THIS is a hack that comes up with a even greater device. Love it. I've been using one of these on my garage door. BUT, how do we make physical changes to the Basic RF R2 or RF R3, to a dry relay so we can use it as a garage door opener controller? I want to use the RF side of the RF R2 or R3 with a remote. Can you show us how to change the Basic RFR2 to this type unit?, Please?
agradezco mucho tu video, me ayudo muchísimo, es muy poca la información depara la configuración de estos dispositivos, saludos desde Santiago de Chile
Hi, I would like to mount "the Sonoff" in a garden and I would like to ask two questions: does it also work mounted inside a junction box located in an external environment controlled by a 433mhz remote control? How far could it work in an open environment (the sonoff) with the radio control (433Mhz) supplied? Thanks for the reply.
I will try that too, have already make preparation and tested RF and WiFi distance. I will put that on wall that suruonds house and distance is about 30 meters with no obstacles, only router is beneath furniture, but that is no problem. I think that junction box that I have ordered from banggood strictly for sonoff rf switch should not be a problem.
a 433 old contoller rf for 4 units with dimmers didnt pair, a kinetic wallswitch rf (no battery) woulnt pair, a 4 gang cheap rf 433 controller from china worked, ... how do we know which 433 mhz rf controllers can be paired pls. is it possible any conroller with on/off separate buttons, or as the kinetic light plate 2 position, or a dimmer function or ones that keep transmitting a burst.... where is the logic to which fr 433 tx can be matched
De ce dupa scanare din aplicatia ewelink nu imi gaseste acest modul? Internetul receptionat este de la un extender wifi tp link WL-WA850RE ,telefonul se conecteaza la internet dar modulul nu.
Where can I get instructions on how to install this to a gate opener? And with big print so I can read the instructions! The instructions in the box need 10x magnification glasses.
Is there any chance to buy multiple wifi switches like this, and pair their own remote controller? I mean will they work without disturbing each other's frequency? I want to buy about 4-5 pieces in my house, and I want to make it sure they will work properly and separately. Thx
I guess these are great if your installing a light with open wiring on a table. No one has any instructions on how to install this into existing wall outlets.
You should probably reconsider your use-case if that's what you're planning to do... but I guess you could just take the socket off the wall, cut the red and black wires and put this device in between. (Make sure you turn off the circuit at the switchboard first.)
@@andrewbriscoe2481 of course before I ordered these I’d want to know if they’d even fit inside the existing electric plug box. Only other option is to install these in the attic and then setting them up would be a pain if they ever disconnected.
Hi, You can pair only one Remote, But that remote code copy to using Clone/duplicate remotes This way you can control many remotes in 1 switch Clone Remote: th-cam.com/video/Gat6zL-CIYk/w-d-xo.html
Two types of power input (AC / DC ) device available . Suppose you have AC90-250V device no polarity. The DC one connect with polarity. The Video is shown in the device AC Power Supply.
Sunny Rabius Sunny hi thanks for reply yes you are right I needed the Sonoff RF version to make them work with the remote I did replace them with the RF version now they work
a 433 old contoller rf for 4 units with dimmers didnt pair, a kinetic wallswitch rf ( battery)less woulnt pair, a 4 gang cheap rf 433 controller from china worked, .. . how do we know which 433 mhz rf controllers can be paired pls. is it possible any conroller with on/off separate buttons, or as the kinetic light plate 2 position, or a dimmer function or ones that keep transmitting a burst.... where is the logic to which fr 433 tx can be matched
![เป็นไปได้ไหม - WanMai [Performance Video]](http://i.ytimg.com/vi/Eh5hItD4Mr0/mqdefault.jpg)
THIS is a hack that comes up with a even greater device. Love it. I've been using one of these on my garage door.
BUT, how do we make physical changes to the Basic RF R2 or RF R3, to a dry relay so we can use it as a garage door opener controller? I want to use the RF side of the RF R2 or R3 with a remote. Can you show us how to change the Basic RFR2 to this type unit?, Please?
agradezco mucho tu video, me ayudo muchísimo, es muy poca la información depara la configuración de estos dispositivos, saludos desde Santiago de Chile
i know it's kinda randomly asking but do anybody know of a good place to stream new series online ?
@Alijah Quentin Lately I have been using flixzone. You can find it by googling =)
Hi, I would like to mount "the Sonoff" in a garden and I would like to ask two questions: does it also work mounted inside a junction box located in an external environment controlled by a 433mhz remote control?
How far could it work in an open environment (the sonoff) with the radio control (433Mhz) supplied? Thanks for the reply.
I will try that too, have already make preparation and tested RF and WiFi distance. I will put that on wall that suruonds house and distance is about 30 meters with no obstacles, only router is beneath furniture, but that is no problem. I think that junction box that I have ordered from banggood strictly for sonoff rf switch should not be a problem.
a 433 old contoller rf for 4 units with dimmers didnt pair, a kinetic wallswitch rf (no battery) woulnt pair, a 4 gang cheap rf 433 controller from china worked, ... how do we know which 433 mhz rf controllers can be paired pls. is it possible any conroller with on/off separate buttons, or as the kinetic light plate 2 position, or a dimmer function or ones that keep transmitting a burst.... where is the logic to which fr 433 tx can be matched
De ce dupa scanare din aplicatia ewelink nu imi gaseste acest modul? Internetul receptionat este de la un extender wifi tp link WL-WA850RE ,telefonul se conecteaza la internet dar modulul nu.
Where can I get instructions on how to install this to a gate opener? And with big print so I can read the instructions! The instructions in the box need 10x magnification glasses.
Is there any chance to buy multiple wifi switches like this, and pair their own remote controller? I mean will they work without disturbing each other's frequency? I want to buy about 4-5 pieces in my house, and I want to make it sure they will work properly and separately. Thx
It will work separately, Because the each remote is having individual frequency codes. (Each wifi device you should pair separate remote)
Thank you for the quick and useful reply.
Vice versa, is there any chance to get one switch with multiple remote controllers? Thanks
@@rivosuoth Yes, you can buy a stick with up to 6 or more buttons and pair to your Sonoff, there is a Utube Video showing this.
Hi what kind of range does the 433 keyfob have?
433Mhz remote : goo.gl/xv9Wa7
also possible to use like 3 or 5 Remotes for one RF Modul ?!
Yes Possible, Use clone/copy remote to clone the RF code from main remote
th-cam.com/video/Gat6zL-CIYk/w-d-xo.html
I have an existing 433mhz remote for my gate, can I use it to pair with the sonoff switch without affecting the existing remote frequency?
Yes you can pair it, but both devices should be some distances because both devices may on/off same time.
does this work with any 433mhz transmitter?
Yes, It will support 433Mhz tranmitter
I guess these are great if your installing a light with open wiring on a table. No one has any instructions on how to install this into existing wall outlets.
You should probably reconsider your use-case if that's what you're planning to do... but I guess you could just take the socket off the wall, cut the red and black wires and put this device in between. (Make sure you turn off the circuit at the switchboard first.)
@@andrewbriscoe2481 of course before I ordered these I’d want to know if they’d even fit inside the existing electric plug box. Only other option is to install these in the attic and then setting them up would be a pain if they ever disconnected.
Hi, do you know how many remotes can I add to 1 switch? Thanks
Hi, You can pair only one Remote, But that remote code copy to using Clone/duplicate remotes
This way you can control many remotes in 1 switch
Clone Remote: th-cam.com/video/Gat6zL-CIYk/w-d-xo.html
This will only work with SOnOff RF, not SOnOff basic. SOnOff basic supports only 2.4ghz whereas SOnOff RF supports both 2.4ghz and 433mhz.
yes
When i operate device by remote internet connect require
Internet not require when control by 433Mhz remote
Any chances of Sonoff switch catching Fire. Are these safe
Yes they are 'safe'
What if connect that pin reverse ?
Hi,
You can change the polarity Phase and neutral does not affect, but the input power use as a output (reverse connection) will not work.
Means polarity dose not matters ?
Yes, Because Its AC Power Supply.
DC Supply only require to connect with polarity.
I read somewhere if we reverse the polarity it won't start !
Two types of power input (AC / DC ) device available .
Suppose you have AC90-250V device no polarity.
The DC one connect with polarity.
The Video is shown in the device AC Power Supply.
can i ask alexa to turn off the switch after 1m or more??
Dude you could have shown the first 5 min.in 10 sec. with a few pics.!
Bez sensu można dodać tylko 4 urządzenia typu czujka pir, otwarcia , max 4!
Doesn’t work I tried it 10 time waste of my time
You have SOnOff basic. This needs SOnOff RF version.
Sunny Rabius Sunny hi thanks for reply yes you are right I needed the Sonoff RF version to make them work with the remote I did replace them with the RF version now they work
a 433 old contoller rf for 4 units with dimmers didnt pair,
a kinetic wallswitch rf ( battery)less woulnt pair,
a 4 gang cheap rf 433 controller from china worked, ..
. how do we know which 433 mhz rf controllers can be paired pls.
is it possible any conroller with on/off separate buttons, or as the kinetic light plate 2 position, or a dimmer function or ones that keep transmitting a burst.... where is the logic to which fr 433 tx can be matched