This is the best do it yourself video I've ever seen. Down to the screw and connectors, the tabs and how to fix common issues was covered. I give it 5 🌟
This was one of the clearest, most detailed instructional videos I’ve ever seen. You have a new subscriber. Thank you so much for the exceptional work, Paul.
You cover all the little details that are necessary, but others don't show. For me, that included the location of the coarse threaded connectors and how to fiddle with the little lock on the electrical connector. Thanks so much.
Best instructional video I have ever seen! I appreciate you taking the time to remove the wheel to give us a better view of the tab, 10/10 video, coming to your channel for all instructional videos from here on out!
Outstanding video! I'm in the automotive industry as well therefore I do watch lots of do it yourself TH-cam videos and I must say that you are the very best one of them all. I will be doing this to my 2012 Dodge Ram soon! Thank you Paul!
Thanks for the extra care in taking the tire off and getting some good film angles to show that white latch that needed to be slid upward and what that trap door looked like!
Paul, Can't thank you enough for this video. What saved my butt was the one comment you mentioned regarding the 'clip' that locks/unlocks the lamp fixture. Before watching your video I was frustrated beyond measure trying blindly' to locate that ;'guillotine' clip. Your mention that the simple way to locate it is to bring your hand over to the interior of the sheet metal fender, slide your hand an inch toward the interior and voila! there it is. So freaking simple-saved soooo much time and frustration. Thanks my friend!!
Thanks Paul! My 2012 Dodge Laramie failed the State inspection because of water in the headlamp housing. They were badly sun-crazed anyway so I decided to replace them with new aftermarket headlamp housings and covers. After watching your video I realized how easy it was and just finished installing them.
Great video. I used this to replace my stock 2009 Dodge Ram headlights with the Amerilite Quad projector headlights off Amazon. The instructions worked perfectly and there was only a slight difference in the electrical connection due to the differing headlights. Very well made video Paul.
THANK YOU THANK YOU THANK YOU!!!! I watched several videos and NO ONE talked about the tab. L brackets (which I don't have) another guy said just stick a screw driver in a pry it out 😬. But your video explained it in exact detail. Many thanks.
Paul, thanks for the extra attention to detail (were you in the military) on the different looks. Picture is worth a thousand words!! I will continue to use you as a reference when needing good information.
I've had my 2009 since it was new and I have never had to change one until today, great tips on a new potential trick area[s] to prevent needless damage and frustration! thx!..
3:34:07 Paul!!!! Where have you been??? Working, I suppose! Glad to see you're fine! Thank you for the video. I don't own a Ram but I sat here and watched the whole video anyway!
Thank you so much Sandy I really appreciate you! My mother is in her 80s and is ill. I have been very busy lately, being sidetracked for now but I do my best to try to keep videos out. Please don’t forget me I won’t go away.
@@paulstoolbox Seriously, a few days ago I realized I hadn't seen a video in awhile so I went to your channel to make sure I hadn't missed one. I figured if I hadn't seen anything in another week, I was going to email you. I forgot about your mother. I helped take care of my mother, then my uncle. I know how difficult it can be. I'm hoping the best for you and your family. Stay safe! I'm here for you.
Wow Jaime, you remind me of myself. I bought my first car when I was 15 with my brother and we had to tow it home. It locked up on someone and they sold it for $100. It was a 1972 Dodge Challenger that needed fenders, a Door and to get running lol. My brother and I took the spark plugs out and put oil on the pistons. When I got out of school the next day we used a breaker bar to turn the crank. It moved so we spun the motor with the starter until the oil came out of the spark plug holes. We put the warranty spark plugs on and started it up. We bought all the body parts from a junkyard and I had a friend that painted in his garage. He did an awesome job and I wish I had that car now.! Not enough people take the time to learn, I glad to see you have the drive!
Another great video. Just a side note on working with all the Tupperware on today's vehicles. I prefer to do it on a warm day rather than a cold one to reduce the chance of snapping any of the plastic stuff. You popped the first pin at like 0:1:27, at 0:8:22, you pulled the cable mount off the driver headlamp assembly, making it free of the vehicle, so I'm calling it 0:6:55. If you hadn't commented, sure, it would be 3 minutes and change.
Thanks Curmudgeon, I know what you mean. Plastic gets pretty brittle in cold weather but I live near swamps, HOT and sticky down here. Have a great day!
@@paulstoolbox c'mon now Paul. I grew up in Pensacola, and it gets freezing cold down there, sometimes even in the low 50s. We love a good swamp. My son and I paddled a canoe 60 miles through your Atchafalaya swamp a couple of years ago. Talk about beautiful!
2 min. 58.5 seconds Great how to video! Technically dielectric grease does not conduct electricity, so it shouldn’t be applied directly to the mating surfaces (pins and sockets) of an electrical connection. It meant more for the surrounding connector to prevent moisture from entering the connector.
I honestly thought it was absolutely ridiculous to have to remove plastic shroud and grille to change my headlight bulbs. I tried doing this with out removing either. While it is possible, it’s totally worth taking a minute to remove them first, it actually was so much easier. Thank you for the video.
Hi Chris, I don’t know if you saw the end of the video but your name is up there. Do you want to see driver so please go to Paulstoolbox.com and send me your mailing information along with your channel name. Thanks buddy!
i had to stop the video n make sure i give u a thumb up. Perfect video, Very pro. helps to the T so i wont have a problem later. This is not a video most rookie You Tuber do. These days we see all these crooks hang around places like Auto Zone n rips ppl to the very knowledge of Auto zone managements, learn by messing up poor guys car n do video after the 100s trial. Thank u.
Is there anyway to adjust how the lights sit into the frame? I got it all done works great but the seam between the headlight and body of the truck is not tight like it is with the stock lights. Im sure its mostly the lights not being sized 100% correct but just wanted to make sure I wasn't missing a step to help adjust them more and get a better fit. Awesome video easy to follow and great extra tips. Ill be sure to subscribe and watch in the future!! 👍🏻
Hi Michael, you may not have seated the tabs on the back of the light in the hole that is on the truck. Sometimes you have to play with it to long it up. I had trouble with one a while back, I took it back out and looked at the back of the light to see exact how it fit. I think the aftermarket lights may sometimes be a little different.
Awesome video man. Great detail!! Got a silly question. I broke my white tab. So I need a new bracket. Lol. Would u happen to know how to remove that bracket. Because if I’m not mistaken, you gotta remove the fender and stuff. I’m talking about just the bracket with the white tab.
Brother...I just replaced the headlight on my 2015 Dodge RAM. It LITERALLY took longer to watch the video than it did to replace the bulb. I would have burned the truck and pushed it in the river if I had tried to do it without watching your video. Every detail from how to get the push tabs off to how to find that plastic slide lock in the trapdoor was spot on. BEST TUTORIAL VIDEA EVER!!
Hi Fernando, They changed the body style and I believe even the Classic 1500 is different. I recently bought another 2009 Ram with 55000 miles and I replaced the headlights. The new headlights I purchased were so easy to install, they were complete plug and play. I bought them on Amazon. The brand was Amerilite. You can check compatibility with them, I’ve been very happy with mine. Thanks!
3:41 is what I think you did it in lol I did my ford contour ones and it took me a while to make sure I knew how to put it back the same way but I did it 👍🏼💕💜
Hi Gina, you have to add two more digits Tenths and hundredths. You can send me another comment and add that if you want to. Thank you and have a great day!
Extremely well done video. I was just searching for a way to change out the bulbs but keep my headlight housing the same but after watching your video it looks like I would still have to do all this just to get to replace my light bulbs. Would that be correct?
Hey Jess, I grab the two sides like in the video. I will wiggle it sometimes to loosen it up a little bit if it is stuck and try to pull it straight out. if that doesn’t work, you can spray some WD-40 or other type of lubricant from the back window into the spot where that Gromit is, you can see it from my video and picture where it is. Sometimes that will loosen it up because the plastic gets dirty and old and sometimes sticks. It always comes out though. Have a great weekend, my friend!
Lady owner of a 2014 Laramie 1500… have to change the whole assembly because the turn signal is out. Is there a way to fix just the turn signal in the existing assembly, or do I need to just swap in new please? I have a soldering iron if needed. Would really appreciate it! Ty!
Your local AutoZone or auto parts store should be able to order a pigtail for your truck to replace it. You can also Google front or rear blinker pigtail for your 2014 Laramie. I have purchased them in the past for other vehicles, so I think you should be able to find one fairly easily. I hope this helps and good luck.!
2.48.33 Looking for some headlights for my '15 🐏!! Got condensation in driver side factory and it's annoying as hell!!! Be nice for a product update on that next video......
Hi Duane, if you take your headlight out and blow dry it, I sometimes take a sock with rice and put it in the hole of the lens and let it sit for a while, a day or so. Take clear silicone and run it along the entire seem of the backside. That usually does it. I have never had that problem with Spyder lights that’s why I went to them after I had to fix other ones. I will see that Spyder does not give you very good instructions at all but as far as the quality of the lights I am very happy. I have a follow up video on how to easily fix lights when your lights burn out often. I see this a lot of times when people replace the headlights or the bulbs. If you have any questions please send them to Paul’s toolbox.com, I will do my best to answer. Thanks!
You'd think that they would build them to be water tight, wouldn't you? But my OEM lights leaked and filled up with water. Well, not full, but a lot of water. I dried them and sealed them around the edge with silicone caulk. It probably wouldn't hurt to caulk the new ones to prevent them from leaking in the future. I'm replacing my original faded lights now and that's what I plan on doing.
This is the best do it yourself video I've ever seen. Down to the screw and connectors, the tabs and how to fix common issues was covered. I give it 5 🌟
Absolutely 💯💯🎉🎉
Agreed 💯
This was one of the clearest, most detailed instructional videos I’ve ever seen. You have a new subscriber. Thank you so much for the exceptional work, Paul.
What a great video, thanks from a 2016 Ram owner in Ireland.
Hands down best do it yourself video I've ever seen! Thank you so much!
Hands down clearest and most helpful video I have found on removing and installing headlights for the 2009-2018 Ram. Thanks for a great video!
Thanks buddy, I really appreciate that! Have a good night!
Thanks buddy, I really appreciate that! Have a good night!
Instructions are very well done and video is amazing. Great job my guy
I don’t normally comment on anything but this video was so detailed and helpful it deserves ALL the comments! Thanks for putting this together.
You are awesome and you made my day better! Thank you and have a great weekend buddy!
Thanks. Great "how to" video. (No unnecessary rambling; only the facts man.)
You cover all the little details that are necessary, but others don't show. For me, that included the location of the coarse threaded connectors and how to fiddle with the little lock on the electrical connector. Thanks so much.
I really appreciate the level of detail and the extra steps for the tab in the back. This is a great video.
Best instructional video I have ever seen! I appreciate you taking the time to remove the wheel to give us a better view of the tab, 10/10 video, coming to your channel for all instructional videos from here on out!
Outstanding video! I'm in the automotive industry as well therefore I do watch lots of do it yourself TH-cam videos and I must say that you are the very best one of them all. I will be doing this to my 2012 Dodge Ram soon! Thank you Paul!
Thanks for the extra care in taking the tire off and getting some good film angles to show that white latch that needed to be slid upward and what that trap door looked like!
Paul, Can't thank you enough for this video. What saved my butt was the one comment you mentioned regarding the 'clip' that locks/unlocks the lamp fixture. Before watching your video I was frustrated beyond measure trying blindly' to locate that ;'guillotine' clip. Your mention that the simple way to locate it is to bring your hand over to the interior of the sheet metal fender, slide your hand an inch toward the interior and voila! there it is. So freaking simple-saved soooo much time and frustration. Thanks my friend!!
Awesome my friend, I had a hard time locating it the 1st time as well. Have a great weekend!
Yes .. finding the sliding clip was the hardest part.
Yes sir. Was getting ready to put it back together and take to my mechanic. 😅
Thanks Paul! My 2012 Dodge Laramie failed the State inspection because of water in the headlamp housing. They were badly sun-crazed anyway so I decided to replace them with new aftermarket headlamp housings and covers. After watching your video I realized how easy it was and just finished installing them.
Seriously? Did the headlight work?
Thanks for posting this video. It was very helpful. Got both low beams swapped out in less than an hour.
Your video shows clearly how to get in there to change the light bulb. Thank you very much!
Thanks...now 2 years after you made this video, but it has given me the confidence to consider upgrading the headlights.....2014 3500....
Great video. I used this to replace my stock 2009 Dodge Ram headlights with the Amerilite Quad projector headlights off Amazon. The instructions worked perfectly and there was only a slight difference in the electrical connection due to the differing headlights. Very well made video Paul.
Great useful video. I can't wait to see other tutorials you produce. You have a new subscriber.
THANK YOU THANK YOU THANK YOU!!!! I watched several videos and NO ONE talked about the tab. L brackets (which I don't have) another guy said just stick a screw driver in a pry it out 😬. But your video explained it in exact detail. Many thanks.
Paul, thanks for the extra attention to detail (were you in the military) on the different looks. Picture is worth a thousand words!! I will continue to use you as a reference when needing good information.
I have not seen a better how to video in my life. Thank you.
Great video. Thanks for taking the time.
Great video Paul! Thanks for the detail on the inside clip.
Nice Paul great tips for RAM Dodge trucks from 2009-2018. 4:10 sec it took you
Took us 5 mins after watching video thank you bro very much !!!
Glad it helped, thank you!
Thank you brother for the information.I was able to change my bulbs.
Glad I could help, than you!
Excellent Video. Very informative.
It was so helpful and made my headlight replacement a breeze. Thank you for this video.
Great video. I changed my light assembly by using a long extension so as not to remove the grill
Very good video...thank you for being so thorough
Thank you & the truck looks really nice with those light.
Best instructional video, you earned a sub.
Hi Paul, as usual, another awesome instructional video I'm saying 3:22:18 to change out the light.
Extremely helpful. Thank you.
I've had my 2009 since it was new and I have never had to change one until today, great tips on a new potential trick area[s] to prevent needless damage and frustration! thx!..
Thanks for the guidance on this man. Made the job simple. Good idea on keeping the plugs in the cover too.
Thanks this videos was really helpful
3:34:07 Paul!!!! Where have you been??? Working, I suppose! Glad to see you're fine! Thank you for the video. I don't own a Ram but I sat here and watched the whole video anyway!
Thank you so much Sandy I really appreciate you! My mother is in her 80s and is ill. I have been very busy lately, being sidetracked for now but I do my best to try to keep videos out. Please don’t forget me I won’t go away.
@@paulstoolbox Seriously, a few days ago I realized I hadn't seen a video in awhile so I went to your channel to make sure I hadn't missed one. I figured if I hadn't seen anything in another week, I was going to email you. I forgot about your mother. I helped take care of my mother, then my uncle. I know how difficult it can be. I'm hoping the best for you and your family. Stay safe! I'm here for you.
Great video. Very informative. Thanks!
Hey Paul, I'm going with 3.38.15 to change out the light. Thanks for another great video.
Thanks a lot, really helped me a lot trying to fix my truck without help as a 16 year old.
Wow Jaime, you remind me of myself. I bought my first car when I was 15 with my brother and we had to tow it home. It locked up on someone and they sold it for $100. It was a 1972 Dodge Challenger that needed fenders, a Door and to get running lol. My brother and I took the spark plugs out and put oil on the pistons. When I got out of school the next day we used a breaker bar to turn the crank. It moved so we spun the motor with the starter until the oil came out of the spark plug holes. We put the warranty spark plugs on and started it up. We bought all the body parts from a junkyard and I had a friend that painted in his garage. He did an awesome job and I wish I had that car now.! Not enough people take the time to learn, I glad to see you have the drive!
What a great video. Thanks for taking the time to get a good view of the tabs, and excellent tips
Another great video. Just a side note on working with all the Tupperware on today's vehicles. I prefer to do it on a warm day rather than a cold one to reduce the chance of snapping any of the plastic stuff.
You popped the first pin at like 0:1:27, at 0:8:22, you pulled the cable mount off the driver headlamp assembly, making it free of the vehicle, so I'm calling it 0:6:55. If you hadn't commented, sure, it would be 3 minutes and change.
Thanks Curmudgeon, I know what you mean. Plastic gets pretty brittle in cold weather but I live near swamps, HOT and sticky down here. Have a great day!
@@paulstoolbox c'mon now Paul. I grew up in Pensacola, and it gets freezing cold down there, sometimes even in the low 50s.
We love a good swamp. My son and I paddled a canoe 60 miles through your Atchafalaya swamp a couple of years ago. Talk about beautiful!
Thanks man ! You made that easy enough 👍🏻
Thank you Jim!
Thank YOU So Much
You made this so simple than most videos I’ve seen❗️💯🏆
Great video, thank you! Made swapping lights out on my 2010 Ram a breeze. Especially nice since they didn't come with any instructions!
2 min. 58.5 seconds
Great how to video!
Technically dielectric grease does not conduct electricity, so it shouldn’t be applied directly to the mating surfaces (pins and sockets) of an electrical connection. It meant more for the surrounding connector to prevent moisture from entering the connector.
You make a good how to do it video very thorough 👍
3:44:16 Glad to see you're doing well. Keep up the great content !!
I honestly thought it was absolutely ridiculous to have to remove plastic shroud and grille to change my headlight bulbs. I tried doing this with out removing either. While it is possible, it’s totally worth taking a minute to remove them first, it actually was so much easier. Thank you for the video.
2:20.15 - Love you vids, and the different topics. I wasn't expecting this one though!
Hi Chris, I don’t know if you saw the end of the video but your name is up there. Do you want to see driver so please go to Paulstoolbox.com and send me your mailing information along with your channel name. Thanks buddy!
@@paulstoolbox I did see that Paul, and was blown away. Then I became sure that the Chris R. had to be somebody else. I emailed you!
Another well done video Paul! 2.48.38
i had to stop the video n make sure i give u a thumb up. Perfect video, Very pro. helps to the T so i wont have a problem later. This is not a video most rookie You Tuber do. These days we see all these crooks hang around places like Auto Zone n rips ppl to the very knowledge of Auto zone managements, learn by messing up poor guys car n do video after the 100s trial. Thank u.
Thank you, I really appreciate you for taking the time to make my day better!
Thank you for your service
Thank you, I really appreciate that, have a great day!
Thank you paul!!
Excellent Video!!
So, those hall joint retainer clips when you remove the light, mine snapped in half. Where can I get them? What are they caller
Let’s see more automotive how to videos! This along with all your work is great. Thanks
Great video
Oh yea I’m ready for this challenge!
Great video as always Mr. Paul...
Nice truck bro!😎👊🏼✊🏽🤜🏼💥🤛🏼
Hi Arturo, Don’t forget to put a time in here.....
Thank you! Just replaced my headlight because of this video.
I really like those headlight housings what brand are they ? I'd like to change my factory housing out
You the Man!! Great video
Very helpful, thank you very much!
Thank you for your help
whats the link for that headlgiht ?
Is there anyway to adjust how the lights sit into the frame? I got it all done works great but the seam between the headlight and body of the truck is not tight like it is with the stock lights. Im sure its mostly the lights not being sized 100% correct but just wanted to make sure I wasn't missing a step to help adjust them more and get a better fit. Awesome video easy to follow and great extra tips. Ill be sure to subscribe and watch in the future!! 👍🏻
Hi Michael, you may not have seated the tabs on the back of the light in the hole that is on the truck. Sometimes you have to play with it to long it up. I had trouble with one a while back, I took it back out and looked at the back of the light to see exact how it fit. I think the aftermarket lights may sometimes be a little different.
Awesome video man. Great detail!! Got a silly question. I broke my white tab. So I need a new bracket. Lol. Would u happen to know how to remove that bracket. Because if I’m not mistaken, you gotta remove the fender and stuff. I’m talking about just the bracket with the white tab.
Thanks buddy!@ great help
Thank you Hector, have a great night friend!
Brother...I just replaced the headlight on my 2015 Dodge RAM. It LITERALLY took longer to watch the video than it did to replace the bulb. I would have burned the truck and pushed it in the river if I had tried to do it without watching your video. Every detail from how to get the push tabs off to how to find that plastic slide lock in the trapdoor was spot on. BEST TUTORIAL VIDEA EVER!!
Thanks for sharing man!
Great Video
Hi, how I can find the headlights to buy it I like it
As a carpenter, that cats paw trick just saved me 20 bucks and a trip to the store
Hi Paul! Do you know if the 2020 model is the same process? 😅
Hi Fernando, They changed the body style and I believe even the Classic 1500 is different. I recently bought another 2009 Ram with 55000 miles and I replaced the headlights. The new headlights I purchased were so easy to install, they were complete plug and play. I bought them on Amazon. The brand was Amerilite. You can check compatibility with them, I’ve been very happy with mine. Thanks!
Awesome!! Thanks
Thank you and have a good night!👍👍
you the man!
Thank you Eric, I really appreciate that buddy!
3:41 is what I think you did it in lol I did my ford contour ones and it took me a while to make sure I knew how to put it back the same way but I did it 👍🏼💕💜
Hi Gina, you have to add two more digits Tenths and hundredths. You can send me another comment and add that if you want to. Thank you and have a great day!
Paul Ricalde 3:41.24
Paul Ricalde thank you so much paul your such a kind soul luv you 3:41.24
@@GinaBeana_Tootsie Thank you Gina and God bless you!
3.21.14 is my guess. Love the videos
3:31:33 is what I think. Thanks Paul.
Good Job Son! 🤟
Extremely well done video. I was just searching for a way to change out the bulbs but keep my headlight housing the same but after watching your video it looks like I would still have to do all this just to get to replace my light bulbs. Would that be correct?
Yep.
What size bulb do I need?
Awesome my beloved Amazing Brother ... 10 minute guess
How do you snap that piece out of the hole at 6:42?
@paulstoolbox
Hey Jess, I grab the two sides like in the video. I will wiggle it sometimes to loosen it up a little bit if it is stuck and try to pull it straight out. if that doesn’t work, you can spray some WD-40 or other type of lubricant from the back window into the spot where that Gromit is, you can see it from my video and picture where it is. Sometimes that will loosen it up because the plastic gets dirty and old and sometimes sticks. It always comes out though. Have a great weekend, my friend!
Lady owner of a 2014 Laramie 1500… have to change the whole assembly because the turn signal is out.
Is there a way to fix just the turn signal in the existing assembly, or do I need to just swap in new please? I have a soldering iron if needed.
Would really appreciate it! Ty!
Your local AutoZone or auto parts store should be able to order a pigtail for your truck to replace it. You can also Google front or rear blinker pigtail for your 2014 Laramie. I have purchased them in the past for other vehicles, so I think you should be able to find one fairly easily. I hope this helps and good luck.!
Great video. 3:42:13
3:43:12 good job and content.
2min and 50
2.48.33
Looking for some headlights for my '15 🐏!! Got condensation in driver side factory and it's annoying as hell!!!
Be nice for a product update on that next video......
Hi Duane, if you take your headlight out and blow dry it, I sometimes take a sock with rice and put it in the hole of the lens and let it sit for a while, a day or so. Take clear silicone and run it along the entire seem of the backside. That usually does it. I have never had that problem with Spyder lights that’s why I went to them after I had to fix other ones. I will see that Spyder does not give you very good instructions at all but as far as the quality of the lights I am very happy. I have a follow up video on how to easily fix lights when your lights burn out often. I see this a lot of times when people replace the headlights or the bulbs. If you have any questions please send them to Paul’s toolbox.com, I will do my best to answer. Thanks!
Paul 3 minutes 3 seconds. Is there anything you can’t do? Good video.
Hi Joe theres a lot I can't do, just ask my wife LOL.... It's always good to hear from you . Have a great day!
Thanks you
If you 2x the speed it helps a lot 😉
❤ Great 👍 video
Congratulations. This is the 999,999th video about this.
Thanks, do I win anything?
Paul, I'm going to go with 3.45.67 just to make it interesting.
Hey Paul! What do you suggest to use as a sealant to stop any moisture from getting in and how would you use it?
You'd think that they would build them to be water tight, wouldn't you?
But my OEM lights leaked and filled up with water. Well, not full, but a lot of water. I dried them and sealed them around the edge with silicone caulk.
It probably wouldn't hurt to caulk the new ones to prevent them from leaking in the future.
I'm replacing my original faded lights now and that's what I plan on doing.
Gracias!!!
I have one I need to change