A Crosscut Sled for Your Miter Saw // Woodworking

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 48

  • @wolfgollnitz899
    @wolfgollnitz899 3 ปีที่แล้ว +2

    Best mitre saw addition I have ever seen on YT.

  • @EricSorensenCanada
    @EricSorensenCanada  3 ปีที่แล้ว +8

    Hello Friends! Hopefully you read comments before making one. A few points on this: 1. It gives you more stability when cutting shorter material. This is because the miter saw only has a narrow platform at the front. When cutting shorter boards, things get a bit tippy. 2. It produces a cleaner cut. This is because of the table top and the zero clearance. Yes, you can get the same with a small kerf insert ( tape or whatever ), but then you're missing the stability of the table top. 3. I'm sharing this with you because this is what works in my little shop, and I don't have space for a giant miter saw station that takes up an entire wall. I figured some of you might be in the same boat. 4. The sliding compound miter saw is designed for crosscuts. You should be using it for crosscuts and not the table saw.

  • @johnfisher4910
    @johnfisher4910 3 ปีที่แล้ว +3

    Thanks, Eric! I had no idea about the depth adjustment. Great idea; I'll be doing something similar, soon.

  • @neilf4128
    @neilf4128 3 ปีที่แล้ว +2

    Simple, straight forward and clever. Thank you.

  • @MarriedManWoodworking
    @MarriedManWoodworking 3 ปีที่แล้ว +2

    Nice insert.

  • @ChrisHayes6
    @ChrisHayes6 3 ปีที่แล้ว

    Thanks Eric much appreciated saved me a lot of time

  • @stufarnham
    @stufarnham 3 ปีที่แล้ว +1

    Verycool. This is on my shop project list.

  • @paulwilliams4611
    @paulwilliams4611 3 ปีที่แล้ว +1

    Yes, really good idea, keep them coming, thanks

  • @hwood9783
    @hwood9783 3 ปีที่แล้ว +2

    You have just reinvented the radial arm saw!

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว

      I was hoping you someone would say that🙂. A lot of people don't realize that sliding compound miter saws can do more than just chop. Cheers🍺

  • @patriciamay638
    @patriciamay638 3 ปีที่แล้ว +1

    Thanks for the idea. I need a "jig" to do the small parts for a project i am on and this looks just about right. Not a huge complicated build and something i can lean against the wall when not in use.

  • @sapelesteve
    @sapelesteve 3 ปีที่แล้ว +1

    Terrific idea Eric! That looks like a great cross cut insert! 😉😉👍👍

  • @lornejespersen4774
    @lornejespersen4774 3 ปีที่แล้ว +1

    Very interesting. You could also set up a stop block for repeatability. A hold down could also be used for smaller pieces. Good. Idea. Good video.

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว

      Thanks Lome! Exactly! There are many possible configurations.

  • @andrewhoulihan7940
    @andrewhoulihan7940 3 ปีที่แล้ว +1

    Lovely, lovely design!! Ive saved this video and I’m going to copy your plans. Ive also subscribed to you channel. Keep up the great videos. Love from Ireland 🇮🇪

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว

      Thanks Andrew! Cheers🙂

    • @andrewhoulihan7940
      @andrewhoulihan7940 3 ปีที่แล้ว

      What blade do you have in the miter saw ? Does it cut metal to?

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว +1

      It doesn't cut metal (except aluminum ) Diablo 40 tooth / ten inch: amzn.to/2RqEed4

  • @ChrisHayes6
    @ChrisHayes6 3 ปีที่แล้ว +1

    Very cool idea.. was just about to do extension arms but I like this better.

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว

      Thanks Chris! Cheers🙂.🍺

    • @ChrisHayes6
      @ChrisHayes6 3 ปีที่แล้ว

      @@EricSorensenCanada Most welcome. Keep them coming.

  • @craigoram
    @craigoram 3 ปีที่แล้ว

    This looks great - I'll definitely be doing this soon!

  • @MCsCreations
    @MCsCreations 3 ปีที่แล้ว +1

    Fantastic work, dude! Really nice! 😃
    Stay safe there with your family! 🖖😊

  • @jeeprider9975
    @jeeprider9975 3 ปีที่แล้ว

    Canadians love their Arcteryx....😁😉

  • @flyingscotsman1923
    @flyingscotsman1923 3 ปีที่แล้ว +1

    Thank you Eric. Your videos are reminiscent of Goldilocks & the Three Bears - Their information is Not too much Not too little They are just right. Please continue to call this a Crosscut Sled for the Miter Saw; we love seeing the enraged angry Troll !

  • @ChrisHayes6
    @ChrisHayes6 3 ปีที่แล้ว +1

    Hey Eric can you add a t slot to this?

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว

      Sure you can. Although I would use 3/4" Plywood instead of Melamine in that case.

    • @ChrisHayes6
      @ChrisHayes6 3 ปีที่แล้ว

      Can't you you use t tracks?

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว

      You can cut a dado into 3/4" Melamine and install an aluminium T-track. Cutting T-tracks straight into to melamine like I do with plywood, probably won't work. Because melamine is made up of a particle core, it will crack. Plywood, being laminated layers, is much tougher.

  • @ChrisHayes6
    @ChrisHayes6 3 ปีที่แล้ว

    Hey Eric can you make a jig for circles on a small band saw? Need some ideas

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว +1

      It depends on the diameter of the circle - might not fit on your bandsaw. There are videos on YT for bandsaw circle jigs. Personally, if I need a perfect circle, I use the router on an axis jig. I find it does a cleaner job.

    • @ChrisHayes6
      @ChrisHayes6 3 ปีที่แล้ว +1

      @@EricSorensenCanada all good I use a nail and a 3/4 runner on a board to measure I make the board larger if needed

  • @jriis2010
    @jriis2010 3 ปีที่แล้ว

    Will the plans for this be on your site and are there any special requirements to the miter saw ?

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว

      The dimensions are specific to my mitre saw, so I won't be doing plans. It's just simply a small counter top with a back support. The width goes out about 4 cm / 1.5 inches past the support extensions on either side. The depth is from the back plate to the front, just before the mitre lock in the middle.

  • @usaf4dbt
    @usaf4dbt 3 ปีที่แล้ว

    Thank you! With this insert does saw dust become a problem more than normal?

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว

      I found that the dust collection improved with this new insert. I'm still not sure why, but I think it's because the dust is diverting through the port and not getting blown back to the front like it used to.

  • @Mark-bn7lk
    @Mark-bn7lk 3 ปีที่แล้ว

    Eric, is that a Rigid miter saw stand that your slider was sitting on

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว

      It's an old Ryobi Miter saw stand. I picked it up on sale 12 years ago. They don't make it anymore but you can find a similar design from other 3rd party brands.

  • @rayaldridge2506
    @rayaldridge2506 3 ปีที่แล้ว +2

    Hey Eric, Thank you for sharing this idea and video. I really like your videos. They are all so straight forward and professional. So when when the troll popped in, I had to replay it a couple of times fell out laughing. I loved it! It was a great way to start the video.
    Now for my question. When making the 45 degree cuts should I leave the jig in the original 90 degree cut position and just turn the saw head or should I slide the jig over (right and left) for each 45 degree cut? Thanks again for the video and the laughs 😀.

    • @EricSorensenCanada
      @EricSorensenCanada  3 ปีที่แล้ว +3

      Thanks Ray! For 45°, it is best to remove the insert, set your 45° on your saw and lock it. Then place the insert back in, slide it about 4 inches from the center more or less, then line up your blade and make the cut. Again, make sure the depth stop is engaged so you only cut into the surface about 1/16". Also, pleas check if any screws are in the way before you cut. If they are, simply remove them (assuming your glue has dried and set).

    • @rayaldridge2506
      @rayaldridge2506 3 ปีที่แล้ว

      @@EricSorensenCanada Thank you for your reply.

  • @jeffw8611
    @jeffw8611 3 ปีที่แล้ว +4

    I'm not sure if I enjoy your projects or the angry troll imitations more.

  • @davetaylor2088
    @davetaylor2088 3 ปีที่แล้ว

    Too many trolls and not enough Billy Goats Gruff eh?