I use vaseline for fuel seals or o-rings. petrolatum based lubricant. I use it for fixing turbing engines. I mean motor oil won't hurt but petrolatum is just what I am used to.
I'm anxious to see if you can scale the MAF.. Get to the point where the AFR's are safe and it makes good power. I bought an '05 that I want to swap my sohc hybrid ej257 into, but I want to be able to tune the thing with the factory ECU if possible. Was cool to see that the injector size could be modified and it idled well in your '06
You need a blow off valve bad as well and please go get that thing professionally tuned.. that way they will get ur timing back in sink.. and they can set ur fuel for each cylinder and gear do yourself a favor spend the 100$ and get a good tune on that thing.. they can even put a two step on it..
If you ever have to do any injectors on any car ever again which I'm sure you will take out the fuel pump fuse or relay and run it out of gas then you won't have all that gas coming out of the injectors and the rail. Now your car is going to stink like gas and you're going to stink like gas for the whole day when you didn't have to. I would like to know more about how you get into the ECU on a subaru.very interesting I would like to know more
HEY man getting ready to turbo my 08 hatch... did you replace your stock front o2 sensor with the aem wideband? if not where did you place it, was there a bung for it? Thaks!!
Don’t know a good remedy for richer fuel mix except turning up the fuel flows. It could be the fuel pump is stock for your stock injectiors. Know what I mean?? Great stuff gg
Hay there i have a 2007 subaru impreza 2.5i na automatic ... do bad injectors make clicking noise and can it cause the car to run ruff and eventually in my my case die. I checked my battery 🔋 and alternator and there fine, I also replaced all my exhaust gasket but that wasn't it either🤔 i was hoping u might have an idea to what caused my subie to die
FINALLY, been waiting to see you upload subie content for a long time. I know you like the cheaper solutions route but you should either do a very easy rebuild of the cheap parts you get like the turbo or get them tested before you just go blowing up your poor ej
Glad to see more Subie content! Your channel has helped me a lot with other things too but being i have the exact same type of subie this gives me a REALLY good idea as to what i should do and expect when i decide to turbo mine. Only difference will be i will be doing 2.5i heads on an STI block. 😎👍 keep up the great content!
I too have the same car with car injectors and a pump with a nasty all motor tune. It’s a sleeper but it ain’t enough. Definitely need forced induction
@@s14theron about 5 months of daily driving and daily pulls. I was at 8psi before that. I recently updated my tune and once I fix my boost leak at my bov flange I'll be going for 14psi. Should be around 280-290whp with that.
Awesome work man! I have been following this series closely and will definitely continue to do so. I have an 07 NA subie with 4eat which I plan on boosting too. I do have a few questions: Which ecu do you have?I have a JECS ECU, and I've heard that they are pretty much unflashable in every way. Do you know if thats true? If you were to boost a 2.0l, what things would you have to do differently? Any help would be great, thanks for your time in sharing all this info!
Good video! Good content This video serves as a guide / tutorial to modify the map of my Forester. Could you make a complete video of romraider and carberry?
I just started a supercharged build in my 05 impreza outback and was using this video for refrences. Have you adjusted timing at all and if so what adjustments have been made. Scared to pop the engine once i get the pulley spinning on my M62 Supercharger.
Can I open source tune ecu on my 03 Subaru 2.5 outback, it's hard to find this answer other than that I've got everything else for turbo I just don't want to blow it up 🤪
Hey I just bought a 2010 Impreza outback sport 2.5i lol. Anyway, have you dynoed your right, and how well is it holding up for daily driving. I'd love to know how your horsepower has increased as well as mpg and such.
Hey brother, so I have a 2006 Impreza, N/A, and I'm looking to turbo it. Can I use the exhaust header from an wrx with the up pipe? And then heat it up and bend it in to fit? Thanks for your time. I appreciate it and love your videos
Ok i'm pretty much ready with everything to turbo my 03 ej251, I'm getting conflicting reports that my upstream stock 02 is already wideband, is it? you bought the aftermarket wideband afr right? does your ecu read that too? help!!
The stock o2 is wideband but I have heard that they don't sufficiently read afr under boost but that's okay because that's what your primary open loop fueling table is for. I bought the aftermarket aem uego wideband just to have an accurate afr gauge that I can see all the time, it isn't read by the ecu
None. I've got my 02 lgt limited that's turboed. You either need to stay 6psi and use a rrfpr and map clamp or you need to get a speedyefi standalone ecu to tune the car.
@@ghosty500r 10:1 rrfpr voltage clamp and walbro 255lph pump stock injectors. Unless you switch to a standalone ecu you can not use different injectors it will run horribly
@@CuttinChris really i sent vortech an emily they said if im using stock use 8:1 but if i got upgraded injectors use 10:1. btw how much boost you making and how much whp you think you at or have you got it dyno tested?
@@ghosty500r 10:1 at 5psi is 50psi of additional fuel pressure on top of your 45psi base stock fuel pressure. Stock 280cc injectors will fail above 115psi fuel pressure so 6psi on a 10:1 is about the limit. And with that setup stock injectors map clamp and walbro 255 you will make about 184-200whp. Mine made 184whp 210ftlbs at 5psi on a ej255 shortblock so 8.5:1 compression. Right now I am on a standalone speeduino ecu and have 565cc injectors and a vf39 and at 10psi I made about 240whp 274ftlbs. If you are using your stock ecu you can not swap injectors the car wont run worth a damn. Only way to swap injectors in your model and year is with a standalone ecu.
Be careful with those ebay "New Denso" injectors. The quality control is very hit or miss and the spray pattern on many of these ebay injectors are terrible compared to the real thing. I actually had one stick open on my Civic. Made a huge plume of smoke out the tailpipe, killed my cat, and hurt compression on that cylinder (down 15 psi from the other 3)
I use vaseline for fuel seals or o-rings.
petrolatum based lubricant. I use it for fixing turbing engines. I mean motor oil won't hurt but petrolatum is just what I am used to.
Got to love the sound of an Impreza, I miss my 2001 wrx
i have a legacy and it sounds sorta similar
Your matter-of-fact attitude with no claim to be an expert tuner is ''golden''.
So glad it's back I bought a manual 07' Impreza hatch partly because of this channel.
👍 nice
And when the turbo is gonne meet the engine?
This is very helpful, I have a 07 Impreza 2.5i N/A I'm considering a turbo and all of the parts and tuning will work for me as well ☮️
turn up your returnvalve for your gas pump ,it even helps on a n/a car with smaller size injectors !
Stock fuel pressure regulator will be a sealed non adjustable unit
Was so looking forward to this one. Great series!
Dyno tune it please pay that extra get some good results
I'm anxious to see if you can scale the MAF.. Get to the point where the AFR's are safe and it makes good power.
I bought an '05 that I want to swap my sohc hybrid ej257 into, but I want to be able to tune the thing with the factory ECU if possible.
Was cool to see that the injector size could be modified and it idled well in your '06
Badass that you did all this on your own man. Glad to see it’s turning up good. Dope ride
Watched all your vids over the last week , great channel and greetings from the U.K
🇬🇧🇺🇸, I'm building a 1979 TS250M this has helped a lot cheers
You need a blow off valve bad as well and please go get that thing professionally tuned.. that way they will get ur timing back in sink.. and they can set ur fuel for each cylinder and gear do yourself a favor spend the 100$ and get a good tune on that thing.. they can even put a two step on it..
That rain in the background made it so cozy wtf haha
Hahahaha I know right!
Before watching.. This is gonna be gooood!
If you ever have to do any injectors on any car ever again which I'm sure you will take out the fuel pump fuse or relay and run it out of gas then you won't have all that gas coming out of the injectors and the rail. Now your car is going to stink like gas and you're going to stink like gas for the whole day when you didn't have to. I would like to know more about how you get into the ECU on a subaru.very interesting I would like to know more
HEY man getting ready to turbo my 08 hatch... did you replace your stock front o2 sensor with the aem wideband? if not where did you place it, was there a bung for it? Thaks!!
Can't wait for the update
Don’t know a good remedy for richer fuel mix except turning up the fuel flows. It could be the fuel pump is stock for your stock injectiors. Know what I mean?? Great stuff gg
Hay there i have a 2007 subaru impreza 2.5i na automatic ... do bad injectors make clicking noise and can it cause the car to run ruff and eventually in my my case die. I checked my battery 🔋 and alternator and there fine, I also replaced all my exhaust gasket but that wasn't it either🤔 i was hoping u might have an idea to what caused my subie to die
i have a 2.5i running a td04 and a forester intercooler, would it be safe to use your tuning tables?
Where do you get tunes for other cars?. I only have my original tune from my ECU.
Where can I get a dongle that works with my 2014 impreza wrx
Do I need a spear adjustment tuner to make the injector work?
FINALLY, been waiting to see you upload subie content for a long time. I know you like the cheaper solutions route but you should either do a very easy rebuild of the cheap parts you get like the turbo or get them tested before you just go blowing up your poor ej
Glad to see more Subie content! Your channel has helped me a lot with other things too but being i have the exact same type of subie this gives me a REALLY good idea as to what i should do and expect when i decide to turbo mine. Only difference will be i will be doing 2.5i heads on an STI block. 😎👍 keep up the great content!
I too have the same car with car injectors and a pump with a nasty all motor tune. It’s a sleeper but it ain’t enough. Definitely need forced induction
Welcome to the 565cc club! 10psi is getting me 240whp 274ftlbs!
how long have you been running 10 psi?
@@s14theron about 5 months of daily driving and daily pulls. I was at 8psi before that. I recently updated my tune and once I fix my boost leak at my bov flange I'll be going for 14psi. Should be around 280-290whp with that.
we literally have the same car, Although mine is a 2006 Impreza Sedan
Awesome work man! I have been following this series closely and will definitely continue to do so. I have an 07 NA subie with 4eat which I plan on boosting too. I do have a few questions:
Which ecu do you have?I have a JECS ECU, and I've heard that they are pretty much unflashable in every way. Do you know if thats true?
If you were to boost a 2.0l, what things would you have to do differently?
Any help would be great, thanks for your time in sharing all this info!
i love watching the vids but what's up with the outback badge
Good video! Good content
This video serves as a guide / tutorial to modify the map of my Forester.
Could you make a complete video of romraider and carberry?
How much power u expecting to make 🤔🤔🤔
Damnn a fine subie
I just started a supercharged build in my 05 impreza outback and was using this video for refrences. Have you adjusted timing at all and if so what adjustments have been made. Scared to pop the engine once i get the pulley spinning on my M62 Supercharger.
Dumb question... how did you get the 2007 rom image? I am new to using Romraider.
Can I open source tune ecu on my 03 Subaru 2.5 outback, it's hard to find this answer other than that I've got everything else for turbo I just don't want to blow it up 🤪
why dont work on my 2008 impreza 2.5i? keep saying inteface close helpppp @goldguy
Hey I just bought a 2010 Impreza outback sport 2.5i lol. Anyway, have you dynoed your right, and how well is it holding up for daily driving. I'd love to know how your horsepower has increased as well as mpg and such.
hey, do anything to your car? bought a 2008 impreza outback sport a few months back and looking forward to some mods on it
Hey brother, so I have a 2006 Impreza, N/A, and I'm looking to turbo it. Can I use the exhaust header from an wrx with the up pipe? And then heat it up and bend it in to fit? Thanks for your time. I appreciate it and love your videos
What size? And do you know what size this is?
How's the fuel consumption compared to the N/A?
6:43 same thing p diddy said 😂😂😂
Fkin ay man
It is actually hear that it runs better.
nice car i love your channel
Thanks so much man!
How did u get your vag com cable to connect with ur car ecu
what's the tool kit you have? i need that.
Sounds like it’s got piston slack
Ok i'm pretty much ready with everything to turbo my 03 ej251, I'm getting conflicting reports that my upstream stock 02 is already wideband, is it? you bought the aftermarket wideband afr right? does your ecu read that too? help!!
The stock o2 is wideband but I have heard that they don't sufficiently read afr under boost but that's okay because that's what your primary open loop fueling table is for. I bought the aftermarket aem uego wideband just to have an accurate afr gauge that I can see all the time, it isn't read by the ecu
How much hp you get now??
Do you have a Facebook or Instagram where I can see good pictures of the turbo setup ect?
his instagram is goldguy
How much boost u run
Yes!
hurts to see you destroy the dash.
you need a better ecu, the program you are using is quite limited. but good job man
Haha finally!!! Thanks mate
I have a non turbo Impreza. How much would it be to install a turbo lol I just want the boost noise honestly
If you are paying someone for the labor….. Sell you car and buy a turbo model.
treat yourself with some rims my bro
You are better off with stock wheels over the shit ass wheels most people buy and bend the first week.
Been waiting for the tuning episodes and been watching to ask what rom can i use for my 2001 Subaru legacy gt limited
None. I've got my 02 lgt limited that's turboed. You either need to stay 6psi and use a rrfpr and map clamp or you need to get a speedyefi standalone ecu to tune the car.
@@OTBspeed6 i got a 10:1 fmu wrx injectors and a voltage clamp, i just wanted to know before i did all the extra work. what did you use if i may ask.
@@ghosty500r 10:1 rrfpr voltage clamp and walbro 255lph pump stock injectors. Unless you switch to a standalone ecu you can not use different injectors it will run horribly
@@CuttinChris really i sent vortech an emily they said if im using stock use 8:1 but if i got upgraded injectors use 10:1. btw how much boost you making and how much whp you think you at or have you got it dyno tested?
@@ghosty500r 10:1 at 5psi is 50psi of additional fuel pressure on top of your 45psi base stock fuel pressure. Stock 280cc injectors will fail above 115psi fuel pressure so 6psi on a 10:1 is about the limit. And with that setup stock injectors map clamp and walbro 255 you will make about 184-200whp. Mine made 184whp 210ftlbs at 5psi on a ej255 shortblock so 8.5:1 compression. Right now I am on a standalone speeduino ecu and have 565cc injectors and a vf39 and at 10psi I made about 240whp 274ftlbs. If you are using your stock ecu you can not swap injectors the car wont run worth a damn. Only way to swap injectors in your model and year is with a standalone ecu.
You should really get those flow tested, a good Quality injector is way more then 45 dollars
Shouldn’t there be a vacuum hose on the end of the bov? Should do a vacuum leak test that could be part of the lean issue
Just hit up a awd dyno and get it tuned
remove maf tune on map sensor
Sweet.... keep it up!
Those are not denso
i would love to turbo my NA subie
Is it AWD or FWD
@@opiumCARTI00 AWD hahah always bro
@@billdawgtv2348 i wish i can get one with AWD
In my country there rare , expensive (yes the WRX NOT THE STI )
and the STI will cost you a fortune
Qais Mousa really I didn’t even know they made them in fwd I’m from Australia and I’m pretty sure all the Subaru’s here are awd
Qais Mousa wrx are pretty common around here though sti are a bit more rare but I see them around sometimes
its sad how your vids which aren't about motorcycles get so little views...
U need a 255 fuel pump
nice suby!!
Be careful with those ebay "New Denso" injectors. The quality control is very hit or miss and the spray pattern on many of these ebay injectors are terrible compared to the real thing.
I actually had one stick open on my Civic. Made a huge plume of smoke out the tailpipe, killed my cat, and hurt compression on that cylinder (down 15 psi from the other 3)
🇫🇮
Suomi perkele
Poor subaru 🤣
no shame in using ebay parts man, your engine is worth only like $350 at a junkyard, no reason to spend so much on it like with a stock turbo EJ
Dude paint the intake manifold wrinkle red
Please make a different channel for this. I'm only interested in motorcycles.
Keyword "I'm". WE want this sorta stuff on this channel too!
Please fuck off and wait for another motorcycle video. Entitled dbag lol
Bikes are for donors.