Incredible result. I find it so inspiring how you kept driving while not sure it would work out. I personally struggle with that. In the end, your sequence of operations appear to have been perfect. Super nice 👍 ...... Joel
Thanks Joel! I really didn’t think the first one would turn out good no figures it would be a test piece. Sometimes it’s better to be lucky then good. Haha
Getting close to getting that bad boy on the road, great work and glad to see all the hype about the the virus isn't slowing you down keep up the fine work.
Thanks for showing the creative process in making new pieces. I like how you tie it in to the existing lines on the truck. Looks like it belongs there. Keep it up, brother!
Turned out trick. Looks Factree ! I have a suggestion if your interested ? Make an aluminum tube to go under the shield so the big hose could be cut way down and not detract from the look of your nice fab work. Especially at the drivers side filler neck, where the stock hose kicks way out. It would be well hidden and it would also help disappate additional heat and help avoid hot heat hose collapse. Just a thought ??
The hose don’t bother me to bad, I think if I change anything there I’ll swap a 2010 canary water pump on. It exits to the from and driver side. The would land me a fresh water pump and clean it up some.
Looks good. Have you had any issues with that upper radiator hose sagging? This shroud would make a good platform to hang a hose hanger from if necessary.
Man this thing is lookin killer! I can't wait for corona season to end so I can see some car shows maybe even run into this thing runnin around shawnee!
Hey Puddin your professional. Heck fire now if that piece I just seen you fix to go over the radiator. If it was crome you could sale the heck out of those. Your freaking good 👍
Puddin: I'm not a sheet metal guy, I don't like it. Puddin after doing said sheet metal work: puts out badass professional looking sheet metal pieces! 😂👋👋
You seem like me when I’m involved with a build it keeps me up at night thinking about the next idea. Or how I can change something to make it better my wife says I worry more about my truck the her or work
I looked up sheet metal guy in the dictionary & they had your picture. Nice job :)
That’s damn sure a lie! Lol
For someone who claims you're not a sheetmetal guy, you're are killing it! Thanks for the motivation!
Thanks for watching!
Damn the attention to detail, that turned out really good!! Working my way though every video you got!!
Thanks!
Pretty dam good for someone that don't do metal work.
Always learning!
Killer work Jacob. Loving seeing Benson's shirt as well!
His shirt is awesome.
Incredible result. I find it so inspiring how you kept driving while not sure it would work out. I personally struggle with that. In the end, your sequence of operations appear to have been perfect. Super nice 👍 ...... Joel
Thanks Joel! I really didn’t think the first one would turn out good no figures it would be a test piece. Sometimes it’s better to be lucky then good. Haha
A professional is someone who knows how to fix their own mistakes. By that definition, you certainly qualify as a professional.
That was definitely a lucky learning experience lol I did fix it but wasn’t actually sure how to, I just tried things!
You should never worry about what people say about your work! As long as you like it then it's fine!!
Looks perfect, You have been blessed with some great skills. Watching and learning from you is making me want to start a project!
Do it!
Been binge watching for a couple days on my breaks. I’m thoroughly enjoying these videos. I like the home shop style feel of your channel.
Shroud turned out awesome!! Nicely done!!
Thank you!
Way to just do it! Turned out super cool!
I’m pretty happy with it!
You can't be a sheet metal guy! You're not bleeding! Beautiful job on the shroud. You made it look easy
Just trying stuff until it works!
That cover looks fantastic. Excellent work!
Getting close to getting that bad boy on the road, great work and glad to see all the hype about the the virus isn't slowing you down
keep up the fine work.
What virus? Lol
Great recovery from mistakes! Looks like everything was planned that way. Nice job and totally bitchen.
👊🏻👊🏻👊🏻
Outstanding fabrication! Blessings.
Ha, great channel. Your sheet metal work is cool. Keep it coming, keeps me getting off my ass on my project. From NZ
Thanks! Keep getting after it!
Very nice job. Really clean design and smooth lines. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep making. God bless.
Looks great! I've noticed the International in some of your current videos and wondered what the story was. Awesome job from start to finish.
Need a shroud for my 74 f100. Love this idea. Definitely gonna try my hand at something. Keep up the good work. Love the channel
Enjoy your videos. Appreciate your attitude.
Thanks for watching!
That came out awesome you did really good job thank you
You keep saying your not a sheet metal guy, yet you keep making tons of awesome sheet metal.
For not being a sheet metal guy it like you have the right tools , good job !
Some of them!
Digg it...I'm going to try to make one or two :) Thanks for the inspiration and info
Thanks for watching!
For not being a sheet metal guy....you're a pretty good sheet metal guy 👍👍👍👍
I’m learning some!
Another fine bit of workmanship!
Thanks!
Great work as usual, all the best from the UK
Thanks for showing the creative process in making new pieces. I like how you tie it in to the existing lines on the truck. Looks like it belongs there. Keep it up, brother!
Thanks tall guy!
That turned out sweet. The haters are going to hate. Just scroll on by and don't let it get to you.. Another great video 👍👍🇨🇱
Thank you! They don’t bother me lol
Great job! Really looks nice.
Always turning out nice work!
Turned out trick. Looks Factree ! I have a suggestion if your interested ? Make an aluminum tube to go under the shield so the big hose could be cut way down and not detract from the look of your nice fab work. Especially at the drivers side filler neck, where the stock hose kicks way out. It would be well hidden and it would also help disappate additional heat and help avoid hot heat hose collapse. Just a thought ??
The hose don’t bother me to bad, I think if I change anything there I’ll swap a 2010 canary water pump on. It exits to the from and driver side. The would land me a fresh water pump and clean it up some.
Those bends on the radiator cover came out great
Thanks!
For not knowing how to do the sheet metal work, you did really nice job blending that raised are around the hood latch.
EDNA is shaping up to be a beautiful vehicle.
She is!
Looks good. Have you had any issues with that upper radiator hose sagging? This shroud would make a good platform to hang a hose hanger from if necessary.
I have not.
@@PuddinsFabShop Sweet! Cool build. I have been binge watching from the beginning.
The haters that are picking at what you have been doing must not see what I see it's looking awesome bro
And what it looks like today I'm sure there's nothing that has been said now lol
You say you’re not a sheet metal guy, but you do a damn good job at it👍
Clean up nicely 👍
👊🏻👊🏻
Looks great man.
Thanks77!
I love your approach. All too often I’ll choose the more complicated pathway. What gauge sheet metal is this? Thanks
Man this thing is lookin killer! I can't wait for corona season to end so I can see some car shows maybe even run into this thing runnin around shawnee!
It will be out and about for sure!
Hey Puddin your professional. Heck fire now if that piece I just seen you fix to go over the radiator. If it was crome you could sale the heck out of those. Your freaking good 👍
Puddin: I'm not a sheet metal guy, I don't like it.
Puddin after doing said sheet metal work: puts out badass professional looking sheet metal pieces! 😂👋👋
Awesome Job!!!!
Thank you!
very nice Love the design
You need to get, PFS crown shirts. Awesome looking.
Your doing a great job keep it up all the complainers are the ones that don’t get off there ass to do anything later. Kozbilt
Thank you sir!
That looks awesome
Fantastic fabrication work, looks stock.
That’s the goal!
Turned out good
Nice work.
👊🏻👊🏻thanks!
It’s the best custom mod when it looks like it’s original
Nice job man. Are you going to sheet metal the inner fenders to match your nicely done (non sheet metal guy) radiator cover?
They do match. I think lol.
Another great addition brother! What size are your step dies you are using?
They are the baileigh industrial 45 degree step dies.
Looks awesome brother
Thanks!
excellent work
Great look
Love what you do
👍
I hope you and your family are staying healthy
We are!
Looks damn good
Nice!
👍🏻
Awesome 👌
Thank you! 👊🏻👊🏻👊🏻
Looks good
You are so right, you’re no sheet metal man......YOU ARE A SHEET METAL GOD!
I appreciate it but I definitely ain’t that. There’s so many talented metal shapers out there.
O Baby that's Fine!!!!!!!!!!!!!!!!!!!!!!!!!!!
Very nice❤
What electric sheet metal sheer do you use?
I’m not sure the brand. I got them on eBay tho cheap
Man! That is pretty bad a**! You are a lot more talented than you give yourself credit for. 👍🏼
👊🏻👊🏻
🔥🔥🔥
Let's go
I like over complicated, I usually do that on my projects.
You seem like me when I’m involved with a build it keeps me up at night thinking about the next idea. Or how I can change something to make it better my wife says I worry more about my truck the her or work
Ya I’m always thinking what’s next.
Nice job...
Thanks!
That shroud is better than a factory shroud. Great job for not being a sheet metal guy.
👊🏻👊🏻
Looks bad ass
Factory fresh.
Nice
It’s your car do what you want.
Not a sheet metal guy. You a sheet metal guy!
But I’m not lol
Looks Fac tree
That’s the goal.
Oh ya buddy I'm first
👊🏻👊🏻👊🏻Thanks for watching
You look like a sheet metal guy to me.!
I'm just going to start commenting "Bitchin" on every video.
Bitchin
Pretty good for not being a sheet metal guy.
Purty
Hey Puddin. Who told you that you're not a sheet metal man? Just sayin.
Right, not a sheet metal guy, yeah keep saying that
I will! Lol
For somebody who is “not a sheet metal guy” ya’ certainly fake it pretty well.
Fake it til ya make it.
comment
You are a sheet metal guy. Don't listen to yorself.
I’m okay and willing to do it! But I’ve seen great sheet metal guys and I’m not it
👍