Also, worth mentioning that Alexa and Alexa App control is cloud-based (not LAN) so if WAN connectivity to eWelink servers is lost, you will lose these methods of control until service is resumed. To be fair, eWelink has been much more stable since their last major outage a few months ago. Flashing Sonoff devices allows LAN control but I'm not sure if this still works with the Alexa skill. I didn't flash my switches as I only use Alexa to control at/away from home as it works so well. HTH.
Can you set one of the buttons to send 433mh signal to other sonoff switch. Like if you had 1fan02 and a t1usc3 can you set one of the 3 buttons on the t1 to turn off the ifan02 via 433mhz? Can you put a t1 at each end of a Hall and hook one to a light and just hook power to the other and have it send 433mhz signal to the one connected to the light to make a easy 3way setup?
I am a little confused as it says UK on the box... but seems like this size would be right for the boxes here in US. So basically this will fit standard 3GANG boxes in USA?
Hey bro I have sonoff gang 3 switch but now it's having problem with touch and not able to connect with wifi too even tried with correct way ... Let me know how to make led blink or reset it.
Hi, This switch will control 3 lights/loads individually [Model T1 - 3Gang]. Buy Online:- www.miniinthebox.com/sonoff-433-remote-controller_p6332158.html?prm=2.5.1.1
I twisted neutral wire together only, One for T1 switch input another one for load/light input. Line and neutral wire should not connect together, If need Ground/earth can connect directly to load/light
@@SSR-cz9wp Input Line/live wire should connect with L-in (T1-Switch), Output light/load line wire should connect with L1-Out / L2-Out / L3-Out, Neutral wire both input & ouput connect togother and N-in (T1-Switch) Also
Hi, Is this SONOFF® T1 1-3 Gang AC 90V-250V 600W WiFi And RF 86 Type UK Smart Wall Touch Light Switch Module Works With Amazon Alexa and if yes, how does it work with 433Mhz remote?
Hi, This Sonoff t1 3gang will support 433Mhz remote, we need to pair the 433Mhz remote with sonoff t1 which is shown in the video also, (The sonoff 1gang will not support remote.)
Hi, This wall switch can use Max 600Watts, It is not suitable for Ac. Suppose your load will be less than 3500W (16Amps). you can use Sonff Pow Wifi Switch. th-cam.com/video/RRzJXI0wUOc/w-d-xo.html
I have few questions - 1. How does sonoff switch connect to my wifi router. Where i need to provide id and password. 2. How to control speed of fan using it. 3. Can i on/off light using siri(iphone).
1. Your phone connects to a WiFi network that the switch will broadcast, you will then enter your WiFi info so that the switch can connect. 2. You can't change speeds with this switch 3. Siri is not supported by ewelink, but you can host your own server and flash them with different firmware to use it with homekit. You could just install Google assistant on an iPhone though.
Vuoi controllare con lo smartphone ogni interruttore luce della tua casa domotica ? Scopri come rendere intelligente il tuo impianto elettrico mediante il collegamento con gli interruttori WiFi touch da muro Sonoff Touch, Livolo, Broadlink TC2 oppure con i relè wireless Ankuoo REC ed eMylo. lamiacasaelettrica.com/interruttore-luce-wifi-sonoff-come-collegare/
I have a question Im from Pakistan here we face Electricity failure one light gone this switch off then again when light come is this switch automatically connect to wifi router or i need to configure again
Also, worth mentioning that Alexa and Alexa App control is cloud-based (not LAN) so if WAN connectivity to eWelink servers is lost, you will lose these methods of control until service is resumed. To be fair, eWelink has been much more stable since their last major outage a few months ago. Flashing Sonoff devices allows LAN control but I'm not sure if this still works with the Alexa skill. I didn't flash my switches as I only use Alexa to control at/away from home as it works so well. HTH.
Nice vid showing all the control options. I just need to check I have a common neutral which is not common in old houses in the UK.
Can you set one of the buttons to send 433mh signal to other sonoff switch. Like if you had 1fan02 and a t1usc3 can you set one of the 3 buttons on the t1 to turn off the ifan02 via 433mhz? Can you put a t1 at each end of a Hall and hook one to a light and just hook power to the other and have it send 433mhz signal to the one connected to the light to make a easy 3way setup?
TURN THE IDIOTIC NOISE OFF.
@techlogics Did you install this in US switches?
Yes Sir
I am a little confused as it says UK on the box... but seems like this size would be right for the boxes here in US. So basically this will fit standard 3GANG boxes in USA?
Usually T1 will fit into 86 Type pvc box, we not sure about 3GANG boxes in USA
Omg...
This video doesn't teach me how to install it.
It just shows that the damn thing WORKS.
This is awful.
Really man? This is really every step you have t do, including wiring (which I cannot do)
Hey bro
I have sonoff gang 3 switch but now it's having problem with touch and not able to connect with wifi too even tried with correct way ... Let me know how to make led blink or reset it.
What outlet box does it fit in?
Hi,
This switch will control 3 lights/loads individually [Model T1 - 3Gang].
Buy Online:-
www.miniinthebox.com/sonoff-433-remote-controller_p6332158.html?prm=2.5.1.1
for ground, line and neutral do you twist them together when working with two switches in one smart switch?
I twisted neutral wire together only, One for T1 switch input another one for load/light input.
Line and neutral wire should not connect together,
If need Ground/earth can connect directly to load/light
@@Techlogics thank you so line and line cant be twisted ?
i have two live/line wires what do i do with them? can i twist them
@@SSR-cz9wp Input Line/live wire should connect with L-in (T1-Switch),
Output light/load line wire should connect with L1-Out / L2-Out / L3-Out,
Neutral wire both input & ouput connect togother and N-in (T1-Switch) Also
@@Techlogics i have an extra line wire in my wall
Nice demonstration video. Where did you get the 433ghz remote from? Also isn’t this switch made for 3 devices/lights?
That is sold by sonoff. www.itead.cc/smart-home.html here you see all there products. The remote controll is on the bottom
Hi, Is this SONOFF® T1 1-3 Gang AC 90V-250V 600W WiFi And RF 86 Type UK Smart Wall Touch Light Switch Module Works With Amazon Alexa and if yes, how does it work with 433Mhz remote?
Hi, This Sonoff t1 3gang will support 433Mhz remote, we need to pair the 433Mhz remote with sonoff t1 which is shown in the video also, (The sonoff 1gang will not support remote.)
Does that work with one of the lamps being two way ?
Can I use it to replace the 20A switch, the one u usually used on aircond?
Hi,
This wall switch can use Max 600Watts, It is not suitable for Ac.
Suppose your load will be less than 3500W (16Amps). you can use Sonff Pow Wifi Switch.
th-cam.com/video/RRzJXI0wUOc/w-d-xo.html
I have few questions -
1. How does sonoff switch connect to my wifi router. Where i need to provide id and password.
2. How to control speed of fan using it.
3. Can i on/off light using siri(iphone).
1. Your phone connects to a WiFi network that the switch will broadcast, you will then enter your WiFi info so that the switch can connect.
2. You can't change speeds with this switch
3. Siri is not supported by ewelink, but you can host your own server and flash them with different firmware to use it with homekit. You could just install Google assistant on an iPhone though.
how can i unpair? i paired 2 light with 1 botton, and now both switch on/off
You can learn a new button, that will overwrite re current one.
Could I wire my fan and light to this and control both separately?
Yes, T1 3 Gang you can control up to 3 devices separately
@@Techlogics that's awesome do you know if it's the same wiring or is it different because of the fan motor?
@@ericjouett1024 input Power is same for light & Fan
Which model should I buy for India EU/UK/us ?
Hi, EU type for India. Currently 3 Gang switch available in UK version only, voltage rating 90~250V AC, So the T1 UK version can use in india also.
Excellent explication!!!
Can it manage to run fan ?? does it support fan load
Fan u can connect, but fan speed control not available.
2A max it says. More than 2A may burn it up.
Vuoi controllare con lo smartphone ogni interruttore luce della tua casa domotica ? Scopri come rendere intelligente il tuo impianto elettrico mediante il collegamento con gli interruttori WiFi touch da muro Sonoff Touch, Livolo, Broadlink TC2 oppure con i relè wireless Ankuoo REC ed eMylo.
lamiacasaelettrica.com/interruttore-luce-wifi-sonoff-come-collegare/
Hello, I appear offline and I can not configure, what do I do? Any suggestions, thanks
does 3 gang connect 3 device?
yes, You can control 3 different devices individually
Soon
I have a question
Im from Pakistan here we face Electricity failure one light gone this switch off then again when light come is this switch automatically connect to wifi router or i need to configure again
Hi Noman you just need to configure it ones
No need to configure again
Does the touch switch work with gloves on?
yes
Does this work with Siri as well?
No
Can I switch my lights off and on from my phone when u am not at home?
Hi Sir,
Sure, You can control ON/OFF & Timer Schedule by Mobile App
Note: Switch should beconnected with Wifi Internet
Is there no ground on the switch?
No Grounding Option, If you want use ground for output devices, ground can connect directly from main input cable.
Is it possible to wire this device (1 Switch) to a 2 way Light?
Hi,
No Sir, it will control single way only
Buy 433Mhz remote : goo.gl/xv9Wa7
Oh man i wish i saw this video before i bought those freakin broadlink switches tc2. Broad link tc2 doesn't work anymore with amazon alexa.
How can I reset it to install on another wifi?
You can remove the switch from the ewelink app. After that you can just hold the button for a couple seconds and set it up if it was your first setup.
Do I always have to say turn on bedroom tv or turn on bedroom fan?! Cant i just say turn on fan .. or turn on tv?!
Suppose you have multiple device you need to say like bedroom, living room tv on/off. for single device directly can say TV on/off
TECHLOGICS what if I have 3 3gang switches in the same bedroom .. what do I name them then?!
3gang 3 different name like gang1->light, gang2->fan, gang3->tv
yes
TECHLOGICS u did not get me.. say the switch shown here in the video.. one panel has 3 switches.. i have 3 such panels in a single room..
How to install this without neutral in wall switch?
Without Neutral supply the switch will not work
Thanks my friend!
Can you give the full demention of the device please
Sorry I couldnt watch it because of the music , not that the music was that bad but so loud compared to everything else
why cant you just mute it?
Hi
How to clear RF memory from wall switch
A lot of wiring for wire less things
super !!!!!!!!!!!!!!
super !!!!!!!!
Ada nomor contak nya
Where can I Buy remote control?
Buy 433Mhz remote : goo.gl/xv9Wa7
You can use your phone as well
👍👍👍👍👍