ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2021
- Here you can see the products which i used in this video
AliExpress s.click.aliexpress.com/e/_9z48kt
Here is a video about disassembling a Chuck Bosch with blocked jaws.
Battery Spot Welder • DIY Battery Spot Welde...
Thanks for watching . And do not forget, Like and Subscribe
Due to factors beyond the control of BOSSY DIY, it can not guarantee against unauthorized modifications of this information or improper use of this information. BOSSY DIY assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. BOSSY DIY recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of BOSSY DIY, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not BOSSY DIY.
If you want to use this song Jarico - Landscape [NCS BEST OF] in your project you must copy & paste this into your description:
► Jarico - Landscape : / la. .
► Jarico - Landscape [NCS BEST OF]: • Video - แนวปฏิบัติและการใช้ชีวิต
![[สปอย] มหาเวทย์ผนึกมาร 261 "ร่างโกโจโดนขโมย" ชายที่อยู่ตรงหน้านี้เขาไม่ใช่อาจารย์โกโจตัวจริง!!](http://i.ytimg.com/vi/u5GTa2Mpp_E/mqdefault.jpg)
Man, you are a lifesaver. Thanks. I also like that you did not give us a detailed description of your family's problems. You got right to the point very quickly. 👍👍👍👍👍👍
But I want to know about his sick cat and canaries. Awww. LOL
But....... how is his family doing? WE NEED TO KNOW!
I just had to watch this because I didn't know how to get the chuck off after I unscrewed the 25 torx! Thanks!
Thank you very much for sharing this information.
Congrats for for your Excellent invention.
how the jaws are strucked your find out effort is nice
Always wondered how those Chucks work thanks
Glad to help
Fantástico este trabalho. Obrigado por mostrar como é um mandril no interior, o que avariou. Amei este vídeo. Parabéns e muito obrigado
Appreciate, thanks 🙏
Wow!
Any idea if most (or all) Bosch use torx t25?
I’ve been trying but using a 1/8” Allen with no luck
On some chucks, if the jaws are retracted all the way back and wont come out again, the following trick can help: Stick the largest shank/drill which still fits into the chuck all the way to the back.. Then tighten it. This can recover the jaws. Though this can only work if nothing has been broken before.
Thanks
do you have to get torx t25 bit? is there an equivalent hex bit that will work? Yes I've googled it but I'd rather get advice from the people commenting here and Bossy DIY. thx.
For opening I used torx T25
What size allen key did you use. 10 is too won't fit and 8 is too small.
Hola, acabo de comprar mi primer taladro a medio uso GSR 10, 8 Voltios mi pregunta es cuando funciona es normal que tenga un olor a quemado
Just wondering, does the replacement you used work on a BOSCH PSR 1800 LI2?
hi
I don't know, You can try if you want, it worth it.
because the size is about the same
Thank you so much. The tips about the use of torx 25 and turn clickwise were perfect
I like a guy that's willing to take something (totally destroy) apart just to see what makes it tick!
Thanks and I just find out that you can simply use el cheapo generic 13/10 mm NORMAL key chuck as long as it has 1/2" 20 UNF thread shank. Most 10mm dril chuck use 3/8" 24UNF which is smaller, and most 13mm will be more likely to have 1/2" 20 UNF. The keyed normal chuck will actually act like "Bosch one hand" keyless chuck. I reckon using generic keyless chuck will need 2 hand operation as it's not aware of Bosch idle locked shank.
Have you tried this? I want to fit a 13mm chuck to my bosch 10.8v.
If I understanding your comment correctly this will work fine?
@@nathanhedgeley8016 It should, but to double check read the markings somewhere of the original chuck. Look for the UNF numbers, 1/2 or 3/8. Use magnifying glass if necessary. I did try but using the newer GSR12. But I guess Bosch never use 3/8 since I also have corded 10mm keyed chuck drill which also use 1/2 UNF. Except perhaps their mini 6mm drill (never had one). Even the original 10mm keyed chuck is using same key size normally for 13mm chuck.
thanks.
Welcome!
Pardon, oū avez-vous acheté le mandrin s’il vous plaît ? Merci 👍
Sir,i only manage to unscrew it while my chuck stuck real bad,i been smash it with hammer few times it wont even budge,same brand same model as in the video
boos tanong k lng po kng saan makabili ng switchbosh portable
You can take em apart without destroying them...
👌🏾
All good but mine are jammed about 3/4 closed cant get a screw driver in here.
Bosch is shite its the 3rd one ive had in 4 years. My black a decker ones never went wrong till i dropped and broke them
Hi
Anyway the chuck is damaged, try to cut half of the chuck so you can access the screw and then with an Adjustable Pipe Wrench fix it and force it with the hammer
Im getting to the part where you hit the Allen key with the hammer and mine won't unscrew still 😢 it worked on my old bosch but my new one just locks up
It probably tightened a lot more or the paint on the screw is fresher and stronger. The principle of disassembly is the same
Can someone tell me what size alley wrench was that?? I followed step by step all the way up until that part because he didn’t show what size
Ever get an answer? Same here
What key are you talking about?
What key are you talking about?
To open the chuck, a simple Allen key is used that is clamped in the jaws of the chuck
@@CMCdiy @1m25s
What parts of drill that you replace man
In this video I show what is inside the chuck
how to destroy the chuck & to know inside, thanks
And if it wasn't knackered before it is now. Amazing now we have a ideo to show us how to F--k up your chucks for good.
in other words you need special tools to fix a simple tool. That modified allen key could be replaced with what?
Here we are talking about a chuck with locked jaws, to be able to undo it we use anything that fits in the available hole or we clamp it in a vise
beli d mn bos cuk nya
Agar drill bit fas Jaye to kaise repair karenge?
if the jaws of the chuck are blocked, cut half of the chuck so that you can reach the screw that fixes the chuck
C’est génial, c’est exactement ce qui arrive sur ma visseuse , sauf que j’ai un embout bloqué dedans , et je ne sais pas comment faire autrement que tout démonter. Ça aurait été plus simple pour moi .Merci pour votre vidéo, une Mamy bricoleuse très attentive à votre magistrale démo.👍🫶
Thanks for the appreciation, to remove the bit you can try with pliers, tighten the bit with the pliers and make a lever with the chuck, little by little.
🤗
So what's the lesson here? Greasing more often?
dude, you actually cut it open....is this how you repair most of your tools?
I cut it so you can see what's inside.
This chuck has deviated jaws and is blocked, the only solution is to replace it with a new one.
Cortava a capa em duas partes era mais fácil
Itu servis atau bikin ancor bang😂
Ini bagus 🤗
E melhor jogar fora e comprar um novo
That's what I did, except that I opened the broken one to see what's inside
Funny, another video shows to turn it counter-clockwise, but you show clockwise. I'll try clockwise now because it aint goin' nowhere counter-clockwise. By the way, it's a piece of Chinese junk masquerading as a Makita. In my case, the jaws are all misaligned, won't turn.
The viewpoint from the front facing the chuck: the inner screw is open reverse (clockwise). The chuck itself open nurmally counter-clockwise. Since Bosch cordless drill are spindle lock automatically it won't be needing "hammer once for the chuck" like corded drill (free spindle).
@@supeskrim I'll try anything that works. I even liked that Chinese replica, it did a good job until the jaws locked in place. I guess it's time to throw it away after another try.
Thanks for your advice.
@@supeskrim Maybe I'm not clear about my situation. Yeah, the jaws are locked, but one of the jaws is not in position with the others which is causing the problem. It's halfway retracted and the others are in a different position.
Those jaws should be aligned. You have a blocked chuck, you have to get to the screw inside the chuck that loosens in the direction of threading and then force the chuck to unscrew normally in the direction of threading
For the same reason I also changed the chuck.
Effing adverts