Vauxhall/Opel ECU Fault Code P1600 Replace ECU - How to diagnose and fix!

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 พ.ย. 2018
  • This ECU fitted to the Vauxhall/Opel Astra, Zafira and Meriva built between 2003 and 2013 with the Z16XEP engine is a very common failure that causes fault code "P1600 Replace ECU" to be stored, however, this does not mean that your ECU has failed. In most cases it actually means that other components have failed, which we explain in detail on this video.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 15

  • @jasongutteridge
    @jasongutteridge ปีที่แล้ว

    What a handsome gentleman, and very good explanations and demonstrations. He deserves a pay rise.

  • @babyninjaonboard6191
    @babyninjaonboard6191 4 ปีที่แล้ว

    Hi tell is it possible to use the manual ecu in automatic car astra h z18xe?

  • @user-wx3fw8cg7o
    @user-wx3fw8cg7o 4 ปีที่แล้ว +1

    Great explonation! Thanks! Do you provide commercial truck ecu repair?

  • @kevin22325
    @kevin22325 3 ปีที่แล้ว

    opel astra h z16xep 05 ecu mt35 foult code p1550 and p1600
    walk into limp mode when it gets hot when I turn off the engine so sometimes I can not start the car
    and sometimes the light goes out but turns on later
    is the ecu broken or what do you think

  • @lemanslemans1460
    @lemanslemans1460 5 หลายเดือนก่อน

    For MARELLI SISTEM CHERY TIGGO 2/ P1600?

  • @lemanslemans1460
    @lemanslemans1460 5 หลายเดือนก่อน

    FOR CHERY TIGGO 2 MARELLI SISTEM P1600?

  • @cosmincraciun4810
    @cosmincraciun4810 ปีที่แล้ว

    Hello sir,
    Can you help me understand these code errors? I recently got 3 new errors on my opel H Z16XE. 1515; 1450; 1600? I don't understand the meaning. The car works fine, without any problems. (I can say that since I changed the thermostat the water temperature is 100 degrees Celsius, instead of 90 degrees like usually, but the mecanic said that's ok because this is the temperature for this enegine )

  • @davidjohnrobinson2887
    @davidjohnrobinson2887 4 ปีที่แล้ว +1

    Hi. Zafira b 1.6 Engine cranks but no start. No fault codes generated so, nothing to go on. Could it be ECM? Any ideas! Thanks.

    • @sara78130
      @sara78130 4 ปีที่แล้ว +1

      crank sensor

  • @chrissale8802
    @chrissale8802 ปีที่แล้ว

    Hi any help would be really appreciated, Zafira b - 05 car with spanner through light coming on and off when car running, only comes on after doing about 6 miles or so, stays on for about 3 to 4 mins then goes off, then comes back on, taken to Garage, EML On/service light resulting in fan relay 3 malfuntioning, TestFan/Tested Fan 3 & wiring from ECU to relay, ALL FINE, Diagnosis result found poor plug connections, but since then the service light is still doing exactly the same as it did before, any suggestions please.

    • @Ecutestinglimited
      @Ecutestinglimited  ปีที่แล้ว

      Hi. Did you get the poor plug connections fixed? Was there any sign of water ingress on the connector or plug or even around the ECU itself?

    • @chrissale8802
      @chrissale8802 ปีที่แล้ว

      @@Ecutestinglimited Yes Garage fixed plug connections and no signs of water ingress, but light is still coming back on after about 6 miles each journey and has continued to do so since got back, seems as though comes on once car has warmed up, back to local garage t/day for another go at it.

  • @yasminmacneil4324
    @yasminmacneil4324 2 ปีที่แล้ว

    What about a 2005 petrol Vauxhall Agila?

    • @Ecutestinglimited
      @Ecutestinglimited  2 ปีที่แล้ว

      Hi. Unfortunately the Agila is fitted with a different engine than the one in the video, so the ECU will be different. Apologies.

  • @lemanslemans1460
    @lemanslemans1460 5 หลายเดือนก่อน

    MARELLI?