i spent the 20 for the fake one, but for a valid reason. 1) ive never owned a balisong and im now getting into them. 2)i heard that the fakes are not that bad and are good fake balisongs if you know what I mean. i dont mind the fact that i dont have the "quality" or real "value" cause frankly i dont really care, i just want to have a balisong that i can keep at home and play around with. im not really trying to show off or impress anyone. i just want a balisong for cheap.
kinda same here, just bought an bst alpha beast fake for 120 bucks cause sharp blades are not legal in my country and I want the best trainer I can get
I picked up a fake 42 at a gun show today. I was obvious handles were a plate design not a cast and it didn't have torque straw pins but it does have the balisong butterfly 42 engraved on it and the bench made us 440c on the opposite. Solid 20$ investment
I noticed the number 42 indicating the model under the butterfly logo on the real 42 is smaller font and further away from the butterfly image, somethings VERY consistent from the fake to, all the fakes I have seen so far has larger closer numbers...
It took you roughly 5 minutes to actually get into the comparison. 10/10 would waste 5 minutes of my life listening to some guy babble on about creativity again.
the fake ones actually are pretty good, I have one and it's amazing, flips very well, I think thanks to these guys making the fake bm 42 a lot of people can at least get pretty close to what it's like having a real one, besides the benchmade guys are kind of jerks for discontinuing what most of the flippers claim to be the best balisong ever made, and even if they start making them again, the price they ask for their knives is insane, so stop whining about the chinese making these clones, I think they're great balis, and what makes them even greater is that they are affordable for most people
@Benjamin Huffman My videos usually require at least an attention span of 5 minutes. I know it's a lot to ask. BTW, you can fast forward youtube videos. Just FYI.
Well then bench made should star making the 42 again and people wont have to purposefully buy working 10 dollar fakes cause the real ones are still 400
Benchmade 42 handles are made of cast titanium and total weight of 4.1 oz(116.2 gm). Titanium is non magnetic, weighs around 40% less than steel. (geek specs: specific gravity Ti 4.5 gm/cc vs Fe 7.8 gm/cc) In other words the stainless steel fake will weigh more. Since the genuine handles are cast no milling marks, should you see milling marks around the holes then request a lower fake price. The color of Titanium tends to be darker grey vs the silvery bright stainless steel. You can see the subtle color difference at 7:01. Also the stainless steel fakes will be thinner to reduce weight. Hope this helps.
theyre made out of cheap metal like he says in the video after a couple weeks theyll fall apart and usually the screws strip easily you would be buying a saftey hazard, just bad shit waiting to happen
Kenneth Kourt The value going up on a product due to supply and demand is theivery? So I guess when the price of gold went up that was theivery. Or when stocks increase in value that is as well? You really can't decipher between someone making a knock off product and something going up in value due to increased demand?
#knifezoid, do you really think that I'd give up on Benchmade, the name that made me love the knife, so easily? What knife have you owned that came close? Benchmade closed their doors to me. I found a way to get close again. So here's the real deal: Benchmade is not making the 42 EVER again. People want to charge me imaginary prices for a knife I owned. Will I pay super--reasonable prices for a near-match, after spending countless dollars buying shitty knives? YEAH. FUCK YEAH.
Lots of theories but no solid answer. The most common one I heard is the mold and Tooling for the handles was running towards the end of life and they decided not to redo them. Manufacturering Tooling is very expensive.
I just bought a t4 titanium bm42 fake. Still waiting on it, but I would like to say its stupid to be so anti-fake knives. People want the bm42, and benchmade could make them, but they don't. Instead they make shitty, heavy, overpriced new stainless steel models, that don't even have a spring latch. The fakes are SO similar. They flip almost identically, and are a tenth of the price. Fuck benchmade, (but fuck exiled cuterly too). I have no problem with the chinese fakes, and I don't think most people that want a good flipper for a good price do either.
+biteme I got mine off DhGate. flipped it as my main until I got my replicant, but when I did it was Hella nice.. came shaper then the REP... as in literally hair popping razor sharp. I loctited mine, tolerances were tight, flipped amazing, well worth the 80 I spent on it. love the sound of the Ti too. still flip it almost every day, not a single issue with it
for me, the fake one was the best option, i live in Brazil and here an BM 42 cost aprox. R$1400 and i dont want and dont have this money to spent on a Knive.
You're fine, get the cheap fake one, save your money. Most damages you can fix yourself, and if it breaks completely, just buy another one for 20 bucks... You can get 50 fake ones that would be good enough for a lifetime before you could ever get a real one.
The main differences that I could see that weren't mentioned were: The tang pin on the real 42 looked smaller and neater, it seemed quite large in comparison on the fake. Also the grooves in the kicker of the fake were much deeper and more pronounced than in the real one. Lastly, the number 42 itself on the blade was much smaller, neater, and further from the logo on the real deal. With that being said, unfortunately, the 42 has been discontinued. This means that small changes to the design to throw off counterfeits will no longer occur and replicas will get even harder to distinguish as their design improves.
I agree with alot of what you say however consider the following 1# chinese consider it to be an honor to be able to copy high quality items 2# its not hurting benchmade because benchmade stopped making the BM42 and they have stated they have no plans to make it again. so where there is a demand there is a market.
***** The Benchmade 42 is not a $500 knife, it's a $170 knife that costs $500. I would never ever pay MORE than the retail price for a knife. That's why I'll never have a 42. I'd buy another 62 or 51, or an Alpha Beast or Replicant, or any other high quality balisong.
Many of the things you're pointing out are only seeable if you have both a real and a fake side by side, which doesn't really happen in the real world. In reality, you won't have anything to compare the fake to.
I have experience with fake ones, and the forst thing i noticed is that the pivot screws are realy bad. I had a fake BM42 and i tightened the screws, and what happend? The broke....
I recognize that knife. In fact, If I'm not mistaken I sold it to you way back in the day. I'm glad you're still enjoying it man. -Cody Mertens (Linett)
Hey man, where you been?! Haha, yes I remember buying from you. You still flip? Get on the Jerzeedevil and Balisong Technique if you're not already there man. Good to hear from you. She is still running strong.
My mom ordered a bench made ballisong for me for Christmas, I was real happy til she started worrying because it wasn't showing up,creep in mind she ordered it on thanksgiving and it still didn't show up, we check her email and it says it's on a boat from China.... I asked her where she ordered it from and she said EBay.... I feel so bad because she payed full price for a bench made and it's a fucking cheap piece of shit. I just hope it doesn't break the day I get it.
clones would not be so prevelent if the origonals cost wasent so outrageous. There is not any where near 400$ worth of materals and machine work in those knives. Now if they were made out of aircraft grade Ti with a Titanium nitride coated blade or somthing similar it would be a different story.
not really when you think about how expensive the metals are and then the process that goes into making them all handmade or not they all have to be absolutley perfect and then of course a big company like that has a lot of overhead they need to pay off so its worth it. plus the markup on retail thing can be up to 75 percent so they are actually profiting not just breaking even. and the stores need to make money to
nsquezada27 thats the thing tho the metals are not that expencive they can be found in plenty of other quality knives of much lower cost. The machine work isint that complex infact its fairly basic. i realize that the company needs to make a proffit but unless they only are making a few hundred of these knives and have to recoup all of the tooling costs and such they shouldent be 300 / 400 dollar knives.
i was thinking about buying a fake benchmade cuz i never heard of someone breaking a fake 42 and i really wanted to know if the qwality of the fake one is good
pliners1 A Flick balisong (www.bladeplay.com/item--Silver-Flick-Butterfly-Knife-Drop--12813) is only 15 dollars but its a great beginners knife but the handles are a bit weak they won't break on ticks but I don't recommend throwing them (personal experiences).
lmao I got one more video on the FU42 coming...a viewer sent me one of the originals which proves some things that were hidden on newer versions, let the drama begin once again, whatever right, its info, info is good...
I just bought a fake one for 11 dollars. Had no idea of the original price though. Also, I didn't know Benchmade was an actual company. The model name is A316 and I don't know if I should feel bad for spending 38 dollars in total for 3 fake knives.
Ehh good video but to be honest, it is about the money issue with em, a few hundred for a benchmade is complete bullshit to me, yeah nice knife but a few hundred bucks FOR A KNIFE? thats a bit much for me tbh, i do have a fake one, its cool and close to the real deal, cause i cant afford a nice real one at the moment, also forget the money, like me we have to buy fake ones cause in the UK theyre illegal other than the trainer, and i dont fancy buying the trainer benchmade for 280dollars
You're paying for the material it's s made of, the manufacturers, the time put into the knife, and the shipping/handling for the delivery, as well as the process itself. Knives are expensive tools. If you buy one, respect it. I could save your life.
How does that have anything to do with being a millennial? He wasn't necessarily wrong, you kinda did ramble a little in the beginning. Also, some people can't afford to pay over 500 dollars for the real thing, despite having jobs. Some people need to pay bills, or pay rent. That's the reason a lot of people buy fakes.
People support local inustries. This industries keep the jobs in you country and keep your economy running! Imagine everything you buy comes from china, what do you think will happen to your community of unemployed people?
Melder92 Okay you don't listen, we can't if we want a 42 we can't have it so basically we're gonna buy it some where we can still got one no matter where it's from neither how it's made
I need help I just got a balisong that looks like a benchmade but I didn't know at the time because I'm new this balisong was my first one and it is like the fake one but it's a rainbow one and it was $9 well $12 with the sheath so did I get ripped off or nah?
At 9:13, the "42" under the butterfly, looks like it was stamped onto the fake, the numbers aren't aligned, and are much closer to the butterfly, than on the real one.
I m not a very smart person, nor do I have any knowledge on knives what so ever. I was just interested in the video cause I saw a balisong in a movie and wanted to know more about it. Just passing a dumb question, would it be possible to tell apart a fake one from a real one by the magnetic properties of the metal used? (one being titanium and the other being cheaper mild steel as said in the video) Again just a dumb question, go easy on me guys.
I just got one and they seem to have updated them. The one i received seems to have handles that are cast in one piece (no soldered in pieces), the tang pins seem to be heat treated better so they do not deform, the logo is etched darker, and the latch cups on the safe handle are now u shaped(instead of a full deep drilled circle) and identicle to a real 42.
+knifezoid thank you I just came across one in a pawn shop near where I live. I believe that it is a real one the man at the shop said that he would sell it to me for $230.00. The knife seems to be in good condition though the blade is rather dull. It also comes with the box and sheath. The box is some what beat up. Also it has papers inside from benchmade explaining the warranty and how you can send in the knife for $5 to have it sharpened. The blade is 440c and the handles are titanium. The spring on the lock is still strong. By the way I love your channel.
How long ago was this fake purchased ? That I am aware of there have been two batches of fakes. Your one appears to be from a new third batch. The latches of the first and second batches have a flat underside your one is domed on both sides. How is the tang pin ? Previous fakes have a very rough tang pin.
The latch seat on the fake is a little thicker on the ends of it while the ends of the seat on the real o e are thinner. A lot of ppl possibly didn't notice that
Another noticeable difference between the real and fake is that titanium has a darker tone to the metal when polished. stainless steel is lighter. if u have a titanium ring or bracelet u can use that as a reference
The logo is faded on every benchmade counterfeit I've come across, and there is always a more rigid indention from the blade going into the bottom of the blade piece.
5:04 to not waste your time
Thank you
Schlomo Kikestein Those 5:04 are mine to keep. You'll never get them back. My ranting has consumed a portion of your life. Woohoo!
Schlomo Kikestein thank you
thank you
Thx dog, May Harambe be with you.
i spent the 20 for the fake one, but for a valid reason. 1) ive never owned a balisong and im now getting into them. 2)i heard that the fakes are not that bad and are good fake balisongs if you know what I mean. i dont mind the fact that i dont have the "quality" or real "value" cause frankly i dont really care, i just want to have a balisong that i can keep at home and play around with. im not really trying to show off or impress anyone. i just want a balisong for cheap.
Exactly
Same here
Parsa Vahdati fake
kinda same here, just bought an bst alpha beast fake for 120 bucks cause sharp blades are not legal in my country and I want the best trainer I can get
@@misterbaker9728 Well hello there
“Thank you, we will make those changes.” - China
I need a order form
I picked up a fake 42 at a gun show today. I was obvious handles were a plate design not a cast and it didn't have torque straw pins but it does have the balisong butterfly 42 engraved on it and the bench made us 440c on the opposite. Solid 20$ investment
I noticed the number 42 indicating the model under the butterfly logo on the real 42 is smaller font and further away from the butterfly image, somethings VERY consistent from the fake to, all the fakes I have seen so far has larger closer numbers...
It took you roughly 5 minutes to actually get into the comparison.
10/10 would waste 5 minutes of my life listening to some guy babble on about creativity again.
You'll never get those 5 minutes back. They are forever mine.
@@knifezoid You are truly evil...
the fake ones actually are pretty good, I have one and it's amazing, flips very well, I think thanks to these guys making the fake bm 42 a lot of people can at least get pretty close to what it's like having a real one, besides the benchmade guys are kind of jerks for discontinuing what most of the flippers claim to be the best balisong ever made, and even if they start making them again, the price they ask for their knives is insane, so stop whining about the chinese making these clones, I think they're great balis, and what makes them even greater is that they are affordable for most people
***** perhaps, but I just use mine for flipping, so I don't care too much about the blade
+serchu taki If benchmade starts producing 42s again, you can bet your ass they will be far above the original $150.
serchu taki you can remove the blade and put a short metal bar in the placea
payed 35 for one of these and i love it regardless
Why
@@sambeijer6970 to castrate simps like u
@@darreylbee tell em soldier 💯 we don't take kindly to simps around here 😤
@Default Name
MEGAKNIFE prolly
@Benjamin Huffman My videos usually require at least an attention span of 5 minutes. I know it's a lot to ask.
BTW, you can fast forward youtube videos. Just FYI.
Well then bench made should star making the 42 again and people wont have to purposefully buy working 10 dollar fakes cause the real ones are still 400
Yeah Nike should lower the price on Jordans to $20 so people don't have to buy fakes. Yeah...
+knifezoid I see in the video that fake balisong doesn't open fully and it hasnt got the logo on the knife.
***** I dont play that much
+knifezoid where did you buy your real Benchmade 42?
My fake came with 3 washers on the bite handle 2 on the safe handle. The tightness is uneven and the knife doesn't move properly
Benchmade 42 handles are made of cast titanium and total weight of 4.1 oz(116.2 gm).
Titanium is non magnetic, weighs around 40% less than steel. (geek specs: specific gravity Ti 4.5 gm/cc vs Fe 7.8 gm/cc) In other words the stainless steel fake will weigh more. Since the genuine handles are cast no milling marks, should you see milling marks around the holes then request a lower fake price. The color of Titanium tends to be darker grey vs the silvery bright stainless steel. You can see the subtle color difference at 7:01. Also the stainless steel fakes will be thinner to reduce weight. Hope this helps.
If they're such a perfect imitation then what purpose does it serve to buy the real one besides being self righteous?
theyre made out of cheap metal like he says in the video after a couple weeks theyll fall apart and usually the screws strip easily you would be buying a saftey hazard, just bad shit waiting to happen
idiot...
what i did was i took out the screws and out actual rivits, 3 years and its still going strong :P
Very good they are identical it's just people are retarded and think that the more expensive version is better for absolutely no reason.
Benchmade has to make money to make more knives
Owned both knives.The clone is SO close to being right. $500 vs $40? Its the best.
Kenneth Kourt Except that you are supporting theivery...
Nope. $500 for an $180 knife is thievery.
Kenneth Kourt The value going up on a product due to supply and demand is theivery? So I guess when the price of gold went up that was theivery. Or when stocks increase in value that is as well?
You really can't decipher between someone making a knock off product and something going up in value due to increased demand?
There is no increased demand without SUPPLY. Buy me a Benchmade 42. I'll give you a week. I spent YEARS trying to buy a knife I used to own.
#knifezoid, do you really think that I'd give up on Benchmade, the name that made me love the knife, so easily? What knife have you owned that came close? Benchmade closed their doors to me. I found a way to get close again. So here's the real deal: Benchmade is not making the 42 EVER again. People want to charge me imaginary prices for a knife I owned. Will I pay super--reasonable prices for a near-match, after spending countless dollars buying shitty knives? YEAH. FUCK YEAH.
Why did BenchMade discontinue the original?
Lots of theories but no solid answer. The most common one I heard is the mold and Tooling for the handles was running towards the end of life and they decided not to redo them. Manufacturering Tooling is very expensive.
I just bought a t4 titanium bm42 fake. Still waiting on it, but I would like to say its stupid to be so anti-fake knives. People want the bm42, and benchmade could make them, but they don't. Instead they make shitty, heavy, overpriced new stainless steel models, that don't even have a spring latch. The fakes are SO similar. They flip almost identically, and are a tenth of the price. Fuck benchmade, (but fuck exiled cuterly too). I have no problem with the chinese fakes, and I don't think most people that want a good flipper for a good price do either.
Benchmade are amazing knives. You should give them respect.
where'd you get your fake? eBay?
+biteme I got mine off DhGate. flipped it as my main until I got my replicant, but when I did it was Hella nice.. came shaper then the REP... as in literally hair popping razor sharp. I loctited mine, tolerances were tight, flipped amazing, well worth the 80 I spent on it. love the sound of the Ti too. still flip it almost every day, not a single issue with it
Right on , I couldn't agree more.
overrated is benchmade.
If I want a good balisong, is a 99€ fake one okay, or will it fall apart? Just by looking at it, it seems well built.
for me, the fake one was the best option, i live in Brazil and here an BM 42 cost aprox. R$1400 and i dont want and dont have this money to spent on a Knive.
Is the fake bad for flipping?
does it really matter if you get a real or fake practice balisong
yes, because if you get a fake, the 'blade's' bolts aren't very strong and they can break making the 'blade' fly off mid spin
You're fine, get the cheap fake one, save your money. Most damages you can fix yourself, and if it breaks completely, just buy another one for 20 bucks... You can get 50 fake ones that would be good enough for a lifetime before you could ever get a real one.
Unknown I'd always trust a pig over the sinister, letter E.
A practice one absolutely not but if your getting one to show off and become skilled at it then yes it does matter
What's the purpose of a butterfly knife? I personally could never figure it out.
Its just to show off how much of a badass you are
+rusza j That actually makes sense. So it's just Bruce Lee shit. Waste of titanium in my opinion.
Buck Shot basically
Concealment.
It's like a normal nice, but it's also cool, and really fun to do tricks with.
The main differences that I could see that weren't mentioned were: The tang pin on the real 42 looked smaller and neater, it seemed quite large in comparison on the fake. Also the grooves in the kicker of the fake were much deeper and more pronounced than in the real one. Lastly, the number 42 itself on the blade was much smaller, neater, and further from the logo on the real deal.
With that being said, unfortunately, the 42 has been discontinued. This means that small changes to the design to throw off counterfeits will no longer occur and replicas will get even harder to distinguish as their design improves.
The fake might be heavier since it's steel and not ti. Though they are sandwich and thinner to help compensate the heavy weight
I agree with alot of what you say however consider the following 1# chinese consider it to be an honor to be able to copy high quality items 2# its not hurting benchmade because benchmade stopped making the BM42 and they have stated they have no plans to make it again. so where there is a demand there is a market.
If you did not have enough money for a 42 (second hand) would you get the clone?
The tang pin is usually the biggest give away.
i have one balisong but when i play it the screw is going out how to fix it
You know when you're bored when you watch butterfly knife videos
Not when u have one ordered and can't wait 3-4days for it
lmfao so true
+Maysey lol I'm in the same sit except mine is a come because they are illegal in Australia 😭😭
Yeah its so fucking boring here in Australia. (No Sarcasm)
So you're breaking the law and should be fined.
Is a fake 42 better then no 42
No.
2015 update: Now they even actually come in titanium.
+Sun Praiser Yes. To avoid AIDS.
+Sun Praiser To each their own, but I still don't support it.
***** The Benchmade 42 is not a $500 knife, it's a $170 knife that costs $500. I would never ever pay MORE than the retail price for a knife. That's why I'll never have a 42. I'd buy another 62 or 51, or an Alpha Beast or Replicant, or any other high quality balisong.
link please?
westsenkovec www.dhgate.com/store/product/the-one-bm42-butterfly-knife-balisong-knife/200974249.html
i ordered a benchmade 62 im worried it might be a fake got it from blade hq is that good plz tell me!!!!!
BladeHQ is as legit as it gets
+Edwin Castorena its legit
Many of the things you're pointing out are only seeable if you have both a real and a fake side by side, which doesn't really happen in the real world.
In reality, you won't have anything to compare the fake to.
I have experience with fake ones, and the forst thing i noticed is that the pivot screws are realy bad. I had a fake BM42 and i tightened the screws, and what happend? The broke....
I wonder which is the fake one he never even says in the video
Left
it was a joke
I recognize that knife. In fact, If I'm not mistaken I sold it to you way back in the day. I'm glad you're still enjoying it man.
-Cody Mertens (Linett)
Hey man, where you been?! Haha, yes I remember buying from you. You still flip? Get on the Jerzeedevil and Balisong Technique if you're not already there man. Good to hear from you. She is still running strong.
I don't flip nearly as much as I used to. I'm doing the college thing now. Every now and again I wonder through the forums and miss it though.
you do know that you are pointing out all of the things for the fake balisong manufacturers to improve in their fakes by making this video. xD
I doubt they need the video bro.
Can we have a link to a real one?
My mom ordered a bench made ballisong for me for Christmas, I was real happy til she started worrying because it wasn't showing up,creep in mind she ordered it on thanksgiving and it still didn't show up, we check her email and it says it's on a boat from China.... I asked her where she ordered it from and she said EBay.... I feel so bad because she payed full price for a bench made and it's a fucking cheap piece of shit. I just hope it doesn't break the day I get it.
Ah that sucks. And another reason why I don't support fakes
Well what happened?
TheMysteriousDumbaz1 is everything ok
You got it yet
@@adi-lk1zm oh yea. Thing was pretty good at first. But after like a day the entire handle broke. Rip
doesnt the blade on a real 42 have the stopper as part of the tang? not a peg tapped through a hole? your 42 has a peg
They have a tang pin for locking in open position and a kicker on the blade to lock in closed position.
I think fake is ok as long as you don't sell them as real
Reasonable.
I agree. The only thing that bothers me is the fake logo.
The new Ken Fong ones have real titanium handles and have changed the logo. They keep the butterfly but the new logo has a different name (Theone).
@@MegaBrokenstar Just bought one with that logo. Steel handles but no machine marks like the video had. Paid $45 and am happy with it. 😀👍
will the screws loosen on the fake becouse im ordering it today
clones would not be so prevelent if the origonals cost wasent so outrageous. There is not any where near 400$ worth of materals and machine work in those knives. Now if they were made out of aircraft grade Ti with a Titanium nitride coated blade or somthing similar it would be a different story.
And if benchmade still even made the 42.
Shabbernigdo Xingjian but they make them in the U.S which really jacks up prices due to our much higher wAges
nsquezada27 true but even still the price on them seems outrageous unless they are all hand made.
not really when you think about how expensive the metals are and then the process that goes into making them all handmade or not they all have to be absolutley perfect and then of course a big company like that has a lot of overhead they need to pay off so its worth it. plus the markup on retail thing can be up to 75 percent so they are actually profiting not just breaking even. and the stores need to make money to
nsquezada27 thats the thing tho the metals are not that expencive they can be found in plenty of other quality knives of much lower cost. The machine work isint that complex infact its fairly basic. i realize that the company needs to make a proffit but unless they only are making a few hundred of these knives and have to recoup all of the tooling costs and such they shouldent be 300 / 400 dollar knives.
i was thinking about buying a fake benchmade cuz i never heard of someone breaking a fake 42 and i really wanted to know if the qwality of the fake one is good
lol yeah...Ill take the heat
cutlerylover woah
@@miner1011 lol
Same
Who are you 👽
whats the different 42 and 62 just the blade?? why i cant find one of this one on benchmade page??
i know this reply was a bit late, but, i think that thay stopped producing the 42 model a little while ago.
just remember homie no everybody can afford to buy a real buttlerfly knife...
You don't have 80 bucks? 80 bucks buys you a Kimura. That's quite real. Homie.
im not talkin about me ese im talkin about poor ppl
pliners1 A Flick balisong (www.bladeplay.com/item--Silver-Flick-Butterfly-Knife-Drop--12813) is only 15 dollars but its a great beginners knife but the handles are a bit weak they won't break on ticks but I don't recommend throwing them (personal experiences).
knifezoid In my country 80 bucks is a shitload.fuck you too portugal
Kimura's are ugly tho, dawg!
Mines polished... although after a while the ti oxidises and it loses some of the initial shine.
lmao I got one more video on the FU42 coming...a viewer sent me one of the originals which proves some things that were hidden on newer versions, let the drama begin once again, whatever right, its info, info is good...
where did u get the fake one and where did you get the real one
After checking many websites i found:
Fake: 10$
Real: 50$-100$
Well I ain't gonna spend 5 times the price.
what 50$?
where is it for 50 bucks lol. i cant even find 1 for 800 bucks.
Hahahahhhahahhahahaha $100 your funny more like $400 - $600
the true's one cost around 250$, and the fake one costs 25$ in DhGate... its your decision xd
javi pulpillo I found one for 470 couple months ago, bought it love it :)
So what if I bought a copy of a 42 is it metal or is just the cheap kind of stuff
i buy chinese fake now !!!
Why doesnt dhgate sell anymore butterfly knives?
I just bought a fake one for 11 dollars. Had no idea of the original price though. Also, I didn't know Benchmade was an actual company. The model name is A316 and I don't know if I should feel bad for spending 38 dollars in total for 3 fake knives.
Ehh good video but to be honest, it is about the money issue with em, a few hundred for a benchmade is complete bullshit to me, yeah nice knife but a few hundred bucks FOR A KNIFE? thats a bit much for me tbh, i do have a fake one, its cool and close to the real deal, cause i cant afford a nice real one at the moment, also forget the money, like me we have to buy fake ones cause in the UK theyre illegal other than the trainer, and i dont fancy buying the trainer benchmade for 280dollars
You're paying for the material it's s made of, the manufacturers, the time put into the knife, and the shipping/handling for the delivery, as well as the process itself. Knives are expensive tools. If you buy one, respect it. I could save your life.
if I could buy something that would last me for an amount of time I would. seriously. but I cant so Im limited to rip offs. theyre ok. :s
Shadrik Easton He said it's machined from titanium. Assuming that's true, it should last longer than you.
***** The 42 is molded titanium. If I said machined I was wrong.
where did you get that knife? I am looking for it and I can't find it
u talk to much
Millenials...
Talking a lot in a video meant to inform people?
You don't say
Talk leeeesss
Logan Heath Listen more.
How does that have anything to do with being a millennial? He wasn't necessarily wrong, you kinda did ramble a little in the beginning. Also, some people can't afford to pay over 500 dollars for the real thing, despite having jobs. Some people need to pay bills, or pay rent. That's the reason a lot of people buy fakes.
the 42 is out of production right? is any way of getting one still?
People support local inustries. This industries keep the jobs in you country and keep your economy running! Imagine everything you buy comes from china, what do you think will happen to your community of unemployed people?
Yeah support local industry by buying a dicontinued knife ?
Noox38
It was more like general speaking.
I know and i was kind of asking you a question about what should we do now ?
Noox38
In my opinion we should support our local industries as good as possible.
Melder92
Okay you don't listen, we can't if we want a 42 we can't have it so basically we're gonna buy it some where we can still got one no matter where it's from neither how it's made
Is there a really good balisongs like the Benchmade ones, but for training? Thnx.
Honestly you can always just buy a real one and put masking tape over the blade when practicing
god damn Chinese > _
I need help I just got a balisong that looks like a benchmade but I didn't know at the time because I'm new this balisong was my first one and it is like the fake one but it's a rainbow one and it was $9 well $12 with the sheath so did I get ripped off or nah?
Cut the crap and get into the knife. Omfg
Ikr
I also noticed that the handles on the fake made more of a V shape and didn't touch as much. Im not sure if you said that, but yeah
If you're willing to pay 450 for a knife, you deserve to get ripped off.
Xd, ikr
This is a hobby for some people and even a job who are you to judge whether or not someone buy one of the best made knives in the world?
Wow, that was a great impression of a stupid person you did there
does the fake still have the benchmade ingravement
the fake one was alot brighter, too
Where can I find the fake one?
how can i get my hands on a benchmade model 42 clone?
the tang pins are different too, the chinese one has flat tang pins and the authentic has rounded tang pins
We’re you get these but the prices on these are sky higher you know any other cheaper real balisong knives?
It's safe if you got fake because it is not sharp so you don't get hurt or scar in hand right?
You can by 42 trainers on ebay but I dont know where to a real bladed one
How does one get their hands on a fake benchmade 42?
At 9:13, the "42" under the butterfly, looks like it was stamped onto the fake, the numbers aren't aligned, and are much closer to the butterfly, than on the real one.
do you know a high quality butterfly knife brand that is still in production?
Bladerunners Systems.
I m not a very smart person, nor do I have any knowledge on knives what so ever. I was just interested in the video cause I saw a balisong in a movie and wanted to know more about it. Just passing a dumb question, would it be possible to tell apart a fake one from a real one by the magnetic properties of the metal used? (one being titanium and the other being cheaper mild steel as said in the video) Again just a dumb question, go easy on me guys.
jilles de lange they have a question don't answer if you don't have an answer.
NotSoBrown "Again just a dumb question, go easy on me guys."
I went easy on him. HEHE :D
I'm not to into knives either but i think that would be an interesting way to find out
I just got one and they seem to have updated them. The one i received seems to have handles that are cast in one piece (no soldered in pieces), the tang pins seem to be heat treated better so they do not deform, the logo is etched darker, and the latch cups on the safe handle are now u shaped(instead of a full deep drilled circle) and identicle to a real 42.
where can I buy a real one ?
but is it factory new?
This must be a later gen model cause it was really really close. I could barely tell a
difference from only 1' away.
I am VERY new to balisongs/butterfly knives and I don't know much about them, however I enjoyed this video and found it very informative. Thank you.
Are there real black 42's?
where did you get it ? the fake one ?
hey how much do you want for the fake benchmade ?
What would be a good price for a used benchmade model 42?
Under $300 would be good if in good condition
+knifezoid thank you I just came across one in a pawn shop near where I live. I believe that it is a real one the man at the shop said that he would sell it to me for $230.00. The knife seems to be in good condition though the blade is rather dull. It also comes with the box and sheath. The box is some what beat up. Also it has papers inside from benchmade explaining the warranty and how you can send in the knife for $5 to have it sharpened. The blade is 440c and the handles are titanium. The spring on the lock is still strong. By the way I love your channel.
The fake ones have machine marks in the circles and the fake ones are a lot heavier and inside the handles will have blobs of dried metal inside
That's true, but some people polish up their ti 42s which can give it the same appearance.
How long ago was this fake purchased ?
That I am aware of there have been two batches of fakes. Your one appears to be
from a new third batch. The latches of the first and second batches have a flat underside
your one is domed on both sides.
How is the tang pin ? Previous fakes have a very rough tang pin.
The latch seat on the fake is a little thicker on the ends of it while the ends of the seat on the real o e are thinner. A lot of ppl possibly didn't notice that
But is water wet?
Another noticeable difference between the real and fake is that titanium has a darker tone to the metal when polished. stainless steel is lighter. if u have a titanium ring or bracelet u can use that as a reference
I know im gonna get a lot of negativity for this but where can i find a fake one? ive always wanted a 42 but its way outa my price range.
I have wanted a real one for soo long I've bought fakes and the screws loosen every time you open it please someone tell me where I can get a real one
The logo is faded on every benchmade counterfeit I've come across, and there is always a more rigid indention from the blade going into the bottom of the blade piece.
The question is how do I get one into Canada
A passport, ziplock bag and some lube.
The damage are the same ?
link of the fake butterfly knife?
amazon?
Does any version of the fake BM42 come with the paperwork inside the box like the real ones? Any info on that anybody?
should I get the benchmade 42 or the 51bk morpho
I noticed of the bat that the fake dididnt have a logo on the blade
So the right one is fake?