If anyone is using this tutorial to install your swamp runner kit, FYI, at the 0:50 sec mark I said to tighten the jam nut towards the transom. What I meant to say was towards the wings on the wing bolts. Tightening towards the transom will not prevent the wing bolts from backing out. 😎👍
I'm in the middle of putting this exact kit on a boat I built. Thanks for the tips, especially re the kill switch and the 2x4 to convince the outer shaft to seat all the way.
Thats awesome Mark! Alot of people don't even know what these are. I love it. Easier to work on then my old outboards, fun to mod and great for those who want a dependable engine on a budget. 👊😉
Awesome video. Very informative. Wanting to get and put a 12-14’ boat together. I saved this to guide me through the process. I’m wondering if you upgraded your motor?? Thank you very much.
Yes absolutely. This ones the small one but they make a mini one as well. The size swamp runner you get will depend on your engine size. Their website will have all the info you need to help you decide which one would be best for your application.
I can't really remember what I paid for it. I know I paid $100 for the 212cc engine and I think like $300-$400 maybe for the small swamp runner kit. I guess it would depend on what size kit your wanting. What size boat are you running?
Check out mudmotorkits.com. It will have the prices for the mini, small, medium, and large Swamp Runner kits and let you know what engines you can use for each kit. Hope this helps brother! 😁👍
Hey Justin! Yes sir absolutely. Yeah definitely don't skip this part or you will break it. The grease keeps everything lubricated and keeps it cool from the heat that friction generates. Plus a tub of grease like Im using in the video is only a few buck from the auto parts store 😎👍.
You know I really dont remember how much I paid for it. I know I got the engine for around $100. But you can only get the Swamp Runner kit new from www.mudmotorkits.com. I just checked and the small kit which this one is was about $500.00. 👊😎
Hey yeah it is the small kit, (not the mini) and it is the 85" shaft, which I believe is the standard with this kit. I didnt upgrade to the 100" shaft because I didnt think I would have to being my boat is a 1232 Jon boat. I'm glad i didn't. I could do without the extra 15"s unless I needed it. I am going to hop up this engine in the future and may need to upgrade to the 100" shaft if I start to out run the rooster tail but I dont think it will be a problem honestly. Hey thanks for watching and safe boating!
@@danielrichardsfishing8838 That is what we picked up as well but the model we purchased is known as the Hemi version. Putting together everything this week
If anyone is using this tutorial to install your swamp runner kit, FYI, at the 0:50 sec mark I said to tighten the jam nut towards the transom. What I meant to say was towards the wings on the wing bolts. Tightening towards the transom will not prevent the wing bolts from backing out. 😎👍
I'm in the middle of putting this exact kit on a boat I built. Thanks for the tips, especially re the kill switch and the 2x4 to convince the outer shaft to seat all the way.
Thats awesome Mark! Alot of people don't even know what these are. I love it. Easier to work on then my old outboards, fun to mod and great for those who want a dependable engine on a budget. 👊😉
Excellent video
I would use Copper anti Seize I have had issue with the silver with Spark plugs It Dried like Glue and Don't Know why???
Can you tell me how can I buy the motor base with the boat propeller because I want to buy a boat and install a machine on it
Yes go to www.mudmotorkits.com
Awesome video. Very informative.
Wanting to get and put a 12-14’ boat together. I saved this to guide me through the process.
I’m wondering if you upgraded your motor??
Thank you very much.
That's awesome brother. No my motor is completely stock.
Cool video sup from Louisiana 👍 👌
Hey Thanks JP 😁👍
Extremely Helpful video. Thanks man !
Hey thanks Dan! Hope you enjoy your motor as much as we do ours brother! Stay safe out there 😎👍
Would this be good for a 8 foot long flat bottom aluminum boat?
Yes absolutely. This ones the small one but they make a mini one as well. The size swamp runner you get will depend on your engine size. Their website will have all the info you need to help you decide which one would be best for your application.
Thanks man appreciate it
Great vid thanks for doing it helps out alot !!
Sure thing Chris thanks for stopping by bro! 👊😎
That's a cool kit and you did a great job on the tutorial. 👍
Thanks! I hope it helps people out with their builds. We are loving it! So far so good!
😉👍
Will you please tell me what is the total cost of the long tail kit
I can't really remember what I paid for it. I know I paid $100 for the 212cc engine and I think like $300-$400 maybe for the small swamp runner kit. I guess it would depend on what size kit your wanting. What size boat are you running?
Check out mudmotorkits.com. It will have the prices for the mini, small, medium, and large Swamp Runner kits and let you know what engines you can use for each kit. Hope this helps brother! 😁👍
Hi great video.
How does one buy the kit
Regards
David
Hi David! You can order the kits from www.mudmotorkit.com the kit I have is the small Swamp Runner kit.
Great vid
Hey thanks Steve!
🎣👊😎 🎣
Am I crazy or did I see smoke coming out of the boat au 3:15?
Na it was just vapor from my ecig
Do you have to use grease?
Hey Justin! Yes sir absolutely. Yeah definitely don't skip this part or you will break it. The grease keeps everything lubricated and keeps it cool from the heat that friction generates. Plus a tub of grease like Im using in the video is only a few buck from the auto parts store 😎👍.
You should have used your lock tight on your 4 engine mounts as well my friend.
Oh! .... And what is the largest propeller that that motor will push?
Hey Mary sorry for the late reply. I can't remember but I think 6.5" or 7".
How much do they cost? And where do u get one?
You know I really dont remember how much I paid for it. I know I got the engine for around $100. But you can only get the Swamp Runner kit new from www.mudmotorkits.com. I just checked and the small kit which this one is was about $500.00. 👊😎
What’s the thing called that’s holding the motor
Sorry for the late response. That is called the gimbal.
Where do I buy the kit
www.mudmotorkits.com
Hay,
is this just a standard swamp runner kit, or did you get the extended shaft?
Hey yeah it is the small kit, (not the mini) and it is the 85" shaft, which I believe is the standard with this kit. I didnt upgrade to the 100" shaft because I didnt think I would have to being my boat is a 1232 Jon boat. I'm glad i didn't. I could do without the extra 15"s unless I needed it. I am going to hop up this engine in the future and may need to upgrade to the 100" shaft if I start to out run the rooster tail but I dont think it will be a problem honestly. Hey thanks for watching and safe boating!
Daniel Richards Fishing channel okay thanks for the advice and have a good day.
You too brother! Thanks.
Thanks for video - What oar lock mounts for you have - How tall?
Do you know the model number of the motor?
Hi Max. No not right off hand but it is the 212cc predator from harbor freight which is a 6.5hp.
@@danielrichardsfishing8838 That is what we picked up as well but the model we purchased is known as the Hemi version. Putting together everything this week
Your the only one to take a test drive
😁👍.
On bos
Jau sangat bos rakam cara nak pasang alat2 injin,,tak jelas sangat