the hammer hits pretty loud. Not sure if there’s anything that can be done about that. It’s putting out 34 fpe.
@@terminadorairgunsandoutdoors I seen your vid polishing your kral I think it was. Do you think lapping it the way he showed first then a polish would make it more accurate. Cause you're polish alone got a significant improvement. I have an avenger doing 2" at 100 yards. ½" at 50 so I imagine the cuts on the pellet are affected more by the wind at longer range. And idk if it would be worth it or not. Or just polish and leave as is.
@@JoeMama-hl5qc Hard to say. My Kral barrel saw a big improvement, but my Uragan barrel didn’t have any noticeable affect. It was already a pretty accurate CZ barrel. Maybe the less expensive barrels just need a bit of finish work done to them to reach their full potential.
Lol thats not how you lap barrels roflmao or take away chokes... Also valve return spring dose very little on valve opening force.. like next to nothing.. reshaping valve seal and having it flat reduces it far more. Reason you gain alot on certain airguns by removing valve return spring has more to do with valve return spring and its bushing obstructing dirrect flow and causing turbulence and slowing flow out from valve... Only thing you are correct on is that you dont really need valve returnspring or its bushing on anything in traditional valves.. but this is nothing new lol...
@@ezrabrook3993 lol what dose that have to do with facts? I dont make youtube videos and this guy defo should stop making them... So bad advices that end up someone being dead, ruin their guns etc..
And now you're NOBLEONE1 ah. You badmouth all the FX Fanboys on AGN but you can't stay away. This is your 3rd attempt to play. How long before you get BANNED again?
Banning people is not the right thing to do. I remember TH-cam banned airgun channels not too long ago. Nobody liked that. Never, ever, be happy about censorship.
@@heithwatkins so please tell us what the forum owner should do when Jim just blatantly violated the posting rules? Not ban him? Just let him keep doing it?
@@RH-go2dk my only reason to dislike him aint related to FX or AGN.. but this guy is dangerous, showing catastrophical overfills for ppl, saying its ok to do so, lying that he connected this or that and its ok, iv cought him for lying in here and in AGN multiple times and usually at this point he disapers. This shit just might end up someone dying or getting seriously injured..
@@RH-go2dk OK then.........ban him. But if you do, then don't complain when Google (supposedly a public forum) bans you. I wondered how long the ban him for public "safety " would take to come up. That's always the excuse. I see JK just threw it out there. But I can find a public safety reason to ban anything, or anyone. Everyone thinks it's good to ban the other guy. But how many people do you think would love to ban all gun related content. 🤔
Your a Very Good Teacher. For the mechanically inclined. Thanks Bud
Yesterday i removed chock from FX STX superior liner. And i polishing barrel
Today i was checking how my M3 is grouping at 50 yards. NSA 33.6 GR 3 Slugs went to exactly Same hole 2 was little of. I
I'm very happy with results i can't wait to go for 100 yards or 150
Thank You for sharing Your knowledge with US!!!
GOD bless You and Your family
Happy new year
Man finally someone that is making this easy to understand, thank you for that. Can’t wait for you to get the Avenger rocking out some .41 groups @100yds plz keep us updated with some more videos. I have 2 avengers 22/25 and I love them but I’m ready to see how much of an improvement they will have after i follow all your tips…👊
Lol dont you just ruin your guns...
@@JK-sn6tv i think thats a bot this guy needs to be stopped for mis information and using bits to back
I do the same. 100% correct. It makes a big difference. I have a short mettal rod with a slot cut in to it with a dremmel. You can cut your sandpaper in strips and pull it through the slot. That is only for the breach area to make a nice loading tapre for the slugs. I put it on a cordless drill. Then pollish the burs off the rifling at the end when done. The Spa barrels are quite soft. Have to be carefull. The Avenger barrel was super hard and took a lot of work. When done you should be able to almost drop that slug to loading depth.
One of your better videos.
If selecting a .25 cal LW barrel to shoot strictly slugs, would you get the Poly barrel or Std 10 groove barrel? Would you get the Choked or Unchoked version? Do you believe a 17.7" twist would be good to shoot slugs? Hoping to hear from you.
Interested in the exact same thing, owner of a LW barrel, 600mm with "17.7 twist. Some slugs fly semi-well, others suck hard.
I'm starting to think this guy is full of shit. He doesn't answer any questions which makes him useless. Don't even bother with him.@@thenameless615
Depending on the weight of the slugs, it might not be a strong enough twist rate to stabilise the pellet enough to be accurate.
Watched all your videos, great informant! Love the passion you have for it. Hoping to see more
Great video.
Sorry for a stupid question, but what kind of oil are you taking about? Thanks a lot.
Wow...very nice & instructive video!
I polish all my barrols to. Big difference.
Thanks brother.
God bless you and your family ❤
Yes god bless them all that those aluminium pressure tubes define laws of physics and never explode.
@@JK-sn6tv 🤣🤣🤣🤣🤣🤣
Hi
I think you had a slight misunderstanding about the direction of air flow around the valve it is the other way
air is going from tank to barrel
@@farzadzamanfar1904 that’s pretty simple. I have a really great understanding of how the air flow is where it flows from. What pressures need to be. I have to watch the video. I don’t know if I said something wrong. I’m coming out with some new videos, chill and pressures. Working pressures. Oh my guns shoot over 1100 FPS they’re all supersonic and they all shoot under a half inch group at 100 yards. I’ll be showcasing how top guys shooting expensive guns saying that you can’t shoot. Super sonically accurately is totally wrong. It actually helps your accuracy with slugs.
@@amazingairguns6350 sorry man
I didn't mean to offend you
Where you were talking about replacing the valve with the plastic one the direction you described was reverse
But maybe I'm wrong
Thanks
@@farzadzamanfar1904 how can I be mad if I made a mistake and you called me out for it. I’d be pretty ignorant. It’s not you . It’s a good thing. If I made a mistake I need to correct it. I got some really good videos coming up. Lotta good stuff mostly for slugs but you can use it with pellets to.
@@farzadzamanfar1904 AEA has a really great lineup coming out. They’re all gonna have the option to filter the 7000 psi. They will be shooting 1200 FPS with heavy slugs. And her accuracy is unbelievable. It’s awakening that you see a new company 7 years old. Making barrels so precise that they are achieving accuracy. That companies have been around for 100 years can’t get close to. Check out the MCAR . I think the backyard airguns just did a video on it. He’s shooting it at 5000 psi fill pressure so lower pressure. And it still shoots unbelievable groups of 400 yards. I messaged him I told him to get the 7000 PSI kick so he can tighten the group up to half of what it is. And that air gun looks like a Barrett 50 CAL I think it’s 5 foot tall. You gotta check it out.
@@farzadzamanfar1904 I just hope that the prices don’t skyrocket. Everybody should be able to shoot a really great air rifle. But not at a crazy price. The gauntlet two SL 30 with 78 grain slugs. A $500 gun will shoot a 2 inch group at 200 yards. You don’t have to be rich to be extremely accurate. Do you
I like what you do
Lol. That's exactly what I do to my airguns barrels. I haven't see anyone making a video on this. That's alot of information
Including FX barrel,???
@@tkielek24sorry. I don't own fx airguns. I rather own 10 pcp airguns then just one fx air rifle.
@@airgunsofidaho4886 You think i can remove chock from my FX slug liner like with this method?? I'm not gonna drill I'm going to polish super crazy lol
@@tkielek24 I personally wouldn't remove it. I would just reduced the chock. Using very fine sanding paper and polishing paper should help reduce the chock.
Fx and Pollygon barrels are harder to get right and a lot more expensive if you mess it up.
Thanks..Have a leshiy 2 with the LW barrel...No magasine wobbeling. Some diviations in fps (+/-15 fps).. And a flyer every 5-10 shots. (1" at 60 Y)....Low fps do not correlate with bad accuracy. Either do high fps..
A Leshiy blew up in a guys face stay away from Russian & East European guns bro!
Hi from good old airgun boys. Andy have great day i will be watching
Happy New Year Brother.
Keep up the gr8t video info! A+++ 🐴❤️🤠🇨🇱
Happy new year to you too and all you guys I hope you all do the tricks I’m teaching you and improve your accuracy we’ve got a lot to cover we’ve got a cover waiting your guns adding wait till the gun itself if you’re a bunch resting but we got so much to cover there’s a lot triggers but we’re going to get it done
Rifled barrels have "Lands" and "Grooves"..............he says "these grooves"............as he is pointing to the LANDS. But he's a Master Gunsmith....BWWWWWWWWWWAHhhhhh
Thank you Sir
Grate video ton of good information
Happy new year
Lots of respect you have good knowledge
Game changer,
Thank you.
Thanks sir now my kral knight.25 is shooting much better 51 fpe with 34 grains slugs thanks
Thank You for sharing Your knowledge
Subscribed, always open to see how folk work on their guns.
Thanks.
Pro Tip: Remove the inner (NOT OUTER) break pads from your FRONT calipers and enjoy the best breaks ever!!!
Thank you for the video
I had to watch it twice
Loved this video! Great Job Man! You don't have to share your secrets, but we sure appreciate that you do! Moe on my wife's account.
thanks man HAPPY NEW YEAR
Next he says he cuts his barrels with hacksaw... I bet he dosent have mill or lathe lol
Hey man, don't you answer people?
My Impact FX will hit its target at 100 yards why would anyone want to do this?
Thanks for sharing your intel with the common folk. I’ll send you my new Kral Puncher Jumbo Dazzle in for a tune video. I can include some of the ammo I shoot through it. I’ve been swaging 17, 19 & 22gn hp slugs for it. It shoots them ok, but not as good as some pellets at closer ranges & there are the annoying flyers. Also the hammer hits pretty loud. Not sure if there’s anything that can be done about that. It’s putting out 34 fpe.
Most definitely would love to help you
I’m also a fan I watch your videos
@@amazingairguns6350 Wow great. I started my channel to link up with other pcp enthusiasts. That’s awesome.
@@terminadorairgunsandoutdoors I seen your vid polishing your kral I think it was. Do you think lapping it the way he showed first then a polish would make it more accurate. Cause you're polish alone got a significant improvement. I have an avenger doing 2" at 100 yards. ½" at 50 so I imagine the cuts on the pellet are affected more by the wind at longer range. And idk if it would be worth it or not. Or just polish and leave as is.
@@JoeMama-hl5qc Hard to say. My Kral barrel saw a big improvement, but my Uragan barrel didn’t have any noticeable affect. It was already a pretty accurate CZ barrel. Maybe the less expensive barrels just need a bit of finish work done to them to reach their full potential.
Lol thats not how you lap barrels roflmao or take away chokes... Also valve return spring dose very little on valve opening force.. like next to nothing.. reshaping valve seal and having it flat reduces it far more. Reason you gain alot on certain airguns by removing valve return spring has more to do with valve return spring and its bushing obstructing dirrect flow and causing turbulence and slowing flow out from valve... Only thing you are correct on is that you dont really need valve returnspring or its bushing on anything in traditional valves.. but this is nothing new lol...
Where's UR Video's??? Oop's!!!
@@ezrabrook3993 lol what dose that have to do with facts? I dont make youtube videos and this guy defo should stop making them... So bad advices that end up someone being dead, ruin their guns etc..
@@ezrabrook3993 just because you see it in a video doesn't mean it's good information...
@@SteHughes90 Are you implying that everything on TH-cam isn't real or true????
@@heithwatkins No, just some of it.
Drilling the choke out of your barrel is a quick way to make scrap metal but it's your gun, you enjoy yourself.
Like another airgun brother says, "sharing is caring" I don't remember his name. Thank you
And now you're NOBLEONE1 ah. You badmouth all the FX Fanboys on AGN but you can't stay away. This is your 3rd attempt to play. How long before you get BANNED again?
Banning people is not the right thing to do.
I remember TH-cam banned airgun channels not too long ago. Nobody liked that.
Never, ever, be happy about censorship.
@@heithwatkins so please tell us what the forum owner should do when Jim just blatantly violated the posting rules? Not ban him? Just let him keep doing it?
@@RH-go2dk my only reason to dislike him aint related to FX or AGN.. but this guy is dangerous, showing catastrophical overfills for ppl, saying its ok to do so, lying that he connected this or that and its ok, iv cought him for lying in here and in AGN multiple times and usually at this point he disapers. This shit just might end up someone dying or getting seriously injured..
@@RH-go2dk OK then.........ban him.
But if you do, then don't complain when Google (supposedly a public forum) bans you.
I wondered how long the ban him for public "safety " would take to come up. That's always the excuse. I see JK just threw it out there.
But I can find a public safety reason to ban anything, or anyone.
Everyone thinks it's good to ban the other guy. But how many people do you think would love to ban all gun related content. 🤔
@@JK-sn6tv You win 🏆
Ban him for safety award 👏
This guy have some serious split personality issues lol 3rd user going in AGN and now he talks about sending his guns to him self for a fix 🤣
Should i do the taper on the breach side of the barrel?