You are the MAN! I type my vehicle, and the model number of the remote start into the TH-cam search bar, and you pop up with all the answers! Thank you!
This may be a dumb question but do you need to program the key FOBs to work ? And will the old original key FOB also still lock and unlock. Thx and sorry for dumb questions:)
I also tried to buy that unit ur using in the video and they sent me a 925s unit and I'm trying to install it tomorrow on my 99 jeep grand Cherokee limited...everything looks the same besides one color wire difference
My 2014 limited Cherokee does not have remote start. Please let me know how can I get this function. In an original way or a plow and play system? Is it possible to code a new remote control with the remote start option?
This is so helpful! Although I want to make sure I have the complete knowledge on how to get it done right. I would like to see all the resources that you refer to but is there any other links other than Facebook ones for those that are not on Facebook?
@@KSuspension it's been broke since I've bought it(6 months ago)... and I have to use the key to unlock the door and some random times the alarm goes off... thanks for the fast respond and now I need to find a video on how to remove the old alarm.... thanks again and happy jeepin
@@KSuspension ok thanks I thought so but didn’t want to assume and learn the hard way I was wrong lol,I assume the negative for the same wire I can just ground to the body?
Hi, so I checked the website the12volt.com, for the 2006 grand Cherokee it says it needs some relays to install the compustar remote starter? Coz I saw this video I thought it's just the same like what you did on your car. Thanks
is the relay strictly for the unlock and lock? I have a 91 xj and bought the relay but am very confused on how to wire it up. Do you have any knowledge on it?
yup, it's to reverse your polarity for your door locks. it should have a diagram that came with it, just follow the wire digram and you'll be fine, shoot us an email if you're still confused. suspensionlifts@gmail.com
@@KSuspension appreciate it man! Got it done a couple hours ago. Had no clue how to wire up those relays and am still new to electrical work but some guys in my jeep group helped me out big time!
Talk about bad timing for me! Last fall I replaced my door lock remote brain above the cabin lights because it stopped working a couple years ago, HA. Since my dash is still open from doing the light bar install, guess I have no choice but to put some more money in, right. LOL Besides always wanted remote start on my girl. That heated mirrors and cruise control, yeah like I'm cruising anywhere at 12MPG. Thanks for another great video. Oh still haven't installed your injectors and wire kit. Soon, spring/summer projects and the list is $k's long. PS: You mentioned when I talked to you? that you would be coming out with a winch wiring set for a front and rear connect. How's that going? Again thanks for your videos. 🤙🏻
@@KSuspension I am a big fan of your products, so much so I have your company sticker on my baby, HA. Would like to buy your winch wiring front and rear as a set. I just emailed my contact info. 🤙🏻
I have a 96 Jeep 4.0 SE (as base model as they can get) I do not have power door locks is there a work around? I always keep my doors and trunk locked after use so I’m not worried about that aspect.
So I bought the same auto start you have for my 98 xj and the 12 volt diagram says I'm Suppose to have a white/red wire for my constant 12 (which there is none) so I used the red and pink wire you exposed in the bundle in the video and got no power. Does the constant 12 volt I tap into have to be at the steering column? I've seen two other videos that did it that way but for different xj years than mine. I know sometimes jeep used different screws, wires, and bolts on certain models to use up the remaining parts.
I'm sorry you had trouble. I'd recommend contacting an audio shop near you, they should be able to assist in the installation. Hope you get it working!
@@KSuspension hey buddy just finished my install but when into anti theft mode it started right up but it will stall and the key icon will stay flashing .😔😢
@@KSuspensionhi ksuspension do you have a wiring diagram for how to do the relay? And do I need to do it for both the lock and unlock? 1989 Cherokee xj Laredo w keyless entry factory
You are the MAN! I type my vehicle, and the model number of the remote start into the TH-cam search bar, and you pop up with all the answers! Thank you!
Best install video, hands down. Thx bud!
By far this is the easiest explanation of installing the RS for my XJ. Tks for sharing,man..
Love the videos and I just recently bought a high output alternator from your website. Can you make an install video?
Funny story, we did, went to edit it, found that we never turned the mic on 😂😂
So we’ll be doing another as soon as a Jeep is ready
This may be a dumb question but do you need to program the key FOBs to work ? And will the old original key FOB also still lock and unlock.
Thx and sorry for dumb questions:)
You program the fobs the unit comes with
Your original will still work, but won’t me necessary any longer
Is there a model you recommend now that this is no longer available to buy? 2000 xj
The 920S proceeds this model
I also tried to buy that unit ur using in the video and they sent me a 925s unit and I'm trying to install it tomorrow on my 99 jeep grand Cherokee limited...everything looks the same besides one color wire difference
It’s the superseded version. You’ll be fine
My 2014 limited Cherokee does not have remote start. Please let me know how can I get this function. In an original way or a plow and play system? Is it possible to code a new remote control with the remote start option?
Visit 12voltsolutions . Com and they’ll prob have what you need
Thank you for so much information.
This is so helpful! Although I want to make sure I have the complete knowledge on how to get it done right. I would like to see all the resources that you refer to but is there any other links other than Facebook ones for those that are not on Facebook?
the12volt.com is all you'll need
@@KSuspension Thank you!
If I understand correctly you only need the key near the module right? You don’t have to buy a whole immobilizer as long as you can hide the key close
If you don’t want to get a bypass module, correct
@@KSuspension Awesome, hopefully this helps out everyone else. I see a lot of people get stuck there in comments
Looking for compustar 925s install on 2004 grand cherokee
Give us a call tomorrow and we can get you scheduled for install!
Will this system work on a 1993 jeep grand Cherokee Laredo? With that 451M harness you mentioned..
Not sure, haven't done a ZJ yet, check with the12volt.com for your wiring instructions and go from there
How has this unit held up?
works great! still installing them to this day
Did you do anything to the original alarm or wire that in and start using the key fab...
This XJ didn’t have an original alarm.
@@KSuspension do I need to remove the old alarm or pull a fuse or the black ring around the ignition...
@@Seatown12s if it’s not working, trash it
@@KSuspension it's been broke since I've bought it(6 months ago)... and I have to use the key to unlock the door and some random times the alarm goes off... thanks for the fast respond and now I need to find a video on how to remove the old alarm.... thanks again and happy jeepin
I’m installing cm900s from compustart, wtf do I connect the trigger starter input to?
Yellow starter wire
@@KSuspension ok thanks I thought so but didn’t want to assume and learn the hard way I was wrong lol,I assume the negative for the same wire I can just ground to the body?
Hey raffi. Does the newer cs920 accomplish the same task?
Yes!
Amazon is sold out of this alarm model. Do you know what other one would fit? And would be just as easy to install ?
the 920S is the updated model.
How’s it going man quick question how much time dose the installation take?
For us? about an hour
Hey I picked up this system for my XJ, can you tell me which wires actually have to get hooked up?
follow directions on the12volt.com and connect whatever options you want :-)
@@KSuspension will this one fit on my 2000 grand Cherokee Laredo BANVIE 2 Way Car Security Alarm System (with Remote Starter)
Can this be done on a 93 jeep cherokee?
Absolutely!
I’ve done it on a Honda generator lol
If it has a battery, and an engine, and a starter, it can be done!
Does it work on 2006 grand Cherokee? Is it the same wiring diagram? Thanks
Check out the12volt.com for your wiring needs
Hi, so I checked the website the12volt.com, for the 2006 grand Cherokee it says it needs some relays to install the compustar remote starter? Coz I saw this video I thought it's just the same like what you did on your car. Thanks
U think that work on my 1992 xj cherokee?
I know it will
Thanks buddy
Would it be safe to assume it would be similar to install on a 97 ZJ Limited 5.2?
Same process
@@KSuspension Nice. Thank you
So my XJ is a 99 SE with manual windows and locks. What wires can I do without if I just want the remote start function?
Follow the diagram on the12volt.com for your needs!
is the relay strictly for the unlock and lock? I have a 91 xj and bought the relay but am very confused on how to wire it up. Do you have any knowledge on it?
yup, it's to reverse your polarity for your door locks. it should have a diagram that came with it, just follow the wire digram and you'll be fine, shoot us an email if you're still confused. suspensionlifts@gmail.com
@@KSuspension appreciate it man! Got it done a couple hours ago. Had no clue how to wire up those relays and am still new to electrical work but some guys in my jeep group helped me out big time!
@@jakeliley7944hey man can you please send me a link or lmk how you wired this @ksuspension
Will this bypass factory alarm?
Talk about bad timing for me! Last fall I replaced my door lock remote brain above the cabin lights because it stopped working a couple years ago, HA. Since my dash is still open from doing the light bar install, guess I have no choice but to put some more money in, right. LOL Besides always wanted remote start on my girl. That heated mirrors and cruise control, yeah like I'm cruising anywhere at 12MPG. Thanks for another great video. Oh still haven't installed your injectors and wire kit. Soon, spring/summer projects and the list is $k's long.
PS: You mentioned when I talked to you? that you would be coming out with a winch wiring set for a front and rear connect. How's that going? Again thanks for your videos. 🤙🏻
We have the front. Rear should be done soon :-)
@@KSuspension I am a big fan of your products, so much so I have your company sticker on my baby, HA. Would like to buy your winch wiring front and rear as a set. I just emailed my contact info. 🤙🏻
Will this work on any vehicle because I have a 92 Jeep Cherokee... I just didn't know if it work or not.
Yup, just need that relay that’s described in the video!
I have a 96 Jeep 4.0 SE (as base model as they can get) I do not have power door locks is there a work around? I always keep my doors and trunk locked after use so I’m not worried about that aspect.
just don't hook up the wires for the locks.
Would I still need that special relay mentioned?
@@nomame7413 no
KSuspension Awesome and thank you for the help!
So I bought the same auto start you have for my 98 xj and the 12 volt diagram says I'm Suppose to have a white/red wire for my constant 12 (which there is none) so I used the red and pink wire you exposed in the bundle in the video and got no power. Does the constant 12 volt I tap into have to be at the steering column? I've seen two other videos that did it that way but for different xj years than mine. I know sometimes jeep used different screws, wires, and bolts on certain models to use up the remaining parts.
doesn't have to be in that loom, but it's the easiest source, you should have a red/white wire or a solid red wire with constant 12v
Do you know what current model would work for an 01 XJ as the cs800s seems to have been discontinued??
Thanks for sharing that info! We’ll have to look and see what we can use now. Running low on the shelf with the 800’s
But i tried with my jeep Cherokee xj model 2001 auto transmutation three times but i didn’t make it!!
I'm sorry you had trouble. I'd recommend contacting an audio shop near you, they should be able to assist in the installation. Hope you get it working!
I have jeep cherooke classic model 2001,auto transmission ..
Does it work with it?
@@ibrajuhani6572 yup!
Does the work normally on the manuals too?
Comment to and old post...
If you bypass the clutch pin and your manual is in gear, the vehicle will attempt to drive away on its own.
Hey Man, would you happen to know if it’ll work on a 2000 grand Cherokee power locks etc
It’ll work
Is a bypass required because it has a chip key?
OJ simpson Simpson yes it’ll need one. Check out the12volt.com for wiring and install needs
What do I do about the hood pin?
What hood pin?
Will this work for a 2001 jeep grand Cherokee limited v8 4x4?
yup
For the door lock relay, is there anything I need to do with that besides plug it into the box?
Did you ever figure it out?
Mine keeps shutting off and turning back on after like a minute or 2, any ideas?
Shout out to jeep joe
How does this compare to the cs920s?
From the looks of it, the 920S comes with a bypass module.
The hood pin came with the auto start
Good video. 👍but there was a lot of wires
There is a lot of wires, yes. However it’s super simple.
Don’t get discouraged, you’ll be done pretty quick
@@KSuspension hey buddy just finished my install but when into anti theft mode it started right up but it will stall and the key icon will stay flashing .😔😢
Machine Addictive digging need to get a security bypass module if you have the grey chipped key.
@@KSuspension it's that connects to the pcm
Machine Addictive digging no, it’s a bypass module you wire into the brain of the remote starter. The12volt should show you what you’ll need
Will this work on a 92 XJ , I do have keyless entry on it
Indeed! just make sure to get the relay for the reverse polarity signal for the door locks
@@KSuspensionhi ksuspension do you have a wiring diagram for how to do the relay? And do I need to do it for both the lock and unlock? 1989 Cherokee xj Laredo w keyless entry factory
@@abrahambarkhordar5572 the relay should come with multiple options for wiring, with pictures on the sheet. I don't have one on hand At the moment.