THE CASE RETURNS, DEMO ARRIVES AND THE NEW MASSEY HAS SOME STUPID REDESIGNS
ฝัง
- เผยแพร่เมื่อ 13 ธ.ค. 2024
- In this video our Case 895 returns with more than just a clutch!! The new Massey 7615 she some very weird new designs that make no sense, and the new Demo arrives
You can also follow us on
Instagram: / ifarmwefarm80
Facebook: / ifarm-wefarm-101507381...
Donations Paypal paypal.me/IFar...
We buy all our Tractor Parts from Contact John Conaty Tractor Parts
www.johnconaty...
Parts fitted to the Case
Clutch pack www.johnconaty...
Flywheel and ring gear
www.johnconaty...
PTO seal kit and bearings
www.johnconaty...
4 Wheel drive shaft bearing and carrier
www.johnconaty...
www.johnconaty...
3000L Diesel Tank built and supplied to us by TankFab.co.uk
They supply tanks to suit to suit everyone from 500L upwards
Check them out here
/ tank-fab-ltd-106238958...
Your dogs are so lovely. And good too, I love how they just lay around and wait for you to finish up what you are doing .. then happily acknowledge you when you speak to them. 👍🏼 .. 🇦🇺🦘
A lovely video. The case still looks modern for a 30-year-old machine.
For the lift arms use the wheel on the side Adrian
The buttons are more so for ploughing/powerharrowing etc, set your height and depth with the controls on the side pillar and you just press up or down them on the left arms
Ah, the faithful Case returns, great to see her back. Nice update, with the full compliment and the addition of the quad trailer will get you back to max efficiency. As a gardener i know what you mean, enjoy the rain Adrian 🌧 🌱
Nice one Adrian, great to see the case back, great wee tractor, no noise or vibrations in the Massey, i used to top fields on a 20 diesel, the teeth would be shaken in your head, good stuff!
Hello i have been watching your videos for some time now and i must say they are as entertaining and educational as I have seen. Your some man for one man Adrian. Keep up the good work and hope you have a long and successful life in all you do.
Cheers Denis 👍
A quad trailer is really handy for 🐑 sheep. Looks like a neat wee trailer.
Thank you for sharing Adrian. Always enjoy your explanation of Ireland farm life. Hope your country is recovering well fro Covid-19. All the best. 👍🐄🐄🚜
For the lift arms on the Massey if u want it to go up slow and accurate den use the wheel on the side of it
The old case what a beautiful old girl. Love it.. hope all is well and you and your family are keeping well and safe. All the best Martin from the 🇬🇧.
And yours Martin, thank you
You can use the wheel behind the 3 buttons for the lift arms to lift and drop them by turning that wheel
Adrian we have the 7614 I moved the tool box to the top of diesel tank. Should be 2 bolts holding the metal plate on just bolt it on through their. As for the lift arm buttons double press the up one and it works.
I seen ur massey 6470 in martins garage the other day Adrian and if u put the lift of the tractor in lower u can use the wheel beside it to lift up and down ur link arms
Great to see the Case on duty for ya lad.....! Lovely wee trailer for sure Adrian and the side off option will be sooo friggin handy at the fencing and feeding ! Rain came wooo hooo!
No worries with AdBlue on the Case 👍😂
Love the look of the case fresh wee tractor, the Massey is a beast...looking forward to another vintage restoration vlog
Trying out the disc mower myself this year after hearing you raving on about it so much 😉 let the cows graze down the field first then cut it, let them back in an hour or two later and they cleaned it out fierce well, regrowth is fierce even and responded way faster than the topper
Father is concerned that there is nothing to cool down the bed of the mower when using it though as when cutting silage the bottom of the grass being wet is what cools it but you have none of that with the topping
Never had any issues with the bed heating up, it shouldn’t happen really. There’s no comparison in a topper and mower when it comes to a faster regrowth. 👍
Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.
Greetings from the Bronx, Adrian. Been following the channel since the Celt article showed up on my Facebook. Spent my childhood summers on my uncles small dairy farm not too far from you. Great stuff! Informative and entertaining. Keep em coming 👍🏻
Cheers lad 👍
Yeah great video. Great to see the enthusiasm you have for the case. That tractor was brand new when I left Ireland. Those were the type lift arms on the case I was used to but without the adjustable length. I see all modern tractors have what the Massey lift arms are like. Looks way easier.
Hi Adrian check the multi plug under the dash on the bulk head for your dash problem thats were id start they give trouble
The Massey looks fantastic great purchase!!!
Just collected my Mf 390 2wd 3k hours amazing condition. Future classic
Preferences on a quad trailer
1) centre mount axle
2 ) big enough to put the quad in the trailer to take it for repairs or to another farm etc 👍🏻
Delighted to see the case back🤪
Do you not have skid pads on your mower
Re the case dash. I'd a similar issue on my own 4230. There was a small brown wire that needs to be attached to the negative pole of the battery. Keep up the good work.
I will look for that this morning for sure, thanks for the tip mate 👍
Sunday is here and so is Adrian ✅ best day of the week 💚💚
Loved the vlog today looking forward to seeing the next one
I was used to the levers for the arms. That was perfect I thought.
Great video Adrian as always. 🤗👍
The best time of the week
Some of your implements are catagory 2 but you’re tractor is catagory 3 for example your fert spreader tips in when you let down a good hydraulic top link with check valve helps to solve that issue
keep up the good vids ! You made my day
Good stuffy as always. Good to see the case back. 👌
Glad to see the Case back, it's an honest tractor, no laptop needed, been tededing with the older of the fleet of the next doors with an John Deere 2030 and Pheasant tedder compared with the ALOT YOUNGER brother John Deere!!! still love Massey's and my International's/ Case, because I grow up with them.👍
John Conaty is fantastic. Earlier this year we had to replace some body work on our 4200 series massey, everything in stock and delivered the next day. Super job.
I went to secondary school in Kells with John Conaty in 1967.Whenever we meet we have a chat about old times..I bought plenty of bits and pieces from him over the years including a Case MX150..
Fine looking wee case tractor best one I've seen in a long time
Well wear with the Massey Adrian and the Case is looking very nice 👍
You must be the tidiest farmer on the whole island 👌 a credit to your craft
Super video, great to see case back,bought a 4210,biggest mistake I've ever made,near broke me,unlike int 674 which still is very reliable tractor.
Your not the first to say that, they were i little more troublesome in fairness. Them 674 were brilliant, drove one for years on a farm I worked on
I’d say your glad to have the case back. Cracking video as always Adrian. Keep her lit.
Great video Adrian the case looks great
Another great video Adrian great to see the case back again.
Nice 👍 to see the case back Adrian keep them coming stay safe 👩🌾👩🌾👌👌🚜🚜🇬🇧🇬🇧🏴🏴
There should be a small wire that goes down to the battery for the dash check around the battery box it may have broken off .
That trailer is handy for moving baby calfs from sheds
Life is so much easier when you have the proper tools for the job. Comfy & quiet is so much easier at the end of the day 👍
The rocker is for pre set up and down work ie. Ploughing Harrowing using your new grass sower if you activate the down motion you can use the roller controller it's much safer and easier to control
Case back Adrian your flying now 👌
Had the joy of new Massey 7719 last week drawing bales never had so much comfort nicest tractor I ever drove a tip buy yourself a sparex hydraulic top link have one 10 years now never use old one again
Grate video adrian our boys just love them.
I have a feeling the trailer could be staying for a lot longer you seem to like it all ready 👍👍
Ya I fear that myself 🙈🤣, we’ll c how it’s goes. Thanks Dean 👍
That case is in some shape definitely been looked after, she's like me doesn't look anything like her real age👍
The ferguson 20 will be a handy tractor for the power washer 👍
Fergie 20 pto not strong enough to give sufficient pressure on power washers
@@MOOBOOSE why wouldn't it? I'd be very concerned about the engine in a tractor if it couldn't run a pressure washer at 540rpm
If shes not blue she'll not do plenty strong enough to run a washer at 540 👍🏽
pleased to see the case back job well done massey looks nice blenty of power
Super quad trailer we have 1 super job 👍
probabley an idea to buy a trailer big enough to put the quad in the back off if you need to take the quad somewhere
Yes I have no be already, my 10ft nuggent is there
Did you replace the input shaft that had splines 1/2 worn where it connected with clutch?
Yes that’s the one 👍
The tyres on that massey look very well adrian.
Great video again guy's. Hardly use my toolbox on Massey ferguson too.😅🌟
Great video
U should have your spool valve lever in floating position Adrian maybe u do but it looks like u didn’t. Great video. Keep up the good work. 😀
Yes it normally is, probably too busy giving out about them link arms 😜
@@IFarmWeFarm happens to the best of us😀
The lift feature is for safety but if you hit the up/down button the second time it should stop the lift from movement instead of hitting neutral 😀
We have a couple of 77 masseys and for the tool box idea we take them all out and leave them out because lost the one on our very first 77 so we have one in the cab 👍🏻
The tool box is the same as the ones on the fendts and the lift inside is pretty awkward in the fendts aswell
I was passing through Monaghan the other day and everyone was doing hay, was it a similar story up in Monaghan
Well done great video 👍 lovely handy tractor hope it goes well for you
I've been waiting on this 😎⭐ that case is a nice wee tractor 🚜🚜
Hi adrian. Any chance of a school bag being added into the merchandise section.. great videos...
I’m looking into that this week, have had loads of requests for them so there definitely something I will speak to our embroidery company about for sure.
Great video 👍 nice trailer 👍
Hi Adrian, thanks for all the great videos, can you send me the link for the new oil tank u got, thanks Peter Finnegan here from monaghan
The tankfab diesel tank is an impressive bit of kit.
Great video Adrian tidy spot
Brilliant video Adrian 🚜👌👍
Very good 👍look forward to next one
Adrian under the cab u can set you clutch pedal
No lights on the trailer?
I had a 5130 case and it was something to do with the alternator that the dash did work right
Great video Adrian.. really enjoyed this one 👍
Cheers lads 👍
In inside camera shots of the Massey are very nice Adrian and as you say on Instagram the big red bonnet 😎👍👍 great videos Lad keep them coming
Great video and great contents
One question about that nugent quad trailer when your driving over bad ground has it hit off the box thats on your quad just that i see the way u have it??
It’s never happened, even with the last trailer which is more or less the same clearance wise. I wouldn’t worry about that at all
@@IFarmWeFarm just wondering 👍👍
Adrian the demo trailer is very nice
would be good to see the dash repair on the case when you get the fella in to look at it
great content as normal
Hi there.
New SUB'r.
Your fuel pump...
Is the fuel tank in that box, or is it in the shed\somewhere else.?
If it's in the box itself, how big is it.? Cos it looks awful small to me.!
LOVE THE VIDS
KEEP'EM COMING
RICH(UK) 🥰🥰🥰.
Great to see the Case back, would you not use a hydraulic top link?
Not for mowing, we have a few for other machines but I like to set the mower with a top link
Loving the videos . 👍🏻
You can mount a spurious toolbox on the metal plate in front of the diesel cap . Remove the metal bolt on to the plate and refit the metal
Yes that’s what exactly what I’m planning, trying to find something suitable somewhere. Checkered plate perhaps
@@IFarmWeFarm a friend of mine has chequered plate aluminium ones on his masseys and waterproof I will find out where he got them for you. I have a spurious one the same shape and size as a John Deere with no Deere logo on it does the job Conatys would have them I got mine from our Massey dealer
@@IFarmWeFarm I asked my friend where he got his toolbox Byrnes trailers in Bunclody Wexford it’s a small box normally on a ifor Williams but not too big to fit on the Massey fuel tank
@@claetuswoodroofe4164 can you ask him what dimensions it is please, or even forward a photo of it to me on Instagram or Facebook, much appreciated
@@IFarmWeFarm I will do that what do I find you under on Facebook
You don't have to press the button for the link arms every time there should be a setting to change it
Did you ever consider a loader on the new massey
No not really, it would be very awkward around our tight yard
Can I ask 3 questions about the trailer if fully laden does it stand level , has it a stand of its own if you take the quad bike off ? Can you fit a 2nd quad onto it, take it down to a 2nd farm . 3rd question if fully laden your taking the quad off how easy is it weight wise ? Thanks 🙏
Good video Adrian trailer is a nice job
The newer masseys have gone back to the rocker switch and the tool box is on top of the desiel tank
You should buy an hydraulic top link for the massey, so can adjust on the go.
Have a few of them, just don’t use them on the mower so I have more precise adjustments on the cutting height
What type of mower is it you’ve got looking for a one like this and don’t know the name
Adrian, we’ll worth the money. If you tried to buy a Telehandler, with the money you spent, you wouldn’t get much of a machine!
Great video again Adrian, great to hav Case n loader back, when get used to loader u'd be lost when it's gone, keep up the good work (farming & video editing)
Adrian where did u get your box on the back of the quad. Does it sit in place OK?
Clarke’s of Cavan, yes it will never move. Very Very handy
Great vid Adrian.The Case looks spotless.Stick a straight pipe on her she,ll look d job👍
The little swiffler thing on the top link throw that away and get a hydraulic one it will make a big difference and it will be handier
Tool box is poor alright when muck builds up on it need a Vise grips to open it.
There is no way that tractor is 1991. Two good to be true